Boot Camp partition question...

i plan on installing boot camp and using windows only for my XP copy of Adobe CS. so here's my question...
how many GB's do you think is necessary to partition for this operation? i dont want to partition too much, because i know i wont be using XP a lot, but CS files can get big.
also...i have a 40GB external USB hard drive at my expense as well. could i possibly revert XP to that disc instead of partitioning?

You can refer to this forum for all of your BC questions:
http://discussions.apple.com/forum.jspa?forumID=1165

Similar Messages

Parallel runs slow on Boot Camp partition and other questions...

Hi all,
I have had my MBP santa rosa for about 3 weeks. I love it. Everything is super fast and responsive on this thingy. I have parallel running on Boot Camp partition and it is slow. I mean its not awfully slow but when I click start (the play button of Parallel), I see the spinning beachball for 0.5 to 1 min. When I get to Windows XP or Vista (I tried both of them), there is no way parallel could perform up to "near native" speed, I get a lot of sand-clock and it takes 1 mins or so to boot up MS SQL server 2005. When i tried to open lots of windows at once, it freezes for a while then all the windows pop up. I dedicated 1gb of ram for parallel. I am thinking of removing boot camp and use parallel virtual drive on which to install windows. Would that make the performance any better?
I have another question. I bought Disk Warrior 4 but my lovely cousin broke the disc into half coz he thought it was a cheap toy. Is there anyway I can make another bootable CD for disk warrior? I know BootCD only works on Panther. Can I use SuperDuper to clone my MBP and put the image file on a PC-formated external hard drive to bootup from there to run Disk Warrior?
Thank you so much for your help. I gotta say this MBP is the best laptop I have ever used in my entire life. VEry happy with the purchase so far. Thank you Apple.
MacNo0b
p/s: Any recommendation on how to keep the Mac running well without slowing down? Cheers

I have to say, I have never used Parallels in a system with 2GB. I don't feel that it's worth it given Boot Camp is available. That said, if you run nothing else it should run quite happily.
If you're having problems getting through the installation try setting it up with a virtual environment that has no drive. That way you should be able to get through the installation/setup and then you can add your Boot Camp partition after that.
As for transferring files, I will either use Parallels folder sharing else a 1GB DOS formatted USB flash drive.
PS You're right, I certainly can't complain about the equipment I get to play with. I've had to fork out quite a bit of money for the privilege but it's all been worth it.

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

After Boot Camp partition, iMac no longer boots

Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
Thanks for your help, everyone.

On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
On the next reboot it should automatically boot into Windows.
A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
Stefan

Late 2013 MBP/Fusion/Boot Camp partition w/Windows XP (!), can I get Bluetooth working or should I give up?

Hello and please bear with the length of this post. I had an old MacBook Pro (2007 Santa Rosa) that ran Windows XP in a Boot Camp partition just fine. One thing Windows has that the Mac doesn't is a free OBD2 app that lets me communicate with a Bluetooth OBD2 scanner to reset my check engine light and read the codes. This scanner uses Bluetooth.
A few months ago by a stroke of good luck I got a new Retina MacBook Pro. Windows XP will not install on it, only Win 7 & 8 (I don't have the install disks anymore anyway). I did not want to buy a new Windows just to run this one program (the only Windows app I really need). I thought I could possibly run my old Win XP Boot Camp partition (now in an external USB3 case) under Fusion, and it turns out that I can indeed do this. However I can not get Bluetooth to work – Win XP, under Fusion, does not see any Bluetooth hardware. I got some help on the Fusion forum – I was told to uncheck the Share Bluetooth devices with the virtual machine box and check the Apple Bluetooth USB Host Controller box to connect Bluetooth to the virtual machine. WIn XP, under Fusion, does not seem to see any Bluetooth hardware.
My question is, do the Boot Camp drivers originally installed when I first used Win XP on my old Santa Rosa MBP have any role here? I was thinking I might have to update those drivers since I'm on a new Retina MBP, but the update notes specifically say the newer drivers are for Windows 7 and 8. I haven't tried to install them yet – maybe they'll even refuse to install, I don't know.
If I'm truly wasting my time trying to get this to work I'll fork over the $40 for the Mac OBD2 software, although I really only need it for a "single use" (trying to pass a state inspection, lol!). TIA for any help!

