Boot Camp partition not bootable after update

Hi All, hi Loner T!
After an OSX update I lost my Boot Camp partition. Reading you replies here on the forum, i was able to save my important files through testdisk, for what i'm really thankful! Following your instructions in this thread (Bootcamp disk0s4 gone after Yosemite update) the bootcamp partition finally appeared in finder and disk utility.
But sudo gdisk /dev/disk0 returns with this:
Kovacs-Peter-Attilas-MacBook-Pro:~ kovacspeterattila$ Sudo gdisk /dev/disk0
Password:
GPT fdisk (gdisk) version 1.0.0
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help):
So if it is able i would avoid reinstalling windows, and all the applications with your help. I saw many people asking you about this case, so i hope you may can help me as well.
Thank you!

Hi LonerT, I too have lost the ability to boot into windows/bootcamp - only Mac & recovery are displayed at startup.
Below are my results for the same set of instructions.
What does it indicate?
Thank you!
Hils-MacBook-Pro-2:~ king_hil$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            175.0 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         50.0 GB    disk0s4
Hils-MacBook-Pro-2:~ king_hil$ diskutil cs list
No CoreStorage logical volume groups found
Hils-MacBook-Pro-2:~ king_hil$ sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 490234751
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 341796872      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
342206512    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
343476048   49103024
392579072   97654784      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856        863
490234719         32         Sec GPT table
490234751          1         Sec GPT header
Hils-MacBook-Pro-2:~ king_hil$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 341796872] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 342206512 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 392579072 -   97654784] Win95 FAT32L
I added:
Hils-MacBook-Pro-2:~ king_hil$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 341796872] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 342206512 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 392579072 -   97654784] Win95 FAT32L
Hils-MacBook-Pro-2:~ king_hil$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 be b7 90 5b dc 2d 75 3f bc f2 56 7b d7 ee 87 19 |...[.-u?..V{....|
00000010 b9 cd de 96 1f af c7 a9 ef 83 eb 21 fa 90 7e a2 |...........!..~.|
00000020 31 1a 9c e9 c3 ea c9 78 78 3f 02 1f 31 0f 54 90 |1......xx?..1.T.|
00000030 26 4d d9 a3 e1 a9 7f f4 f7 0f 65 e6 1e 6b fb c1 |&M........e..k..|
00000040 a6 13 bf 5e 52 89 ef 07 a5 d8 4b 32 86 93 94 09 |...^R.....K2....|
00000050 db 49 d6 84 6f 7f 51 54 fc a4 70 22 7b a2 78 a2 |.I..o.QT..p"{.x.|
00000060 76 52 b3 1f 62 68 62 72 d2 b6 17 7e be 8b d7 ff |vR..bhbr...~....|
00000070 c5 df 3b 5a f8 4b 71 2f 38 c3 4e 36 6f e6 cb f7 |..;Z.Kq/8.N6o...|
00000080 15 f2 8a 7f a5 bd e5 bd a3 aa 79 b5 bc 3a 5e 03 |..........y..:^.|
00000090 af f1 d7 c2 db 3e 1d 4e df a9 ef 14 d7 94 e0 74 |.....>.N.......t|
000000a0 3d 85 62 4a 71 4a 7b ca 70 ca 6c 9a be 17 2c bb |=.bJqJ{.p.l...,.|
000000b0 3f 29 17 31 95 30 2d ec 1d a9 92 a9 da 69 cd 54 |?).1.0-......i.T|
000000c0 c7 b4 69 6a 6c 6a 7e 6a b5 77 24 57 a7 ff 8c c0 |..ijlj~j.w$W....|
000000d0 2c 78 16 31 a3 32 a3 33 83 72 c6 62 2f 28 8f 59 |,x.1.2.3.r.b/(.Y|
000000e0 de 4c c4 ac 60 26 7d 26 0f d2 a2 69 9b 35 ce 8c |.L..`&}&...i.5..|
000000f0 cd 2c 60 24 64 31 c7 d1 49 64 1e 3a 27 3b a7 3c |.,`$d1..Id.:';.<|
00000100 a7 35 67 38 4f e9 e4 3e e7 3f 17 bd 0f 2e 7d ae |.5g8O..>.?....}.|
00000110 60 ae 7c ae b1 57 64 fa e7 c6 e6 e6 1d 2d bc 3a |`.|..Wd......-.:|
00000120 57 0b dc 0b 62 db 21 51 0b ea 0b 7a f6 39 2f f8 |W...b.!Q...z.9/.|
00000130 ee 83 89 5d 14 2e 64 2e 14 2f d4 2d 6a 17 ba 17 |...]..d../.-j...|
00000140 cd 0b d3 0b cb 0b db cb f1 d2 69 40 5f d0 18 89 |..........i@_...|
00000150 25 b9 65 cc 92 c1 92 f9 92 e3 92 d7 52 d0 52 cc |%.e.........R.R.|
00000160 56 bc 6c 29 bf 53 f3 52 d7 d2 48 a7 c5 a5 9d d5 |V.l).S.R..H.....|
00000170 bb c2 be 22 b0 22 b5 8a 5a c5 ac 62 57 50 ae 52 |..."."..Z..bWP.R|
00000180 57 ec 57 dc 56 b9 2b 91 2b 29 ab b2 95 c2 95 aa |W.W.V.+.+)......|
00000190 55 cd 4a f7 ca c8 ca dc ca 9a cf d0 67 e6 e3 8f |U.J.........g...|
000001a0 ea 2a 27 0a ee 46 b1 61 5e 78 22 f7 c6 13 31 c7 |.*'..F.a^x"...1.|
000001b0 96 f3 f5 12 be 81 2d eb 55 a5 aa 37 a0 4d 1f d6 |......-.U..7.M..|
000001c0 58 f6 76 3a f3 0e 80 3c ab db a3 1a eb cd 64 6f |X.v:...<......do|
000001d0 18 d7 5d e7 a2 37 ef b2 7b 53 aa b1 37 6f 86 bf |..]..7..{S..7o..|
000001e0 a4 de de 3b ce aa b7 72 62 bd a8 53 ed ad 78 72 |...;...rb..S..xr|
000001f0 4f 6a f6 be b8 f8 cd 13 79 3d 99 9a cd 0b b4 bd |Oj......y=......|
00000200

