Boot Camp partition moved to external:"No bootable device found"

I have just installed a new SSD, moved my old OSX partition to the new drive and am currently using the old hdd in an enclosure as an external hard drive.
I can access all my files on my old OSX partition and my bootcamp partition when connected to my laptop. However, when i try to boot from my old bootcamp partition i get the "No bootable device found -- insert boot disk and press any key" message. That is when i boot from Startup Disk and target the bootcamp partion.
When restarting my computer with the external harddrive connected and pressing the option key i only get "SSD" and "Recovery" as options, it does not recognize the external harddrive as a startup option at all.
Is there anything i can do to use my old boot camp partition again? It worked perfectly fine before being external to the computer.
My computer is a 2011 mbp with Mavericks, my boot camp patition is installed with windows 7.

Microsoft requires that the partition for Windows be on an internal disk. It will not see an external drive as bootable.
Allan

Similar Messages

Theres a Boot Camp partition, but it's not bootable

Hi, so I made a boot camp partition and then my computer restarted, and opened the windows installer. Me being stupid, I realised that I had forgot to put some drivers onto my USB. So, I went back to OSX (by quitting out of the installer and pressing OPTION while booting up) to get those pesky files.
Then I went into System Preferences to boot of Boot Camp, and Lo Behold! No bootable Bootcamp. It only shows my original hard drive and my Windows CD.
I am using OSX Mavericks and a early 2010 MBP.
Proof of my partition:
Proof of no bootable partition:
Note: Same thing happens when I restart my computer while holding OPTION, not bootcamp.

first one setup the partition for bootcamp then one install windows on the partition
did you install windows from dvd or usb stick ?
if not then you will not be able to boot from the bootcamp partition as it would not have an operating system installed on it

Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."

I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
I also tried using rEFIt, but that didn't work out either.
Here are the specifications of my machine...
MacBook (Early 2009 model)
2.0 GHz Intel Core 2 Duo processor
4 GB of RAM
500 GB SATA hard drive
Dual-layer SuperDrive (defective, may replace it once I have the cash)
NVIDIA GeForce 9400M graphics chip
Mac OS X 10.7.2 Lion
Can anyone help me out with this? Is there some sort of workaround?

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

Paragon NTFS 11 not recognising Boot Camp partition or NTFS external hard drives!

Hi guys,
So i had Paragon NTFS activated and working fine back when i was on Lion. Aftering upgrading to OS X mavericks, it was still working fine and recognising my boot camp drive, and any other NTFS capable ex.hard drive. My Paragon NTFS version back then was 10.1.xx
When paragon released their official v11.1.263, which supported OS X Mavericks officialy, i thought i would upgrade and benefit from that support. Ever since i upgrade, paragon is installed, activated, but not showing any NTFS drives in the menu. All my NTFS drives are therefore read only, and i cant transfer anything.
Any idea how to solve this issue? Thanks

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Daily Backup for Boot Camp partition

I'm looking for a Windows software to perform daily incremental backups from my Boot Camp partition to an external USB drive. It should also be possible to restore the COMPLETE Boot Camp partition from that backup in case of a hard drive failure. (It's NOT necessary that various versions of files are kept around-the-clock like Time Machine does. It's also not necessary that the backup itself is bootable.)
I've tried Genie TimelIne, but unfortunately it wasn't able to manage a complete restore. The taskbar was missing, no applications were installed (only present), settings were missing after the restore..., so I had to manually install nearly everything.
I've heard "Macrium Reflect" should be better. Is this true or does anyone have another good tip?
BTW I'm not looking for a solution to backup from the Boot Camp partition to the OS X partition and I don't want to create a complete clone every day.
Thanks for your help!

