Boot Camp Installation freezing at Boot Manager screen....

O.k.... so this is a weird one......
I have a iMac 6,1, and I, for the most part, have had Boot Camp installed on it since Leopard first came out. Recently though, I reinstalled XP cause Windows 7 was causing a bunch of problems for the games I play.
So anyways, something happened, and my XP partition wouldn't load up from the Boot Manager.. so thinking there must have been something wrong with the partition, I deleted it and used Boot Camp anager to make a new one. When I run Boot Camp Manager, it makes the partition fine, but when it restarts to start installing, its gets stuck on the grey screen. If I try restarting and run the Windows disc from Boot Manager, it gets stuck on the icons, and doesn't move any further.
So... I formatted the drive, and reinstalled OS X Snow Leopard thinking that would work, and no, it is doing the exact same thing, so I now thinking it has to be a firmware, EFI, SMC problem... except there is no way to reset or reinstall the firmware if it already up to date. I have reset P-Ram, reset the SMC (even though apparently, this won't do much)
The thing that is puzzling, is that it has worked fine in the past, and funny that it would all of a sudden refuse to run the Windows Installation Disc..... I have a XP, Vista, and Windows 7 official copies, and none of them work and do the exact same thing.
I am hoping that this problem is something very simple.
JD

I believe I have exactly the same problem.
I try and boot from an install dvd and I get the gray screen with the apple and the forbidden logo...
Tried resetting the P-ram, nothing, merge and partition the drive again, nothing... I even installed rEFIt after all this to try and circumvent the default boot program, nothing... only the forbidden sign...
I can only truly boot into Mac OS X by selecting ALT during startup, or by having it blessed as the bootable partition.
Message was edited by: PrinceEdu

Similar Messages

Help, Windows Boot Camp Installer Freezes Befor Finshing Installation

MacBook Pro 2.6 4g Ram 200Gg hd, 17hd 10.5 Leopard
Gave windows 25g
Installed Windows XP Home SP2 no problem,
Windows runs
Installing Boot Camp for Windows - Freezes on The Atheros wireless install - Hard Freeze - (left it for 30 min So far.) Mouse is frozen, keyboard dose not work.

Justin:
How about we try this:
1. Hard Wire the internet connection to your Macbook Pro via the ethernet port
2. This should allow you to connect to the internet
3. Open Internet Explorer
4. Choose Tools from the menu of the Internet Explorer and then click on Windows Update
5. This should open a separate window from which you can choose update and at that point windows update should get the drivers for Atheros and list them as Optional Update. Install those drivers.
I am not sure if you can even get this far but is worth a shot.
Axel F.

Installer freezes during boot with ATI Radeon card

System: Toshiba Satellite A305-S6916
Video card: ATI Radeon Mobility HD 3650
Installer: 2010.05 amd64 netinstall
Problem: Installer freezes during boot at "setting console to utf-8 mode".
Solution: Add "radeon.modeset=0" to kernel command line.
Posting for the sake of anyone else who might be having this same problem.

Same here:
System: Dell Inspiron 1525
Video card: Intel GMA X3100
Installer: 2010.05 i686
Problem: screen turn black during system load.
Solution: Add "nomodeset" or "i915.modeset0" to kernel command line.

Boot Camp Keeps freezing!!!!

Ok so for the past week I have been trying to install Windows 7 Ultimate on my 13" Macbook Pro (mid 2010). Obviously I am using Boot camp to do so. The process always begins smoothly, but whenever the installation gets to the "Completing the Installation" step it freezes and I have to force restart my computer. I have tried countless times with both Ultimate and Home Premium, both copies are authentic. I am getting extremely frustrated and any advice at all would be fantasitc!! thanks!

You posted in the Macbook Pro forum. Try asking in the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Boot Camp Installation: Definition of, and insights into "External Drives"?

