Boot Camp Problem. Won't recognize 10 gb free space. HELP!

I recently came to the conclusion that all pc games will only run well through boot camp. I've opend the app before and have played with it before but not acctualy run the whole thing with it. I open up the application and hit continue and select the windows support software download and hit continue. A small messsage pops up saying I don't have at least 10 gb free, even though I have 20 gb free. Please help!
Thanks

Free, contiguous, unfragmented, AND your OS X HFS+ needs 10-20%, 20GB of free space, left.
The minimum for XP may be 10GB, but the minimum for Windows 7, which is all that Boot Camp 4.0 Lion supports, is more like 48GB.
Upgrading to SP1 and all the other patches can require 9GB free temp space.
your page should be 4-8GB
hibernation file would be 4GB or whatever RAM you have installed
Windows cache can take 1-3GB
A 48GB partition is probably reasonable size - the minimum that Apple and MS list of 20GB is way too small and does cause nothing but trouble.
Apple Boot Camp Support
Boot Camp 4.0, OS X Lion: Frequently asked questions
create a Windows support software (drivers) CD or USB storage media

Similar Messages

Boot-camp assistant won't recognize my DVD-RW

So I have put a DVD-RW on so it could burn the Windows 7 to my DVD. I've seen a lot of answers to this question but it doesn't quite work.
I've a iMac 21' and tried to do this quite many times. What I do is I put the DVD in, start installing and then it automatically burn the DVD for me, but after I chose the partition for the Windows it won't install it further and gives me a error about my DVD is not inside and it takes a few seconds for it to recognize the DVD, but I've been waiting for a long time. Any solutions?

The "lot of answers" all usually have one thing in common:
Burn Windows 7 or 8 ISOs are the slow 2x speed possible w/ verify.
Anything else with using Disk Utility to do the burn or even BCA do fail.
Copy the ISO to your disk and try using that to write the ISO to (another) USB device.
Instructions for the Air: https://support.apple.com/kb/HT4407
download a free iso burning program for Mac (we used SimplyBurns Mac).
That program runs you through the necessary steps to properly burn the iso file you need.
After doing so, Bootcamp recognized the installation file and everything worked as it should.
https://discussions.apple.com/thread/3410900?start=45&tstart=0
http://simplyburns.en.softonic.com/mac
If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO:
http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
Here's instructions on burning an ISO with Disk Utility:
http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
And this thread on burning a Windows DVD in OSX:
https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)
Boot Camp Support:
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Support Communities Discuss Boot Camp topics with other users.
https://www.apple.com/support/bootcamp/
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc.
The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc.If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed WindowsLogo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New HardwareWizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed WindowsLogo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc.
2 Quit AutoRun if it opens.
3 Using Windows Explorer, locate the driver that you want to reinstall.
4 Open the driver to start the installation.

Boot Camp Assistant won't work - keeps asking me to use Software Update.

I am trying to use Boot Camp to install Windows but my Boot Camp Assistant won't work - it keeps asking me to use Software Update. So, even though I know everything is up to date, I start Software Update and it confirms that indeed everything is up to date. I try Boot Camp Assistant again, but the same message appears. I search every possible Boot Camp upgrade to download from Apple but they are all .exe files and need Windows to run, so those don't seem to be what I need. So I am caught in a circle of nothing working. Figures - the ONE weekend I need to install Windows and use a Windows-based program!!! And of course Apple support is closed over the weekend - another great asset to spending thousands of dollars on a product. ANY SUGGESTIONS?

I too am having a similar problem. I am trying to install Windows in a newly created Boot Camp partition. I have Windows 7 but Boot Camp Assistant only mentions XP and Vista. I put in my installation disk of Windows 7 but it refuses to install it. My OS is fully up to date.

Boot Camp Assistant won't read my windows 7 professional installation dvd, HELP!!