coxorange wrote:
A bit difficult to test such a software including worst case recovery if you can't dispense with the concerned computer temporarily. And VERY time-consuming!! Hence I asked for personal experiences.
Well, Anyone elses personal experience won't mean much to you unless they have the same setup as you, so asking others for personal experience is as much of a crap shoot for you as doing it yourself. I went through lots of testing several years ago on my first MacBook Pro, but almost none of that testing is valid for my current machine. With the variations in machines, and machine configurations, what works for someone else might not work for you, and what might work for you might not work for someone else. I learned this when I was testing Colnexzilla as a possible backup/cloning tool. It worked fine on my MacBook Pro, but wouldn't work properly for a number of other users.
coxorange wrote:
What do you mean I'm confusing?
I always wrote about the Boot Camp partition.
I agree that what you are asking for seems rather confusing. You talk about backing up your data on your Windows partition, and you talk about performing incremental backups. The WIndows 7 Data backup utility it perfect for tasks like that. It's when you start wanting to perform disk image backups, and then ontop of that perform incremental image backups of your Windows partition that things get challenging and confusing. Since you aren't clear about what scheme you want to use, it is hard to answer with a "clear answer" and not get confused by what you seem to be asking.
coxorange wrote:
As far as I know that's not enough to perform incremental backups including EVERYTHING on the Boot Camp partition.
If you use the Windows 7 data backup and perform incremental backups, you will have a backiup of all your data from the Windows partition. Isn't that want you want? If you want to perform a restore, it will not restore you back to a bootable drive, but it will have all your data and files backed up. If you want to perform a partition backup image, and make those backups incremental nightly, it might be possible. Since you are talking about a Boot Camp partition on a Mac here, you also need to clarify if you want this backup to run when teh system is booted into Windows, or when teh system is runnign MacOS, or ifit is acceptable to boot from yet another media for the backup purposes.
At this time, I'm not sure that any software exists which can make backup image of your Boot Camp/Windows partition when runnign MacOS that will make a backup image that cna restore to a bootable volume and can do incremental backups. There are few, if any backup tools that will run runder native Windows on your Boot Camp partition that will make an image file backup that can do incremental backups, and also allow you to restore to a bootable partition. I beleive that the Paragon software is one of the very few that can do this. I have tried and successfully made backupns and restores from backup disk images using custom boot drives for CloneZilla, and the Paragon Drive Backup tool. I don't believe that CloneZilla will do inremental backups, and I'm not sure about the Paragon software as I stopped using Boot Camp about 1.5 years ago when I upgraded to my current MacBook Pro. Now with this system, I don't run native Windows, I only run it virtualized using Parallels Desktop and VMWare Fusion. For both of those, I get a full system backup with each MacOS backup I take, since the Windows File System is virtualized and stored entirely in files on my MacOS partition.

Windows will not boot to my boot camp partition on a DIY fusion drive - gives "No bootable device found" error

I have a MacBookPro 9,1 (mid-2012, non-retina) running OS X 10.8.2. Here is what I have done to my system:
Installed Windows 7 x64 Pro to a boot camp partition; installed all windows updates.
Using WinClone, save an image of this boot camp partition.
Removed optical drive and HDD.
Installed HDD in place of optical drive.
Installed SSD in place of HDD.
Booted to recovery partition, installed OS X on a flash drive.
Booted to flash drive, created fusion drive using [MacWorld's instructions](http://www.macworld.com/article/2014011/how-to-make-your-own-fusion-drive.html)
Booted to recovery partition on flash drive.
Restored system to fusion drive from a Time Machine backup. Unfortunately, it seems that because I never installed OS X on my fusion drive, I do not have a recovery partition. But that's an issue for another day.
Using Boot Camp assistant, created a boot camp partition on my HDD.
Using WinClone, restore my Windows installation from the previously created image.
Now, Windows boots to a black screen telling me that it can't find a bootable device. I have tried a few things to resolve this, all without effect:
I know that VMware Fusion has to prepare a boot camp partition in order to virtualize it, so I figured it might inadvertently fix things. Alas, while it *did* successfully boot my boot camp partition into a virtual machine, I still can't boot into Windows.
I figured I'd just try to reinstall Windows. Surprisingly, my system booted to my Windows install disc, which was in my original optical drive (which I had put in a USB case). But, Windows refused to install, giving me a an error 0x8030024. It seems the solution to this issue is to disconnect all drives but the one on which you want to install Windows, which is something I would dearly like to avoid. It would be a pain, but more than that, I'm afraid it would bork my fusion drive, even if I'm careful to never boot to OS X with the SSD disconnected.
A lot of places said that this error results from a borked MBR, and suggest using a tool like gptfdisk to rewrite it. I followed the instructions [here](https://discussions.apple.com/thread/4144252?start=0&tstart=0), but *that* didn't work either.
I am now completely at a loss as to how to proceed, and Google isn't much help either.
In conclusion, here is some information that you may find helpful:
    $ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         239.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         648.4 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                100.9 GB   disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Mayfly                 *884.0 GB   disk2
$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 63DC419F-1A09-4C5B-977A-F59F79502CA1
   =========================================================
   Name:         FusionDrive
   Size:         888087773184 B (888.1 GB)
   Free Space:   0 B (0 B)
   |
   +-< Physical Volume B1B14251-2DB3-491C-9E7A-5C2FD11881BA
   |   ----------------------------------------------------
   |   Index:    0
   |   Disk:     disk0s2
   |   Status:   Online
   |   Size:     239713435648 B (239.7 GB)
   |
   +-< Physical Volume D0BA2837-514D-4620-8E1D-26D18137CA94
   |   ----------------------------------------------------
   |   Index:    1
   |   Disk:     disk1s2
   |   Status:   Online
   |   Size:     648374337536 B (648.4 GB)
   |
   +-> Logical Volume Family 736A8900-FE9C-4342-A932-EDC35444774C
       Encryption Status:       Unlocked
       Encryption Type:         None
       Conversion Status:       NoConversion
       Conversion Direction:    -none-
       Has Encrypted Extents:   No
       Fully Secure:            No
       Passphrase Required:     No
       |
       +-> Logical Volume B4997853-59F8-4480-BB48-3481B2F2A123
           Disk:               disk2
           Status:             Online
           Size (Total):       884000030720 B (884.0 GB)
           Size (Converted):   -none-
           Revertible:         No
           LV Name:            Mayfly
           Volume Name:        Mayfly
           Content Hint:       Apple_HFS
$ sudo gpt -r -vv show disk1
Password:
gpt show: disk1: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1465149167
      start        size index contents
          0           1         MBR
          1           1         Pri GPT header
          2          32         Pri GPT table
         34           6
         40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 1266356128      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1266765768     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1268035304         280
1268035584   197111808      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
$ sudo fdisk /dev/disk1
Disk: /dev/disk1     geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 1268035583]     *2: 07 1023 254 63 - 1023 254 63 [1268035584 - 197111808] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