Similar Messages

All files on Boot Camp partition mysteriously erased after 10.5.3 update

My wife's MBP 2.4 was running 10.5.2 with a Boot Camp installation of Windows XP. The other night she upgraded to 10.5.3 and everything on her Boot Camp partition was erased somehow.
She spent most of the day working in Windows. During the day someone gave her a usb key with some photos on it that when she plugged it in to her computer something came up in Turkish (she is presently in Turkey) that her friend said she should just close the window and she did. She shut down and switched over to the 10.5.2 install, repaired permissions, and then ran software update to go to 10.5.3. I believe her Boot Camp is updated to the most recent version on the PC side. After the update completed she went to go back into Windows and could not start up in it. It turned out somehow everything on the Boot Camp partition was gone. The partition name was the same as it had been previously and it shouls as all of the space available. None of the material was in the Trash on the Mac side and she had quite a build up in the Trash folder - so it wasn't put in the Trash and then the Trash emptied. It was as if someone had reformatted the partition.
I would chalk this up to user error when she was in disk utility maybe or someone in her studio screwing around with her computer but the same thing apparently happened to one of her classmates shortly before leaving for Turkey. Anyone heard of this happening or have any thoughts?
I had her saving all data to the Mac partition so luckily no data was lost - we just need to reinstall the programs to the Windows partition.
Thanks!

Nope, that didn't happen. The mbp has been loaded directly with Leopard since release day, and had few problems. I've done all the updates from 10.5.0 without any issues. But it was definitely something in the 10.5.3 update that hosed my video (or just a really, really strange coincidence and/or bad timing).
It's not just an OS driver, either. This is lower level than that, because I get NO video from a complete startup. There's no grey screen with the apple logo-- it stays completely blank. This almost surely means that the low-level firmware got corrupted or flashed incorrectly. The fact that the OS detects it as something completely different (Intel GMA X3100) supports this idea.
Thinking back, I did do the update with my laptop screen closed and using a 20" Apple Cinema Display, which is how I use the laptop 90% of the time. And in each of the previous updates, I'm certain they were installed similarly. I mention this, because someone else mentioned having the same issue as me, and noted that the update was done with an external display. Perhaps the firmware update is bugged so that if it doesn't detect the native display, it gets hosed...
I saw some other suggestions in another thread that sounded interesting. For instance, you can create a self booting CD on another Mac that reflashes the EFI (low level bios) to a factory setting. This could potentially fix it, and I would be willing to try it, if I still had my laptop.
In the future, just because things like this make me paranoid, I'll probably reboot the mbp and use only the native display before I do any updates...
Rich

