Boot Camp Install Issue

I have a 27 inch Imac using OSX Lion 10.7.3 and I would like to install Bootcamp so I can load Windows 7. When I try to use Bootcamp Assistant I get the following message, "The startup disk cannot be partitioned or restored to a single partition." I've gleaned from the forums that I'm going to have to reinitialize the hard drive and reinstall Lion so I can properly use Bootcamp.
Once I reinitialize the drive and reinstall Lion, should I use Bootcamp to create the partition before I restore my Time Machine backup, or should I wait to use Bootcamp until after I've restored my backup? I'm worried that if I wait until after the restore that it would just take me back to "The startup disk cannot be partitioned or restored to a single partition." again. But I'm also worried that if I use Bootcamp before the restore that restoring everything will overwrite the partition, Windows install, etc.
I hope this makes sense. Any help would be appreciated.

The disk was from my other PC system, however it is an OEM upgrade disc. Maybe that is the problem but if that is the case why did it work when I installed it through VMware and it worked fine? The disc can be used as a self full install of windows 7. I have also it on another PC with no issues. Trying to convert to Mac finally but this is causing a hiccup.
The next question then is do I really need to go the boot camp way? I only need it to run quickbooks (need windows version for reasons) and a couple of other programs but thought it may run better as a boot camp install rather than VM plus I couldn't figure out how to reduce the size of the partition that VM installs, it takes too much space from me for no reason (60Gb).
Thanks for any input.

Similar Messages

New Macbook Pro retina boot camp install issue - Windows 7

Trying to complete a boot camp install but can't get past creating a partition. I am able to download the windows drivers through boot camp, it burns them to a DVD, verifies the DVD (couldn't use CD-R as it kept saying burn failure after verifying files) and then takes me to the make a partition page. When i click install the partition, it pops up saying "can't find the installer disc" and wants me to put one in the super drive. What gives? I have that disc in the drive, also tried the Windows 7 disc and got the same error. So basically I can't create a partition to install windows 7 that I have.
Any thoughts?

The disk was from my other PC system, however it is an OEM upgrade disc. Maybe that is the problem but if that is the case why did it work when I installed it through VMware and it worked fine? The disc can be used as a self full install of windows 7. I have also it on another PC with no issues. Trying to convert to Mac finally but this is causing a hiccup.
The next question then is do I really need to go the boot camp way? I only need it to run quickbooks (need windows version for reasons) and a couple of other programs but thought it may run better as a boot camp install rather than VM plus I couldn't figure out how to reduce the size of the partition that VM installs, it takes too much space from me for no reason (60Gb).
Thanks for any input.

Boot camp install would error out

I had multiple issues as well.
When I first tried to install 8.1 full as a fresh boot camp install it would error out and say that the required files were not there to install.
Then I would try it again and it would then get close to finishing and say it cant change the boot order and fail.
Apple please fix as soon as possible.
<Re-Titled By Host>

What's happening here is that the Windows installation, for whatever reason, is not booting properly. It is also set as your default boot system. To change this, reboot your mac while holding down the Option/Alt key. After awhile you will be presented with two icons, one for OS X and the other for Windows. Select OS X and then press Enter.
OS X will boot. Go to System Preferences >> Startup Disk and then select your OS X partition and this won't happen anymore.

Failed boot camp install - how to remove windows partition?

Hi There,
After a failed boot camp install, boot camp no longer sees (or can remove) a windows partition - Disk Utility can't seem to remove it and if I use:
$ diskutil list
It shows up as partition 5 "Microsoft Reserved"
I also have a portion of free space that I can't seem to incorporate back into the main OSX partition - how do I remove the windows partition and make the drive a single OSX drive again?
Any help would be much appreciated
Cheers
Ben
- New Mac Pro
- Installing onto internal 1 TB SSD
- 10.9.3
- Windows 8.1

Just incase others have this issue, this wasn't caused by using Disk Utility (Disk Utility couldn't remove the partition anyway) it was caused by repeatedly trying to format the Boot Camp partition using the Windows installer when Windows refused to install.
The solution is an Apple tech note (I can no longer find it sorry) that sates that no other hard drives besides the internal HD and the Windows USB flash drive can be connected while installing windows.
Cheers

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

Yosemite boot camp install on /separate/ drive?

i have an existing windows 7 boot camp install that resides on a drive in my 2006 mac pro with my LION OS.
i now have a 2012 mac pro.
should i install windows 7 with boot camp on a SEPARATE drive or can i put it on a partition on the same drive as yosemite?
thanks

OK. thank you.
so i /like/ the idea of having an internal CLONE of my OS in bay 1 on the drive in bay 2.
in the past i have set this to happen nightly and i use WinClone (thanks hatter) to create a BACKUP of the Boot Camp install of Windows 7 and i drop this backup on the DESKTOP. this way i have a BACKUP of Windows on my boot OS and i also have one on the CLONE.
just to confirm - no reason as far as you are concerned to change this?

