Boot camp not showing ''Create a Windows 7 install disk''

So i am trying install windows 7 64 bit version on my 2008 macbook pro and i dont know if this is the problem or not, it doesnt show ''Create a Windows 7 install disk''.
The other thing that i have not made clear is, when doing a windows 7 cd, do i need to burn ISO file on DVD or should i open it and burn all the files inside the iso image, to the disk?
Is there any specific ways or versions of Windows 7 for bootcamp or i can dowload any tipe of windows 7, put it on cd and use it as a bootable CD?
P.S.: I already had windows 7 ultimate 64 bit installed on the macbook. I installed it from my friends copy of Windows 7 Ultimate and i cant find that CD anymore, so when i tried to do a new copy of windows on CD and do the bootcamp it didnt recognize it, like there was no installation disk. That means i should make a bootable CD with windows 7 files on it or what?
Thanks for help.

The Boot Camp help guides are here: http://www.apple.com/support/bootcamp/
The Boot Camp forum is here: https://discussions.apple.com/community/windows_software/boot_camp

Similar Messages

Boot Camp not able to download Windows 7 Install Disk

I am trying to install Windows 8 on my 2011 Mac Mini. I have a Windows 8 disk, 8GB bootable USB drive, and am trying to download from Boot Camp: 1) a Windows 7 install disk, 2) latest Windows support from Apple, all to install 3) the Windows 8 OS on my yet to be partitioned hard drive.
It goes about about 20% into the process and stops with this error message: " Your bootable USB drive could not be created".
What am I doing wrong or missing?
Thanks much for any gudiacne or suggestions.
arturo0903

The Boot Camp help guides are here: http://www.apple.com/support/bootcamp/
The Boot Camp forum is here: https://discussions.apple.com/community/windows_software/boot_camp

2008 MacBook Boot Camp Assistant doesn't recognize Windows XP install disk

I'm trying to install Boot Camp, so I put in my Windows XP installation disk, which the computer recognizes because it shows up on the desktop, but when I run the Boot Camp Assistant, it says "The installer disk could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized."
Any help?

shelleykapowski wrote:
I'm trying to install Boot Camp, so I put in my Windows XP installation disk, which the computer recognizes because it shows up on the desktop, but when I run the Boot Camp Assistant, it says "The installer disk could not be found. Insert your Windows installer disc and wait a few seconds for the disc to be recognized."
Any help?
That the disk is recognized in Leopard does not mean it's the right disk.
The Windows disk must be XP w/SP2 embedded, or Vista.
It must also be a full install disk, not an update or restore disk, and not a ISO-image disk.

How to "Create a Windows 7 install disk" on Mountian Lion w/Bootcamp 5

It's basically the same way you create one with previous Bootcamp & OS verisons.
Finder -> Applications -> Utilities -> Select Bootcamp -> Show Package Contents
Open "Info.plist"
Scroll until you see whats listed below.
<key>PreUSBBootSupportedModels</key>
          <array>
                    <string>MacBook7,1</string>
                    <string>MacBookAir3,2</string>
                    <string>MacBookPro8,3</string>
                    <string>MacPro5,1</string>
                    <string>Macmini4,1</string>
                    <string>iMac12,2</string>
                    <string>iMac11,2</string>
          </array>
Remove the "Pre" in "PreUSBBootSupportedModels"
Then it will ask if you want to make a copy of the file, click yes.
Now in the new "plist" file cut out "MacBook7,1" in the top line and replace with your Model Identifier (Can be found in "System Information" under "Hardware Overview")
Save this file as "Info.plist"
After save the old "Info.plist" file as "Old.Info.plist" and move to the trash can (May as for log in info to do so)
Then after that file is in the trash move the NEW "Info.plist" (The one you edited) to the Bootcamp Content folder in place of the other one.
If everything is done right you should now be able to "select/disselect" the "Create a Windows 7 install disk" in bootcamp.
You're welcome,
Avery

