Boot camp installation issue

Hi!
I boot camped my mac today, and everything worked fine, untill i should install the Windows 7, after i had partitioned my mac.
So after the partition, my mac restarted and opened in Windows. So i begin to install, when suddently i have to choose where i shall save the Windows 7. The problem is, that there is NONE harddrivers. It says: a requied CD/DVD drive device driver is missing. If you have a driver floppy disk, CD DVD or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safly remove it from this step.
I made a vid with some pictures of it: http://www.youtube.com/watch?v=2pYbOqheo9s&feature=channel_video_title
This is really annoying me, so if you know anything please tell me! I would really appreciate it!

Actually, you must have Windows finish its installation before installing the Bootcamp Drivers. When you get in your desktop for the first time, go to: Start> My Computer> Select your Mac's DVD Drive. Look for an "eject" button in the Windows Explorer window.
You may also want to check the Bootcamp Installation guide for Mac OS X Snow Leopard (10.6), it comes handy in these situations:
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
This is the one for Mac OS X Lion (10.7):
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
EDIT:
Added a video tutorial from CNET, but follow the Apple Provided installation guide:
http://www.youtube.com/watch?v=9dLcJmDIccc
This video is more up to date:
http://www.youtube.com/watch?v=X-CXTovYk3A&feature=related
Note that the tutorial says that Windows 7 is not compatible, this not longer the case after the release of Bootcamp 3.1.
Message was edited by: vea1083

Similar Messages

  • Boot Camp Installation: Definition of, and insights into "External Drives"?

    I'm recovering from a logic board failure. One casualty was that I lost my prior Boot Camp installation of Windows on my main internal hard drive. :-( Wondering if I can install Windows anywhere other than the main internal hard drive so I can maximize space on my OSX main internal drive?
    From what I've gathered, installing Windows 7 Boot Camp is very difficult (and perhaps impossible?) on an external hard drive. However, what's not entirely clear is what constitutes an "external drive".
    Questions:
    1. Can I install a bootable installation of Windows 7 using Boot Camp (obviously not running OSX in this scenario) on either the:
         A) Data Doubler 7,200 drive
    or
         B) Express Card 34 SSD drive
    2. Can I also install Parallels (on the main internal OSX drive), then while in OSX launch (a much slower) Windows from location A or B?
    Context:
    1.  On a late 2011 MBP 17' (version 8,3), I've replaced the stock hard drive (7,200 rpm) with a much faster OWC SSD Drive. (Awesome upgrade, btw!)
    2. The internal apple dvd device was removed and the stock hard drive was inserted in this location using OWC Data Doubler. (Also, very nice.) An extra challenge here is that the dvd drive is now an external device. I have a Windows 7 install disc, but I'm not sure if it will be recognized during the installation process?
    3. This model MBP has an ExpressCard 34 slot, for which I can buy an SSD drive. Never used this slot and have read mixed reports on boot ability.
    Any and all insights greatly appreciated!

    Yoüf wrote:
    Many thanks for the helpful response, Loner T.  I think I've got it. To install Windows through BCA on the Optibay drive, I temporarily move it to the main SATA bay. I can then temporarily put the DVD drive back in the Optibay. So here's a question: In doing this, I would no longer have an OSX boot drive (since I'm temporarily removing my OSX boot SSD). It's been a while since I used BCA, so my memory is fuzzy (sorry), but does the BCA process need a working OSX install on the drive in the SATA bay?
    The SSD with OSX boot is normally (for your specific scenario) kept in an external enclosure (USB/FW/TB) to boot from and run BC and partition the disk in the main SATA bay.
    You mention that modifying the BC info.plist causes issues. I lost you a little here. Using the method you describe (move the Optibay drive to the SATA location, run BCA to install Windows, then move the drive back to the Optibay location), does the BC info.plist need to be modified or not?  If yes, a few more details would be welcomed. If not, what prompted this thought?
    If you have a functional Optical drive and the designated Windows-to-be in the proper bays, the BC info.plist modifications are unnecessary, and can cause other grief, and are best avoided.
    Thanks also for the bleeptobleep post. It says to use a USB3/Thunderbolt external drive (which I do have); however, my MBP (version 8,3) only has USB2 ports. I realize that a USB2 port will read a USB3 external drive, but was wondering if this limitation is a deal breaker for a bootable Windows system, or if it just means that things will be really, really, tragically slow due to low transfer rates. Any idea on this aspect?
    USB3 can cause problems for Windows 7 installer, bot not as many issues for Windows 8+. It is better to stick to USB2, but you are correct it will be slow. OSX can boot and will use RAM much more aggressively, unless it has to go back to the USB (2/3) when things may give you a beach ball. Windows 7/8 are less friendly for caching the whole OS and applications in RAM, and may be slower. A TB connection is much faster (TB2 even better).
    BTW: Bummer that the ExpressCard slot can't work for booting into Windows. That would be pretty slick. I've seen some older posts by folks who were once able to do this, but seemingly only with early versions of OSX. Apparently newer OSX versions either did away with this feature, or seriously complicated the process. Would love to find a workaround if one exists.
    You can test it, but may have some issues finding storage for ECards.
    (Dumb question: on this forum, how are you threading comments into a quoted block of text? Are you using HTML or is there some easier way?)(((
    Under the "Reply" bar at the top, there is an icon with a "quote" and a "speech" bubble, which is used to quote posts. You can either quote from a previous post, or select a line (or more) of text and click on that icon.