Should my boot camp install see my OSX drives?

HI folks. I"m trying to run Windows 7 under boot camp and thought that a Windows boot camp install could see my mac partitions so I could access the same data when I boot to my mac or my windows 7 boot camp partition. They are formatted OSX Extended Journaled. Should I be able to see them? Thanks.

Windows 7 uses a NTFS formatted file system. OSx uses a Mac only file system, so the answer is you can't without third party tools. Search these forums or search Google. Your question has been asked and answered in these forums several times. The search button is in the upper right of this page.
If you install Windows using a VM like Parallels or Fusion it is a little easier to share files between Windows and OSx.

Apple Store Refuses to Diagnose Hardware Issue after Boot Camp Installed

I previously reported an issue in the Boot Camp Beta forum, but figured I share this with other MBP users as well. After loading the updated firmware, running boot camp to partion my drive, I installed Windows XP Professional. During the install, the screen would go dark, and come back at irregular intervals, as if there was a video sync problem of something. I managed to get XP installed, and booted it and loaded the updated drives from the Boot Camp driver CD which I had earlier created. Subsequent attempt to use the XP installation result in a constantly blank screen, with only occational glitches, as if there is some activity coming out of the GPU, but it's not working correctly.
This is what led me to take my machine to my local (15 miles away) Apple Retail Store (Washington Sqaure, Tigard, Oregon), and attempt to show the problem to a "genius". HOWEVER... As soon as I mentioned "Boot Camp" and XP, they went into the whole "public beta, blah, blah, blah", "not supported", etc. I tried to explain that I was not reporting a SOFTWARE issue with Boot Camp, but rather a HARDWARE ISSUE which is exposed on my machine only after using BOOT CAMP to partition the hard drive, and then installing Windows XP. All I get was "Well, it works fine in OSX, and Boot Camp is Public Beta, so there's nothing we're going to do". Obviously, I'm livid. And, will pursuing any and all avenues to bring this problem to Apple Management attention. First it was Mark Pienpakdee the "genius" who tried to help me, and then I was further rebuked by Mark Macsurak, Assistant Manager. So, I'm left with broken hardware which won't work correctly running Windows, and no recourse until Boot Camp isn't "Public Beta". What a load of crap. I was so mad, I didn't even bother buying the extra AC adapter I was planning on picking up. ARGHHHHHHHHHHH!!!!!!!!!!!!!!!
I was absolutly shocked that the "genius" didn't react with anything like "wow, what an interesting problem, let's see if we can diagnose it". He didn't even want to see me boot XP to show the problem, only wanted to see that OSX was working normally and send me on my way.
If you have had similar problem at the Washington Square store in Oregon, be sure to let them know by sending e-mail to [email protected], I know I will...
Eric

If you are going to send an e-mail you should send it to [email protected] However, nobody from Apple is going to send you a response. The Software is Beta which means it is not ready for Prime Time (Also that means that the drivers are beta too). Plus they say before you decide to install any of this in their write ups that they do not and will not provide any support for BootCamp and/or Windows. So they are right not to do anything if the computer works like it is supposed to under OS 10.4.6. Now they might take a look at somethings when OS 10.5 comes out if it has BootCamp in it. They may have something similiar in it, or it might be a perfected BootCamp. However, I doubt that they will ever provide any support for Windows. There has been some talk that Microsoft is looking into supporting Windows on the MAC. However, as far as I have heard no decision on that has come out as of yet.

Installing Boot Camp- space issue

I'm trying to install Boot Camp/Windows on a MacBook Air running Snow Leopard. I have 23.4GB of free space, but an error message comes up saying that I need at least 10 GB of space to proceed. What's happening?