I recently bought my Mac MIni 2010 Model, yes i know, 2010 Model?! But that's what i can afford for now since i already have an Apple Cinema display, an Apple Wireless keyboard and a Magic Mouse.
When i tried opening the Boot camp assistant, since my Mac has an optical drive, only two options were shown and the "Create Windows USB install disk" option wasn't there at all.
So i searched the net for help and i found only one that answers my query (http://forums.atomicmpc.com.au/index.php?showtopic=51873), however, after following the tutorial, it didn't work and my Boot Camp assistant ended up crashing (quit unexpectedly). So i reverted the process and my Boot camp assistant went back, up and running but still no third option.
So disappointed, i went back to the "info.plist" that i was working on (using Xcode) and tried to mess around with the contents.
Then after over an hour of trial and error, i decided to just revert the changes that i did and quit. As i was clicking on the , and because i was a noob, i deleted by mistake the entire array of strings containing "Boot ROM Versions" that allows some mac models to boot windows using usb and when i click cmd+z, it just won't undo it.
So i guess, i was screwd! So nervous that i thought i killed the app, i closed the "info.plist" and checked if the Boot Camp assistant would still launch.
To my surprise, it actually opened! And to my astonishment, it even shows the third option! I guess, no one has ever did this, as we speak!
So you can call me an Accidental Hacker LOL! To all of you who understands fully the function of "info.plist" - any thoughts?
Mac Mini Mid 2010
OS X Version 10.8.3 Mountain Lion
2.4 Ghz Intel Core 2 Duo
2 GB 1067 Mhz DDR3

Why can't a choose to create a Windows 7 install disk on my 2010 macbook air?

It is a 2010 macbook air, with lion 10.7.2 and bootcamp 4.0.1. the option to create a windows 7 install disk is greyed out, i have a trial version from microsoft website, but i also have a downloaded windows 7 both of them are .iso, i also have a 4gb usb in. could someone explain to me how to fix this?

You might follow this procedure...
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Note that to start the procedure, you will need a Windows computer to create the USB install stick.
I have an iMac with Windows 7 running via BootCamp, but I really don't like the BootCamp setup mainly because it's necessary to reboot the computer every time you switch from one OS to the other.
A few days ago I got a new MBA 128GB model which I decided to put Windows on via Parallels. I have an old stand-alone DVD drive I plugged into the MacAir which immediately recognized the DVD drive. I then installed Parallels on the MacAir. When that was finished, it prompted me for a Windows installation disk, which I then put in the DVD drive.
Away it went with very little requests for inputs from me. In a short time, I had Windows 7 up and running. So far it looks like a great setup. With a few other programs, the MacAir reports that it still has 88GB free out of the 128 GB SSD.

Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?

I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Boot Camp can't create a Windows partition

Hello,
I'm trying to create a new partition to install Windows 7 on, but I am unable to do so.
At first I tried to do this with Boot Camp Assistant, but it didn't work.
Then I tried to create a FAT partition with Disk Utility, which didn't work either.
So I verified and repaired the disk, tried to create the partition again, yet it still didn't work.
I verified and repaired the disk and tried to create the partition while running the OS, in Safe Mode and from the Mac OSX Install DVD.
Neither of them worked.
I noticed while running the OS, the info of the HD said the capacity is 749.81 GB, while checking that from the Mac OSX Install DVD it only says about 700 GB (I mentioned 698.6 GB).
Strange..
It might also be important to mention that I recently (2 days ago) I installed a new HD: Western Digital Scorpio Black 750 GB, and today I swapped my 2x 2GB RAM for 2x 4GB RAM (Samsung).
On my previous HD, the Fujitsu 250GB, this proces was no problem at all. I installed W7 on that drive just a week ago.
I made a clone of the Fujitsu HD and "back-upped" it to my new WD HD. The W7 partition on the Fujitsu HD was 50GB, which is the difference in capacity mentioned above. I'm not sure if there's a link here..
I've got a MacBook Pro from mid 2009.
I'm not sure what to do next... I'm stuck!
Any help is greatly appreciated!

Did you do an upgrade to Leopard? If so, some files may be scattered over your HD, making it impossible for BC to find a single contiguous area on the drive.
Also, be sure you did not have eDisk installed - that's the thing from the TechTools disk that comes with AppleCare.
This is not an uncommon problem. It's not just you.
If you have a complete backup of Leopard, you can use the DU to make a single partition. You may be lucky and not lose any data, but backup anwyay.
In DU, repair the disk, if necessary and verify/repair permissions.
Once you have done this try again.
If BC still fails, you will need to erase the HD and then copy everything back from the backup.
I always suggest a bootable clone for the backup and be sure to test it first to see it works.

