Boot Camp: Macbook Pro 8,2 wont boot from USB or External CD Drive

Im pretty far into this process, and I have already jumped through a few hoops. I have replaced my Superdrive with a HD and am trying to install Boot Camp on a late 2011 Macbook Pro 8,2. I have gone in and edited the info.plist by taking out PRE which allowed me to make a USB Bootable drive with Windows 7 Ultimate on it. I also have the install DVD with a an activation key for that. I have partitioned my HD with 50 GB of space for Boot Camp and Windows and then it prompts me to restart. At this point the computer tries to boot into Windows installer but instead gives me " No Bootable Device - insert bootable CD and press any key..." I have tried restarting holding option with the external CD drive and USB drive plugged in, with just the USB drive plugged in, and with just the external CD drive plugged in. With the CD drive plugged in and by holding option I do get the option to boot from OSX, Recovery, Windows, and EFI boot (the last two have the icon of a disk.) When I click on windows it goes to the black screen with No Bootable Device.... and when I tried EFI boot it just sits there for a really long time and does nothing. Any help?
I have already had people tell me to re-install my superdrive and try but that was a tedious process and I'd rather not do that. Thanks in advance,

Meh, with the price they take for a drive in Denmark, I don't think it's worth it... They take around 160 $ for the drive (that's the cheapest MacBook drive I could find), and I am not even sure that's the one I need.

Similar Messages

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

Got a new Macbook Pro today and I plugged in my WD external hard drive to backup with but it didn't allow me to backup.

Got a new Macbook Pro today and I plugged in my WD external hard drive to backup with but it didn't allow me to backup. The problem is that now my computer won't show the drive in finder. I can see it in Disk Utility and cannot access it. Help?

First
Finder>Preferences>Sidebar>Devices>External disk
but it didn't allow me to backup
did you get an error code or error dialog box?

I have a MacBook Pro and it cannot locate my Western Digital External Backup Drive.

I have a MacBook Pro and it cannot locate my Western Digital External Backup Drive. It used to work prior to Maverick but now it doesnt. Do I need a different cord or what can I do so I can use Time Machine with this drive?

Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router. For more information on Time Machine, check these Web pages:
Time Machine FAQs
Time Machine Troubleshooting

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

No bootable device boot camp macbook pro retina 10.8.4

Hi,
I am reposting this under this community instead of under os x system software since it looks like there is no way to move posts to a different community. Anyway, just bought a brand new Macbook Pro with retina display running 10.8.4. I have always been a PC guy so I wanted to create a small Windows 7 Professional edition partition. I am using bootcamp to try and install it but I keep getting the above no bootable device black screen when boot camp restarts the mac to boot from the usb. My flash drive is a Kingston Data Traveler 16GB. The kingston does not come with any of its own software. It's completely blank. I have to use usb since I have no optical drive. These were the three different ways I have tried so far.
1). Using my older lenovo PC, I created an iso image of my windows 7 disc using one of lenovo's bundled software: power2go.
Transferred it to my mac with the kingston and then ran bootcamp. - Failed
2). Used the windows 7 USB/DVD tool. Now when trying to do this, the tool said that the iso I have is not valid. I searched around the net for this problem and resolved it using another tool. Now before actually using the tool to copy the iso to the stick I thought to myself maybe this problem is why bootcamp failed. So I transferred the 'fixed' iso and ran bootcamp again on it and still same result.
3). Actually use the win7 tool and copy the iso to the usb. Since I had already partitioned the drive I didn't go throught the boot camp assistant. I was going to install the support software later after I could confirm mac could boot from the usb. I restarted the mac with this usb stick plugged in and same result.
Now in all three steps I actually pressed and held the alt/option key upon reboot and in all three instances there was no 'Wininstall' drive that I could select to start the installer. All I see is the macHD and the recovery partition.
Doing some searching there were some threads that discussed modifying the plist (in the disk utility app I think) but to me that was only so bootcamp could add in the option to create an install disk via usb. Since that problem isn't there I didn't bother trying it. Maybe I am wrong? Any other suggestions?
Thanks in advance.

Update: A user responded to the other thread. So the usb flash device that I am using is 3.0 and looks like there can be problems with that one. So the proposed a solution is to get an external dvd drive and try to install it that way. Perhaps a usb 2.0 stick might work as well. In either case I'll have to buy one. Will update this once done.
The other alternative is to use windows through a VM.

HT204267 Macbook Pro Mid 2011 Wont Boot

I have a macbook pro mid 2011 but wont boot. THe charging light and the power light in front come on but it does not make the start up noise nor anything like.