My setup is very similar to your's, Ryan, on a Mac Mini5,2 and the ordering is different and Winclone was not used.
1. New Mini with internal 500GB with Mountain Lion(ML), put into an external FW enclosure, so the Mini can/could be booted using an external drive for contigency.
2. Replaced internal stock HDD (500Gb/5400rpm) with SSD/HDD (256Gb SSD/1TB 5400rpm).
3. Installed W7 x64 on 64GB partition on HDD, which was a single-partition drive to begin with.
4. The remaining HDD partition and the entire SSD was put into a Fusion drive.
5. Using Command-R, new ML installed on Fusion HD.
Here is what I currently have...(Disk0 - SSD, Disk1- 1TB HDD, Disk2 - Fusion, Disk3 - External FW).
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         255.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         934.5 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion HD              *1.2 TB     disk2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS Rescue HD               371.8 GB   disk3s2
   3:                  Apple_HFS Leopard HD              31.9 GB    disk3s3
   4:                  Apple_HFS Snow Leopard HD         31.9 GB    disk3s4
   5:                  Apple_HFS Lion HD                 31.3 GB    disk3s5
   6:                 Apple_Boot Lion Recovery HD        650.0 MB   disk3s6
   7:                  Apple_HFS Mountain Lion HD        31.3 GB    disk3s7
   8:                 Apple_Boot Mountain Lion Recove... 650.0 MB   disk3s8
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
    =========================================================
    Name:         Fusion
    Size:         1190201270272 B (1.2 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     255716540416 B (255.7 GB)
    |
    +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     934484729856 B (934.5 GB)
    |
    +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
            Disk:               disk2
            Status:             Online
            Size (Total):       1185508581376 B (1.2 TB)
            Size (Converted):   -none-
            Revertible:         No
            LV Name:            Fusion HD
            Volume Name:        Fusion HD
            Content Hint:       Apple_HFS
sudo gpt -r -vv show disk1
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1825165488      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1825575128     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1826844672   126679040      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header

How do I back up my Boot Camp partition to external firewire drive?