Please ignore the last message - I was hoping I could delete the thread but it looks like I can't.
After a little more investigation I've decided to give up this quest and pay the $40 for the Mac software.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

Help-Erasing a Boot Camp Partition Caused 32 GB of Disk Space to Vanish

Hi
I'm a new mac user I'd I have been really happy so far, expect for this problem:
-I created a 32 gb partition with boot camp.
-I tried installing windows xp without knowing I had to format the system to NTFS during the install
The installation didnt work, and I erased the bootcamp partition.
-When I tried to create a new boot camp partition, it said my Mac HD size hard drive is 227 gb, ie the *32 gb allocated to the partition had vanished*. In addition, I could not recreate a partition because of an error message.
-I ran the snow leopard CD's disk utility and thought that I had fixed the problem.
-However in boot camp, the mac drive is still only 227 gb (missing 32 gb). I can create partitions now, and deleting these partitions does cause any additional loss of disk space.
-I tried erasing empty disk space with no luck.
Does anyone know how to recover space lost by Boot Camp?
Thanks

qcpharaoh wrote:
-When I tried to create a new boot camp partition, it said my Mac HD size hard drive is 227 gb, ie the *32 gb allocated to the partition had vanished*. In addition, I could not recreate a partition because of an error message.
-I ran the snow leopard CD's disk utility and thought that I had fixed the problem.
-However in boot camp, the mac drive is still only 227 gb (missing 32 gb). I can create partitions now, and deleting these partitions does cause any additional loss of disk space.
Let me ask a simple question. What size HD do you have in your Mac? You say you see 227 GB and that 32GB is "missing". If I add those two numbers up I com up with 259 GB. I suspect that your "missing" space is due to the inconsistencies in which Snow Leopard now reports 1 GB. In some places it reports 1 GB as a hard disk manufacturer (1 GB = 1,000,000,000 bytes). In other places it reports 1 GB as a binary number (1 GB = 2^^30 [IIRC] = 1,073,741,824 Bytes). Since I do not know of any drive manufacturer that sells a 259 GB drive, I suspect that this is just due to the differing definitions of 1 GB.

Windows disc does not update after resizing boot camp partition

When I bought my iMac, it came with a 500 GB HDD. I used bootcamp to make a 200GB windows partition and a 300GB Mac partition. The other day I bought a 250GB SSD, and moved everything from my 300GB Mac partition onto the SSD.
My plan was to use the whole 500GB HDD for windows. So, I deleted the 300GB Mac partition and made it free space on the drive. I then expanded the boot camp partition to take up the whole drive using Mini Tool on windows 7.
Now, windows 7 shows that my drive is 465GB, but when I boot into mac, the bootcamp hard drive still reads 200GB and 300GB are "free space" even though I expanded the drive using Mini Tool.
I tried to fix this by filling up the hard drive with an extra 120 GB so it exceeded the 200GB limit that windows shows. But when I booted back into OSX to see if it had worked, none of the files were showing up in the drive, making me believe that boot camp and OS X are not reading changes I am making to the bootcamp drive when I use Windows.
How can I change this so Disk Utility shows the full size of the disc, like Mini Tool does?
I will try to upload screenshots soon.

Re-sizing Windows partitions is not supported on Bootcamp. It requires a clean install. The other option is using Winclone.
Boot Camp 5.1: Frequently asked questions
How can a Windows partition be resized after Windows is installed?
You need to delete the Windows partition using the Boot Camp Assistant, and start over to change the size of the Windows partition. Back up your important Windows files first.

Does Winclone still work to restore a Boot Camp partition?

I have a 50GB Boot Camp partition, NTFS file system, with Windows XP. My computer is a Mac Pro running OS X 10.6.5. I have been using Winclone to clone the Boot Camp partition as a backup. I know that Winclone is no longer supported, and have heard that Winclone may not work properly with Snow Leopard.
I have no problem creating an image of the Boot Camp partition using Winclone. I have not yet had to do a restore to a new partition, but assume that some day I may need to do so.
My question is: Has anyone running Snow Leopard successfully used Winclone to restore a Boot Camp partition?
A secondary question: Is there any other utility, running on the Mac side, that will clone/restore a Boot Camp partition?

coruscate wrote:
I have the Winclone backup, but I am unclear how to restore it.
Using Winclone, I can select the Image to restore.
When I click on Mount, Winclone puts a disk image of the partition on the desktop.
When I select the desired partition in Destination and click Restore, it tells me "No Windows Partition Found."
Has anyone done this? Can you give me any advice about how to complete the restore?
Good luck to you. I am trying to transfer/migrate my Bootcamp partition (XP pro, FAT32) to a larger HD. I tried Winclone, and like you could create an image, but am unable to restore it on the new drive. I get the same error that you do. I tried creating a Bootcamp partition, rather than having Winclone do it, but would get this error in the log:
Source image volume size is not an exact multiple of 1 MiB
This happened whether I used Bootcamp Assistant or Disk Utility to create the partition, and it didn't matter whether I used a larger partition size or attempted to match the existing one. Apparently Winclone measures the block-sizes differently than Finder, Terminal, or any other measurement that I have used reports.
I've read about suggestions to turn my old FAT-32 Bootcamp Parition into an NFTS one, but I'm loathe to do that since I have on idea if that will work.