  • Boot camp Win7 issue

    Hello everyone, I have a new 15" Macbook Pro and am having problems installing Windows 7 via boot camp. I followed the boot camp installation instructions, and am able to get Win7 to install and setup (user name, date/time, etc.) after that, the computer restarts but will not boot into Win7. When I hold option key at startup and select "Windows," the screen turns black with a blinking grey cursor at the top left of the screen, then the computer restarts and thus repeating the issue.
    How can I get past this and get Win7 installed and working correctly?
    My specs:
    15" MBP
    OS X 10.8.1
    2.3 GHz Core i7
    4GB 1600 MHz DDR3
    500GB Hard drive
    512MB GeForce GT 650M
    Windows 7 Home Premium

    I don't know, what did you leave out ? partition was too small? allocated 40GB very minimal while 60GB is more reasonable. 20GB will high likelihood fail.
    Windows installed updates that conflict (turn off auto updating and review each, and beware of graphic updates from Windows - that is true even on PC).
    Do a safe boot or from DVD and try to go back (may be too early to do even that).
    ISO burned to DVDs fail.
    You have not yet installed the GT 650M driver, but when you do install Apple support you may need to single that one out and do it again on its own manually.

  • Help evaluating complex boot camp installation

    I need to do a bit tricky boot camp installation, and would appreciate if somebody could evaluate before hands whether the plan outlined below should work, or if i should try some different approach:
    Current setup is Tiger with two OS X partitions (16gb root, rest mounted under /Users)
    Desired setup is Tiger with two OS X partitions, AND a Windows Vista partition.
    Plan is:
    - Make disk image of the current (Tiger) root partition, and backup of /Users
    - Boot from install DVD, re-partition the internal disk to single partition, restore the disk image to the single partition
    - Upgrade to Leopard
    - Install Boot Camp and Windows Vista
    - Use 'diskutility resizeVolume' to split the Leopard partition to two
    - Overwrite the first partition with the original Tiger disk image
    - Restore Data to the second partition
    How about? Will Boot Camp continue to operate when i overwrite Leopard system with the Tiger disk image, and when i split the single partition to two pieces? Or is there some other recommended way for doing this?
    Thanks,
    Henri Karapuu

    'diskutility resizeVolume' should had naturally been 'disktool'. Also sorry about the layout, for some reason single dashes in front of each line got eaten.

  • Issue with boot camp installation

    Hi, i have som problem with installing boot camp. I get an error message in the Windows installation guide that my superdrive are missing the correct drivers. I have tried to eject the Windows disk to insert my Snow Leopard recovery disk, but i cant eject it during the set up.
    Any suggestions?