I have a 15 GB Windows XP Boot Camp partition (FAT32). I want to back it up to a 120 GB external Firewire drive. (I know the backup won't be bootable). In OX X Disk Utility, I formatted the external drive as MS-DOS (FAT). I planned to do the backup using the Windows Backup utility.
However, when booted into WinXP, Windows will not recognize the external hard drive. I thought I might need to create a FAT32 partion of 32 GB or less on the external drive, but I apparently can't do this in OS X or Windows (since Windows doesn't recognize the drive).
Any suggestions on how to backup the Boot Camp partition will be appreciated. I'm mainly interested in preserving all programs and data. Ideally, a clone could be created that could be restored back to the original partition in bootable form, but from studying this and other forums, it dosn't seem to be easy to do this for a FAT32-formatted volume.

My goal was to create a bootable clone of my FAT32 Boot Camp partition, while at the same time increasing the size of the partition from 15 GB to 32 GB if possible. This is what I did:
1. As suggested in this thread, I used Disk Utility to create a disk image. I formatted it as MS-DOS (FAT), and made it 32 GB in size.
2. Used the Finder to copy all files from my 15 GB Windows XP partition to the new disk image.
The following steps were only to determine if the disk image is a viable backup:
3. Removed the internal hard drive with my original Win XP partition, and installed a new internal hard drive.
4. Used Boot Camp Assistant to create a 32 GB Boot Camp partition on the new internal drive.
5. Inserted my Win XP installation disk and started the Windows installation. Formatted the new partition as FAT32. (I used the long rather than the quick format method--not sure if this was necessary.)
6. Continued the Windows installation to the point of restarting the computer, at which time I used the Option key to boot back into OS X.
7. Used the Finder to copy all the files from the 32 GB disk image to the new Boot Camp partition. (This overwrote a few Windows files installed by the aborted Win XP installation.)
8. Restarted and used the Option key to select the new 32 GB Boot Camp Partition. Windows booted as usual with all files, programs, etc. from the original 15 GB partition. Windows did complain about "new hardware" and required a restart, but all appears normal.
This indicates that the disk image containing all the files from my original Boot Camp partition is a viable backup, and can be used to restore the partition if necessary. I'm not sure if formatting the disk image as MS-DOS (rather than Mac OS extended) was necessary, or not.

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Boot Camp partition not bootable after update

Hi All, hi Loner T!
After an OSX update I lost my Boot Camp partition. Reading you replies here on the forum, i was able to save my important files through testdisk, for what i'm really thankful! Following your instructions in this thread (Bootcamp disk0s4 gone after Yosemite update) the bootcamp partition finally appeared in finder and disk utility.
But sudo gdisk /dev/disk0 returns with this:
Kovacs-Peter-Attilas-MacBook-Pro:~ kovacspeterattila$ Sudo gdisk /dev/disk0
Password:
GPT fdisk (gdisk) version 1.0.0
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
So if it is able i would avoid reinstalling windows, and all the applications with your help. I saw many people asking you about this case, so i hope you may can help me as well.
Thank you!