OS X Yosemite (10.10.3) Boot Camp Partition Issue

I just updated the system to OS X 10.10.3 with the OS X Yosemite Recovery Update too. My boot camp partition went missing!!! I checked Disk Utility to see what is happening, the reply is "Repair the disk", when i click on Repair, it say the disk cannot not be repaired and needs to be reformat. Any one know what is happening?
P.S. I had post this question a while ago and stupidly click on Solved, so if you saw it please ignore it

Use Windows 7 installation media and repair master boot record !! That's it !!

Boot Camp Partition and OS X Cloning Apps?

I've tried a search of previous posts and can't get a bulletproof answer. Here goes:
Using XP SP3 in a Boot Camp partition on my iMac running Snow Leopard. Only one complaint (the metal keyboard Option key issue for boot up -- really lame).
The Windows partition is for two financial applications, mission critical ones. I copy the key data files over to my Mac side after using these Windows apps.
I back up my Mac side with SuperDuper! My mission critical files are thus picked up by my SuperDuper! routine. I've tried restoring them and it works without a hitch.
My question is: if my system HD goes south, will my SuperDuper! clone restore the previous partition structure on the new system HD? Also, I've always assumed I'd have to reinstall the Windows apps individually and replace the mission critical data files one by one in a separate process. Is this right?
I also keep Time Machine backups running. They pick up those mission critical copies brought over to my Mac side. Same questions re: a replacement system HD -- will the partition structure be restored, and am I right in understanding the apps and files on the Windows side are up to me to restore outside any Time Machine rescue.
Thanks much for your patience and your help.
Terry

Hi Terry,
your assumption is correct.
Neither SuperDuper nor Time Machine will clone or backup your Windows partition since both only handle harddisk/partitions that use the MacOS Extended file system.
Files that are on such harddisks/partitions are cloned/backuped regardless of their nature or origin.
So of you copy files from your WIndows partition to your OSX partition like your mission critical files, these are then cloned/backuped when using SuperDuper or Time Machine.
And yes, when booting from your external harddisk with the cloned OSX and then using SuperDuper to clone this OSX back to your internal harddisk all the files (and therefor also your mission critical files) are back "in place".
Same goes for when using a Time Machine backup for a full system restore.
After that you would have to reinstall Windows and the Windows programs to get it all back.
Currently Casper http://www.fssdev.com/products/casper/ is considered the best solution for a full Windows backup/restore.
Mike Bombich, the author of Carbon Copy Cloner (another cloning app for OSX) is to my knowledge working on an addition to CCC to clone or backup a BootCamp Windows.
But it's way too early to see any results on this.
Regards
Stefan

Could I reinstall OS X partition keeping the windows boot camp partition?

II have a OS x partition that need reinstall. In the same hd I have a Windows Boot camp partition. The question is, could I reinstall OS X partition without affect the Windows partition?
Thanks,
Jorge.

Sometimes it works, sometimes not.
Of course you should backup both.
Q: why do you think OS X needs to be reinstalled or something?
Disk directory trouble?
Because 3rd party disk utility can do better, as well as maybe clone Mac volume so you can boot and do more repairs.
Or maybe the partition table is shot. Or bad sectors. And bad sectors can require a full format.
In a perfect world, but disk drives and systems aren't

Creating and restoring a Boot Camp partition using Paragon

I am trying to restore a clone of the Boot Camp partition that's on my MacBook Air (Snow Leopard) to My MacBook Pro (Lion).
I was told I could do this without requiring the Windows 7 installation disk by using Paragon Hard Disk Manager.
I downloaded the Paragon Hard Disk Manager on the MacBook Air in the Windows partition and followed the steps the Wizard told me. I chose back up. I successfully backed up the Boot Camp partition but noticed that the amount of disk space on the back up external drive was about 8GB, but the amount used up by Boot Camp was 16 GB.
When I went into the new computer and tried to create a Boot Camp partition, I am not able to do this without installing Windows software.
When I plugged in the external drive which had the back up on it, it just has some files and no Wizard I can use to restore the Windows partition.
So I think I've done it wrongly.
When I first started the wizard, there was a choice of making an image. I did choose this initially and a message came up and said I had done this but there was nothing else - no information about where this image was and what I should do with it. So I chose "Back up" and that is where I am.
Even if I do manage to create an image that contains everything, the operating system and the files, how can I restore that to the newly created Boot Camp partition on the other computer if in order to create the Boot Camp partition I need to install a Windows 7 disk?
It's not that I don't have a valid Windows 7 installation disk, I do but I have to call telephone support to install it because the activation is tied to the first laptop which has issues and needs to be repaired and that's why I am doing the migration of the data. And it's inconvenient to do the telephone thing because it's after hours now and I want to get the clone of the Windows partition before I send off the computer for repairs which I am supposed to do tomorrow morning.
Plus, I am not sure by using the Windows 7 installation disk and migration of data method that I will have the partition looking exactly the same as before, and that's very important for me because I do internet banking with a foreign bank and it took ages for them to set up the internet banking on my computer, and I am worried that internet banking won't work if I do not have an exact clone of the Windows partition.
I can go back again and try making an image disk but I still have the problem of using the Paragon program which is a Windows program on the Mac operating system, which I have to use when I am creating the Windows partition. Is there other software from Paragon that I am supposed to get?