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

Boot Camp partition not listed in Windows Setup

I am trying to install Windows 7 with DVD and I used the Boot Camp assistant 5 run in OS X Mavericks (10.9.1). Everything was copied with latest drivers, created Boot Camp partition. After that Mac restarted and booted into the windows installation. I run install process and it says something like: "Any media were not found." No drive found here. So in this stage my install journey ends. If I going back to OS X and check Disk Utility, the Boot Camp partition is there. So I don't understand why the installation can't find any partitions even drives.
any solution for case this ?

you need to install windows support software on a usb 2 flashdrive. more simply, start over in bootcamp, insert your usb drive as well as the dvd, check all 3 options. bootcamp will do the rest.
or it could be a problem with the install disc, why not download win 7 iso from here;
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
and go with this, its perfectly legal to use your activation code during instalation.

Windows 7 will only install on an NTFS Formatted disk: boot camp partition not formatted right?

I recently tried to install windows 7 on my Macbook (early 2008 white). Boot camp made the partition and I even got to the Windows install screen, but the partition made by boot camp could not be used to install windows on, because it was in the wrong format, evidently (Error: windows can only be installed on a NTFS disk, or something like that). I tried to find someway to reformat the partition in disk utility, but I don't see anything that could change the format. Please help! (If there isn't a way to fix this, is there at least a way to delete the partition? It's rather annoying having 100 gbs of your harddrive just siting there, unable to be used)
And just a side question, does it matter whether you install Windows 64 bit or 32 bit? The printed-out boot camp guide said only the 32-bit version, but it didn't include anything about Windows 7)
Thank you!
Computer: Early 2008 White Macbook
OS X (10.6.7)
500 GB hard drive
4 GB DDR2 RAM

Hi,
Windows 7 needs its system to be installed on a NTFS formatted partition.
There 's no way to use FAT32 as file system for this.
Pages 8 - 10 of the BootCamp Install Guide http://www.apple.com/support/bootcamp/ describe how-to reformat the partition to NTFS during the Windows installation.
Officially 64-bit Windows 7 is not supported on a 2008 MacBook.
However, there are instructions to be found on how-to do it nonetheless.
Regards
Stefan

Boot Camp partition not listed in Windows XP setup menu

My macbook hard drive is 230 GB, and I made the Windows partition to be 100GB in Boot camp assistant. When I ran Windows XP Setup, my boot camp partition was not listed in the menu, just my entire hard drive. The setup disk I am using is Windows XP Home Edition SP2, so I know it's not compatibility issue. I tried it again at least 3 times, and it didn't work. Does anyone have a solution to this problem?

you need to install windows support software on a usb 2 flashdrive. more simply, start over in bootcamp, insert your usb drive as well as the dvd, check all 3 options. bootcamp will do the rest.
or it could be a problem with the install disc, why not download win 7 iso from here;
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
and go with this, its perfectly legal to use your activation code during instalation.

Boot Camp will not work after installing recovery disk

I purchased a refurbished Macbook Pro 2012. I went ahead and installed dual ssds and used the Mac OS X recovery disk from USB flash drive. I wanted to install WIndows 7 through bootcamp. Bootcamp will not start after selecting continue. I'm not sure if boot camp is corrupted or something I did wrong.

Well you'll need to see if that remote app has an update or if it is compatible with IOS 7.
since you didn't state which remote app your using.

Boot Camp partition not found by Windows installer

So I switched up to Leopard this morning with a fairly smooth Archive and Install.
I've got an XP Pro SP2 CD raring to run some Windows games, so I give Boot Camp Assistant a whirl. I create a 15 GB partition using the Assistant, and it reboots with my XP CD. XP goes through all of its driver loading, and I get past the disclaimer screen. But on the setup screen, where partitions are supposed to be listed, the only partition I see is my 130 GB OS X partition, and nothing else.
I can see the 15 GB Fat32 partition labeled BOOTCAMP in both Leopard, and with a liveCD version of FreeDOS, so I know it's actually there. But the XP installer, for some reason, cannot see it.
Anybody encounter this? Anybody know what I can do? I'm hurting for some Orange Box action.

you need to install windows support software on a usb 2 flashdrive. more simply, start over in bootcamp, insert your usb drive as well as the dvd, check all 3 options. bootcamp will do the rest.
or it could be a problem with the install disc, why not download win 7 iso from here;
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
and go with this, its perfectly legal to use your activation code during instalation.