For those driving north of Belize, some distance into Mexico, there are
some authorized service providers and some independent resellers...
These are not exactly convenient to Belize users of Apple products.
And then there's Puerto Rico... between shipping & duties, + costs.
https://locate.apple.com/pr/en/
A different look into the Apple country locator may show retail resellers
though of those, as they are not Apple Store (company) those likely do
not offer a Genius bar such as the US & Canada. One could use Apple
locator page to see Apple sales independent affiliated resellers in Mexico.
Cancún area has three companies (total four locations) for Mac service.
Mérida apple retail independent resellers (seven) + two premium "iShop" w/ service
https://locate.apple.com/mx/en/sales/?pt=all&lat=21.0023779&lon=-89.609860299999 98
Cancún apple Mac authorized service independent providers (four shown this location)
https://locate.apple.com/mx/en/service/?pt=4&lat=21.161908&lon=-86.8515279000000 1
The Apple country locator page shows Belize -- But there are no listings in the Belize result.
Appears there may have been or could be some body there who had a business, once?
Sorry to say it would appear you have limited options, for sales and service;
when my dad lived in western Belize for 4 years and had Mac computers,
they took their own and backups. Occasional visits to the US allowed the
units to get service or repair a few times each year, if taken along.
Good luck & happy computing!

Boot Camp MacBook Pro

Im trying to Boot Camp my MacBook Pro and is asked to make a backup. Is there anyway around this or do i have to make a backup? Dont have an external harddrive and dont really wanna buy one just for this

The reasoning is, very BAD things can happen. And if they do, you will be back here asking for a fix. The fix is to have a backup.
I urge you to protect your investment and your data (not to mention your sanity) and get an external drive.
Sorry I don't know a workaround, and there may be a good reason there isn't one.

Tap to click Windows 8 Boot Camp MacBook Pro Mountain Lion?

I am running Windows 8 through Boot Camp on a 2012 MacBook Pro, and I can't figure out how to enable the tap-to-click feature that I use on the OSX partition of my hard drive. Can anyone help?

Change “Tap to Click” (and other preferences) using Apple’s Boot Camp Control Panel:
Hit Windows + W (er, Command + W) to search in settings, type “Boot Camp” and hit Enter/Return.
Answer “Yes” to the question about whether you want to let this app have its way with your computer.
In the resulting “Boot Camp Control Panel” switch to the “Trackpad” tab.

Macbook pro model A1278 wont boot osx stuck at grey screen

I have had my mbp for about 3 years now and has worked great. Just today i got home from work and when i opened the macbook which was already running I was in OSX but it was frozen with colored wheel spinning. I had never experiened this before but I didnt think too much of it and held down the power button to reset it. Now i am stuck at the grey screen with the Apple Logo and spinning wheel and cant get back into OSX at all. So i started googling (on another computer obviously) and tried:
1. boot in safe mode. Didnt work, still stuck at grey screen
2. boot in safe mode with "commd-shift-v" to see info. stuck in "dos" looking screen. see pic at bottom.
3. tried resetting VRAM w/ "commd-opt-p-r". did not work, still stuck at grey screen.
4. got original OSX install DVD. Was able to boot to disc and make it to disk utilities. went to repair and got error "unable to unmount disk"
5. ran "repair permissions" and completed that. ran "verify disk" and got green "disk ok" message. then re-ran repair and got same "unable to unmount disk"
so know i am worried. my main concern is the 80 GB of music I have on this computer (and dont currently have backed-up {que back-up lectures}) and my pictures. Does it sound possible to recover music and pics based on this little bit of info? Im willing to take it to the Apple store and pay the price if it sounds like I can recover it. I am pretty computer savy but am reluctanct to just start trying anything that could lose my music/pics. I cant try just deleteing and restoring OSX to factory settings and losing all that music/pics.
so...what is best approach to access and back up these files myself? I do have another macbook with a firewire connection but am not familiar with that process. I will get a external HD immediatly (now ofcourse)...can I backup my files from disc utility?
Thanks for any help.

Sorry about specs...i entered in drop box menu but realize doesnt show on thread:
MacBook Pro "Core 2 Duo" 2.53 13" (SD/FW)
2.53 GHz Core 2 Duo (P8700)
Intro Date:
June 8, 2009
Disc Date:
April 13, 2010
Order No:
MB991LL/A
Model No:
A1278 (EMC 2326*)
Subfamily:
Mid-2009 13"
Model ID:
MacBookPro5,5
Std RAM:
4 GB
Std VRAM:
256 MB
Std Storage:
250 GB (5400 RPM)
Std Optical:
8X DL "SuperDrive"
I was running the last vesion of snow leopard (10.6.8 i think).
I picked up a firewire today and am going to attempt to make "broken" macbook target and pull files onto other macbook. Will give an update tomorrow after attempt. Thank you for fast response.

MacBook Pro 8,2 wont boot after Ubuntu live test and long press shutdown

i was trying ubuntu 12.10 on my Mac in a live environment the other day, and as usual the fans were spinning very fast and the system got hot. So i rebooted into OS X and then while using the Macbook, the fans started spinning unusually fast! So i long pressed the power button and it turned off. when i rebooted however, it flashed the little LED (i think thats what its called, on the right side of the front) rapidly and beeped. then after like 20 seconds, the chime but as soon as it had chimed, the mac rebooted and repeated the chime-reboot about 4 times. Then it boots up normally into OS X. I read online about manually flashing firmware but alas, no joy. Now my Mac just crashes anyhow and even if i try to use it by keeping it on sleep all the time, it just wont wake or it just crashes. Please help, i have no warranty and i dont live in a country where we have an apple genius bar or the like .

