Boot Camp not available on a G4 PowerPC???

I have a G4 PowerPC. I successfully installed leopard, but cannot find boot camp assistant. I tried searching for it the way they recommend for the macbooks that are missing it. I then linked to my other computer that has it and tried opening it. It says that my computer does not support boot camp. Does anyone know why or how I can get around this?

Boot Camp was created as a mechanism to facilitate the installation of Windows, which is compiled for an Intel processor, on an Intel Mac. Windows cannot run on a PowerPC Mac outside of an emulator, and therefore a standalone solution such as Boot Camp won't work. Boot Camp is not an emulator.
A hard disk must be in the GUID partition format to be repartitioned by Boot Camp, and PowerPC Macs can only start up from APM drives.
(28187)

Similar Messages

Boot camp not opening

I've got a early 2011 Macbook Pro 17 inch. I downloaded the latest support software and installed it. All of the drivers are functioning properly when I'm running windows, however when I open the bootcamp assist within windows to customise settings nothing happens. I downloaded the drivers from osx bootcamp and then tried downloading the correct support software again from Apple and still nothing. Any suggestions?

david11717 wrote:
Well, my problem is that when I try using the boot camp assistant and try to download the "Windows Support Software" it says "Download could not continue. The Windows support software is not available." I read around the forums and saw that you can install Windows 7 x64 anyway but then put in the original discs that came with the laptop to install boot camp. The problem with that is that I don't have those discs. Is there a fix to get the boot camp assistant to download the Windows support software?
You didn't mention what version of OSX you have but ... if Lion you can download them using Boot Camp assistant, if Snow Leopard you can obtain a replacement disc from Apple (you'll need the serial number of your Mac), buy a retail copy of Snow Leopard ($29) or download them using Boot Camp Assistant.

Blue tooth on win 7 boot camp not working.

I'm running Win 7 ultimate on a mac book pro purchased a couple of months ago.
after many different attempts and rough hours shouting to the heavens the hate i feel for this demonic device i managed to have to running Win.
I can deal with extreme penalties of becoming an apple customer in terms of no HDD common access from both Os`s, keyboard and track pad non responses etc... i can figure out for the life of me why cant i make the blue tooth devices pair !? maybe i got spoiled using a dell notebook for many years and i'm used to things working for the way i want them to and its a different package i should have bought from apple (aside for care and shmare )
Anybody feels like giving a hand here ?

When you completely uninstall all video drivers Windows will fall back to a very basic (it's like it's 1995!) video driver. As the thread starter says 800x600 is the resolution.
So this morning I did fully uninstall all drivers and got the 800x600 in the center of the screen and rebooted with the stretched 800x600. Once I logged in Windows did install a driver (ATI Mobility HD 4850 (Microsoft Corporation WDDM1.1)) I forget the version of it though. Anyway it was buggy (I think but it was not band-y ). So I ran the boot camp 3.1 update. When I rebooted everything looked great.
My driver version though 8.641.1.0 (8/24/2009)! So now I'm older then 8.661 BUT no banding and no constant crashing. I did get the split screen issue where the top is on the bottom and the bottom is up top. This was at the login screen though and once I logged in my desk top was ok. My card is also identified as ATI Radeon HD 4850, I thought it was the mobility version though.
And that was not as simple as I wrote.. There were MANY rollbacks and uninstalls and trying to manually pick the driver to install. Even got the black screen at one point and had to boot to command line to delete that ATI file. So maybe set aside an hour or two...
STO played fine as well!
Now to rock the boat and see if Windows wants to update me...
Message was edited by: Jason Mcclary

Option Key for Boot Camp not working with New iMac Keyboard

Hi, I own a early 2006 Intel iMac. Recently, my wife complained that the keyboard was getting dirty. Basically I think she liked the new keyboard on the new Aluminum iMac better. We purchased it back in August and everything worked great. Oh I also had the beta version of Boot Camp installed. Everything worked great, hold Option down on boot and could choose which OS to go into.
Fast forward to now, purchased Leopard and love it! Decided to wipe the system and do a fresh install. Everything is installed (Leopard, Boot Camp, Windows XP) and working great, that is except when I press and hold the Option key at start up. If I have the new keyboard installed, the Option key does not bring up the boot manager. However if I plug the original keyboard in and hold Option, it works!!!
Ok I could see a problem if the new keyboard was NOT an Apple product. But it is and frustraiting as I can use the control panel to choose. This is a long round about method and does not make a happy wife with me. HELP!
Jhan Jensen

Thanks for the info! I was about to call myself and I may still do so. I am hoping if Apple gets enough of these calls then maybe it will spur them on to get it done sooner. (Apple are you listening) I will do the same with the KB swapping, she will be happy at least she can still use the new keyboard. She types a lot and has be really happy with the new keyboard and its response.
Thanks again for the help!!!
Jhan

Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?