I'm recovering from a logic board failure. One casualty was that I lost my prior Boot Camp installation of Windows on my main internal hard drive. :-( Wondering if I can install Windows anywhere other than the main internal hard drive so I can maximize space on my OSX main internal drive?
From what I've gathered, installing Windows 7 Boot Camp is very difficult (and perhaps impossible?) on an external hard drive. However, what's not entirely clear is what constitutes an "external drive".
Questions:
1. Can I install a bootable installation of Windows 7 using Boot Camp (obviously not running OSX in this scenario) on either the:
A) Data Doubler 7,200 drive
or
B) Express Card 34 SSD drive
2. Can I also install Parallels (on the main internal OSX drive), then while in OSX launch (a much slower) Windows from location A or B?
Context:
1. On a late 2011 MBP 17' (version 8,3), I've replaced the stock hard drive (7,200 rpm) with a much faster OWC SSD Drive. (Awesome upgrade, btw!)
2. The internal apple dvd device was removed and the stock hard drive was inserted in this location using OWC Data Doubler. (Also, very nice.) An extra challenge here is that the dvd drive is now an external device. I have a Windows 7 install disc, but I'm not sure if it will be recognized during the installation process?
3. This model MBP has an ExpressCard 34 slot, for which I can buy an SSD drive. Never used this slot and have read mixed reports on boot ability.
Any and all insights greatly appreciated!

Yoüf wrote:
Many thanks for the helpful response, Loner T. I think I've got it. To install Windows through BCA on the Optibay drive, I temporarily move it to the main SATA bay. I can then temporarily put the DVD drive back in the Optibay. So here's a question: In doing this, I would no longer have an OSX boot drive (since I'm temporarily removing my OSX boot SSD). It's been a while since I used BCA, so my memory is fuzzy (sorry), but does the BCA process need a working OSX install on the drive in the SATA bay?
The SSD with OSX boot is normally (for your specific scenario) kept in an external enclosure (USB/FW/TB) to boot from and run BC and partition the disk in the main SATA bay.
You mention that modifying the BC info.plist causes issues. I lost you a little here. Using the method you describe (move the Optibay drive to the SATA location, run BCA to install Windows, then move the drive back to the Optibay location), does the BC info.plist need to be modified or not? If yes, a few more details would be welcomed. If not, what prompted this thought?
If you have a functional Optical drive and the designated Windows-to-be in the proper bays, the BC info.plist modifications are unnecessary, and can cause other grief, and are best avoided.
Thanks also for the bleeptobleep post. It says to use a USB3/Thunderbolt external drive (which I do have); however, my MBP (version 8,3) only has USB2 ports. I realize that a USB2 port will read a USB3 external drive, but was wondering if this limitation is a deal breaker for a bootable Windows system, or if it just means that things will be really, really, tragically slow due to low transfer rates. Any idea on this aspect?
USB3 can cause problems for Windows 7 installer, bot not as many issues for Windows 8+. It is better to stick to USB2, but you are correct it will be slow. OSX can boot and will use RAM much more aggressively, unless it has to go back to the USB (2/3) when things may give you a beach ball. Windows 7/8 are less friendly for caching the whole OS and applications in RAM, and may be slower. A TB connection is much faster (TB2 even better).
BTW: Bummer that the ExpressCard slot can't work for booting into Windows. That would be pretty slick. I've seen some older posts by folks who were once able to do this, but seemingly only with early versions of OSX. Apparently newer OSX versions either did away with this feature, or seriously complicated the process. Would love to find a workaround if one exists.
You can test it, but may have some issues finding storage for ECards.
(Dumb question: on this forum, how are you threading comments into a quoted block of text? Are you using HTML or is there some easier way?)(((
Under the "Reply" bar at the top, there is an icon with a "quote" and a "speech" bubble, which is used to quote posts. You can either quote from a previous post, or select a line (or more) of text and click on that icon.

Help evaluating complex boot camp installation

I need to do a bit tricky boot camp installation, and would appreciate if somebody could evaluate before hands whether the plan outlined below should work, or if i should try some different approach:
Current setup is Tiger with two OS X partitions (16gb root, rest mounted under /Users)
Desired setup is Tiger with two OS X partitions, AND a Windows Vista partition.
Plan is:
- Make disk image of the current (Tiger) root partition, and backup of /Users
- Boot from install DVD, re-partition the internal disk to single partition, restore the disk image to the single partition
- Upgrade to Leopard
- Install Boot Camp and Windows Vista
- Use 'diskutility resizeVolume' to split the Leopard partition to two
- Overwrite the first partition with the original Tiger disk image
- Restore Data to the second partition
How about? Will Boot Camp continue to operate when i overwrite Leopard system with the Tiger disk image, and when i split the single partition to two pieces? Or is there some other recommended way for doing this?
Thanks,
Henri Karapuu

'diskutility resizeVolume' should had naturally been 'disktool'. Also sorry about the layout, for some reason single dashes in front of each line got eaten.

Boot camp often fails to boot - fix?