Hi LonerT, I too have lost the ability to boot into windows/bootcamp - only Mac & recovery are displayed at startup.
Below are my results for the same set of instructions.
What does it indicate?
Thank you!
Hils-MacBook-Pro-2:~ king_hil$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            175.0 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         50.0 GB    disk0s4
Hils-MacBook-Pro-2:~ king_hil$ diskutil cs list
No CoreStorage logical volume groups found
Hils-MacBook-Pro-2:~ king_hil$ sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 490234751
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 341796872      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
342206512    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
343476048   49103024
392579072   97654784      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856        863
490234719         32         Sec GPT table
490234751          1         Sec GPT header
Hils-MacBook-Pro-2:~ king_hil$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 341796872] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 342206512 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 392579072 -   97654784] Win95 FAT32L
I added:
Hils-MacBook-Pro-2:~ king_hil$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 341796872] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 342206512 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 392579072 -   97654784] Win95 FAT32L
Hils-MacBook-Pro-2:~ king_hil$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 be b7 90 5b dc 2d 75 3f bc f2 56 7b d7 ee 87 19 |...[.-u?..V{....|
00000010 b9 cd de 96 1f af c7 a9 ef 83 eb 21 fa 90 7e a2 |...........!..~.|
00000020 31 1a 9c e9 c3 ea c9 78 78 3f 02 1f 31 0f 54 90 |1......xx?..1.T.|
00000030 26 4d d9 a3 e1 a9 7f f4 f7 0f 65 e6 1e 6b fb c1 |&M........e..k..|
00000040 a6 13 bf 5e 52 89 ef 07 a5 d8 4b 32 86 93 94 09 |...^R.....K2....|
00000050 db 49 d6 84 6f 7f 51 54 fc a4 70 22 7b a2 78 a2 |.I..o.QT..p"{.x.|
00000060 76 52 b3 1f 62 68 62 72 d2 b6 17 7e be 8b d7 ff |vR..bhbr...~....|
00000070 c5 df 3b 5a f8 4b 71 2f 38 c3 4e 36 6f e6 cb f7 |..;Z.Kq/8.N6o...|
00000080 15 f2 8a 7f a5 bd e5 bd a3 aa 79 b5 bc 3a 5e 03 |..........y..:^.|
00000090 af f1 d7 c2 db 3e 1d 4e df a9 ef 14 d7 94 e0 74 |.....>.N.......t|
000000a0 3d 85 62 4a 71 4a 7b ca 70 ca 6c 9a be 17 2c bb |=.bJqJ{.p.l...,.|
000000b0 3f 29 17 31 95 30 2d ec 1d a9 92 a9 da 69 cd 54 |?).1.0-......i.T|
000000c0 c7 b4 69 6a 6c 6a 7e 6a b5 77 24 57 a7 ff 8c c0 |..ijlj~j.w$W....|
000000d0 2c 78 16 31 a3 32 a3 33 83 72 c6 62 2f 28 8f 59 |,x.1.2.3.r.b/(.Y|
000000e0 de 4c c4 ac 60 26 7d 26 0f d2 a2 69 9b 35 ce 8c |.L..`&}&...i.5..|
000000f0 cd 2c 60 24 64 31 c7 d1 49 64 1e 3a 27 3b a7 3c |.,`$d1..Id.:';.<|
00000100 a7 35 67 38 4f e9 e4 3e e7 3f 17 bd 0f 2e 7d ae |.5g8O..>.?....}.|
00000110 60 ae 7c ae b1 57 64 fa e7 c6 e6 e6 1d 2d bc 3a |`.|..Wd......-.:|
00000120 57 0b dc 0b 62 db 21 51 0b ea 0b 7a f6 39 2f f8 |W...b.!Q...z.9/.|
00000130 ee 83 89 5d 14 2e 64 2e 14 2f d4 2d 6a 17 ba 17 |...]..d../.-j...|
00000140 cd 0b d3 0b cb 0b db cb f1 d2 69 40 5f d0 18 89 |..........i@_...|
00000150 25 b9 65 cc 92 c1 92 f9 92 e3 92 d7 52 d0 52 cc |%.e.........R.R.|
00000160 56 bc 6c 29 bf 53 f3 52 d7 d2 48 a7 c5 a5 9d d5 |V.l).S.R..H.....|
00000170 bb c2 be 22 b0 22 b5 8a 5a c5 ac 62 57 50 ae 52 |..."."..Z..bWP.R|
00000180 57 ec 57 dc 56 b9 2b 91 2b 29 ab b2 95 c2 95 aa |W.W.V.+.+)......|
00000190 55 cd 4a f7 ca c8 ca dc ca 9a cf d0 67 e6 e3 8f |U.J.........g...|
000001a0 ea 2a 27 0a ee 46 b1 61 5e 78 22 f7 c6 13 31 c7 |.*'..F.a^x"...1.|
000001b0 96 f3 f5 12 be 81 2d eb 55 a5 aa 37 a0 4d 1f d6 |......-.U..7.M..|
000001c0 58 f6 76 3a f3 0e 80 3c ab db a3 1a eb cd 64 6f |X.v:...<......do|
000001d0 18 d7 5d e7 a2 37 ef b2 7b 53 aa b1 37 6f 86 bf |..]..7..{S..7o..|
000001e0 a4 de de 3b ce aa b7 72 62 bd a8 53 ed ad 78 72 |...;...rb..S..xr|
000001f0 4f 6a f6 be b8 f8 cd 13 79 3d 99 9a cd 0b b4 bd |Oj......y=......|
00000200

How do I restore data to a new mac with windows boot camp partition?

Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on Lion

I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

How to fix Boot Camp partition that won't boot

Soooo...coming new to this thread, after reading of it on NERDR.COM.
Have new iMac 27" and have been TRYING to load and use Win 8.1 Enterprise (MSDN) on BootCamp in Mavericks 10.9.3.
Could not even get setup to load until after I removed my three external G-Drives, finally got it to load, and actually got Windows pretty much configured and activated, and loaded Office 2013 and VISIO. But, I have an increasing number of BSOD (I assume it is) issues with kernel_security_check_failure which stop the computer, nothing works, and I have to power off. This has caused drive issues, and while I've been repairing them, I can no longer boot into Windows. Tried repairing that with the original Win 8.1 DVD, but, Automatic Repair can't fix, and I was unsure if using BootRec was a good idea?
So ran the three SUDO commands on my Drive 0, and here are the results (had to paste a screen shot, as, SOMETHING in the middle (blue) text won't allow me to post it):
Question is, should I go ahead and use the gdisk utility to repair things, or...something else?
And...if there is some kind of issue with using Boot Camp when you have external drives attached, what can be done to get around that?
Thanks!

The fdisk output shows that it is a single GPT disk. Has any disk manipulation been done, like resizing or repartitioning.
Your GPT looks correct. If you create a Hybrid MBR via gdisk and include partitions 2,3 and 4 and make 4 bootable, does Windows partition show up in Startup and as a separate volume in Finder?
Please see https://discussions.apple.com/thread/5641066 for Hybrid MBR creation.

How do I create a Boot Camp partition with Windows & blank NTFS partitions?

I'm trying to create this kind of setup:
OS X partition
Windows 7 partition
blank NTFS partition (no OS)
blank NTFS partition (no OS)
This would be much easier if I created just the OS X partition and the Windows 7 partition with the Boot Camp Assistant tool (done this many times before successfully on other computers). The problem begins when I try to split the Boot Camp partition through the Windows 7 DVD partition manager during setup by deleting the Boot Camp partition, and recreating three partitions from the unallocated space. After installing Windows 7 on one of those new three partitions, I'm getting all kinds of startup errors when I try to install the Boot Camp drivers.
What would the best way to achieve this setup?

Yes, I researched many options for three partition dual boot set ups. After many trials and tribulations, there is a simple method that I have used on multiple MBPs.
1. Run Boot Camp Assistant, as per the Boot Camp Installation and Setup Guide. Once you have Mac OS X and Windows 7 set up, check the partitions and back them up (with Time Machine, and Winclone).
2. Get iPartition, and resize the Mac and Windows partitions to what you want, say 100GB each, and set up your other partitions to the size you want. I put mine "after" the Windows partition, at the end of the disk, and have had no problems. It takes a few minutes to create the bootable CD for iPartition, but you get everything you need to do so from Coriolis Systems. You will need your Mac OS X installl disc.
3. Install Paragon's HFS+ for Windows and NTFS for Mac, and everybody can read and write everything.
4. I have both Time Machine and Norton 360 back up the Data partitions, just in case -- to an external drive, of course.
You can boot to either OS and access any partition.

Help with boot camp partition on leopard!

So I wanted to increase my partition disc size, because I ran out of space. So I restored it and started the whole process over again, using like 75 out of the 102 gigs of free space. This time, something went wrong. I window came up and said:
"The disk cannot be partitioned because some files cannot be moved. Back up the disk and use the disk utility to format it as a single Mac OS Extended(journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
All I want to do is repartition it... I need help plz, thanks. Oh and I assumed the big files were obstacles so I deleted some 1-6 gig stuff I used to use not anymore(not any system stuff either) but that didn't work. Help!

I bought a new MacBook today with Leopard. I tried to install Windows XP (with service pack 2). I chose 32GB for windows. When I clicked start installation the screen went white, the windows CD was ejected and nothing else happened.
I had to switch it off manually and then I tried to restart the MacBook. The screen was just black.
I just read this:
+This means that the Windows partition is not bootable, usually because of a formatting problem. The Boot Camp Setup Assistant creates the Boot Camp partition, but the Windows installer must format it. Boot back into Mac OS X and re run the Boot Camp Setup Assistant. Remove the partition and re create it. Then install Windows again, this time allowing Windows to format the partition. Refer to the "Boot Camp Installation & Setup Guide" PDF document for more detail on installing Boot Camp.+
I couldn't reboot it into the Mac OS X so I went back to PC World and created merry ****.
They blamed me and I blamed them and said there was a formatting problem. I left the MacBook with them and they said they would try and install windows XP for me. I collect it today.
What do I do if they can't get windows on there as I don't really understand what I read above so will need something a bit clearer....step-by-step.
Can anyone help me please?