Windows Boot Camp partition not showing up on Startup Disk in Snow Leopard

Dear Fellow Mac Heads,
I have Windows 7 RTM installed as Boot Camp in one partition and Snow Leopard 10.6.1 installed in another. In Windows, the Boot Camp icon shows everything (i.e. Network, Windows 7, and Mac OSX Snow Leopard) so I can switch back and forth as I please. But in Mac OS, the Startup Disk menu under Systems Preferences only shows the Mac partition and Network. Windows 7 is nowhere to be found. I can't even do the OPTION on keyboard boot to get into Windows. I have to shutdown the machine, restart while holding onto OPTION key before all partitions show up. What's wrong with this picture? Is this happening to anyone else? Thanks in advance.

Maybe you are using something like NTFS-3G?
Maybe this thread has something for you...
http://discussions.apple.com/thread.jspa?threadID=2146363&tstart=30
Oh, sorry I just noticed that you have read or posted in that thread, but didn't like the answer?
You get strange results with many 3rd party products. I don't use Bootcamp at all. Parallels 4 works very well with Snow Leopard and none of this booting back and forth hassle. Windows is just for research, use the Mac side for performance.

Snow Leopard, boot camp partition not mounting.

Hi all,
I have a system that was leopard, and I installed Bootcamp with Windows 7 64bit. Was working well until I upgraded to Snow Leopard.
The Bootcamp partition is not being seen in Snow Leopard. I can, however, hold down the option key on the Mac and select the window 7 partition to boot from.
I have looked through the forums but haven't really seen this issue addressed, or if It was, then I didn't see it (so sorry.)
Please any advise or help would be great.
John

Is it on the same drive?
On Mac Pro, I would not, I'd keep them separate.
With ANY OS update/upgrade (10.5. -> 10.6) I ALWAYS reformat and initialize the drives first before installing - there are changes to partition tables, and while some systems are fine, you should have backups for both Windows and Mac OS before you began, too.
Other than repairing Mac OS, and checking that you aren't using NTFS driver, and everything is up to date and SL-compliant... and you can set the default in 7 to reboot back into 7 or OS X.
4-core... does that mean 2006? or 2009?

Can't see Windows 7 Boot Camp partition from Mac

I've had a Win7 boot partition on my 2011 MBP for a while and it boots just fine. I have a Mac boot partition, a Mac data partition, and a NTFS Win 7 partition. But the Boot Camp partition is greyed out and invisible when booted in to the Mac.
When in Windows, I can see and use the Mac partition from Win7 with MacDrive. The problem is that I cannot see the Windows partition from the Mac. I have Paragon NTFS for Mac installed as well as MacFuse. I tried to see the partition with CampTune and got this error:
I also tried going to the BootCamp Assistant and saw this:
Yet when booted in Windows, I see the Mac partition just fine.
Here is the disk info from terminal:
Uptime: 11:57 up 3 days, 12:28, 2 users, load averages: 0.56 0.56 0.64
~ > sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1465149167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   469926800      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
   470336440      262144
   470598584   699733064      3 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1170331648      262144
1170593792   294553600      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
~ > sudo fdisk /dev/disk0
Disk: /dev/disk0          geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 469926800] HFS+
3: AF 1023 254 63 - 1023 254 63 [ 470598584 - 699733064] HFS+
*4: 07 1023 254 63 - 1023 254 63 [1170593792 - 294553600] HPFS/QNX/AUX
~ >
Does anyone know if I can repair this without having to re-format? I have a 13" White MacBook as well and this setup works just fine. I did it such a long time ago that I forgot how I did the first one.
There is another thread on here that similar but not quite like my problem because I ca actually boo into Windows.
If anyone can help it would certainly be appreciated!
Thanks,
Randy

go to --------http://www.cnet.com/news/boot-camp-partitions-not-working-after-installing-os-x- lion/#postComments
just disable your ntfs software --- no need to uninstall

Windows will not boot to my boot camp partition on a DIY fusion drive - gives "No bootable device found" error