Boot Camp often fails to boot at all, leaving the iMac dead at the bootloader screen. Have to force shutdown by holding down power button. Full hardware test declared the hardware 100% functional. Disk Utility and chkdsk sees nothing but fire. This is intermitent/random and it proved impossible to "force" it's occurance. It happen when it darn well please?
First occurance goes back to late July 2011, a few days after a major thunder storm that caused pulsing power blackouts (as in, very short bursts - like turning off the power then immediately flipping it back on - too quick to actually shut the computer down). Surely, this must be the source of the issue? Right? Alas it doesn't adds up. Power supply of this house is very stable and reliable. Power fluctuations are unhearded of. It's also connected to a surge protected outlet. The system itself, in Mac or Win, is flat out stable. It does not freeze out of the blue like what a damaged power supply would cause. It only ever freeze upon choosing a partition via the boot camp interface.
Further observation as compared to normal boot procedure: Upon selection of the Windows partition, the LED on the USB mouse turns off then back on again a short moment later. Windows loads up normally. When the crash occurs, the LED never turn back on. It's just dead right there and then.
What's going on and what can I do to fix this? It feels like some hardware initialisation fails for some reasons. It's ough to be around the USB systems itself but what do I know anyway?
P.S.: Please, don't mention the dreaded format and re-install. It's a 20 hours job. I'm not going there. ty
Message was edited by: Virgule - changed a "foul" word

Why not upgrade the surge protector to a UPS? good units are very affordable.
Put all your sensitive equipment like modem/router, computer, electronics running off UPS.
CyberPower SINE 1000VA/600W $137
http://www.amazon.com/CyberPower-CP1000PFCLCD-1000VA-600W-Compatible/dp/B00429N1 92/
Well, sometimes if you don't have backups, and refuse to do what you may need to....
There are troubleshoolting tips and faqs I'm sure on the 'net.
Starting with Windows 7 DVD for one
Even OS X won't survive with forced (hard) shutdowns.
If it only happens in Windows, and you were running OS X when the outage occurred...
USB devices and cables can be hard to ID but swapping cables and stuff helps.
As for Disk Utility, it does not look at drive sectors or files for issues.
If you really want to scan a hard drive, use the vendor's own Linux or Windows utiilty to recertify the sectors.
If you haven't done any deep cleaning of files, registry, even uninstall and reinstall components.
I just did a reinstall. Partially to be a test run for when I have to install Windows 8 next week, also to clear up a problem I had, possibly a rogue web site using a rootkit to hide files and icons and programs disappeared and icons became generic. So yes I don't take it lightly, but the new install runs much much better (over two years since last install).
AHT is not a 100% reliable at finding everything, only what it actually is designed or suppose to look for.
A semi-loose DIMM or faulty can be enough, and not likely AHT or Memtest will find it, but Windows does tend to spot a problem with RAM during installs.
CCleaner 3.x
Driver Sweeper 3.x
START: run %TEMP% - Select All and send to Recycle
Lion Recovery - show all hidden partitions and check health of all, hidden debug menu in Disk Utility can be enabled in command line
Some partitions (GPT, EFI, System, Volume Information Block) are only tested during format where each sector does get a thorough check for errors because they can't be mapped out later. When you do chkdsk etc you only test user partition areas and not the 'entire' drive, unless doing a full initialization. And GPT requires that the VIB and also the backup VIB both be error free - in the past the backup VIB if it failed was "optional" though, it is not now.
If you clone OS X then it is easy to move it to another drive and also to do full initialization and restore. If 3 days of your time isn't an option maybe time to invest in program(s) and methods that can backup and restore.
Trying to find the needle in haystack that you have limped along with I guess since July (since installing Lion? maybe ?) can take 3 days probably, unless you are lucky enough to replace a mouse or cable on first step and it all goes away (hit the lottery or get hit by lightning odds)

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

Vista Blue Screen after Successful Boot Camp installation (32 and 64 bit)

OK so there are a number of people with issues relating to the BSoD after a successful (or not) implemetation of Bot Camp and Windows XP and/or Vista. One of the identified problems relates to the NVIDIA GEforce 9600m GT display driver which crashes out AFTER windows performs its update routine.
Having removed and installed the partition (to ensure a clean install each time), the inescapable conclusion is that the NVIDIA driver is to blame for the crash dump, but it is one of the many MS updates that is the root cause of the failure. If you do a clean install of Vista 32 or 64 Ultimate and install the Boot Camp 2.1 (build 1256) and DO NOT allow updates, the system is not only stable, it runs like a train!
I have Contacted AppleCare about this (as my new MBP is only a few days old) and they have not even heard of the problems. NVIDIA have obviously got issues with something as the driver has been updated to a BETA on their web site, but this will not work on a Mac as it cannot seem to find the hardware to allow the update to complete.
If (like me) you have bought an MBP for support issues for both Mac and Windows users, this is a showstopper and one that is about to cause me to ask for my money back. So far, the nice shiny and new MBP is back in its box pending a 140 mile trip back to Exeter from whence it came.
SHARK!