    First post so sorry if this is not in the right place but wanted to post this so it might help someone.  I have installed boot camp on macbook air and had no issues.  We were trying to install Boot Camp on new macbook pro with 10.7.4 and boot camp 4.0.4.  We could not get it to burn the windows support files.  It would download the windows support files but fail to burn every time with no option to save the file.  I forget the exact verbage.  After searching all over the web  / forums, etc we tried several times and it would fail every time.  We finally thought that maybe it was too large of a download to fit on a CD so we tried it with a DVD and BINGO!!  I feel stupid but seriously!!!!  It couldn't just tell us that the target was not large enough.  Just wanted to post for others.  Thanks

  • MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

         Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
          After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
         After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
         The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
         At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
         Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • New Macbook Pro retina boot camp install issue - Windows 7

    Trying to complete a boot camp install but can't get past creating a partition.  I am able to download the windows drivers through boot camp, it burns them to a DVD, verifies the DVD (couldn't use CD-R as it kept saying burn failure after verifying files) and then takes me to the make a partition page.  When i click install the partition, it pops up saying "can't find the installer disc" and wants me to put one in the super drive.  What gives?  I have that disc in the drive, also tried the Windows 7 disc and got the same error.  So basically I can't create a partition to install windows 7 that I have.
    Any thoughts?

    The disk was from my other PC system, however it is an OEM upgrade disc.  Maybe that is the problem but if that is the case why did it work when I installed it through VMware and it worked fine?  The disc can be used as a self full install of windows 7.  I have also it on another PC with no issues.  Trying to convert to Mac finally but this is causing a hiccup.
    The next question then is do I really need to go the boot camp way?  I only need it to run quickbooks (need windows version for reasons) and a couple of other programs but thought it may run better as a boot camp install rather than VM plus I couldn't figure out how to reduce the size of the partition that VM installs, it takes too much space from me for no reason (60Gb).
    Thanks for any input.

  • Boot Camp 2 issues: repartioning; DVD-drive; screen; sound; usb-power

    I found various problems in version 2 of Boot Camp (included in Leopard).
    1.
    After removing the Boot Camp 2 Windows partition, it is impossible to recreate a new Windows partition. Somehow the windows partition is not completely removed (?) and the Boot Camp Assistent goes on forever restoring the Macintosh HD to its original (one partition) state. Strangely, you can just quit the assistant during this process without consequences. Only repartitioning the complete HD using Disk Utility resolves this (this of course requires a complete reinstallation of OS X).
    2.
    After installation of Windows XP Pro, Windows treats the DVD-drive (OPTIARC DVD RW AD5630-A) as a removable media, just like a USB-memory. This means that you can remove the DVD hardware from the system(using the tray icon "Safe Removal hardware") by just one click. The DVD drive then completely disappears from 'My Computer' even with a CD in! The only way to get the DVD-drive back is by restarting Windows (inserting a disk can be done but it is impossible to access the disk; ejecting the disc is also impossible (the eject key on the mac keyboard doesn't work).
    3.
    I suspect that there is something wrong with the video driver in windows. This can be noted for instance with the black "moon crater" as the desktop image (lower left corner) or in the windows login-screen (lower blue part of the screen). The issue may be described as pixels varying in brightness and colour in a fast way. Pixels are not "constant" and it seems like a wave is moving over these parts of the screen. It seems more or less comparable to the problems reported with Boot Camp beta 1.4 on MPB's.
    4.
    I also suspect the windows sound driver (RealTek) not to be ok. Every Windows sound (startup Chime, warning, etc.) is followed by a strange electronic sound, as if the sound is echoing while fading away. I did not try to play an audio CD, but I think this may result in a not so pleasant experience.
    5.
    When I connect my 2 GB Kingston USB-memory to the internal hub of the new apple keyboard, Windows starts complaining that there is not sufficient power. The same configuration works without problems under Mac OS X.
    Has anyone similar experiences? To me it seems like Boot Camp is still in beta stage....

    I also encountered problems 4 and 5:
    *To no. 4: Distorted sound and background noise:*
    It's exactly the same as described by HLO-HL. As soon as the soundcard gets turned on in Vista (by any program i.e. iTunes, Mediaplayer) there is this background noise. Watching a DVD is almost impossible. Listening to music in iTunes is somewhat ok, but only at high volume (so the background noise cannot be heard) and it is still distorted sometimes.
    I tried about everything from installing the latetest Realtek driver, updating the Intel chipset drivers, to changing the bitrates and so on. Still no resolution found. It seems the many others experience the same problem (search for 'distorted sound Vista').
    *To no. 5: Low USB power reported*
    I got this message with every device I connected (no matter if it was a 2.5''-harddrive, a cardreader, a camera or just a simple memory stick ...