I have a MacBookPro 9,1 (mid-2012, non-retina) running OS X 10.8.2. Here is what I have done to my system:
Installed Windows 7 x64 Pro to a boot camp partition; installed all windows updates.
Using WinClone, save an image of this boot camp partition.
Removed optical drive and HDD.
Installed HDD in place of optical drive.
Installed SSD in place of HDD.
Booted to recovery partition, installed OS X on a flash drive.
Booted to flash drive, created fusion drive using [MacWorld's instructions](http://www.macworld.com/article/2014011/how-to-make-your-own-fusion-drive.html)
Booted to recovery partition on flash drive.
Restored system to fusion drive from a Time Machine backup. Unfortunately, it seems that because I never installed OS X on my fusion drive, I do not have a recovery partition. But that's an issue for another day.
Using Boot Camp assistant, created a boot camp partition on my HDD.
Using WinClone, restore my Windows installation from the previously created image.
Now, Windows boots to a black screen telling me that it can't find a bootable device. I have tried a few things to resolve this, all without effect:
I know that VMware Fusion has to prepare a boot camp partition in order to virtualize it, so I figured it might inadvertently fix things. Alas, while it *did* successfully boot my boot camp partition into a virtual machine, I still can't boot into Windows.
I figured I'd just try to reinstall Windows. Surprisingly, my system booted to my Windows install disc, which was in my original optical drive (which I had put in a USB case). But, Windows refused to install, giving me a an error 0x8030024. It seems the solution to this issue is to disconnect all drives but the one on which you want to install Windows, which is something I would dearly like to avoid. It would be a pain, but more than that, I'm afraid it would bork my fusion drive, even if I'm careful to never boot to OS X with the SSD disconnected.
A lot of places said that this error results from a borked MBR, and suggest using a tool like gptfdisk to rewrite it. I followed the instructions [here](https://discussions.apple.com/thread/4144252?start=0&tstart=0), but *that* didn't work either.
I am now completely at a loss as to how to proceed, and Google isn't much help either.
In conclusion, here is some information that you may find helpful:
    $ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *240.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         239.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         648.4 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                100.9 GB   disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Mayfly                 *884.0 GB   disk2
$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 63DC419F-1A09-4C5B-977A-F59F79502CA1
   =========================================================
   Name:         FusionDrive
   Size:         888087773184 B (888.1 GB)
   Free Space:   0 B (0 B)
   |
   +-< Physical Volume B1B14251-2DB3-491C-9E7A-5C2FD11881BA
   |   ----------------------------------------------------
   |   Index:    0
   |   Disk:     disk0s2
   |   Status:   Online
   |   Size:     239713435648 B (239.7 GB)
   |
   +-< Physical Volume D0BA2837-514D-4620-8E1D-26D18137CA94
   |   ----------------------------------------------------
   |   Index:    1
   |   Disk:     disk1s2
   |   Status:   Online
   |   Size:     648374337536 B (648.4 GB)
   |
   +-> Logical Volume Family 736A8900-FE9C-4342-A932-EDC35444774C
       Encryption Status:       Unlocked
       Encryption Type:         None
       Conversion Status:       NoConversion
       Conversion Direction:    -none-
       Has Encrypted Extents:   No
       Fully Secure:            No
       Passphrase Required:     No
       |
       +-> Logical Volume B4997853-59F8-4480-BB48-3481B2F2A123
           Disk:               disk2
           Status:             Online
           Size (Total):       884000030720 B (884.0 GB)
           Size (Converted):   -none-
           Revertible:         No
           LV Name:            Mayfly
           Volume Name:        Mayfly
           Content Hint:       Apple_HFS
$ sudo gpt -r -vv show disk1
Password:
gpt show: disk1: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1465149167
      start        size index contents
          0           1         MBR
          1           1         Pri GPT header
          2          32         Pri GPT table
         34           6
         40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 1266356128      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1266765768     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1268035304         280
1268035584   197111808      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
$ sudo fdisk /dev/disk1
Disk: /dev/disk1     geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 1268035583]     *2: 07 1023 254 63 - 1023 254 63 [1268035584 - 197111808] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