Boot Camp was a response to public challenges at the time to see who could find how to install Windows on a Mac - which is totally okay thing.
Then you want Apple to do more than any normal PC vendor selling a laptop where people have to do things like deal with BIOS, drivers and all the things you have had to deal with, for Windows.
I'm not disagreeing, let alone arguing, I agree that hardware abstraction layer type stuff Apple would need to do. But I don't think Apple needs to do more than get Windows installed. Drivers, AV, and all the stuff that comes with Windows doesn't change. But it should not BSOD when you install something you are told you need.
I wouldn't be surprised though to see Windows 7 eventually support Apple hardware out of the box so to speak.
Cookie cutter answers are part of today's customer experience "level one" is no level at all, but a lot of times - and it takes a lot of work - to translate feedback and problems into "cook book" before you get to the troubleshooting (level 2 and above).
Which is why I read sites like MacIntouch; subscribe to MacFixit (tons of articles on a CD along with shareware). And books.
Nvidia has terrible drivers in OS X on the Mac Pro (workstation) while ATI has had very good drivers and OpenGL support.
I prefer to have more choice and freedom when it comes to drivers. As for engineering and how things get qualified (use to see even SCSI hard drives had to be qualified for both the OS; the controller to be used; driver version; firmware; etc).
What I see is the first shipped BIOS/EFI firmware on any device or system is not the one you want.
Back in the 70's I was introduced to "bleeding edge" but we would get premiere on-site support if we were willing to install, adopt, some new IBM service, software/hardware. And sometimes we were there on Sunday on holiday weekends.
One person just could NOT after doing everything under the sun, get Adobe CS4 to install on their new $5000 Mac Pro 2009. Got a new system, worked perfectly.
In 2008 Early Mac Pro, most all systems would freeze on wake from sleep. Took two months before an EFI update was issued that cured the problem. There is/was also a problem with "inrush current" and PSU.
I had Blue Screen with Vista. Repeatedly.
At first I thought it was a new MICROSOFT 4000 keyboard.
Later I wondered if it was my Apple OEM Nvida 7300GT (and some are failing but it worked in OS X) so I bought 2nd, a PC 8600GTS.
And pull 3rd party PCI Express controllers (FW800, SATA 1x, SATA 8x cards).
Came away and thought "oh, it was the 3rd party card" when that seemed to work.
Around the same time I had bought a new WD Caviar 750GB SATA drive.
It was that drive that would cause problems with Vista after the install.
I thought it was something in Microsoft Windows Update that was causing my personal ****, not my equipment. And MS for their drivers. Somebody else's.
And mind you, I would go through install half a dozen times, try installing Boot Camp before updates, after updates, not at all, add AV software.
I finally -- after a full year -- learned a lot (don't learn from things just working and I still say it has always been "Plug and Pray" PnP ) things work. I know the frustration and aggravation and the wish that things were different somehow.
The BSODs that I got were not from Apple Boot Camp. I even ran my system w/o Boot Camp for six months. And this time, with Win7, everything worked fine, wake, sleep, networking, no need for Apple drivers. At all.
I hang out on a forum where people build their own, X58 board, Intel Core i7, eVGA graphics. And how to get even DDR3 to work, and then how to get the most out of and push it to the extreme, then throttle back a notch.
The nice thing about that is you learn from it, like you do from racing and sports, to build a better mousetrap.
Nvidia is bleeding. Even as they and ATI want to stay on leading edge. Intel is contracting (even as they have their best cpu technology ever coming out) and costs that should go into R&D may be harder to "justify" or all the prototype programmers engineers and testing labs. Everything is more commoditized than ever.
Bottom line: I have Leopard 10.5.6. It has Boot Camp 2.1.2 version, later than the 2.1 download. And there has not been a single update posted online. But my original Leopard DVD 10.5.0 has the SAME contents packaged as 2.0 as were in the 1.4 Beta. I spend $129 for a new DVD to get the latest drivers. Make sense?? of course not.
Oh, and my Mac with 64-bit hardware, cpu, the EFI BIOS is 32-bit so no official support from Apple to install BC 2.1.2 or use Vista 64-bit. Snow Leopard will be 64-bit kernel, require and enforce 64-bit drivers. Should be interesting. Because technically, and logic, would say I don't have a true 64-bit BIOS environment.
Got an iMac? not supported with 64-bit. MacBook 2008 had 64-bit support, but not the "Late 2008" there you need MacBook Pro. And yet everyone wants to address more than 2GB (Apple EFI32 allows access to 3.3GB on some, 1.9GB on others, and in my Mac Pro? limited to 1.9GB memory in Windows.... so you know I don't want to run a Xeon workstation in Windows 32-bit.

