Boot Camp - External DVD Reader (Mac Compatible)

To all,
I am not able to get Boot Camp to load vista from the external CD-ROM since the internal one is totaly disconnected. It does nothing. It spins the CD when it restarts then continues on to loading the login screen.
Bare with me - this is the fun part -
I got a 24" white iMac. CD-ROM was stuck and refused to take in new CD's. Took it to Apple, they replaced it. I bring it back home 2 days later and the screen is dented. They fix that in 4 days. Now I am finally able to start installing Vista.
Put the CD in - nothing happens - it kicks it out!!!! Well - its brand new - its even a different brand than what was in there before.
I take it back to apple, i give the lady all the **** in the world because this is not supposed to happen, etc.
They decide to give me a new iMac. While I am waiting, the manager approaches me and give me the 13 cents which were found in the cd-rom drive (thanks to my kids)
So I appologize - totaly ignored her wanting $450 to replace it, so I went and bought a Sony external DVD reader, burner.
-- Problem --
Boot Camp, Front Row + the DVD player software won't work off the external drive.
I took the mac appart - disconnected the dvd-drive from the motherboard thinking that if its not there, then boot camp will attempt to run off the external drive.
Put it back together - and rebooted - everything came up fine until using front row or the dvd player.
Boot Camp still won't read the external drive - no errors nothing - it attempts then quits and moves to the login screen.
Guys - I need help - i make my living off Windows so not having access to it - its killing me.
Please do not recommend parallels or anything else like it.
I am willing to try anything at this point. Before I go and spend $450 i will rather buy a new machine.
HELP!!! Anyone Please!!!!

I doubt there is any way to get the external to work with the Windows install. It's magic that the internal works! However, since you are not afraid to rip the iMac apart, a Google of 'imac internal dvd drive' shows that you can get a replacement for well under $450.

Similar Messages

Boot Camp - Windows can read Mac disk, but cannot write to it

iMac OSX Snow Leopard. Windows XP.
Can anyone help me resolve this. I have installed Windows XP using Boot Camp. The Windows folder is 31GB using FAT32.
Windows can read from the Mac disk, but cannot write to it (I get an ACCESS DENIED) error.
I have checked that permissions are set to Read/Write on the Mac, and have run permissions manager to check all is well. I have also tried deleting and reinstalling Windows, and creating a second User on the Mac.
When I boot into OsX then I can write to the Mac hard disk from another (Windows) computer on a network.
I think this did work initially, and it stopped working when I changed the computer name on the Mac (though this might be a red herring -- but it did definitely work OK yesterday).
I'm a new convert to Macs, but am experienced with Windows machines, and I would appreciate any pointers.

This is by design. The driver that allows access to the HFS partition is read-only. This prevents any possibility that Windows viruses could become an attack vector against the Mac OS. If you need to transfer files between Mac and Windows, you can always use an external hard disk or memory stick formatted as FAT.

What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

I have an LG GE24LU20 and works great with either my iMac or Mac Mini.
LG GE24LU20 Optical Drives - 24x External Super-Multi DVD Rewriter - LG Electronics US
Heck' I can even open and close the tray from my menu bar icon,
plus it is way faster and less finicky than the superdrives.

All users GONE except for "Other"...and CANNOT boot from External DVD drive

I booted the iMac (Intel...the last one with the White Bezel) tonight, and all of my users were GONE except for "Other." The internal Superdrive has had a disc jammed in it for months, so instead I have an OWC external USB/FW400/FW800 DVD drive. Snow Leaopard.
I need to boot from the SL install disc, but that must go into the external drive...which, as it's been since I upgraded to SL, the Mac sometimes sees and sometimes doesn't. Right now it can't see it. Which leaves me a big pile of crap, doesn't it?
So, what to do? I can't boot the internal drive because it's jammed with a DVD (or I spend $300 to replace what should be a $20 optical drive in it), I can't boot the external DVD drive because the iMac w/Snow Lepeord can't see it, and, meanwhile, all of my photos, etc., are on my Time Machine backup drive...which, as long as I can't do any of the above, just sits there...useless.
Can you tell I'm a bit frustrated with this?
I've reset the PRAM. I've rebooted. I've held down all sorts of combinations of keys. I've tried every single interface type on the external drive and the same thing - the drive can't be seen by the computer.
Has the internal hard drive failed? Nope. I'm tying this using the Firefox browser that's running on my Windows XP installation via Boot Camp on the internal hard drive.

