Boot Camp Partition Failed

So I tried to partition my hard drive and I got the following error message:
+Verification failed. This disk could not be partitioned.+
+Use Disk Utility to repair this disk.+
And so I continue on to Disk Utility and I try to verify the disk and I get the following error message:
+Invalid volume file count:+
+(It should be 679211 instead of 679214)+
+Invalid volume directory count:+
+(It should be 170328 instead of 170325)+
+The volume Macintosh HD needs to be repaired.+
+Error: Filesystem verify or repair failed.+
At the top of Disk Utility it says if repair disk is unavailable, boot from Mac OS X cd and use disk utility from there and repair. But when I do that I get the following error message:
+The disk "Macintosh HD" could not be unmounted.+
I used to have my HD partitioned with Windows XP installed on it, but when I tried to use parallels as well, the partition got messed up and so I deleted it. I am trying to reinstall windows but to no avail. I know it is a long read, but please help me out! Thanks!
Message was edited by: dopey080

If you removed the Windows BootCamp partition thru BootCamp Assistant, it should have been fine.
At this point, your only real option is to update your backup drive, then boot from a USB drive or DVD, and reformat the internal drive back to one partition.
Paragon sells Drive Backup 9 Pro that works with GPT and BootCamp and can facilitate moving Windows to/from a VM (like Parallels) as well as backup for Windows and partitioning tools.
Apple Disk Utility First Aid is a "start" but you often find it comes up short and you need more robust tool like Alsoft Disk Warrior.
I would never be without bootable backups, along with TimeMachine as secondary backup. But Disk Utility can restore a drive to/from USB/FireWire drives, or there is SuperDuper, or Carbon Copy Cloner to get you there.

Similar Messages

After using VMware once, boot camp partition fails to start up

Start up repair also failed.
I just installed Windows 7 64-bit onto my brand new macbook pro using boot camp. Everything went fine, I installed the drivers and everything worked perfectly.
I then installed a couple games (Maplestory and L4D)
Neither of them worked.
I went back to Leopard and started up VMware Fusion just to mess around with Windows. Actually, all I did was re-install L4D. L4D started and worked. Surprised, I tried maplestory. It worked as well. Then I curiously restarted in windows. BSOD. Failed to start. Repair failed.
Someone shed some light?
EDIT: After restarting a couple more times Windows started. Neither of my games work though, only in VMware. Anyone know why?
Message was edited by: DxRania

Actually for me it worked perfectly under Vista Ultimate x64, and yes I do actually get an error it's error -2147467259 (unspecified error)
Compatibility mode does not work as the new "Hack Shield" prevents this....it thinks I wanna hack the game and just says maplestory will not start in compatibility mode.
Thanks for your reply by the way
EDIT: Forgot to say, all the drivers work fine. What bugs me though is that it works in VMware..
Message was edited by: DxRania
Message was edited by: DxRania

Boot Camp Partition Failed Now Storage Says 300GB Used as "Other!"

I have a Mac Book Pro 13" Mid 2011
I used a Windows 7 disk to install windows via boot camp, I start to make a partition. I left for about 10 minutes and the computer was restarting, so I go into disk utility to check if there was the "bootcamp" partition and there wasn't. I went into about > storage and under "other" it says 365GB used. I remember before doing the whole windows thing I had way more than 95GB left. (I split the GB to 250GB mac and 350GB windows) Please help me!

Last login: Wed Jan 22 16:15:53 on ttys000
Matthews-MacBook-Pro:~ matthewbobmontespants$ sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: PMBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 975093952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
975503592    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
976773128          7
976773135         32         Sec GPT table
976773167          1         Sec GPT header
Matthews-MacBook-Pro:~ matthewbobmontespants$

How can I get Lion to recognize my boot camp partition.

Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
Is there any way to get the boot camp partition to work?
I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

Copying a disk which has a boot camp partition

Colleague has an iMac with a boot camp partition, and the disk has failed. It won't boot off the mac partition, although the windows partition works fine. He bought a new 1T disk and we are trying to copy his disk on to it, and will then install the new disk into the iMac.
So it's booted up using the SnowLeopard install disk and I am running disk utility. First I tried to partition the disk into something that looks like the partition scheme on the current disk -- big partition for os x, little partition for windows, although big & little are 750GB vs 250GB as opposed to the smaller version on the 260GB original.
Then I tried to use the Restore to go from the old bootcamp partition to the new MS-DOS (fat) partition on the new drive. This failed. First it resized the fat partition down to an ever-so-slightly smaller partition than the NTFS original, and then generated an error because the partition is too small.
How do we do this?