I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Boot Camp not able to download Windows 7 Install Disk

I am trying to install Windows 8 on my 2011 Mac Mini. I have a Windows 8 disk, 8GB bootable USB drive, and am trying to download from Boot Camp: 1) a Windows 7 install disk, 2) latest Windows support from Apple, all to install 3) the Windows 8 OS on my yet to be partitioned hard drive.
It goes about about 20% into the process and stops with this error message: " Your bootable USB drive could not be created".
What am I doing wrong or missing?
Thanks much for any gudiacne or suggestions.
arturo0903

The Boot Camp help guides are here: http://www.apple.com/support/bootcamp/
The Boot Camp forum is here: https://discussions.apple.com/community/windows_software/boot_camp

Boot Camp not able to install Windows 7 Ultimate 64 Bit!!???

Guys I'm using Mac OS X Lion 10.7.2 & I'm having a problem installing Windows 7 Ultimate 64 Bit through boot camp. When I insert the windows installation disc it creates the partition but as soon as it restarts to proceed the installation, it hangs up there saying 'No Bootable Device. Please Insert Installation Disc and press any key to continue'. But when i was previously using Mac OS X Snow Leopard, I installed Windows 7 using the same disc and it proceeded without any issues. Can any body give me a solution to it please because I want Windows 7 in boot camp and I do not want to use it in any virtual machine like parallels desktop!!! I AM USING iMAC 2010 so its quite new!!!!!!

I am having the same problem. I have a very recent 27" iMac 3.4g i7 and I am trying to install Windows 7 64bit upgrade.Also running OSX 10.7.2. It also stalls out after expending files reporting that there are missing files with a error code 0x80070057. I was trying to install a fresh complete version but had bought the upgrade.. I had vista on another machine but had taken it off and was going to use the key for the upgrade. No windows had as of yet been installed. I later tried to install Vista as a way to upgrade to Win7,which went ok, but when I tried to upgrade to Win 7 64bit, I couldn't. I have tried this multiple times without success and have removed the boot camp partition after each failed attempt... Any Suggestions?? Thanks in advance

Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."

I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
I also tried using rEFIt, but that didn't work out either.
Here are the specifications of my machine...
MacBook (Early 2009 model)
2.0 GHz Intel Core 2 Duo processor
4 GB of RAM
500 GB SATA hard drive
Dual-layer SuperDrive (defective, may replace it once I have the cash)
NVIDIA GeForce 9400M graphics chip
Mac OS X 10.7.2 Lion
Can anyone help me out with this? Is there some sort of workaround?

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

Boot Camp not recognizing disc

Alright, so it seems as though I have had problem after problem trying to setup my Windows 7 boot camp. Normally I don't actually create new posts but with this issue I have not been able to find any solid answer yet.
I have tried multiple times to burn my Windows 7 iso file. Each time I attempt to burn it on my Macbook, it says the burn was successful but then after putting the disc back in- it says it is blank. The discs I am attempting to use are CD-R. And yes- for every burn I have been doing, I have verified the disk. Each time it comes out successful- but nothing appears to be on the disc when I insert them into my MBP.
So I thought maybe it was the disk type so I searched my room to find a blank DVD-RW. Whenever I try to put it into my MBP- it idles with it and then spits it out. No errors or anything. So after all that I did more research and kept finding that maybe it was my disk drive. So I grabbed my Mother's laptop and attempted to burn the Windows 7 iso on her laptop. It completed successfully and when inserting the disk back into the laptop (my Mothers laptop) the files appear to be on the disc. So naturally I put the freshly burnt disk into my MBP and it appeared to be blank?
Out of curiosity I put all the disks that I attempted to burn inside my mothers laptop and each one had the boot files and everything all burnt on- so I am kind of at a stand still.
I am quickly running out of ideas to try with this. It seems that I am not able to use the iso file by itself in boot camp so does anyone have any ideas or suggestions?
And the reason I am having a hard time beleving that it is the disc drive- is that if I put in a CD with music on it, or put in a movie- it runs perfectly?
Thank you in advance.

Well I normally hate it when I search a problem and find someone who has the same exact problem- but they never posted an answer.
The solution to my problem was simple- it was the software I was using to burn my iso. I ended up using Roxio Toast Titanium to burn the iso and it worked like a charm.

