Boot camp files do not show in Mac following Windows restore

I am trying to increase the size of my boot camp partition (using Winclone to create an image).
This is my stupid messing around which created the problem:
I had previously tried changing the partition sizes, repartitioning my HD: making windows bigger (uninstall via boot camp, reformat drives, reinstall mac from time machine and windows from boot camp). This worked fine, but I stupidly tried restoring my files mannually in windows using my file backups, but this messed up the location of some of my files (e.g. creating another C folder within the boot camp (C) partition). So I started again: I had made a system image of windows using the windows backup of the partition, before I physically changed the files.
This is what I did to fix it:
I reformated my drives back to the previous size (making windows smaller, uninstall, reinstall via boot camp assistant; and mac larger) restored windows using system restore in windows. I was able to restore to the previous windows system image, and I can boot up windows using the option key at start up.
This is what I'm left with:
However now the boot camp hd icon is called 'untitled' (not boot camp), and contains no folders (disk utility says it is practically empty). I can't repartition my drives if I am unable to clone the boot camp files (e.g. using WinClone) from the mac partition.
I know the windows restore worked, because I can boot in windows, it seems my mac partition is no longer reading the boot camp side? How do I fix this? How can I find the boot camp windows partition files within my mac?
Thanks.
I have a mid 2011 iMac with Lion OS X 10.7.2, and Windows 7 Home Premium 64 bit.

Is there a way to do this that doesn't cost money?
What is the problem with my boot camp? Is it the mac side not reading the boot camp files?

Similar Messages

Can't install windows it says the boot camp partition is not formatted as a NTFS file structure

Using boot camp assistant it gets to the point of installing windows 7 and it won't because the boot camp partition is not a NTFS file structure. It also seems strange to me that there are 5 partitions would have expect ether 2 or 3. Please help this is very frustrating.
Thanks in advance

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

I have a mac pro wich will not open windows in boot camp i get to the two options select windows but iyt will not load can you help please

i have a mack pro which will not open in windows from boot camp get to the two options and select windows drive but it will not open can you help Please

Hi there, Well, i thing i might have had the same problem (if you dont mean the selecting part, then try keyboad with usb and without if u dont have a macbook pro or so), i did the same and after selecting windows it said "No bootable disk" or " no boot disk" or something like that and the installer wont start when i was trying to install via CD/DVD.
The sulution is to use 2 usb-drives, one for the support drivers from apple and one for the windows it self after burning the CD/DVD to the usb on a PC using the windows own tools and creating a ISO file.
(there might be problems whit CD/DVD install sometimes)
The ISO file on a own USB is the most importat thing!! (and even apple and windows didnt know that but me and a technikal support guy from the store i bought it managed to fix it after like 4 days )
Hope it work now mate!

Boot Camp Partition no longer shows in StartUp Control Panel

My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
Any suggestions?

Hi,
if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
(Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
But as long as the Option-key is working maybe you can live with it.
Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
Regards
Stefan

Boot Camp Assistant does not allow partiton when my disk is the right format

Boot Camp Assistant does not allow partiton when my disk is the right format - (Mac OS Extended (Journaled) volume).
When I go to the Boot Camp Assistant to partition the Macintosh HD disk, an error comes up saying,
"The disk cannot be partitioned because some files cannot be moved
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Please help me out! I would really appreciate it!

I was not allowed the Repair Disk option. I tryed Verify Disk, and an error came up saying,
"The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
What should I do?

How do I remove the Windows partition? Boot Camp Assistant does not allow me to select the remove option.

I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?

You can try removing it in Disk Utility.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed.
You should now have a restored single volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Windows 7 will not show my mac partition

I just bought my mac mini (mac os x yosemite) and installed windows 7 professional 64 bit onto it using boot camp.
There's no problem with my windows 7. Just that I cannot see my mac partition on windows 7.
I had an old mac using mac os x mavericks and I installed windows 7 on it as well.
I can see my mac partition on windows 7.
May I know how to fix it?
Thanks a lot

Please see windows 8 does not recognise Macintosh HD, No drive Letter
Yosemite converted JHFS+ to CS volumes for which Apple has yet to provide a driver.
If you are on Mavericks, there is no CS volume by default (unless Fusion drives are in the mix or FileVault2 is used). Apple has read-only JHFS+ driver in Bootcamp, but no CS compatible driver.
You can verify it by running diskutil cs list on the OSX side. If it returns any output, Windows cannot read such volumes.

Is Boot Camp a backdoor into password protected mac?

Hi!
I Have an iMac 27" with snow leapord and windows 7 pro 64 throgh boot camp installed on it. The Mac has an administator password on it because I don't want anyone accessing that information, but the windows OS does not. If someone boots up in the windows OS, will they be able to "backdoor" past the admin password in to the mac OS?
thanks,
chris

It's not "bad guys" that have access, it's just very sensitive information and the computer has been temporarily moved to a slightly less secure location (ie: not in a locked office) I tested it out today and it seems that as I suspected the password keeps the Mac OS intact because when it exits windows, it reboots into macOS.
thanks though.

Some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file mana

some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file manager, but it still is not in the music library in play music.

Cyndi6858, help is here! We'd be happy to help figure this out. Just to be sure though, the Droid Maxx should not have an SD card. Is this the Droid Razr Maxx? How did you add the music to the device? Are you able to see the files and folders located on the SD card or device when plugged in?
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

NEF Files Do Not Show up in Lightroom.

Hello,
I bought a new Nikon D750 yesterday and my raw files do not show up in Adobe Lightroom. The do show up in Photoshop and Bridge. I have creative cloud and it says it is "up to date" Does anyone know how I can get Lightroom to open the files? Thanks. Father Hungry.

Install Lightroom CC 2015 via your Adobe Creative Cloud app.

I have an iPod Touch but I currently don't have a PC. I found an app that would allow me to connect to my network drive and I was able to transfer music files to it. These files do not show under the Music app and I can't find any way to do it.

I need help from some Apple people. I have an iPod Touch and I wanted to load it up with some fresh music but I currently don't have a PC. I found an app that would allow me to connect to my 2TB network drive directly and I was able to transfer a bunch of music files to the iPod. Unfortunately, these new files do not show under the Music app and I can't seem to find any way to convince the iPod that they are music. I can play them through the file manager only. Android doesn't have this problem, any music I put on my phone is recognized as music and can be played through any of the music apps. Am I missing something or is Apple to inflexible to handle this?

You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.

My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved before. It can be charged also.

My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved earlier. It can be charged also with the USB cable.
I have updated my itunes. Reinstalled the same but still ipod is not showing in mac as well as in itunes.
I have tried to reset the ipod but still the results are same. Please help me..

I have exactly the same problem as vinitpanse - does anyone have an answer?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

HP C6380 photosmart all in one wireless does not show in mac printers

I have a new MacBook Pro and an "old" HP C6380 photosmart printer/scanner. It is connected to my wireless network but does not show on Mac to choose to add as a printer. What can I do? I do not want to buy a new printer!

Never mind. It just won't work wirelessly. I connected to router with cable & it works OK.

Boot camp files do not show in Mac following Windows restore

Similar Messages

Maybe you are looking for