Loner T wrote:
1. Do you have a TM backup of the OSX which came from this "failed" disk? It may just be a matter of reinstalling OSX too work around bacd blocks?
My boss tried that about a year ago, but it failed again after not too long.
2. What is the failure when switching to OSX from Windows?
Not sure. Now when I option-boot the machine I can't see either partition -- I can see the installer dvd and the new drive in its external enclosure.
3. Windows can be installed only on the internal disk, which is a Windows restriction that BC enforces. Apple allows OS to installed on external drives. Ask Gates/Ballmer/Nadella why?
4. Yes, you can get data of the disk, not matter how it is connected, internal or external. It is tricky to take a Volume and move it. Can I suggest an investment in Winclone to backup and restore (http://www.twocanoes.com/products/mac/winclone) Windows?
5. Yes, but I would recommend putting Bootcamp Windows back as BC/Windows, rather than virtualizing it using Parallels.
Well moving the new disk in to the iMac is one of the tasks we need to accomplish, so we can do it now. My plan was to use dd to move the data from the partition on the old drive to the partition on the new drive, once we can get Boot Camp Assistant to create it. Winclone looks like a great product, but it's $29. Parallels is only $79, and if a disk fails or you migrate to new hardware all of the Parallels vms come over effortlessly using Setup Assistant or Migration Assistant.

How can I get my Boot Camp partition off my old drive?

I swapped out the stock 160gb drive that came in my MacBook Pro since it was acting up. I installed a new drive and restored it with Time Machine, but now my Boot Camp partition is still on my old drive. I slipped my old drive into a usb sata enclosure and tried booting from it in hope I could back it up with Winclone. When I went into the startup disk selector the drive would not show up (but it sounded like it was trying to spin up). Earlier when I pulled the drive out of my MacBook Pro it was still functioning fine, so I do not think the drive has failed.
Any ideas on how I can get the Boot Camp partition off the old drive? Thanks for your help.
-Ryan

Some drives require more current to spin-up from a "cold start" than most USB ports put out, even if the port supplies. Additionally, if the drive is failing, it may require even more power for the startup.
I have a couple USB enclosures with external AC power that I keep around in case I run into drives like this. Failing that, I also have a couple of USB cables which use 2 ports to provide additional current. Also the cable length, and gauge makes a difference.

Activate Windows 7 in Boot Camp partition on iMac 27

Hy,
I have a problem with Windows activation.
My configuration:
iMac 27.4 GB Memory, dual processor, OS X Snow leopard, Windows 7 in a Boot Camp partition
I use Windows 7 in 2 ways:
by starting the machine in the Boot Camp partition (with 4 GB memory)
by opening a session VMWARE Fusion under Mac OS X (with 1 GB memory)
No problem (except: very slow with starting and black screen - problem discussed in the same forum)
My problem: how to activate Windows?
I activated Windows after starting via Boot Camp: no problem
But when I use Windows via VMWARE Fusion, I receive a message “you must activate this version of Windows 7 - there remain xx days” I understand that the hardware configuration is not the same one, but I use Windows 7 out of only one machine (but with 2 different hardware configuration), therefore nothing illegal.
How can I solve this problem?
Has somebody the same problem ?
Thank you in advance.

hart40 wrote:
Did this actually work? My understanding is that Windows 7 regards this as two separate installations and that it won't work?
I'm trying to find out if I have to chose between bootcamp or Fusion or if I can work with both.
You need to activate Windows 7 in BootCamp and in Fusion. Microsoft allows multiple free activations. If these are the only two activations for your copy of Windows, just follow the online activation process. It is quick and simple. If this process fails for some reason, call the automatic activation line. You'll be stepped through the activation by an automated attendant (robot). In the very unlikely event that the automated call activation fails, call and talk to a Microsoft activation person who will help you out.