Boot Camp MBP '11, W7 Install = Black Screen

I'm struggling with getting Boot Camp up and running on my new MBP.
Since it is likely relavent: I have installed an OptiBay in my MBP 15 (high end) with a secondary hard drive, with my SuperDrive connected externally via USB.
After creating a boot camp partition, the machine reboots with a Windows 7 Ultimate 64-bit install disk in the SuperDrive. The disk reads like it's preparing to install, the white screen stays up until the disk stops being read, then the white screen turns to an active black screen as if it is going to display something, but then it just sits at a black screen for ages until I just have to turn it off because it's not going anywhere. I've tried a number of different install disks, all with this same problem.
After an entire night of trying to get the above to work, I decided to remove the OptiBay and put the SuperDrive back in its place and try to install Boot Camp on the primary HDD. In fact after doing this I had even less success, the disk would read and the screen would stay white for a long period of time, and then the Folder w/ Question Mark image would blink on the screen as if it couldn't find what it was looking for to boot up.
I'm at a total loss here, haven't seen anyone else with similar issues and can't for the life of me figure out what is going on here. At first I thought it was my install media, then the drive configurations, and now I just don't know. I suspect drivers but I've also seen other people post they've installed W7 without issue so it's probably not that. Any ideas?

you could Try to disable the wrong graphics card driver:
Run the Windows installer,
wait, until the black screen appears, then, wait for maybe 15minutes to be safe
shutdown the computer by holding the power key for >10sec.
turn on the computer, press several times F8, as soon as the machine boots, until you get the windows startup menu options.
choose safe boot
Now windows will start, but there will be a messages that setup cannot continue in safe mode.
Do not click continue/shutdown.
press SHIFT-F10
A command prompt comes up
enter: compmgmt.msc
then look for the device manager,
expand the graphics card section,
right click the graphis card, choose "disable"
close the program
exit the command prompt
now click on the restart computer button
Computer will restat, setup should continue normaly
Finally install the apple supplied drivers.
does that help ?

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Boot Camp 2 issues: repartioning; DVD-drive; screen; sound; usb-power

I found various problems in version 2 of Boot Camp (included in Leopard).
1.
After removing the Boot Camp 2 Windows partition, it is impossible to recreate a new Windows partition. Somehow the windows partition is not completely removed (?) and the Boot Camp Assistent goes on forever restoring the Macintosh HD to its original (one partition) state. Strangely, you can just quit the assistant during this process without consequences. Only repartitioning the complete HD using Disk Utility resolves this (this of course requires a complete reinstallation of OS X).
2.
After installation of Windows XP Pro, Windows treats the DVD-drive (OPTIARC DVD RW AD5630-A) as a removable media, just like a USB-memory. This means that you can remove the DVD hardware from the system(using the tray icon "Safe Removal hardware") by just one click. The DVD drive then completely disappears from 'My Computer' even with a CD in! The only way to get the DVD-drive back is by restarting Windows (inserting a disk can be done but it is impossible to access the disk; ejecting the disc is also impossible (the eject key on the mac keyboard doesn't work).
3.
I suspect that there is something wrong with the video driver in windows. This can be noted for instance with the black "moon crater" as the desktop image (lower left corner) or in the windows login-screen (lower blue part of the screen). The issue may be described as pixels varying in brightness and colour in a fast way. Pixels are not "constant" and it seems like a wave is moving over these parts of the screen. It seems more or less comparable to the problems reported with Boot Camp beta 1.4 on MPB's.
4.
I also suspect the windows sound driver (RealTek) not to be ok. Every Windows sound (startup Chime, warning, etc.) is followed by a strange electronic sound, as if the sound is echoing while fading away. I did not try to play an audio CD, but I think this may result in a not so pleasant experience.
5.
When I connect my 2 GB Kingston USB-memory to the internal hub of the new apple keyboard, Windows starts complaining that there is not sufficient power. The same configuration works without problems under Mac OS X.
Has anyone similar experiences? To me it seems like Boot Camp is still in beta stage....