Thanks, but no luck so far.
I have an old iMac G3 downstairs, and I connected it to the machine via Firewire. I could see the disk on the 24" iMac, its folders, etc. I wanted to see if I could install OS X via Target Disk Mode from the old machine to the new one, but it's a PowerPC machine and you can't do that. Maybe you can't do that from ANY iMac...I'm not that experienced.
Now the iMac isn't booting at all to Windows via Boot Camp - it's been booting for 45 minutes now with the "WinXP" logo, but nothing. I'm about to throw it in the car and haul it over to my parents, who have both a Powerbook and a 27" iMac. Maybe it'll work there. Who knows.
Other ideas...replace the internal hard drive (cheap)...if that doesn't work, I'll just sell the thing. I'm not going to sink $300 into the thing when I can get a new machine for around $600-$700. I may go to a Windows7 machine on the desktop and a Powerbook...maybe even an iPad.
I really want to love this iMac. It's my first (well, I did have the G3, but that was just to play with) Mac. It's given me a ton of problems since I bought it new. It's always been a "stock" machine - nothing weird done to it. I was hit with an iMovie update once, and that broke iMovie. Even the new iLife 2009 didn't fix it. Then, the internal optical disk drive failed. I couldn't believe that Apple used a proprietary optical drive rather than a stock Pioneer model. Price for the drive alone? $200.
I installed Snow Leopard 2 months ago, and that completely broke my ability to use external optical drives. Sometimes they work...most times they don't. This is an ongoing problem that many people are having (check the forums)...but no fix. Where does that leave me? With a useless computer.
So, I've boiled it down to this: I love the Mac software. I hate the hardware. Sure, it's pretty, but if something goes wrong, get ready to pay. I hate that Apple knows about problems, yet does nothing to address them, like the problem with external optical drives and Snow Leopard.
I bought the Mac because I was sick of Microsoft not being able to simply produce an OS full of security holes. Often times I read people bashing supposed "driver ****" with Windows, but look at what users of Windows machine are demanding of Microsoft - "please make my software compatible with the trillions of combinations of hardware that can run the os...all the way back to stuff that was created in the mid 1990s." Meanwhile, from my experience, Apple can't get their software to work with their own proprietary, supposedly vertically-controlled hardware.
Windows7 is a not bad OS. It's got it's faults, of course. But, if my optical drive failed in a Windows box, I'd have it replaced in 10 minutes...with a bluray drive...that can write...for under $100.
I use my computer for pictures, etc. In fact, we were ready to send off to iPhoto for our yearly photo books. That's not going to happen, as the photos are forever trapped on my Time Machine backup drive (lesson learned: dump photos to a generic format...fat32 works...just in case you decide to switch from Mac to Win7). iLife is great. MS Office is great, too, on the Mac. I love the little things the Mac does right.
After years of screwing around with my Windows box, I wanted a computer that acted like a consumer electronic device. That's not what I've gotten.
Ugh, so now do I buy a Mac Mini for $700, a new iMac for $1,400, or a Macbook Pro and a mac mini?
...or...do I continue to work within this silly Ubuntu Linux world?
Whatever the answer, I wish I didn't have to ask the question now.

Macbook pro cant boot from external dvd device please help !!!!

hello everyone please help me i have macbook pro 2011 core i5 version
i just installed 2.5 ssd as second hdd
i cant boot from external dvd device to install any os the external dvd keeps on spining and mac is just thinking it doesnt show press any key to install
it shows the device when a boot into mac parition
i am trying to install windows on origianl 500 gb hdd and linux on ssd
but not luck
the external dvd drive works i pluged into my pc and it works
please help thansk in advance
200 gb mac
300 gb windows
120 ssd linux

I do not know about Disk Warrior but if you have a compatible OSX on an external HDD you certainly can boot the MBP. Use startup manager:
https://support.apple.com/en-us/ht1310
Ciao.

Ibook g3 M2453 boot from external DVD drive

Hi, I'm Simon from Germany.
I have an iBook M2453 Mac OS X and a lot of dvds.
But the iBook has no DVD drive. So I bought an external DVD drive. But no matter what I do during boot (press the C key or alt)
I can not boot from external DVD drive.
Please help me
Thank you.
Simon.
PS: I have translated the text using Google translate

Hi Simon,
the iBook is able to boot from USB, but this is not expected behaviour and not supported by Apple.
http://support.apple.com/kb/TA20554
There are some external enclosures that do the trick.
But only when you press ALT after Power on. (Select a startup volume via the Startup Manager)
External enclosures with Prolific PL-3507 chipset (Firewire/USB Combo)
You will find them on Ebay Germany
I have a Delock IDE>USB 2.0 enclosure for 2,5" HDs
http://www.delock.com/produkte/gruppen/Geh%C3%A4use/Delock_25_external_enclosure _USB20_42365.html?setLanguage=EN
that works also.
Hallo Simon,
das läuft nur mit einigen wenigen externen Gehäusen. Such auf Ebay nach "PL-3507"
und nimm eins mit Firewire und USB Anschlüssen.
Ein Festplattengehäuse von Delock für 2,5" Festplatten ging auch ( Link oben)
Ein Boot ist nur möglich wenn du die ALT Taste nach dem Einschalten drückst und dann über den Startup manager dein Boot volume auswählst.