Boot Camp partition won't mount in Disk Utility all of a sudden

I used to have a Windows 7 Boot Camp partition set-up and working perfectly.
Turned on my 2009 Mac Mini today and couldn't see it in the Finder. Opened Disk Utility, it was there, but grayed out. Right clicked and selected "Mount BOOTCAMP", got "mount failed"
Tried verifying and repairing disk, but no joy. So I removed the boot camp partition using Boot Camp Assistant and started again. Went fine, installed Windows 7 fine.
Booted back into Snow Leopard so I could unpair my bluetooth keyboard (I've found that I can only set-up the bluetooth keyboard in Windows 7 if I unpair it in OSX first). Again, Boot Camp partition doesn't show in the finder, and is grayed out in Disk Utility.
I googled this problem, and found a few people mentioning that NTFS drivers in OSX (e.g. MacFUSE, paragon etc) can cause issues because they conflict with Snow Leopard's own NTFS driver. I did have MacFUSE installed, so I removed it, but it didn't seem to change anything.
Any suggestions?

solution!
install NTFS-3G (http://macntfs-3g.blogspot.com/)
open disk utility and mount your greyed out partition (NTFS-3G will mount it)
unmount it
open system preferences, go to tuxera NTFS pref, second tab (Volumes)
make sure your windows 7 partition is selected from drop down menu then click "disable tuxera NTFS"
at this point i rebooted into windows, then rebooted back into snow leopard. my windows partition was once again mounted and visible in Finder
hope this works for you guys!
Message was edited by: colmiak

Boot Camp partition added to VMWare Fusion...can't see original partition

I originally installed Windows XP Pro using Boot Camp. The partition was available using the OPTION-startup to select that partition.
Then I installed VMWare Fusion and had it "use" that Boot Camp partition so I could access it while running Leopard. Now when I use the OPTION-startup I don't see the original Boot Camp partition.
I check the information on my internal hard drive and it shows a total of 290Gb available when the hard drive is actually 320Gb (30Gb for the Boot Camp partition).
I'm wondering my options:
A. Can I use a Windows XP disc to install another Boot Camp partition or will it deny me because there is one still detectable?
B. Can I restore the ability to see the apparent Boot Camp partition on the hard drive from the OPTION-startup screen?
C. Is the simplest solution to reinstall Leopard and then reinstall the Boot Camp partition?
Thanks for any help.

UPDATE: So I tried to reinstall Windows XP using the Boot Camp Assistant but after choosing to create a new 32 Gig partition, the Utility failed, said it could not be created and suggested I try running repairs on the disc using the Disk Utility.
After running the repair disk feature in the Disk Utility here's the results:
Verifying volume “XXXXXXXX”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 933882 instead of 933883)
Invalid volume directory count
(It should be 211965 instead of 211964)
The volume "XXXXXXXX" needs to be repaired.
Error: Filesystem verify or repair failed.
If anyone would like to expand on this that would be great.
Thanks again.

Ever transfer a Boot camp partition from one Mac to another?

My iMac has a working Windows 7 running on Boot Camp partition. I want to move it -- system and all, every last bit -- to my MacBook Pro. I installed Win 7 on the MacBook Pro and Windows said it would not authorize the system cause I installed it too many times. I'll have to move my copy of Mac Office 2010 also.
1) Is this possible?
2) Will it accept the copied files as an authorized copy of Windows 7?
Any suggestions, other than buying a new license?

You can use an imaging program like Ghost or Truimage. Windows will prompt for reactivation if it detects "too many changed devices." A different CPU and network card or motherboard chipset will usually be enough. Basically different motherboard means reactivation so more than likely both Windows and MSOffice will need reactivation since your MBP is a different motherboard than the iMac.
However, back to the activation thing. I'm assuming you're just trying the automated internet activation. If you've not been abusive and this is a legitimate reinstall, (i.e.: this is just the 2nd time reinstalling in the past year or two,) then just call Microsoft using the phone number you see when the reactivation fails. If they ask, tell them you bought a new computer or had to replace a hard drive. They will then give you the reactivation key to type in. I've done this with reinstalling various versions of Windows and MSOffice and calling Microsoft has always worked, of course taking a little longer to deal with the person on the phone versus clicking the mouse. Again, this assumes this is a legitimate "move" and you've not been reactivating every couple of weeks, which would look suspicious. I've never called in a "suspicious" instance so I don't know how Microsoft will deal with that. But otherwise it's relatively painless.

Can I recovery Lion with a Boot Camp partition?