Boot Camp not showing anymore as a Startup Disk option?

For months, my internal 1TB had been partitioned 750GB/250GB OS X 10.6/Windows 7, with no problems - I want to use Windows, I either reboot and hold Alt, then choose Windows when the menu comes up, or I go System Preferences > Startup Disk and change it to "Boot Camp".
A few days ago I shrank the 10.6 partition by 200GB using Disk Utility, then formatted the space as Mac OS Extended and installed the preview of OS X 10.7 Lion (I was invited to try it via the AppleSeed programme).
Since then, the only options I have in System Prefs > Startup Disk or when holding Alt during boot are 10.6 and 10.7 - Boot Camp seems to have vanished as a choice. If I open Disk Utility, Boot Camp is still there, still 250GB. If I browse the Boot Camp partition in OS X I can see all my Windows files, etc, it just seems to be gone as a bootable option
Help!

I have the same problem... Can do WinClone, not supported on Lion, to get an image backup of W7 partition. At this point, since I can get to all the data on that partition, I would be more than happy to do an image backup of it, reinstall Windows 7 to get the boot partition to work, then reimage back to that original W7 partition so that I wouldn't have to reinstall and reconfigure all my applications.
My data is:
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640    253309143 Mac OS X HFS+
3      253309144    254578687 Mac OS X Boot
4      254578688    977104895 Basic Data
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1       409639 ee EFI Protective
2         409640    253309143 af Mac OS X HFS+
3      253309144    254578687 ab Mac OS X Boot
4      254578688    977104895 07 NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 253309144:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot
Partition at LBA 254578688:
Boot Code: Windows BOOTMGR (Vista)
File System: NTFS
Listed in GPT as partition 4, type Basic Data
Listed in MBR as partition 4, type 07 NTFS/HPFS

Hard disk partition not showing up during window 7 install

STOP - 0x00000116 error . I
want to install fresh OS from usb stick but the hard disk partition is not showing up. Only USB stick is getting detected.
Please help .. I have an interview and I need to fix this issue asap.

Hi there,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your hard drive is not showing up, presumably as a bootable partition. I am happy to help, but I need a bit more clarification of your problem. You mention a 0x00000116 error as well, which is normally part of a Blue Screen of Death. Does this happen regularly as well, or is that the real complaint, that you are getting the 0x code and a BLue Screen on startup?
That particular code is generally associated with a video driver problem.
Is the hard drive you are trying to install to, a new replacement hard drive or the original hard drive?
If you try to boot up the system, what error do you see?
Are there any repeating flashing LED patterns, or beeping patterns?
Assuming this is your original installed hard drive, did you try the recovery manager for the drive?
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Let me know, so I can better target my help to your situation.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Can the boot camp partition be resized once windows is installed and running as virtual machine using vm fusion ware?

I have macbook air partitioned 505/50 and running OSX and win 7 side by side as virtual machines using vm fusion. Can the partition size be changed without starting over?

Very helpful. I started with vm ware to create a pseudo drive but could not import win 7 over home network. mac has no immediate way to connect to network without adapter, and has no cdrom. So i used boot camp to create partition, then made a bootable win7 iso file on a memory stick using win 7 usb/cdrom download tool from microsoft, and rEFIT to get mac to boot from the mem stick into the dos partition. Then i ran vm fusion to import the win 7 partition as a virtual machine. OSx and win 7 run side by side.
Seems from what you say that sizing cannot be accomplished without deleting partition and starting over. If I start over and just run vm fusion to create he win7 virtual machine, not sure how I would bet the minimum win 7 os into the ac. Perhaps vm will boot from the mem stick using refit. Do you know?

HT4407 No boot camp drivers for 64-bit Windows 7 installed

Dear Family,
I'm unable to download the Window Support on the boot camp assistant.
I installed the 64-bit version of Windows 7 on my 15" Mac of 2010 model running on Lion n the Windows have no wifi so i guess the drivers are needed.
Returning back to Boot camp assistant to download the latest support from Windows but
It keep prompting:
"Can't install Windows Support Software because you are not connected to the Internet."
When my wifi is on and even if i'm on ethernet.
Is there anywhere i can directly download the bootcam, i suppose its 4.0 or 4.1
cant find any link.
Need you folks to help me out.
Without the Windows, i cant have my access and my assignment requires Access. N even the Business edition of MS Office Mac 2011 aint hv got Access.
Thanks so much!
Kryz

Obviously you are and can connect to the net.
The error message and problem is quite well 'documented' by other threads and the fault lies with Boot Camp Assistant's configuration.
Try turning off auto proxy in OS X network control panel and play around wtih that.