  • Need to repair boot camp installation on each sleep/reboot

    I Have a Mid-2009 Apple Macbook Pro computer with Windows 7 installed on it.  I use the Boot Camp drivers version 3.2.  These days i have an issue: every time I put the computer to sleep or reboot it, the boot camp drivers go faulty; the special keys stop working, the keyboard baklight stops working and every setting in the boot camp control panel goes to default.  The only solution to this is to use the BC 3.0 installer to repair.  Any ideas on how this problem might be resolved?

    Ok, here was the rundown of my situation, and the solution:
    I partitioned the disk through Bootcamp, tried to install Windows, and got to the point where it asks which partition to install on. It showed one with about 130GB, and that was ALL. So I backed out. Upon reboot, I tried to get back into the Mac OS by holding the Option key, and it wouldn't show me the option to go back - just the boot disk, and the Windows HDD (on which there was nothing yet, and which disappeared as an option on the next reboot).
    In speaking to the support line, I formatted my hard drive re-installed, and we suspected the problem was due to the 10GB partition I created - apparently Windows XP needs 15GB to install itself. Maybe it just picked the wrong partition and screwed it up?
    I tried the process again, same thing happened. I called the support line again, got someone different, and was informed of my real problem:
    ------I was using a Windows XP disk I had received with my PC when I bought it a few years ago (an OEM Windows XP disk)-------
    Apparently you can't do that for some reason! I was told that my partitioning was ok, and it was the copy of Windows that was screwed up, and I would have to go buy a new version (which I'm not going to do).
    Before trying Boot Camp, I had this exact copy of Windows installed through Parallels, and it worked fine - I just stupidly decided to make the switch to Boot Camp and all **** broke lose. Back to Parallels!

  • Boot Camp Drivers Issue

    Hello,
    I'm in the process of setting up Windows 7 Home Premium on my Macbook Pro OS X 10.6 through Boot Camp. I have succesfully installed Windows 7 on my machine, but I am now stuck on step 4: installing the Boot Camp Drivers for Windows. When I insert my Mac OS X installation disc on the Windows 7 operating system I get a message saying, "This version of Boot Camp is not intended for this Computer Model".
    I tried to do some research and found suggested methods for solving this problem. One of which was to open the "BootCamp64" file on the disc under Boot Camp>Drivers>Apple. When I attempted this I got a message saying, "This installation requires elevated privileges. Launch the installer through setup.exe". I then right clicked on "BootCamp64" and selected "Troubleshoot Compatibility". I received the same message. I then opened "Setup" and still no luck: "This version of Boot Camp is not intended for this computer model" (even when I tried opening "setup" as administrator). I also tried another suggestion of launching the BootCamp64.msi file through the Command Prompt, but that doesn't work either and I receive the same messages.
    I've read that these methods worked for many people, but I can't seem to solve the issue at all and feel like I've done all I can. Any sort of help and recommendations would be greatly appreciated. Thank you!

    a) The first boot camp driver update to Windows OS must be done with the OSX install disks that came with your
    Mac(BookPro) purchase.
    I believe this must be the problem then. The Mac OS X installation disc that I am using belongs to a friend of mine and came with the purchase of his machine (the same Macbook Pro version as mine, 10.6). I thought about whether this would be an issue before I started the process but I've heard that it didn't make a difference for certain people, since the disk I've been using is the same OS X version as my machine.
    Is this it then?  I seem to have misplaced the install DVDs that came with the purchase of my Macbook Pro, so I suppose I should start looking for them.

  • Boot Camp Install Issue

    I have a 27 inch Imac using OSX Lion 10.7.3 and I would like to install Bootcamp so I can load Windows 7. When I try to use Bootcamp Assistant I get the following message, "The startup disk cannot be partitioned or restored to a single partition." I've gleaned from the forums that I'm going to have to reinitialize the hard drive and reinstall Lion so I can properly use Bootcamp.
    Once I reinitialize the drive and reinstall Lion, should I use Bootcamp to create the partition before I restore my Time Machine backup, or should I wait to use Bootcamp until after I've restored my backup? I'm worried that if I wait until after the restore that it would just take me back to "The startup disk cannot be partitioned or restored to a single partition." again. But I'm also worried that if I use Bootcamp before the restore that restoring everything will overwrite the partition, Windows install, etc.
    I hope this makes sense. Any help would be appreciated.

