Boot camp partition trouble

When I try to create a simple 10GB partition for Windows, it begins to "shrink partition" and then says failed with error..."try decreasing the change in partition size"...or something like that. I have 80GB hard drive...40GB available....trying to use 10GB for Windows. Neither boot camp nor disk utilitiy allows me to create the partition...both fail. Any help is greatly appreciated.

I am having no luck. The only way I can repair disk is by using the Leopard disk and use the utilities function there to repair disk.....which I have done and found no problems. Then, trying to create a 10GB partition, 1st it says "Windows 10GB will be added" and "Mc will be resized". Then after it reads "verifying disk", then it states "shrinking disk". Finally I get "Partition failed with error. Partition cannot be resized. Try reducing the amount of change in size of partition". This occurs whether using Boot Camp or simply using disk utilities to create a new partition. Help!

Similar Messages

Boot Camp 5 Trouble installing Windows 7. Fails to install due to partition being GPT

Using boot camp 5 I created a bootable USB for windows 7 professional. I followed the instructions up to choosing which partition to install on. Once I reformatted the boot camp partition, the installer said that windows could not be installed because the partition was of type GPT. This is a 64-bit version of windows so it should be able to be installed on a GPT partition. Any help is appreciated.

You don't have to install Windows in a GPT volume. Boot Camp creates a FAT partition that makes Windows detect the hard disk as MBR, so it looks like your computer doesn't support the Windows installation with a USB drive.
You can only install Windows with an external disk if your computer didn't come with a SuperDrive. Your MacBook Pro came with the SuperDrive, so you have to install Windows with a DVD

Could I reinstall OS X partition keeping the windows boot camp partition?

II have a OS x partition that need reinstall. In the same hd I have a Windows Boot camp partition. The question is, could I reinstall OS X partition without affect the Windows partition?
Thanks,
Jorge.

Sometimes it works, sometimes not.
Of course you should backup both.
Q: why do you think OS X needs to be reinstalled or something?
Disk directory trouble?
Because 3rd party disk utility can do better, as well as maybe clone Mac volume so you can boot and do more repairs.
Or maybe the partition table is shot. Or bad sectors. And bad sectors can require a full format.
In a perfect world, but disk drives and systems aren't

Black screen when installing Windows XP on new Boot Camp partition

I just upgraded my iMac Intel Alum to Leopard and used Boot Camp to create the Windows partition. When I try to install Windows XP from the install disk, I just get a black screen with a blinking cursor in the upper left corner. Is it having trouble finding the Boot Camp partition for the Windows install? Everything else is working fine. Leopard still boots okay and everything works in Mac OS - I just can't get to the next step of installing Windows.
Thanks in advance,
David

When I say disk image, I mean a copy of a friend's Windows XP install disk . Even though it's a copy, it boots a PC fine. Any reason why it wouldn't work on the Mac?

The Invisible Boot Camp Partition

Basically, my Windows partition does not show up on my Mac side of things.
It shows up in Disk Utility as "disk0s3" but is not mountable. It cannot be mounted if I use the MacFuse and NTFS-3G solution. It cannot be mounted with Paragon's NTFS for Mac OSX. If I open up VMWare Fusion it detects a Boot Camp partition but cannot run it saying instead there is not mountable device. Also, in System Profiler, the partition does not show up under the Serial-ATA section where my OS X partition does.
That being said, Windows runs fine with no issues that I've found.
The way I had to install it was via a work-around since I'm another one of those people who could not format my partition during the installation process. Instead I partitioned via Boot Camp, then used an Ubuntu disk to format the volume to NTFS and install Windows, which worked perfectly sans the OS X side of trouble.
Does anyone know what I can do to fix this problem be it either reinstalling Windows another way or may figuring out why OS X can't see it?

Solution: Remove the volume and reinstall windows via another method. Hopefully 10.5.2 will fix the Boot Camp issues...

Restoring Boot Camp Partitions...

Hi,
A While back I Partitioned my main hard drive and created a boot camp partition. Now that i'm done using Windows on my mac, i'd like to restore my drive to one partition WITHOUT losing all of my data. Now, Boot Camp Assistant makes it sound as though this is possible and I have heard from others who have done this however i'm a little unsure and would just like to confirm that this will not destroy all of my data on the Mac OS X side of the Hard Drive.
Mac OS X (142GB) - Windows (5GB) = Mac OS X (147GB)
Above is the basic process i'm imagining.
Can anyone help me out?
Thanks,
Nigel

Backups should be automatic and require only setting up once. So really are no brainers.
Cloning is not formatting, installing etc. Though it might require RTF once in awhile.
It is the folks that don't that get into trouble.
Disk Utility RESTORE or Carbon Copy Cloner, along with (essential) one drive. You would be surprised at the problems people post, and how much can be avoided.
One guy just killed his Mac Pro system disk and wondering what to do.

How can I get Lion to recognize my boot camp partition.

Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
Is there any way to get the boot camp partition to work?
I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

Boot Camp partition not showing in startup disk or when holding alt key

I've read countless discussions about similar questions to this one, however, I still haven't been able to find any solution.
I have an old 2006 MacBook that has just been fully updated and reformatted. I'm running OSX 10.7.5 and Boot Camp 4.
I went through the Boot Camp installation from an Windows ISO image in my usb drive, where it succesfully downloaded all files needed, and prompted me to make the partition, after which it restarted and was supposed to take me to the installation manager in the Windows partition. I first got the "No bootable driver" error, to which I read I was supposed to restart the computer, hold the alt key, and choose the boot camp partition. However, it does not show up. I only get Mac and Recover drivers.
I went into the Mac's startup disk, and only the Mac driver is showing, no Boot Camp driver, however, when I go into Disk Utilities, I can see that the BootCamp driver there.
I read somewhere that I should zap pram and reset SMC, which I did with their instructions. It didn't change anything, I still only get the Mac driver and Recovery when hitting the alt key.
Does it have something to do with my MacBook being older? That's the only reason I can think that would not allow me to do this.
Let me know what other info I can give you so that you can please help me!! Thanks in advance!

In last resort I solved my missing BOOTCAMP partition problem using a program called: iPartition from coriolis systems located in the United Kingdom http://www.coriolis-systems.com/iPartition.php it took me a coupleof days to figure out the credit card system they have Hint: use your 9 digit zip code to find your credit card address and call your bank if you have an overseas hold on the card!!!! The program found my missing BOOTCAMP partition and restored it. It did take a couple of e-mails to learn to use their program. Let me know how you turn out!

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

After Boot Camp partition, iMac no longer boots

Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
Thanks for your help, everyone.

On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
On the next reboot it should automatically boot into Windows.
A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
Stefan

Can no longer see Boot Camp Partition

Hello all,
I was having problems with booting into Boot Camp/Windows 7 (I was just getting a black screen), so I attempted to delete the boot camp partition and reinstall it. When I did that, the program hung for a while, and finally said there was an error deleting the partition. However, it appears it like halfway deleted it, as it no longer shows up! When I go into disk utility, Macintosh HD shows blue, and then there is a 50 GB partition (the size of my bootcamp) that is white, but it is unlabeled. I cannot adjust the partition to make it the whole HD, and if I go to boot camp assistant, and try to make a new bootcamp partition, it bounces back with an error message as well. I am wondering how I can restore the partition back to the original all mac hd partition..ANy help would be greatly appreciated!!
Kevin

WinClone 3 $20
When you move to a new OS: clone your system, make sure you have backups you can use - for each - the partition table "rules" change with each new OS. And you want to reformat a drive from time to time especially then.
Carbon Copy Cloner 3.4 is a good way to clone your OS X partitions.
Basically, "start over" and restore to one HFS volume with OS X then run Boot Camp Assistant, then restore with Winclone image you made easier.
www.apple.com/support/bootcamp
Find CCC and WinClone www.macupdate.com

Boot Camp Partition & Windows Vista - Disk format Problems

When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
How do I get Boot camp to format the partition correctly?

Read the instructions that come with Leopard Boot Camp. The partition is automatically formatted at FAT32. However, it's a) not bootable (Windows has to do that) and b) Vista requires NTFS. That means once you're in the Vista installer you need to REFORMAT the partition. Select the partition, and then click, umm, disk options I think. Then reformat the drive. If you do that you should be able to continue.
100years wrote:
When Boot camp partitions the disk (I chose 25gb) it automatically formatted it as FAT32. However, when installing Vista, it says that it requires the disk to be formatted as NTFS.
The Boot camp instructions says I should be given the option which format to use, but no option came up. I don't want to partition more than 32gb.
How do I get Boot camp to format the partition correctly?

Boot Camp Partition no longer shows in StartUp Control Panel

My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
Any suggestions?

Hi,
if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
(Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
But as long as the Option-key is working maybe you can live with it.
Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
Regards
Stefan

How do install windows hard drive (from dead pc) into boot camp partition

My Windows 7 desktop died recently, so I took the opportunity to buy a Mac Mini (latest version as of Feb 2012) as a replacement. I want to transfer the Windows 7 installation (from the dead PC) including all applications, accounts, settings, user files, etc to the Boot Camp Partition. Can someone please provide the steps on how to perform the Win 7 migration to the Mac Mini.

Just to clarify:
I want to install the Windows 7 installation from dead the PC into the Mac Mini's Boot Camp partition.
I installed the PC's hard drive into an enclosure and connected it to the Mac Mini via the USB port.
What I want to do is the following:
1) Do a Windows 7 "fresh" install in the Mac Mini Boot Camp partition.
2) Migrate all the applications installed on the Windows 7 PC and their associated data.
3) Migrate all user accounts and data.
Is there a tool that can transfer all applications and user accounts from the Windows 7 Hard Drive to the Boot Camp partition on the Mini?
Based on the documentation the Window Migration tool is Lion OS utility and does not perform a complete migration of all applications installed on the Windows machine.
thank you.

Boot camp partition trouble

Similar Messages

Maybe you are looking for