Boot camp assistant stuck while 'Copying Windows files...'

At the moment I am trying to install Windows 7 Ultimate 64 bit using Boot Camp 4.0.1. I have the iso and i'm at the step where Boot Camp Assistant creates a Windows 7 install disk on a USB flash drive. It gets most of the way through the process and stops here, http://imgur.com/Kcxl9 everytime. What can I about this?

Creating DVD on USB
Not all USB devices work
Disk Utility we know is not well suited to burning ISOs
I would assume the flash drive could be a 'maybe' and it would need to have Master Boot Record partition table.
I take it the Mini is like the Air in not having a superdrive, and that Assistant provided a driver to support USB-DVD function?
https://discussions.apple.com/thread/3000991
https://discussions.apple.com/message/17675647
https://discussions.apple.com/thread/3756763?tstart=0
There is a Mac OS X program for burning an ISO that should work too.
https://discussions.apple.com/thread/3754624
SimplyBurns (Mac) - Download

Windows Vista install disk for my Mac?

I have just installed Windows vista onto my Mac but when using boot camp it only gives me the option of creating a Windows 7 install disk. Does anybody know where I can get a Windows Vista install disk? Thanks

No doubt if you Google for it you will find vendors. Check with amazon.com, too.

"Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation."

I try to install windows7 system on my macbook air, which version is 10.8.5. When I open the bootcamp, it let me to choose a windows ISO image, which I've already downloaded from this website: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325 /, it also asked me to select a USB drive, which is kingston that has 8GB. Then when I clicked "continue", it said that "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation." But actually the ISO image I downloaded is 64-bit windows7. I don't know why this would happen. Could someone help me please!!

Thanks for your feedbakc Kiranjj!
I identified the reason to be that the W8 installation file didn't download completely from a Mac OS-device. I downloaded from another Win-device and the moved the installation file with a USB-stick and then everything worked diectly! But thanks anyway.

Boot Camp Partition shows up Smaller in Windows 7 Setup

I just installed a new Seagate 1TB hybrid drive (STBD1000400) in my mid-2009 15" MacBook Pro 2.66 GHz Core 2 Duo, 8 GB of RAM, with OS X 10.9.2 and Boot Camp (and all other Software up to date). Everything went fine with the installation of the new Drive and is showing up as 1TB in the system in OS X.
When I go to setup my partition in Boot Camp I set it so OSX has 600GB and Boot Camp has 400GB. After it completes the partition it automatically goes into installing Windows 7 64-bit Home Premium. But when I go to pick which partition to install it on, the 400GB Boot Camp partition I created only shows up as 372GB, not 400GB. And I can see my 600GB partition in the list only showing up around 540GB. After the Windows 7 install it still shows the drive as 372GB.
After the install and started back up in OS X and I checked the drive and it shows them correctly as 600GB and 400GB. So restarted back in Windows 7 and it still shows the Boot Camp partition as 372GB instead of 400. I even went into Disk Management and it doesn't show any unpartitioned drive space available either.
So I started back up in OS X and deleted the Boot Camp partition and started over trying to go with the 600 and 400GB partitions, but it still shows the 400GB partition as only 372GB again during the Windows 7 setup.
Anyone know what can be causing Windows 7 64-bit Home Premium to not recognize the full 400GB partition?
Anyone ever come across a similar problem?
Thank you in advance for any help or suggestions offered.
Thank you,
Nick

Capacity of the drive or size of the volume. In windows 7 it says 931.32GB. Rebooting into Mavericks, DU shows the volume as
1,000,204,886,016 Bytes
So....at least one of them must be wrong I would consider Windows 7 using some 1024 based number and the mac showing raw bytes. I bet all your space is accounted for.

Boot camp not showing ''Create a Windows 7 install disk''

Similar Messages

Maybe you are looking for