Paragon didn't work for me and their support is quite lousy. I think I just threw $50 away.
I didn't need another activation key to install Windows 7 on the second computer (MBP). The boot camp installation went smoothly. Once in Windows, I downloaded the software again, Paragon Hard Disk Manager, and then chose "restore". It didn't recognize the archive I had made on the external hard drive no matter what I did. I had to give up after a few tries.
So I went to the Paragon website to look for answers in the support section.
They do not respond to emailed support questions for up to three days after you send in the question even if you are a new customer.
I am tempted to ask for a refund because they have false advertising claiming that their product works when it doesn't.
The steps are not that hard to follow if you use their Wizard and the Wizard told me that I had done everything right and that I had created an archive and I named it and everything.
When I went to restore it, nothing. I couldn't even eject the volume. Very strange.
Their FAQ on Support site is unhelpful and full of technical terminology. Nothing pertains to my problem.
I really don't want the headache. Besides if all I wanted was to do a backup I could have used the free back up and restore utility in Windows 7 which is meant to be excellent.
Another Apple Support Discussion member said they had a similar problem, a problem with the archives, and that even after working with Paragon for seven months, it was still not resolved.
After a certain period of time after you've bought the product, you have to pay $50 to get support. It's not worth the bother.
It's a German company and German companies in general are not big into service. I can tell that this is true with this company.
So having been burned, I really do not want to keep going down this path. I really just want my money back.

Backup to TImeCapsule including Boot Camp partition

I used Boot Camp to install Windows 7 Professional on my new MacBook Air, and have now got Parallels Desktop 6 for Mac working OK with a Windows Virtual Machine. But I am reluctant to remove the Boot Camp partition. Now I have got TIme Capsule/Time Machine working OK for automatic backups - but the BootCamp/Windows stuff is not being backed up. Can anyone tell me how to include the Boot Camp partition and all my Windows-based work in the automatic backup 'of the entire machine' (the reason I bought a Time Capsule) to Time Capsule? It seems that only the MAC side of the machine is being backed up hourly by Time Machine. Can't find anything in Knowledge Base or Help about this. Thanks!

verycactus wrote:
I want to keep this discussion on MacBook Air not go to BootCamp topic because I need a wireless backup solution.
I'm suggesting you go there to find an app that will backup your BootCamp partition to a Time Capsule. I don't know if WinClone can do that, or if there are better options.
If I can partition my Mac using Boot Camp, is it possible to partition the Time Capsule
No. But you can create a +disk image+ on it, and back up the Windoze side to it, if you can find an app that will work. See the blue box in #Q3 of [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of the +Time Capsule+ forum).
you sold me all the bits, what's the answer please?
You're not talking to Apple here. We're just ordinary users, like you, volunteering our time, with the rare exception of an Apple employee posting here on his/her own time (and identified by a silver Apple logo), and in the +Discussions Feedback+ forum, where the Hosts (identified by a purple Apple logo) will post about the Discussions themselves, not technical issues.
Click +Help & Terms of Use+ at the right of this page for details.
I'd email Support but there's no email Support offered and I can hardly phone USA from Australia trying to get an answer to this.
Click +Contact Us+ at the bottom of the page to find numbers in Australia.
Maybe a Genius in my local retail Apple store can help?
Possible. But they generally don't seem to have much training on Time Machine or Time Capsules.
Info on the whole question of backup & data protection is fairly thin in the Apple world - or am I looking in tihe wrong place or calling it the wrong thing? thanks
For information on 3rd-party utilities to use with BootCamp, try the Boot Camp forum. For information on Time Machine, try the +Snow Leopard > Time Machine+ forum. There are several *User Contributed Tips* at the top of that forum. For Time Capsule questions/issues, there's a +Time Capsule+ forum in the +Digital Life+ section.

Boot Camp partition question...

Similar Messages

Maybe you are looking for