Hi arcticbelle,
Boot Camp needs a minimum of 10GB of contiguous free space in order to install. Disk Utility will show two different "free" readings, depending on where you look. The larger figure, which the Finder and other things will use, is the total free space available. The second is the amount of free space available for a new partition. It's shown when you select the top line for the drive, click the Partition tab, then select a partition, the "Available" amount may be smaller.
This is because partitions, unlike folders, must occupy contiguous space on a disk. The data on your OSX partition is scattered over it, not all nicely packed together. That's normal, as you add, update, and delete files, not every nook and cranny is used again immediately.
You could back up your drive (on two different HDs, to be safe), reformat it to 2 parttions, then restore the backup. But it's going to be very tight, and you'll likely have performance problems because of it.
Try to delete anything you don't need, and/or offload stuff you don't use often and delete it.

IMac 27" Target DIsplay Mode + Answer to Windows 7 Boot Camp Install

First, I'd like to address the handful of complaints I've come across about installing Windows 7 via Boot Camp on the new 27"iMac.
The issue of the screen going blank when almost done has an easy albeit annoying answer. Simply connect the iMac to an external display, I used a small vga lcd with the Mini DisplayPort to VGA adapter. When the iMac's screen goes black the external lcd will continue, and when Windows 7 starts up it will download the updated ATI drivers. From there alls well.
Second, my problem.
Target Display Mode is a great feature. It worked great when I first used it, and it works great now except for the fact that the Command+F2 button combination stopped working. I have to manually unplug my MacBook Pro in order to get my iMac's original screen up. At first Command+F2 would allow me to switch back and forth, and now it does nothing.
Any suggestions?

Well, the usual first things to try for a display-related issue are
Reset PRAM
http://support.apple.com/kb/HT1379
and of that does not help, reset SMC
http://support.apple.com/kb/HT1543
which is basically unplugging the iMac from power and reconnecting it following the precise procedure.
Note: After resetting PRAM, you should go to System Preferences +Startup Disk+ pane to make sure your internal drive is selected (highlighted) as the startup disk.

Slow restart - blue screen BSOD and Boot Camp restart issue

After Snow Leopard install on Macbook Pro I have experienced a very slow startup and restart. The grey apple screen appears for about 25 secs and then the blue screen hangs for 2mins and 2 secs. Also when restarting from Boot Camp blue screen just stays and restart fails. I waited approx 25 mins and blue screen was still there. I have searched Console system log for clues but am not technically adept. hopefully someone can help. I have copied log below form recent restart (in OSX mode, not boot camp). My Windows Boot camp volume is called ERICGLPC and I can see some issue on the log but unsure what it means.
Aug 29 23:56:02 eric-lawrences-MBP-2 loginwindow[55]: DEAD_PROCESS: 55 console
Aug 29 23:56:03 eric-lawrences-MBP-2 com.apple.kextd[10]: Error reconsidering volume /Volumes/ERICGLPC.
Aug 29 23:56:03 eric-lawrences-MBP-2 shutdown[265]: reboot by ericgl:
Aug 29 23:56:03 eric-lawrences-MBP-2 shutdown[265]: SHUTDOWN_TIME: 1251554163 308941
Aug 29 23:56:03 eric-lawrences-MBP-2 mDNSResponder[19]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) stopping
Aug 29 23:56:03 eric-lawrences-MBP-2 mDNSResponder[19]: mDNSRegisterinternal: Shutting down, can't register 20 Eric\032Lawrence’s\032MBP.device-info.tcp.local. TXT model=MacBookPro2,2
Aug 29 23:56:03 eric-lawrences-MBP-2 WindowServer[75]: hidd died. Reestablishing connection.
Aug 29 23:56:03 eric-lawrences-MBP-2 DirectoryService[11]: dnssd_clientstub read_all(20) failed 0/28 0
Aug 29 23:56:03 eric-lawrences-MBP-2 DirectoryService[11]: dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x10061cc00 FFFFFFFF DDDDDDDD
Aug 29 23:56:03 eric-lawrences-MBP-2 WindowServer[75]: bootstraplookip failed: Unknown service name
Aug 29 23:56:03 eric-lawrences-MBP-2 DirectoryService[11]: dnssd_clientstub read_all(19) failed 0/4 0
Aug 29 23:56:03 eric-lawrences-MBP-2 sudo[269]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Aug 29 23:56:19 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Aug 29 23:56:26 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Aug 29 23:56:27 localhost pcscd[27]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Aug 29 23:56:28: --- last message repeated 1 time ---
Aug 29 23:56:28 localhost configd[15]: network configuration changed.
Aug 29 23:56:28 eric-lawrences-MBP-2 configd[15]: setting hostname to "eric-lawrences-MBP-2.local"
Aug 29 23:56:30 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Aug 29 23:56:43: --- last message repeated 1 time ---
Aug 29 23:56:43 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[55]: Login Window Application Started
Aug 29 23:56:44 eric-lawrences-MBP-2 bootlog[65]: BOOT_TIME: 1251554179 0
Aug 29 23:56:44 eric-lawrences-MBP-2 blued[66]: Apple Bluetooth daemon started
Aug 29 23:56:44 eric-lawrences-MBP-2 fseventsd[59]: checkvol_last_modtime:XXX failed to get mount time (25; &mount_time == 0x1000b5358)
Aug 29 23:56:44 eric-lawrences-MBP-2 fseventsd[59]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 640F51B0-A701-4DF7-84CD-9DE7DA23AD26
Aug 29 23:56:44 eric-lawrences-MBP-2 sudo[84]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Aug 29 23:56:45 eric-lawrences-MBP-2 com.apple.usbmuxd[49]: usbmuxd-167.1 built for iTunesEightTwo on Jul 9 2009 at 14:02:00, running 32 bit
Aug 29 23:56:48 eric-lawrences-MBP-2 mDNSResponder[18]: SIGHUP: Purge cache
Aug 29 23:56:51 eric-lawrences-MBP-2 loginwindow[55]: Login Window Started Security Agent
Aug 29 23:56:52 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Aug 29 23:57:07 eric-lawrences-MBP-2 ntpd[43]: time reset +0.640880 s
Aug 29 23:58:46 eric-lawrences-MBP-2 loginwindow[55]: Login Window - Returned from Security Agent
Aug 29 23:58:46 eric-lawrences-MBP-2 loginwindow[55]: USER_PROCESS: 55 console
Aug 29 23:58:46 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[120] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Aug 29 23:58:57 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[120] (com.apple.Kerberos.renew.plist[138]): Exited with exit code: 1
Aug 29 23:59:00 eric-lawrences-MBP-2 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[131]: ATSFindFolder timeout. (domain:-32764, dirType:'font', createFolder:false, ATSServer pid:131)
Aug 29 23:59:01 eric-lawrences-MBP-2 ServerScanner[135]: Not scanning because node /Active Directory/All Domains is in searchPath
Look forward to hearing from anyone.
Many thanks
Eric