Hi Guys,
For some reason Boot Camp Assistant won't read my Windows 7 Professional x64 Installation DVD? It appears in Finder, however there is only 1 readme.txt file on the disc in Finder. I had Boot Camp set up and working on my Macbook for almost a year but had to remove it and start again, so I can't understand why all of a sudden it can't seem to load any Windows DVD's? I even tried my Windows 7 Home Premium disc but again, the same message keeps popping up that I need to insert my installation disc and wait a few seconds for it to be recognised
Can someone pretty, pretty, possibly please help me out here in some way?

Hi Guys,
For some reason Boot Camp Assistant won't read my Windows 7 Professional x64 Installation DVD? It appears in Finder, however there is only 1 readme.txt file on the disc in Finder. I had Boot Camp set up and working on my Macbook for almost a year but had to remove it and start again, so I can't understand why all of a sudden it can't seem to load any Windows DVD's? I even tried my Windows 7 Home Premium disc but again, the same message keeps popping up that I need to insert my installation disc and wait a few seconds for it to be recognised
Can someone pretty, pretty, possibly please help me out here in some way?

Boot Camp problem + General partitioning

First, the Boot Camp problem
I don't know exactly how to explain, but I kind of made the partition and restored them into one single startup disk, for several times. It was OK for the first few times, but then it required me to run Disk Utility (from startup) to repair the disk before I can partition. It happened for one time. But after that, it started to ask me to back up the hard disk, format it, and restore it, then try Boot Camp again. So, the ending of the story is I can never do boot camp again now because I wouldn't waste at least 70 quid for a hard disk large enough to back up solely because I need to run Boot Camp. Is there anybody here know why this is happening? And, eventually I think I'd have to buy an external drive and back up, format, restore, then run Boot Camp. But doesn't it sound dumb and familiar? This is exactly the ONE AND ONLY way to fix any problems in a PC. Aren't macs supposed to be far better than PCs? Why do we have to do what PC users have to painfully do? I hope somebody here can come up with a solution that doesn't involve "backup>format>restore".
Second, the partitioning,
I came up with an idea to solve the above problem. But I don't know whether it actually works, so I'm seeking for advice. I was hoping if I run Disk Utility from start up, make two partitions (or more) for the mac HD, one HD being the one holding all the data, and the remaining being empty. Then I can format the empty one (which seems rather redundant), and do the Boot Camp thing on this partition. However, there are two points I have doubts with. One, if I split my current single mac HD into multiples of partitions, will any or even all my data be lost? Because I can only specify how much to partition, I wouldn't have the chance to "tell" the computer to keep all existing data on one partition. Two, I know that Boot Camp can run on an external HD, so is it possiible to run on a different partition?

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

Cannot sync my ipad . . . keep getting message " requires version 10.6.3" or later . . . I've already downloaded 10.7 to my mac . . . won't recognize Ipad either . . . help

Cannot sync my ipad . . . keep getting message " requires version 10.6.3" or later . . . I've already downloaded 10.7 to my mac . . . won't recognize Ipad either . . . help

I'm having a similar problem. Perhaps more complex. I just downloaded the 10.6.3 and it didn't solve the problem for my iPhone 5.
I have the new iPhone 5 and iTunes is asking for iTunes 7.0 in order to recognize the phone. I tried to download iTunes 7.0 but an error comes up stating that I need the 10.6.8. Well I tried to download the 10.6.8 and an error message came up saying that I need minimum of 10.6. So now I'm confused....
These are the error messages in order.
1. The iPhone “iPhone” cannot be used because it requires iTunes version 10.7 or later. Go to www.itunes.com to download the latest version of iTunes.
2. This update requires Mac OS X version 10.6.8 or higher.
3. This update requires Mac OS X version 10.6.
Will I have to pay for the 10.6?
Thanks so much in advance.