    The disk was from my other PC system, however it is an OEM upgrade disc.  Maybe that is the problem but if that is the case why did it work when I installed it through VMware and it worked fine?  The disc can be used as a self full install of windows 7.  I have also it on another PC with no issues.  Trying to convert to Mac finally but this is causing a hiccup.
    The next question then is do I really need to go the boot camp way?  I only need it to run quickbooks (need windows version for reasons) and a couple of other programs but thought it may run better as a boot camp install rather than VM plus I couldn't figure out how to reduce the size of the partition that VM installs, it takes too much space from me for no reason (60Gb).
    Thanks for any input.

  • Slow restart - blue screen BSOD and Boot Camp restart issue

    After Snow Leopard install on Macbook Pro I have experienced a very slow startup and restart. The grey apple screen appears for about 25 secs and then the blue screen hangs for 2mins and 2 secs. Also when restarting from Boot Camp blue screen just stays and restart fails. I waited approx 25 mins and blue screen was still there. I have searched Console system log for clues but am not technically adept. hopefully someone can help. I have copied log below form recent restart (in OSX mode, not boot camp). My Windows Boot camp volume is called ERICGLPC and I can see some issue on the log but unsure what it means.
    Aug 29 23:56:02 eric-lawrences-MBP-2 loginwindow[55]: DEAD_PROCESS: 55 console
    Aug 29 23:56:03 eric-lawrences-MBP-2 com.apple.kextd[10]: Error reconsidering volume /Volumes/ERICGLPC.
    Aug 29 23:56:03 eric-lawrences-MBP-2 shutdown[265]: reboot by ericgl:
    Aug 29 23:56:03 eric-lawrences-MBP-2 shutdown[265]: SHUTDOWN_TIME: 1251554163 308941
    Aug 29 23:56:03 eric-lawrences-MBP-2 mDNSResponder[19]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) stopping
    Aug 29 23:56:03 eric-lawrences-MBP-2 mDNSResponder[19]: mDNSRegisterinternal: Shutting down, can't register 20 Eric\032Lawrence’s\032MBP.device-info.tcp.local. TXT model=MacBookPro2,2
    Aug 29 23:56:03 eric-lawrences-MBP-2 WindowServer[75]: hidd died. Reestablishing connection.
    Aug 29 23:56:03 eric-lawrences-MBP-2 DirectoryService[11]: dnssd_clientstub read_all(20) failed 0/28 0
    Aug 29 23:56:03 eric-lawrences-MBP-2 DirectoryService[11]: dnssd_clientstub DNSServiceRefDeallocate called with invalid DNSServiceRef 0x10061cc00 FFFFFFFF DDDDDDDD
    Aug 29 23:56:03 eric-lawrences-MBP-2 WindowServer[75]: bootstraplookip failed: Unknown service name
    Aug 29 23:56:03 eric-lawrences-MBP-2 DirectoryService[11]: dnssd_clientstub read_all(19) failed 0/4 0
    Aug 29 23:56:03 eric-lawrences-MBP-2 sudo[269]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
    Aug 29 23:56:19 localhost com.apple.launchd[1]: * launchd[1] has started up. *
    Aug 29 23:56:26 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
    Aug 29 23:56:27 localhost pcscd[27]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
    Aug 29 23:56:28: --- last message repeated 1 time ---
    Aug 29 23:56:28 localhost configd[15]: network configuration changed.
    Aug 29 23:56:28 eric-lawrences-MBP-2 configd[15]: setting hostname to "eric-lawrences-MBP-2.local"
    Aug 29 23:56:30 eric-lawrences-MBP-2 configd[15]: network configuration changed.
    Aug 29 23:56:43: --- last message repeated 1 time ---
    Aug 29 23:56:43 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[55]: Login Window Application Started
    Aug 29 23:56:44 eric-lawrences-MBP-2 bootlog[65]: BOOT_TIME: 1251554179 0
    Aug 29 23:56:44 eric-lawrences-MBP-2 blued[66]: Apple Bluetooth daemon started
    Aug 29 23:56:44 eric-lawrences-MBP-2 fseventsd[59]: checkvol_last_modtime:XXX failed to get mount time (25; &mount_time == 0x1000b5358)
    Aug 29 23:56:44 eric-lawrences-MBP-2 fseventsd[59]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 640F51B0-A701-4DF7-84CD-9DE7DA23AD26
    Aug 29 23:56:44 eric-lawrences-MBP-2 sudo[84]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
    Aug 29 23:56:45 eric-lawrences-MBP-2 com.apple.usbmuxd[49]: usbmuxd-167.1 built for iTunesEightTwo on Jul 9 2009 at 14:02:00, running 32 bit
    Aug 29 23:56:48 eric-lawrences-MBP-2 mDNSResponder[18]: SIGHUP: Purge cache
    Aug 29 23:56:51 eric-lawrences-MBP-2 loginwindow[55]: Login Window Started Security Agent
    Aug 29 23:56:52 eric-lawrences-MBP-2 configd[15]: network configuration changed.
    Aug 29 23:57:07 eric-lawrences-MBP-2 ntpd[43]: time reset +0.640880 s
    Aug 29 23:58:46 eric-lawrences-MBP-2 loginwindow[55]: Login Window - Returned from Security Agent
    Aug 29 23:58:46 eric-lawrences-MBP-2 loginwindow[55]: USER_PROCESS: 55 console
    Aug 29 23:58:46 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[120] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    Aug 29 23:58:57 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[120] (com.apple.Kerberos.renew.plist[138]): Exited with exit code: 1
    Aug 29 23:59:00 eric-lawrences-MBP-2 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[131]: ATSFindFolder timeout. (domain:-32764, dirType:'font', createFolder:false, ATSServer pid:131)
    Aug 29 23:59:01 eric-lawrences-MBP-2 ServerScanner[135]: Not scanning because node /Active Directory/All Domains is in searchPath
    Look forward to hearing from anyone.
    Many thanks
    Eric