JoePrairies wrote:
if anyone could perhaps shed some light on why this might have occurred?
Your Mac may have if you didn't erase the log files
Without that, it could have been anything.
-mj

Leopard partition will not boot with Boot Camp installed

I am running Leopard 10.5.2 with Boot Camp running Windows XP on about 150 computers in multiple computer labs on my campus. My problem is that a few machines every couple of weeks will stop booting into the Leopard partition. The problematic computers will however boot into Windows every time. Is there an update or something that is causing the Leopard partition to stop booting? I run disk repair and I get "invalid node structure" which causes the repair to fail. My only solution is to partition the drive then re-image the Mac side and Windows side. This unfortunately is not happening to the same computers each time, I fix one computer, then a different has the problem and so on.
Does anyone have an suggestions? By the way, I am running Bombich's BootPicker v. 2.0. Could this be causing the issue?

This helped with a previous Windows issue but when I boot the system while holding "option" key, the Leopard partition does not show up. The Leopard partition shows grey out when I boot from an install DVD and I can not repair permissions or repair disk.

Boot Camp 2 issues: repartioning; DVD-drive; screen; sound; usb-power

I found various problems in version 2 of Boot Camp (included in Leopard).
1.
After removing the Boot Camp 2 Windows partition, it is impossible to recreate a new Windows partition. Somehow the windows partition is not completely removed (?) and the Boot Camp Assistent goes on forever restoring the Macintosh HD to its original (one partition) state. Strangely, you can just quit the assistant during this process without consequences. Only repartitioning the complete HD using Disk Utility resolves this (this of course requires a complete reinstallation of OS X).
2.
After installation of Windows XP Pro, Windows treats the DVD-drive (OPTIARC DVD RW AD5630-A) as a removable media, just like a USB-memory. This means that you can remove the DVD hardware from the system(using the tray icon "Safe Removal hardware") by just one click. The DVD drive then completely disappears from 'My Computer' even with a CD in! The only way to get the DVD-drive back is by restarting Windows (inserting a disk can be done but it is impossible to access the disk; ejecting the disc is also impossible (the eject key on the mac keyboard doesn't work).
3.
I suspect that there is something wrong with the video driver in windows. This can be noted for instance with the black "moon crater" as the desktop image (lower left corner) or in the windows login-screen (lower blue part of the screen). The issue may be described as pixels varying in brightness and colour in a fast way. Pixels are not "constant" and it seems like a wave is moving over these parts of the screen. It seems more or less comparable to the problems reported with Boot Camp beta 1.4 on MPB's.
4.
I also suspect the windows sound driver (RealTek) not to be ok. Every Windows sound (startup Chime, warning, etc.) is followed by a strange electronic sound, as if the sound is echoing while fading away. I did not try to play an audio CD, but I think this may result in a not so pleasant experience.
5.
When I connect my 2 GB Kingston USB-memory to the internal hub of the new apple keyboard, Windows starts complaining that there is not sufficient power. The same configuration works without problems under Mac OS X.
Has anyone similar experiences? To me it seems like Boot Camp is still in beta stage....