Boot Camp Assistant refuses to recognize my Windows 7 Installation Disc nor my USB

I have an iMac 20inch, early 2008 model. Back when I was running Leopard I installed Windows 7 with Boot Camp from a Windows 7 Installation ISO my friend had and I burnt it to a DVD and installed it without any problems. Later, after I got tried of windows, mostly because Windows really blows unless you want to game (which is what I was using it for), and I had contracted a virus, so I deleted Windows along with my partition after backing up any data that I though I might be able to use later. Now I am fully upgraded to Lion 10.7.2 and I downloaded the Windows installation drivers and whatever else Boot Camp persuades you to download and now at the step where I choose how much of my hard drive I want to partition, after I click partition, Boot Camp refuses to recognize that my installation disc is there no matter what format I put it in. I have followed every instruction given to me and nothing has worked. I'm thinking about trying to just partition my hard drive in Disc Utilities and formatting the new partition and then copying the ISO to the partition and seeing if it'll boot up.
Anybody have any better ideas, or solutions?

Well I have tried downloaded a Windows 7 ISO, and tried mounting it on a USB flash drive and booting it from the USB, but that didn't work either (I heard that my version of OS X doesn't support that anymore because I already have an optical drive.)
BTW - what do you mean exactly by running disk utility on the DVD drive?

Boot Camp Assistant Won't Work....

I've been wrestling with this for two days now (along with my very technically adept brother). I'll try to offer as much information as possilble. I've scoured this and other online forums without success. Here goes:
Early 2011 MBPro/ 7500rpm HItachi dry/ OS 10.8.3 / no updates in queue....recent clean install of OS at Apple store ~2 mo. ago (due to battery issue).
Placed BootCamp partition on mac ~6/ 2012....easy install and worked flawlessly. Used Amazon purchased legal copy of Windows 7 (64 bit OEM System Builder Pack, CD which included Service Pack #1; purchased sometime early 2011). Downloaded all required updates (then and with continued booting into Windows). Installed Stream/ Origin and 4 games (CoD, Portal etc.). Worked fine without a hitch. Two Mac side extensions added for use: Boot Champ for quick changing of OS and gfxCard Status (to control Mac OS side video card choice). NO PROBLEMS with extensive use!
This week: exchanged out Hitachi driive with Samsung SSD (512gb 840 PRO) after extensive online research (in particular MacOS Rumors which has long thread for this SSD. Note: Apple uses the Samsung 830 series SSD in rMBPs). Used CCC (CarbonCopyCloner). Single partition/ Mac OS Extended(Journaled).No problems with OS and SSD. Went to set up Boot Camp partition (note; NOT to reinstall windows; I just want the partition to WinClone my partition contents from the Hitachi over to the Samsung. Many on other sites using the same SSD have been able to do this....some have had issues akin to mine. Problem: BCA (Boot Camp Assistant) only offers two options: download Windows software (drivers etc.) or re-install Windows 7. I of course I only need the first. However, after (~20) trys the download still hangs (~half/way). When I quit and check the target USB: empty, not even fragments. Have tried with at least 6 USB (8gb) drives of 4 different manufactures....no change. Have reformated the USB drives (MS DOS/Fat32 ...all Disk Utiilty offers) no change. Was on phone with Apple Technical today, tried a few things but couldn't get the download to perform (removed all other USB devices from MBP/ tried using Ethernet to router etc. ..) They will get back to me tomorrow. NOTE: Apple Technical DOES offer BootCamp Support!
Have tried using my Win7 disk to make .dmg and converted it to .iso and place iso files on desktop and into destination USB drive: no luck
Tried to use my Hitachi as start-up disk then try to partition the SSD: no go
Tried to use my original OSX.6 disks.....won't take/ work on my MBP now (I think due to previous firmware updates).
Saw some tidbits online that since I had first used BCA that Apple had revised it and its options?
One thing that my brother and I noticed: when he tries to use BCA on his 2012 rMBPro (Samsung 830 SSD) he is offered a third ( the first ) option: ' Remove or resize (?) current partition'. May just be because he already has a partition and I don't.
I will post other 'tries' as I remember them or try them. I suspect that at the end of this road a 'clean sweep/swipe/re-format/ re-install' etc. may be the last attempt but I've seen enough of this issue on line that a simple process (if discovered) would come in handy: many of us often change out internal drives and will probably continue to have Boot Camp partitions ( also: my SSD was placed on the 6gb supported SATA as the original HD).
So: any ideas, suggestions or (online forums to check )etc. would be much appreciated .....and not just by me!
Sorry for the long post but wanted to give as much information on the first pass as possible.
Thanks.....