Boot Camp partition data disappeared - No DVD drive

Up until today my Boot Camp partition was working swimmingly.
Today, I was greeted with the "bootmgr not found" error. After restarting into OSX, none of my files on the drive show up (I have Paragon NTFS) pictured below:
It looks like the data is still there, but something in the partition tables/mbr is messed up. If possible, I'd like to salvage the existing data.
To complicate things, I don't have a DVD drive on my MBP. Also, apparently I cannot boot from windows USB keys.
This makes the usual windows boot repair difficult.
My attempted solution, which worked to get windows installed in the first place was to make a new partition, and copy Windows install files to it, but I can't seem to get that to boot, either. I tried using Boot Camp Assistant to prepare the files, as well as unetbootin. I also tried formatting as both HFS and Fat, and copying the files from the windows install disk. I also installed rEFIt, but I just get errors when attempting to boot the install partition.
My last ditch attempt was to rig something through VMware fusion to repair the drive by mounting it as a raw disk,
and loading my Windows 7 ISO to perform the repair, but raw disks don't seem to work well with partitions, and I didn't want to nuke all of my data.
Does anyone have suggestions as to how I might fix this drive, to at least grab some files off of it?
Any ideas are greatly appreciated.

To clarify, in Bootcamp the " This disk cannot be partitioned because some files cannot be moved" error is relating to my OSX boot drive - 128Gb SSD. It currently has ~30gb free. Is there a way I can clone this data, and restore it without a DVD drive, or some other bootable media?
Not being able to create a second partition is on my second drive, 320Gb. Which has 64Gb free. Searching around the net, I saw that resizing a partition to it's smallest possible size is the easiest way to defrag free space in OSX. I did that, and the option to create a second windows partition is still greyed out.
Even if I nuke the existing bootcamp partition, I need another working, bootable partition that I can boot the Win 7 disc from. Not sure what's changed since my initial install, but it seems even more difficult this time.
I'll try using carbon copy cloner on my system partition, and test if it's bootable from USB. I'm running out of Ideas.

Copying a disk which has a boot camp partition

Colleague has an iMac with a boot camp partition, and the disk has failed. It won't boot off the mac partition, although the windows partition works fine. He bought a new 1T disk and we are trying to copy his disk on to it, and will then install the new disk into the iMac.
So it's booted up using the SnowLeopard install disk and I am running disk utility. First I tried to partition the disk into something that looks like the partition scheme on the current disk -- big partition for os x, little partition for windows, although big & little are 750GB vs 250GB as opposed to the smaller version on the 260GB original.
Then I tried to use the Restore to go from the old bootcamp partition to the new MS-DOS (fat) partition on the new drive. This failed. First it resized the fat partition down to an ever-so-slightly smaller partition than the NTFS original, and then generated an error because the partition is too small.
How do we do this?

Loner T wrote:
1. Do you have a TM backup of the OSX which came from this "failed" disk? It may just be a matter of reinstalling OSX too work around bacd blocks?
My boss tried that about a year ago, but it failed again after not too long.
2. What is the failure when switching to OSX from Windows?
Not sure. Now when I option-boot the machine I can't see either partition -- I can see the installer dvd and the new drive in its external enclosure.
3. Windows can be installed only on the internal disk, which is a Windows restriction that BC enforces. Apple allows OS to installed on external drives. Ask Gates/Ballmer/Nadella why?
4. Yes, you can get data of the disk, not matter how it is connected, internal or external. It is tricky to take a Volume and move it. Can I suggest an investment in Winclone to backup and restore (http://www.twocanoes.com/products/mac/winclone) Windows?
5. Yes, but I would recommend putting Bootcamp Windows back as BC/Windows, rather than virtualizing it using Parallels.
Well moving the new disk in to the iMac is one of the tasks we need to accomplish, so we can do it now. My plan was to use dd to move the data from the partition on the old drive to the partition on the new drive, once we can get Boot Camp Assistant to create it. Winclone looks like a great product, but it's $29. Parallels is only $79, and if a disk fails or you migrate to new hardware all of the Parallels vms come over effortlessly using Setup Assistant or Migration Assistant.

Boot Camp partition moved to external:"No bootable device found"

Similar Messages

Maybe you are looking for