I also encountered problems 4 and 5:
*To no. 4: Distorted sound and background noise:*
It's exactly the same as described by HLO-HL. As soon as the soundcard gets turned on in Vista (by any program i.e. iTunes, Mediaplayer) there is this background noise. Watching a DVD is almost impossible. Listening to music in iTunes is somewhat ok, but only at high volume (so the background noise cannot be heard) and it is still distorted sometimes.
I tried about everything from installing the latetest Realtek driver, updating the Intel chipset drivers, to changing the bitrates and so on. Still no resolution found. It seems the many others experience the same problem (search for 'distorted sound Vista').
*To no. 5: Low USB power reported*
I got this message with every device I connected (no matter if it was a 2.5''-harddrive, a cardreader, a camera or just a simple memory stick ...

Help With boot camp installing on Mac Pro with a ATi Radeon x1900 card

I go throw the boot camp setup with setting my drive and burning the cd drives from mac os... So when I re start the computer and start installing.. My video card is not working... The screen is all chopped and bars running every were, so I can see what Im doing to install vista ... So how do I change this is their some upgrade with the video card and how do I do that
Im using this setup
I have a mac pro 3.0 8 core
ati radeon x1600
using boot camp 1.3
have vista untilamte
Thank You

I don't use Bootcamp/Parallels/Windows but I saw in the Bootcamp forums that someone solved this issue by going to the ATI site and downloading and installing the X1900 drivers for Windows (http://ati.amd.com/support/driver.html). They had to do this while in Windows (which was difficult) do to the garbled screen but managed to suceed. Not sure why they didn't download the trial version of Parallels and do the same thing with an ungarbled screen.

Boot Camp Partition issue (still on OS X 10.4.8)

Hi all,
I'm trying to get Windows 7 up and running on my 2 year old MacBook Pro. Just bought the full version of Home Premium, as I've never installed any Windows on my mac before. Also, I haven't gotten Snow Leopard yet, so I'm still on OS X 10.5.8, which I think means a slightly older Boot Camp.
So I go in to Boot Camp Assistant and try to partition my 50 free gigs into about 20 for windows and 30 for mac. Trying several times, it always comes up with the error "The disk cannot be partitioned because some files cannot be moved" and says I should back up my disk, make sure it is formatted as OS Extended (Journaled), and restore the disk from the backup. This is the part I don't know how to do exactly. Is it saying I have to basically wipe my HD and restore it from my external HD? Under restore in the Disk Utility I can drag my external drive into the "source" box, but can't put my mac HD in the "destination" box.
So, anyone have any tips on how to move forward with the partitioning? Is it merely a space issue like I think, or is it a larger problem having to do with not being on Snow Leopard yet? I appreciate any advice or suggestions, I'm sick of spending so long trying to figure this out, haha.
Thanks!

I wish Apple would expand their own tutorial. The Boot Camp pdf; the FAQ; but it can be done with your OS X DVD and Apple Disk Utility's Restore; with other programs that are free, but require (essential to my thinking) that you have another drive or partition that you can boot from.
Windows and you have rescue CDs. With a Mac you can have and boot OS X from multiple hard drives.
Install OS X to drive #2 and use that to erase and restore.
TimeMachine is 'okay' but you can't boot from it. And I've got to say a bootable backup is more important tool.
The two most popular are Carbon Copy Cloner
http://www.bombich.com or from http://www.macupdate.com
SuperDuper from Shirt-Pocket Software, free for full copy, $29 for smart update of backup. Great PDF and of course no one looks to use the Help menu in programs (like Disk Utility even).
Those backups can be important and handy to have before installing any Mac OS update.
And there should be some 'Stickies' or "Most Popular Threads" or something because this question has been at some times a daily topic.

Boot Camp Install Issue

Similar Messages

Maybe you are looking for