It's your hardware. Your model must have been released with Snow Leopard 10.6.4 or later. You should have the needed version on the original discs that came with the computer. If no discs came with the computer then it came with Lion or Mountain Lion pre-installed. If this is the case then see the following:
How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
1. Create a new partition on the hard drive.
2. Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard
        system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1. Restart the computer and after the chime press and hold down the
               COMMAND and R keys until the menu screen appears. Alternatively, restart
               the computer and after the chime press and hold down the OPTION key until
               the boot manager screen appears. Select the Recovery HD and click on the
               downward pointing arrow button.
          After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.           In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.           Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the USB
flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external drive. Source means the Snow Leopard Mac's
internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination
      entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new partition on the internal drive. Source means the external drive.
You will need a retail copy of Snow Leopard. If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.

Macbook Pro Retina 13" wont boot after update. (28.01.2014)

Ok.
I got a notification that i have an update avalible, and i install it. It installs just fine and the Mac turns off.
When I boot, the apple logo shows, and a progress bare appears, and seems to complete the update.
But when the progressbar hits 100% it just turns of again. When i turn it on again, same thing happens.
Its only 1 week old, and nothing else has been bad with it.

You have 14 days from date of purchase to return the machine and exchange it for another. Unless you want to jump through some hoops to try to 'fix' what's wrong with your unit?
Try booting into your Recovery partition (hold down the command and R keys whilst booting) and use Disk Utility to verify and, if needed, repair your hard drive. I don't know that this will help - you may be stuck in some sort of infinite loop - but it's worth a try.
Clinton

I am trying to dowload pictures onto my macbook pro, but it wont read the USB adapter were all the photos are on?

Hey guys i got a macbook pro and this is the first incident that has happended to me sence i got it i cant figure out why it wont let me download pictures off my usb adapter it wont read it? help

So from your description, the drive isn't mounting on the desktop?
Open Disk Utility (Applications > Utilities), and see if the drive appears in the left pane. If it does, but it's greyed out, highlight it and wait for a few seconds - eventually the Mount button should become live - click it and see if that clears the problem.
If not, it's possible that the drive has been damaged, usually by removing it without unmounting (ejecting) it first.
If you have access to a Windows machine, it may be possible to mount it on there, eject it properly and try again on the Mac. This has been known to work reasonably frequently.

New MAC Mini w/OSX Lion - will not boot from USB or external optical drive when attempting to use BootCamp to install Windows 7?

The University recently purchased 6 brand new MAC minis for deployment in classrooms I support. I am attempting to create a dualk--boot environment comparable to our existing computer systems, only these machines wil be running MAC OS X Lion and Windows 7. After following the procedures outlined in the BootCamp on-screen prompts, and attempting a few techniques I found in the tech support user-base, I am still unable to get the MAC mini to boot up from the USB flash drive, or from an external optical drive, so that I can complete the installation of Windows 7. When using the Boot option key at start-up, all devices are displayed suggesting that they are being properly recognized, however the computer boots to a black screen with an error message indicating that "No bootable devices are found - press any key to continue." I am able to boot into the computer's internal drive, but not from any external devices. I fully expected that the semi-automated BootCamp procedure properly prepares the USB device for booting, and for installing the Windows 7 OS.

Meh, with the price they take for a drive in Denmark, I don't think it's worth it... They take around 160 $ for the drive (that's the cheapest MacBook drive I could find), and I am not even sure that's the one I need.

Booting from USB-powered External Optical Drive

Hey all,
I am looking to update my unibody MacBook as follows - I am swapping out my internal SuperDrive to replace it with an OWC Data Doubler bracket & Intel SSD. The Intel SSD will eventually be for the OS and apps and my original HDD will be for media.
It looks like there may be an Intel SSD firmware update I'll need to install and to do so I need to burn the firmware ISO image to a CD-R then boot from it to carry out the update. Since I'll have removed the internal SuperDrive I'll be getting an external optical drive for this and all future CD-related tasks.
So the question is, will I be able to boot from a CD in an external USB-connected optical drive? Will any possible limitation be the MacBook's fault or the external optical drive's fault?
Any other way around this if I can't boot from the external drive? I wanted to go the USB flash-drive route, but the Intel site (http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18363&lang=eng) says a CD-R is specifically needed, or do they always say that? I know I've booted the Mac OS X installation disc from a flash drive before...
Thanks so much.
Message was edited by: lauber1322
Message was edited by: lauber1322

You should not have a problem booting from an external USB drive (the MacBook Air does this, for example). My recommendation is to buy an external drive from Amazon and try it. They don't have a restocking fee so you can return it if your plan doesn't pan out.
As far as installing the firmware to the intel drive, is it possible to install the SSD in the regular hard drive slot first before replacing the optical drive and running the update that way? (I don't know much about SSDs, sorry). Once the firmware itself is updated, then you could put it in the optical slot like you wanted.

Boot Camp: Macbook Pro 8,2 wont boot from USB or External CD Drive

Similar Messages

Maybe you are looking for