AMD Crossfire, Boot Camp, and the new Mac Pro Issue

Hello, all.
I have a new Mac Pro (Late 2013) with 6 cores, 32 GB RAM, and dual D700 AMD graphics cards. I'm using an older 30 inch Apple Cinema Display (with the dual link DVI adapter). I've successfully installed Windows 8.1 under Boot Camp. Here's my problem...
I understand that for the new Mac Pro under Boot Camp enables AMD CrossfireX by default from multiple sources online. However, it's disabled on mine, and every time I try to enable it (and hit "Apply" in the AMD Control Center), it disables again.
Is Crossfire only available for use with a Thunderbolt Display attached? Could that be the problem? Or is the AMD Control Panel lying to me?
Now, games in Windows are still running well... But I'd like to take full advantage of the dual graphics cards in the new Mac Pro with Crossfire. Any help is greatly appreciated, thanks!

Fixed it!
So, not only would Crossfire not enable under Windows 8.1 on my Mac Pro in Boot Camp... But Windows started crashing massively. I was about to wipe Boot Camp entirely and try a clean install (even though the only three things I'd installed were Windows itself using Apple's exact instructions, Steam, and Skyrim), but decided in a last ditch effort to try disconnecting and reconnecting peripherals.
Turns out the culprit was my Belkin Thunderbolt Express Dock.
Disconnecting the Belkin Thunderbolt dock not only stopped Windows from crashing, but now I can enable Crossfire, as well!
Now, this is especially strange since I have read elsewhere that people have no problems using the Belkin dock under Boot Camp with other Macs... This issue is probably isolated to using it in Boot Camp with the new Mac Pro. But disconnecting the dock from my Mac Pro has solved not just one but all of my Boot Camp issues. (Of course, using the Belkin dock under OSX on my Mac Pro is no problem.)
Long story short, if you have a new Mac Pro and plan on using Windows 8.1 under Boot Camp, don't have the Belkin Thunderbolt Express Dock attached.
I'm going to contact Belkin and tell them what I've discovered.
Hope that helps y'all.

I want to use Windows on my Mac, but Boot Camp doesn't work (Mac OS X 10.7.3)

Everyone knows that w/ Boot Camp you can use Windows on Mac, but I can't.

common issues:
downloading the drivers with Boot Camp Assistant
Not reading the guide from in Boot Camp Assistant
Wanting to use XP (not supported)
Not enough disk space
Space is too fragmented - and people don't know or understand the error or how to even backup and then erase and restore (very basic part of prevention and use of computers).
http://www.apple.com/support/bootcamp/
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.

Hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game on the windows and i cant find a proper program to actually setup the game someone help me please

hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game

Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.

Install windows 8.1 on windows 7without external DVD-reader? - thinkpad Yoga

Hi!
Just entered the community as i recently bought a lenovo thinkpad S1 yoga. i am very satisfied with it overall, but right now there is one thing that bothers me. It came preinstalled with windows 7. Now, i did get recovery CDs with windows 8, but i do not currently have an external DVD to make use of them. Now, my first thought was that there must be a way of installing windows 8 without the discs, because of the windows 8 sticker at the bottom of the Unit that basically says it has (had) windows 8 at some point, but i havent yet found a solution.
Would anyone know how to move on from this point? except from bying the external dvd-reader and use the CDs?
cheers

not 100% but don't believe bootcamp support that or even if windows itself does
thing is that if the usb drivers are loaded later then the bootcamp come into play the bootcamp bootloader can't detect the hd

Lost Boot Camp Partition in my Mac , I can´t install OS X Leopard in my iMac

Lost Boot Camp Partition in my Mac , I can´t install OS X Leopard in my iMac. Thank You

Impossible to answer with information provided

ThinkPad External DVD Reader / Writer USB 2.0??