    JoePrairies wrote:
    if anyone could perhaps shed some light on why this might have occurred?
    Your Mac may have if you didn't erase the log files
    Without that, it could have been anything.
    -mj

  • Can not boot into OSX after boot camp installation and resizing of Macintosh HD

    So from the beginning what I was trying to do was set up my iMac (27-inch, Late 2013)  with boot camp so that I could play some old windows based games that can not be played in Parallels.
    I went through the Boot camp process and everything set up just fine.
    I had both OS X Yosemite 10.10.2 and Windows 8 Professional running but as I was installing games on to boot camp I discovered I did not allocate enough space and needed to extend the Boot Camp partition.
    I used boot camp utility to set OS X as the default start up disk and had it restart
    I launched into OS X and used Disk Utility to shrink Macintosh HD another 120GB
    Restarted again holding option and launched into Windows
    Used the disk management in windows to try and extend the boot camp partition into the unallocated space.
    It was not an option to extend it so I tried to create a new simple volume from the unallocated space then delete it and try to extend it again.
    It still was not an option.
    From there I went to restart again while holding option and the only options I had were 10.10 Recovery and Windows
    I tried using disk utility in recovery and Macintosh hd now only showed disk0s2
    I tried to verify and it could not verify
    I tried to repair and it could not repair.
    I put the iMac in target disk mode and using a thunderbolt cable I tried using disk utility from my MacBook Pro (13-inch Mid 2012)
    Verifying volume “disk2s2”Verifying file system.** /dev/rdisk2s2
    Invalid BS_jmpBoot in boot block: 000000
    File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “disk2s2”Repairing file system.** /dev/rdisk2s2
    Invalid BS_jmpBoot in boot block: 000000
    File system check exit code is 8.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    This is the same error I got on my iMac
    I used terminal diskutil list and got:
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk2
       1:                        EFI EFI                     209.7 MB   disk2s1
       2:       Microsoft Basic Data                         799.3 GB   disk2s2
       3:                  Apple_HFS Recovery HD             650.0 MB   disk2s3
       4:       Microsoft Basic Data BOOTCAMP                70.3 GB    disk2s4
    I can see that Macintosh HD was disk2s2 but it now shows its Microsoft Basic Data.
    I did not format this partition and it was working fine till I restarted the computer after resizing Macintosh HD.
    I am not sure what I can do to fix this.
    I've found multiple articles about similar issues, but the issue thet they have was that they could not boot to Windows instead of my issue not booting to OS X