My setup is very similar to your's, Ryan, on a Mac Mini5,2 and the ordering is different and Winclone was not used.
1. New Mini with internal 500GB with Mountain Lion(ML), put into an external FW enclosure, so the Mini can/could be booted using an external drive for contigency.
2. Replaced internal stock HDD (500Gb/5400rpm) with SSD/HDD (256Gb SSD/1TB 5400rpm).
3. Installed W7 x64 on 64GB partition on HDD, which was a single-partition drive to begin with.
4. The remaining HDD partition and the entire SSD was put into a Fusion drive.
5. Using Command-R, new ML installed on Fusion HD.
Here is what I currently have...(Disk0 - SSD, Disk1- 1TB HDD, Disk2 - Fusion, Disk3 - External FW).
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:          Apple_CoreStorage                         255.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:          Apple_CoreStorage                         934.5 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion HD              *1.2 TB     disk2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS Rescue HD               371.8 GB   disk3s2
   3:                  Apple_HFS Leopard HD              31.9 GB    disk3s3
   4:                  Apple_HFS Snow Leopard HD         31.9 GB    disk3s4
   5:                  Apple_HFS Lion HD                 31.3 GB    disk3s5
   6:                 Apple_Boot Lion Recovery HD        650.0 MB   disk3s6
   7:                  Apple_HFS Mountain Lion HD        31.3 GB    disk3s7
   8:                 Apple_Boot Mountain Lion Recove... 650.0 MB   disk3s8
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
    =========================================================
    Name:         Fusion
    Size:         1190201270272 B (1.2 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     255716540416 B (255.7 GB)
    |
    +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     934484729856 B (934.5 GB)
    |
    +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
            Disk:               disk2
            Status:             Online
            Size (Total):       1185508581376 B (1.2 TB)
            Size (Converted):   -none-
            Revertible:         No
            LV Name:            Fusion HD
            Volume Name:        Fusion HD
            Content Hint:       Apple_HFS
sudo gpt -r -vv show disk1
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1825165488      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1825575128     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1826844672   126679040      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header

Windows disc does not update after resizing boot camp partition

When I bought my iMac, it came with a 500 GB HDD. I used bootcamp to make a 200GB windows partition and a 300GB Mac partition. The other day I bought a 250GB SSD, and moved everything from my 300GB Mac partition onto the SSD.
My plan was to use the whole 500GB HDD for windows. So, I deleted the 300GB Mac partition and made it free space on the drive. I then expanded the boot camp partition to take up the whole drive using Mini Tool on windows 7.
Now, windows 7 shows that my drive is 465GB, but when I boot into mac, the bootcamp hard drive still reads 200GB and 300GB are "free space" even though I expanded the drive using Mini Tool.
I tried to fix this by filling up the hard drive with an extra 120 GB so it exceeded the 200GB limit that windows shows. But when I booted back into OSX to see if it had worked, none of the files were showing up in the drive, making me believe that boot camp and OS X are not reading changes I am making to the bootcamp drive when I use Windows.
How can I change this so Disk Utility shows the full size of the disc, like Mini Tool does?
I will try to upload screenshots soon.

Re-sizing Windows partitions is not supported on Bootcamp. It requires a clean install. The other option is using Winclone.
Boot Camp 5.1: Frequently asked questions
How can a Windows partition be resized after Windows is installed?
You need to delete the Windows partition using the Boot Camp Assistant, and start over to change the size of the Windows partition. Back up your important Windows files first.

Theres a Boot Camp partition, but it's not bootable

Hi, so I made a boot camp partition and then my computer restarted, and opened the windows installer. Me being stupid, I realised that I had forgot to put some drivers onto my USB. So, I went back to OSX (by quitting out of the installer and pressing OPTION while booting up) to get those pesky files.
Then I went into System Preferences to boot of Boot Camp, and Lo Behold! No bootable Bootcamp. It only shows my original hard drive and my Windows CD.
I am using OSX Mavericks and a early 2010 MBP.
Proof of my partition:
Proof of no bootable partition:
Note: Same thing happens when I restart my computer while holding OPTION, not bootcamp.

first one setup the partition for bootcamp then one install windows on the partition
did you install windows from dvd or usb stick ?
if not then you will not be able to boot from the bootcamp partition as it would not have an operating system installed on it

After Boot Camp partition, iMac no longer boots

Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
Thanks for your help, everyone.

On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
On the next reboot it should automatically boot into Windows.
A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
Stefan

Boot Camp partition not bootable after update

Similar Messages

Maybe you are looking for