Follow up:
Used WinClone to make image of my Boot Camp partition form former internal HD (conneceted via USB /2.) Very slow/ but if you track with your cursor you can see slight change, took about 2-3- hrs. Note: told WinClone REPLACE BCD file ( 1 of 2 options given during image production(see notes at WinClone site).....
Previously, and now, did not use (from WinClone site; 'twocanoes') instructions to use ' Sysprep' program in windows prior to making my image (had been reading from a different instruciton set).....
Sequence:
1. PRAM reset (at least 3 consecutive times/new USB drive).
2, Created partition..Did NOT re-install Windows..When it asked( after it had NTFS prepared the Boot camp partition (?)..... I quit the applicatation and checked that the partition had been made (disk utility/ also...about this Mac...).
3. Used WinClone (2.4)...new USB drive...did not use Sysprep route (on 'twocanoes site' this is instructed); cloned from 'Boot camp' icon deposited on my desk top when I mounted my old HD using USB 2 .
4. Did not 'keep' Memory Caches' when offered prior to imagining ...
5. Saved boot camp image (image on new SSD drive from former HD drive via USB 2 (former drive showed
'MacHD (or whatever your name is for your drive ) as well a 'former' BootCamp drive Icon.
6.Took awhile....restored to new Boot Camp Partition via WinClone instrucitons.....
And: Worked. No Window Id or or authetication asked for ; Windows desk top looked identical as from previous HD; STEAM and ORIGIN immediately updated....chedkced into each for a game : all settings perfect....not asked to ID or change anything.....just faster!
Hope this helps someone.....!

OS 10.5 - Boot Camp - Windows won't read Mac Disc for Driver Install

Hello everyone.
I have been through half a dozen headaches and a dozen hours of time wasted on this problem. I've tried multiple windows discs untill finally I bought a brand new version of Windows XP Pro. I've followed all of the instructions in my printed boot camp manual and I continously run into one problem:
Once windows is installed completely and I am at the windows desktop and need to eject the windows disc and insert the leopard disc to install drivers, I do so and windows does not recognize the mac disc whatsoever. It says the drive is empty, it is 0kb of 0kb, I cannot explore the drive, I cannot do anything. If I open it it is blank. I cannot access the internet in any way on windows because there are no corresponding drivers.. so I am at a loss.
Can anyone please help me? What do I do? I really apologize if this question has been answered, but I could really use some help.

Hi Sotaris,
It's a little vague what you mean by the "leopard disk". Do you mean the disk of drivers Boot Camp burns, or the actual Leopard installation DVD?
What you're supposed to do is launch Boot Camp while booted to the Mac OS. One of the first things it does is create a CD of Windows drivers that XP will need for your Mac. So you must have a CD-R or CD-RW on hand.
After that, Windows XP is installed. When that's done, there will be a number of hardware components that XP naturally doesn't recognize. That's when you insert the driver disk Boot Camp creates. I may have listed the order of things a little bit off here, but the main point is it sounds like you're skipping, or missing the part to create the Windows driver disk and trying to put the Leopard DVD in the drive.

Installed XP; Boot Camp drivers won't work.