    ****************    Update    *****************
    From the Windows Partition using Disk Management I can see that the drive is still labeled Macintosh HD and that all of my data is there.
    I have a complete backup so i'm not worried so much about the data.
    What I'm most interested in is trying to solve this issue because I'd like to continue using boot camp and I actually work with mac computers and would like to be able to help others if this issue arrises again.

  • A few questions about Boot Camp: installation, performance, which Win OS?

    Hello.
    I am planning on getting a windows OS. My main motives for this are because I would like to get some PC only games (I've been eyeing that Fallout 3 Game of the Year Edition that is soon to come out) and because there is a good chance that I will need some PC only programs for my college work. I just had a few questions before I did anything. Note: I am running 10.5.8 now but getting 10.6 soon.
    1. According to wikipedia: "Its functionality relies on BIOS emulation through EFI and a partition table information synchronization mechanism between GPT and MBR combined". The only word I understood of that sentence was "emulation." I know that emulation software significantly reduces performance. Is this true for boot camp? (say i were to get the exact same game for both mac and windows and set them to the exact same performance settings, when playing on windows, would there be more lag than on OS X?)
    2. Which Windows OS should I get? Since I am just going to be using Boot Camp to run games and a few other programs, would XP be the best to get to optimize the application's performance (as opposed to Win 7)?
    3. How complex is installation? I am a decent Mac techie, but this is my first time with boot camp, and I am a Windows noobie.
    4. There seems to be a lot of talk about partitions. What exactly is a partition? I have some theories, but want to know for sure.
    Message was edited by: Tomatoes&RadioWires

    Hi,
    check out the following link, excellent advice and performance tests on gaming.
    cheers,
    Dave
    http://www.mactech.com/articles/mactech/Vol.25/25.04/VMBenchmarks/index.html

  • Boot Camp Partition issue (still on OS X 10.4.8)

    Hi all,
    I'm trying to get Windows 7 up and running on my 2 year old MacBook Pro. Just bought the full version of Home Premium, as I've never installed any Windows on my mac before. Also, I haven't gotten Snow Leopard yet, so I'm still on OS X 10.5.8, which I think means a slightly older Boot Camp.
    So I go in to Boot Camp Assistant and try to partition my 50 free gigs into about 20 for windows and 30 for mac. Trying several times, it always comes up with the error "The disk cannot be partitioned because some files cannot be moved" and says I should back up my disk, make sure it is formatted as OS Extended (Journaled), and restore the disk from the backup. This is the part I don't know how to do exactly. Is it saying I have to basically wipe my HD and restore it from my external HD? Under restore in the Disk Utility I can drag my external drive into the "source" box, but can't put my mac HD in the "destination" box.
    So, anyone have any tips on how to move forward with the partitioning? Is it merely a space issue like I think, or is it a larger problem having to do with not being on Snow Leopard yet? I appreciate any advice or suggestions, I'm sick of spending so long trying to figure this out, haha.
    Thanks!

    I wish Apple would expand their own tutorial. The Boot Camp pdf; the FAQ; but it can be done with your OS X DVD and Apple Disk Utility's Restore; with other programs that are free, but require (essential to my thinking) that you have another drive or partition that you can boot from.
    Windows and you have rescue CDs. With a Mac you can have and boot OS X from multiple hard drives.
    Install OS X to drive #2 and use that to erase and restore.
    TimeMachine is 'okay' but you can't boot from it. And I've got to say a bootable backup is more important tool.
    The two most popular are Carbon Copy Cloner
    http://www.bombich.com or from http://www.macupdate.com
    SuperDuper from Shirt-Pocket Software, free for full copy, $29 for smart update of backup. Great PDF and of course no one looks to use the Help menu in programs (like Disk Utility even).
    Those backups can be important and handy to have before installing any Mac OS update.
    And there should be some 'Stickies' or "Most Popular Threads" or something because this question has been at some times a daily topic.

Maybe you are looking for