Hi, one of the largest online selling and buying website in New Zealand, trademe, has listed via a buyer a ThinkPad External DVD Reader / Writer USB 2.0. One of my friend bought it and found that it is shown on the computer hard drve as a Philips DVD RAM SDVD 8821 HUSB. The buyer claimed that it is a genuine product bought from IBM shop. I am asking if there is a possibility for that to happen? If it is a fake product of IBM, is my friend liable to buying fake stuff. I think she was duped to think it is a genuine product. I asked this question via the IBM Australia. The respondent told me the model number was "Part Number - 43N3264". I had a search on google and the part number of the leveno external drive is not similar to the one I bought from the online shop. Mine one has got the logo of "thinkpad" on the bottom right hand corner. Whereas the external drive with the part number 43N3264 had the logo of leveno on the bottom left hand side. That's why I need to ask you in this inquiry. Intuitively, I don't think "thinkpad" has manufactured external drive. It has only been used as laptop models. Thanks for your attention.

there are several fake ones on the market, some are well made while others are not.
AFAIK the genuine one don't have a thinkpad logo, but rather a Lenovo logo.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I can't install Boot Camp Windows drivers from Mac OS X v10.6 install DVD

1- I already installed Windows 7 Ultimate 32 bit using Boot Camp Assistant 3.04 on my new Mac Book Pro 13" purchased this week, on a 60 G partition.
2- While in Windows 7 and after inserting my Mac OS X installation DVD, the screen displayed the Auto Play "DVD RW Drive (D:) Windows Support "
box where I selected: "Run setup.exe Published by Apple Inc." and double click on it
3- Then the Screen showed the "Install Assistant" with two options on it instead of the supposed "Welcome to Boot Camp Installer" . The option were:
Remote Install OSX and DVD or CD Sharing.
4- At that point I didn't know how to continue, so I quit the process and now I NEED YOUR ADVICE ON HOW TO.

i tried to download the windows suport SOftware "boot Camp" and it freezes!
No i can install the boot camp, but does not acept the windos 7
It runs all to the end the installation of windows, Then it begins, creating a new user, and when it will start , it CRACHES!
Jesus with the Lion it wasn't so Hard to install it!!

Mac Compatible External DVD Burner Not Compatible?

I just recently bought the New Samsung Slim External DVD Writer SE-S084. It does not respond at all. It gives me no desktop icon when I plug it in via USB(which is it's only power source).
It claims on the box that it is MAC Compatible, OS requirement for MAC is version 10.4.6 Tiger. I'm updated to 10.4.11 so shouldn't be a problem there. In my search I came across somebody who had the same issue with the same Samsung product, and with a firmware update recommended by another poster, their problem was resolved. Everything worked fine.
Both of my EFI and SMC firmware is updated. Could it be I have to reinstall the firmware?
I also tried to use PatchBurn with no avail. Do I need PatchBurn?
I am so lost. Can anyone help me with this? It seems like a simple solution has to be out there, I just can't find it on my own.
Thanks!

I am a little bit miffed at the fact that you have a newer Macbook and you have a problem with the Optical drive. Did you restart the computer and select OSX instead of Windows, then open Safari and then go to Samsung's web site, and support then find your model of external and download the drivers for it. They should open and run automaticlly, if not they will give you the instructions on how to download them. When you do this make sure you have the external plugged in. I would also make sure that you are plugged into the USB-2 port, and not the USB-1 port.
If all that fails Google for your model Samsung and type in SAMSUNG EXTERNAL SLIMLINE DRIVERS FOR MAC. then hit enter. many times you can find opensource drivers there that are better than factory drivers.
Check as well and make sure there isn't a recall or a fix from Apples Site for your Internal Optical drive. It simply doesn't make since that you have a failure on this newer optical drive.
Did you Run Macjanitor, or Cache OutX, or Onyx, and did you repair permissions. Any one of these or a combination could fix your problem if the optical drive isn' fried.
Any of the software mentioned is FREE and you can Google for them.

Combo Drive reading Dual Layer / booting from external DVD USB

I am helping a friend with an iMac G5. He has the combo drive which is not able to read the dual layer Leopard DVD. I have looked to see if there is a firmware update for the drive however no luck. I am able to put an external usb DVD and it reads the disk however I was not able to boot from the disk using keyboard commands I tried AppleOption+ShiftDelete, C, and also tried Option but no luck.
I have been reading that booting from usb external drive is a no no on older G5 iMac's unless you are using fire wire. If any one can give me some help with getting the USB drive to boot, or figuring out why the combo drive spits out the DVD every time I would appreciate it. I am also willing to make a bootable usb leopard thumb drive, but I don't want to waste my time if it's not going to boot from USB.
Thanks,
jtadmin

Do you happen to have a more recent Mac that can read the Leopard installation DVD?
If so, you may be able to start up your Mac in FireWire Target Disk Mode,
http://support.apple.com/kb/HT1661
and let the iMac G5 use your Mac's optical drive to boot from the Leopard DVD.
Also, it is true that PowerPC Macs can generally only boot from external drives that are FireWire.

Boot Camp - External DVD Reader (Mac Compatible)

Similar Messages

Maybe you are looking for