Everything has run relatively smoothly up until i have to install the mac drivers on XP.
I installed them successfully using a leopard disk, and then the computer restarts.
Briefly before shutting down, a blue screen shows up for about one second with a bunch of data; something about an information dump (doesn't seem too out of the ordinary, but I'm mentioning it just in case).
Then the computer restarts into windows, and says it has to perform a disk check or something... it says "Press any key to skip," yet at this point not a single key on my keyboard works, so i can't skip this step.
Then it goes through a bunch of diagnostics; windows boots up and i get an error report that says software is trying to access potentially personal information, such as wi-fi rights, and other things boot camp is supposed to take control of in order to make them function.
The next step in the installation, "After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (windows XP only)," never shows up
I presume windows thinks that the boot camp drivers are a virus, and thus won't let me install them.
I do not, however, know how to fix this.
Can anyone help ??????

I had problems with the ethernet and sound drivers following the most recent bootcamp update, which installed to deal with the trackpad issues that I was having. A pretty big mess, and the guy at the Geniius bar was very nice about saying he couldn't help.
I have discovered a repeatable problem with the update. If I completely uninstall bootcamp, and reinstall from the CD before restart, the sound an ethernet work again. I would be afraid that nothing would work (like the CD rom) if I restarted in windows sans drivers. Repairing/updating from the most current update (2.1.1 (?)) available kills both sound and wired ethernet. Repeat the procedure, and everything is fine again.
Interestingly enough, the trackpad issues seem to not have reappeared.
Opinion: the 2.1.1 bootcamp update is a downdate for my new macbook, and if I have any more issues like this that kill several days, apple is going to get it back. "It just works" clearly doesn't apply to mac running windows, and for those of us who have no choice, for whatever reason, that may continue to mean no apple.
For what it's worth, one of the guys at the genius bar said a lot of his hardware didn't work in windows either. I predict an update in the future. I hope all of this gets resolved, because there's a lot to like about the mac, but the whole non-support of windows thing is a bummer and could be a showstopper for a lot of people, despite the fact that bc is advertised as a reason to switch.

Boot Camp problems with Windows 7, and a new Macbook Pro

When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
1. No sound with my new Windows 7 64 bits.
2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
Please help.

Windows Boot camp drivers won't install

So I'm trying to put windows on my mac again, for the fifth time since windows won't let me activate it anymore. Everything goes fine and it installs and I put the Mac os x install disc 1 in to install the drivers. It loads up and goes through the process of installing the drivers. Once its down it asks me to restart the computer which I do. Once I get in however, none of the drivers are installed like nothing ever happened. I can tell because I can't get internet and the trackpad won't work properly. The boot camp faq shows up and another window to update something shows up but it need the internet to work. I go and try to repair the drivers and it runs its course, restarts and still nothing! No drivers. I've tried deleting the drivers and reinstalling them, removing the partition and reinstalling but nothing is working. I've gotten the drivers just fine before but now they just won't install. I've updated my mac from 10.6.4 to 10.6.7 so can that be the problem? Its the only thing I did different.

I'm at my office at the moment and I don't have the disc to view. Tell me, have you found the drivers folder? You can select any driver and it should automatically open boot camp and install all "Apple Drivers" while in windows mode. Then after installing bootcamp, you can install Apple updater. I'm adding more than I should because I don't know how far along you are- if you look around the clock area in windows, you should see a boot camp icon; is it there?
Send me a screen shot with your disc open and I can maybe help you from there. [email protected] Otherwise, I will look at the direct path this evening and post the info here.