I also encountered problems 4 and 5:
*To no. 4: Distorted sound and background noise:*
It's exactly the same as described by HLO-HL. As soon as the soundcard gets turned on in Vista (by any program i.e. iTunes, Mediaplayer) there is this background noise. Watching a DVD is almost impossible. Listening to music in iTunes is somewhat ok, but only at high volume (so the background noise cannot be heard) and it is still distorted sometimes.
I tried about everything from installing the latetest Realtek driver, updating the Intel chipset drivers, to changing the bitrates and so on. Still no resolution found. It seems the many others experience the same problem (search for 'distorted sound Vista').
*To no. 5: Low USB power reported*
I got this message with every device I connected (no matter if it was a 2.5''-harddrive, a cardreader, a camera or just a simple memory stick ...

Installing Windows 7 Without Using The Boot Camp Installer (MacBook Pro)

I don't know if anyone knows this or not, but I was able to install Windows 7 on my MacBook Pro just using the Windows 7 install disk.
I restarted with the windows CD in, and when the screen said press any key to boot from CD, I pressed the space bar. When it got to the part to select the installation drive, I went into advanced and removed all the partitions and formatted the whole thing. There was a small system partition the cannot be deleted (probably reserved for the system). I was able to install Windows 7 and use the whole drive for it.
After running Windows 7, I was still able to install the Boot Camp Control Panel to set the keyboard, track pad, sound, and all the other funtions. If I tell it to reboot to the Apple OS, it just reboots to Window 7 with no problems.
Anyway, I thought it was pretty cool and might be helpful for people who want to run only Widows 7 on their MacBook Pro.
CAUTION... DO THIS AT YOUR OWN RISK!!!

People have been using Mac as Windows-only.
On Mac Pro, with 4 internal drives, it is normal to not use anything other than the Windows DVD and install onto a dedicated drive, same as you did, only change it from GPT to MBR first.
There is no risk.
(Well, some feel that someone might 'need' OS X to do something like a firmware update I guess.)

Enormous frustration over Boot Camp installation of Win 7 64bit

Please help, I am totally frustrated after days and days of trying to install windows 7 on my iMac 11,2 (21.5”, i3, mid 2010).
So, my super drive is dead and currently I don’t have an option to replace it. I recently upgraded my OS to 10.8.3. Because my iMac is having an optical drive, in Boot Camp Assistant there was a grayed out option to create bootable USB drive. I edited info.plist file, so I finally got that option right, but no metter what, I can’t boot Windows 7 64bit installation. I’ve tried numerous ways to do that. I tried standard create USB in Boot Camp assistant, I’ve tried Windows download DVD/USB tool, I’ve tried Rufus, BootInIc, I’ve tried more than 10 different Kingston/Verbatim/No name/Corsair/Patriot USB sticks, I’ve tried several WD/Toshiba/Transcend/Silicon Power external drives formatted both fat32 and NTFS (when formatting external drive in fat32, I was reducing the external drive’s size with diskpart/create partition primary commands in windows. EVERY SINGLE TIME after partitioning the hard drive in Boot Camp Assistant, my computer restarts and there was a “No bootable device” screen. I’ve than tried Refit, there I get an option to boot from external drives/usb sticks, but than after clicking on a boot windows from USB I also get the “no bootable device” screen. I’ve tried naming sticks different (because some people are saying that it must be named WININSTALL, but without any success)
Thank you very very much in advance, currently I don’t know what to do next.

If your iMac came with an internal optical drive you can not use the USB port to install Windows. Get the optical drive fixed.

Boot camp won't install xp (bank screen)

Pleas can you help me. I've got a new 2.8 quad mac pro with a mac 17" display.
When I use boot camp assistant, I can partition the disk (20G). When I put my xp sp2 disk in to load windows my computer does restart, I can here the disk working but I have a blank screen. Could it be something to do with my mac 17' display? Please can you someone help me

Welcome to the Apple Forum:
When you restart the computer (with Windows CD in the drive) Press and Hold the OPTION key until you see boot options. Choose the Boot From CD and see if the installation continues.
Please click [HERE|http://discussions.apple.com/thread.jspa?threadID=1424348&tstart=60] for more discussion on this topic.

Boot Camp Installation freezing at Boot Manager screen....

Similar Messages

Maybe you are looking for