Boot camp not working

Hello,
I'm trying to get windows 7 ultimate 64 on my mac book pro. However every time I try and run bootcamp it tells me I need to update, when I update it says everything is all good....
I'm running Version 3.0.4 (322) of bootcamp
Thanks

Sry m8 but I've checked that way before I wrote my solution.
Permissions disk checked - done! - didn't help
Disk check - done! - didn't help
PRAM reset - done! - didn't help
Disk journaling - confirmed!
Software update (from Apple menu or from System Preferences) - done! - didn't help
Combo update (10.6.6) - done! - didn't help
Everything what I have tried before was just wasting my time. And I have check your solution as well. Unfortunately with same result - Boot Camp Assistant is not working.
In this case my workaround is only way to install Win7, Vista or Linuks on different partition. Not sure about WinXP, need to be checked.
What's interesting, I contacted the Apple Care, and after lots emails and phones they got only one solution - send me new OS X SL installation disk.
Message was edited by: TB@Doo

Boot Camp not installed after transfer from PB G4

I just bought a MacBook (Black, 160 G HD, 2G RAM). When starting the new MacBook, I transferred my files from my old PB G4 to my new MacBook. All my files were transferred without any problem. But Boot Camp Assistant is no where to be found on the new MacBook. Search with Spotlight does not find Boot Camp. Any suggestions??

I realized that Bluetooth was not installed either. There might also have been other missing software that I did not notice.
I did an "Archive and Install" from the original Installation DVD, and everything seems to be installed and working well.

Windows 8.1 wireless network on boot camp not working

I just completed Windows 8.1 installation with USB fixes on a new MB Air. I cannot get the wireless in Windows to recognize any wireless networks. I have Mavericks which may be the problem.
Any help is appreciated....Thank you-
T

Apple does not respond in these forums except occasionally an Apple employee will stop by. If you want to contact Apple, use the contact us link at the bottom of this page.
With respect to your question "When will Windows 8.1 be supported on Boot camp 5?" you are asking us to speculate as to when Apple will release their drivers supporting Windows 8.1. We do not know, and we can not speculate as to when. From the terms of use of this forum:
"Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products."
The planned dates of production or release of Windows 8.1 drivers are speculation about the drivers.
With respect to your other question, "Do I return the Windows version and try to download 8.0, or wait it out until it is supported? New to Mac's.". I answered you.

Boot Camp not showing anymore as a Startup Disk option?

For months, my internal 1TB had been partitioned 750GB/250GB OS X 10.6/Windows 7, with no problems - I want to use Windows, I either reboot and hold Alt, then choose Windows when the menu comes up, or I go System Preferences > Startup Disk and change it to "Boot Camp".
A few days ago I shrank the 10.6 partition by 200GB using Disk Utility, then formatted the space as Mac OS Extended and installed the preview of OS X 10.7 Lion (I was invited to try it via the AppleSeed programme).
Since then, the only options I have in System Prefs > Startup Disk or when holding Alt during boot are 10.6 and 10.7 - Boot Camp seems to have vanished as a choice. If I open Disk Utility, Boot Camp is still there, still 250GB. If I browse the Boot Camp partition in OS X I can see all my Windows files, etc, it just seems to be gone as a bootable option
Help!

I have the same problem... Can do WinClone, not supported on Lion, to get an image backup of W7 partition. At this point, since I can get to all the data on that partition, I would be more than happy to do an image backup of it, reinstall Windows 7 to get the boot partition to work, then reimage back to that original W7 partition so that I wouldn't have to reinstall and reconfigure all my applications.
My data is:
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640    253309143 Mac OS X HFS+
3      253309144    254578687 Mac OS X Boot
4      254578688    977104895 Basic Data
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1       409639 ee EFI Protective
2         409640    253309143 af Mac OS X HFS+
3      253309144    254578687 ab Mac OS X Boot
4      254578688    977104895 07 NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 253309144:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot
Partition at LBA 254578688:
Boot Code: Windows BOOTMGR (Vista)
File System: NTFS
Listed in GPT as partition 4, type Basic Data
Listed in MBR as partition 4, type 07 NTFS/HPFS

Boot camp not working in windows installer

When I install windows 7 I get to the select partition section. I get a message after selecting the right one saying "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." Not sure what to do from here. Anyone have advice?

Boot camp assistant, delete/remove windows
Restart machine and do a pram reset
Open disk utility, repair permissions twice and confirm that you only have 1 partition on your drive
Restart bca, check all 3 items (create, DL, install)
Report back

Boot Camp Not Working From Windows Control Panel

Hi,
When I click on the 'Boot Camp' icon in the Windows Control Panel I get the usual warning from UAC. When I select 'Allow' I get an error message along the lines that "I don't have permission to access the startup disk" & the app will not run.
I have tried running it as administrator but the result is the same.
Does anyone know how to rectify this so that I can get this utility working correctly again?
Thanks

On the disk Management I tried to set the disk with the OSX partition as active and restarted, and ended up having Missing Operating System error.
Fortunately I managed to solve that problem but still I am unable to switch back to Mac.
Help is needed and much appreciated

Boot Camp not available on a G4 PowerPC???

Similar Messages

Maybe you are looking for