Hello,
I have a MBP with Lion and Windows 7 on Boot Camp. I need to initialize the Lion partition and do a clean installation of the operating system for various reasons. Can I initialize the Lion partition with Disk Utility in the Recovery HD and re-install Lion without affecting Windows? Will it work correctly after this operation? Or I need to delete the Boot Camp partition first, and recreate it at the end of the whole process?

Yes, you can. Your Boot Camp partition is unaffected by installing or reinstalling OS X on a different partition.
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select Macintosh HD volume from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Boot camp often fails to boot - fix?

Boot Camp often fails to boot at all, leaving the iMac dead at the bootloader screen. Have to force shutdown by holding down power button. Full hardware test declared the hardware 100% functional. Disk Utility and chkdsk sees nothing but fire. This is intermitent/random and it proved impossible to "force" it's occurance. It happen when it darn well please?
First occurance goes back to late July 2011, a few days after a major thunder storm that caused pulsing power blackouts (as in, very short bursts - like turning off the power then immediately flipping it back on - too quick to actually shut the computer down). Surely, this must be the source of the issue? Right? Alas it doesn't adds up. Power supply of this house is very stable and reliable. Power fluctuations are unhearded of. It's also connected to a surge protected outlet. The system itself, in Mac or Win, is flat out stable. It does not freeze out of the blue like what a damaged power supply would cause. It only ever freeze upon choosing a partition via the boot camp interface.
Further observation as compared to normal boot procedure: Upon selection of the Windows partition, the LED on the USB mouse turns off then back on again a short moment later. Windows loads up normally. When the crash occurs, the LED never turn back on. It's just dead right there and then.
What's going on and what can I do to fix this? It feels like some hardware initialisation fails for some reasons. It's ough to be around the USB systems itself but what do I know anyway?
P.S.: Please, don't mention the dreaded format and re-install. It's a 20 hours job. I'm not going there. ty
Message was edited by: Virgule - changed a "foul" word

Why not upgrade the surge protector to a UPS? good units are very affordable.
Put all your sensitive equipment like modem/router, computer, electronics running off UPS.
CyberPower SINE 1000VA/600W $137
http://www.amazon.com/CyberPower-CP1000PFCLCD-1000VA-600W-Compatible/dp/B00429N1 92/
Well, sometimes if you don't have backups, and refuse to do what you may need to....
There are troubleshoolting tips and faqs I'm sure on the 'net.
Starting with Windows 7 DVD for one
Even OS X won't survive with forced (hard) shutdowns.
If it only happens in Windows, and you were running OS X when the outage occurred...
USB devices and cables can be hard to ID but swapping cables and stuff helps.
As for Disk Utility, it does not look at drive sectors or files for issues.
If you really want to scan a hard drive, use the vendor's own Linux or Windows utiilty to recertify the sectors.
If you haven't done any deep cleaning of files, registry, even uninstall and reinstall components.
I just did a reinstall. Partially to be a test run for when I have to install Windows 8 next week, also to clear up a problem I had, possibly a rogue web site using a rootkit to hide files and icons and programs disappeared and icons became generic. So yes I don't take it lightly, but the new install runs much much better (over two years since last install).
AHT is not a 100% reliable at finding everything, only what it actually is designed or suppose to look for.
A semi-loose DIMM or faulty can be enough, and not likely AHT or Memtest will find it, but Windows does tend to spot a problem with RAM during installs.
CCleaner 3.x
Driver Sweeper 3.x
START: run %TEMP% - Select All and send to Recycle
Lion Recovery - show all hidden partitions and check health of all, hidden debug menu in Disk Utility can be enabled in command line
Some partitions (GPT, EFI, System, Volume Information Block) are only tested during format where each sector does get a thorough check for errors because they can't be mapped out later. When you do chkdsk etc you only test user partition areas and not the 'entire' drive, unless doing a full initialization. And GPT requires that the VIB and also the backup VIB both be error free - in the past the backup VIB if it failed was "optional" though, it is not now.
If you clone OS X then it is easy to move it to another drive and also to do full initialization and restore. If 3 days of your time isn't an option maybe time to invest in program(s) and methods that can backup and restore.
Trying to find the needle in haystack that you have limped along with I guess since July (since installing Lion? maybe ?) can take 3 days probably, unless you are lucky enough to replace a mouse or cable on first step and it all goes away (hit the lottery or get hit by lightning odds)

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Boot Camp Partition Failed

Similar Messages

Maybe you are looking for