Boot Camp - Windows won't install

Hi,
I'm running OS X 10.10.2 on my iMac 7.1 (2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM). On completion of Boot Camp partition Windows 7 DVD won't install - I get a black screen prompting me to select boot mode. However, keyboard and mouse are disconnected at this stage leaving me powerless to do anything. There's nothing wrong with the Windows 7 DVD, I might add - installs perfectly when running Parallels Desktop 10/Parallels virtual machine. Can anyone tell me, how to resolve this annoying issue?
Regards missil1

missil1 wrote:
Hi CellarDwellr,
Thanks for your answer.
Although my install DVD does indeed bear the "OEM" mark, I don't think the "OEM" is the root of the problem, as the DVD installed perfectly on my iMac by means of Parallels Desktop 10. Furthermore, I made a perfect and smooth installation of Windows Vista (OEM DVD) on my iMac some years ago by means of Boot Camp (running Snow Leopard at that time).
Hence, I'm inclined to suspect this to be an OS X issue rather than anything else.
Finally, I did comply with the Boot Camp manual on both occasions.
Regards missil1
You can't just compare your windows 7 oem to your old windows vista oem. There are many - probably hundreds - of oem versions out there. You probably have a limited notion of what "oem" stands for. An OEM version of Windows is a special version for a specific computer or models of computers and none of them are for Apple. Dell or HP might sell OEM versions of windows, tailor made to work with their models of computer. Which means they preinstall drivers specific for, say, a Dell Studio laptop. Often they will also force a partitioning scheme on a computer's harddrive as well. If it worked in Parallels, you were lucky.
If you want to try Boot Camp again, use Boot Camp-assistant to delete your Boot Camp partition and start over.

Boot Camp problem ( or soo I think)

Here's the deal.
My Boss ask to install Windows 7 64x Professional on his IMac 27'' later 2013. I read a little bit in some articles and figure out that the best ideia is to use the boot camp assistent.
This was my first time using, did every step slowly and see many video tutorial. When every thing was set up, the boot camp partition was ready, the usb stick was ready, I run the windows stick usb, came first in the language menu, setup that, and after appear this screen
I tried to rescan and don't find none.
So I browse the wininstall files and find the " drive " but it won't accept.
and now I'm here, thinking with my self if this is a problem with boot camp or with me ^^''.
For more detail I'm using a kingston USB model DTSE9 16GB.
And boot camp version is 5.1.5640
Mac Os Marverick
If I'm not in the right thread or topic could some one say where I need to post this or to find some answers... I'm total newbie when it comes to Mac Os.
And I'will anticipate thanks for the colaboration ^^

It was indeed the S.O but occurred another problem, I can't seem continue after format the boot camp partition on the windows install setup.
I read a little bit about this and found it's because the 3TB HDD can't make the GPT partition, soo I'tried make a MBR but I can't resize the partition because of the fusion drive.
Any suggestion ?
I look a post talk about use a image generated by winclone. Would be a problem if I use a Mac Book Pro to make the windows partition boot camp and clone in the other IMac with the winclone, or Am I talking nonsense ^^''.

Boot Camp problems

I know there is a forum for BC, and I've posted this in it, but I'm desperate for a solution so I'm posting it here too, sorry if that upsets anyone!
On a Leopard Macbook I ran the Boot Camp assistant and then the MB asked for the XP disc. I have a genuine educational distribution copy on disc with both XP Home and XP Pro, I've used it on other machine no problem, including a MB under Parallels. When you first insert the disc you first have to selct which version you want, A or B, then hit enter.
My problem is that after inserting the disc during the Boot Camp assistant as soon as I get to this screen the keyboard is not working, neither a bluetooth one or the MB's own, so I can't get past this screen.
I decided to scrap the idea of installing under Bottcamp and stick to Parallels but now the machine is stuck at this selection page. Even if I attempt to boot to safe mode it won't and after the gray screen the MB returns to the XP selction page with no keyboard working. I also can't remove the XP disc.
Please help, it's my last day in work, I've stuff to do and now the **** machine won't play ball.

Try holding down the trackpad button while turning on your MacBook. This should eject the disk.
The problem with your disk may be that you have to have XP with service pack two on the disk for bootcamp. If it doesn't see that it gets confused. I have seen on the net a way to make this disk from a regular copy. If I can find it again I will post it.

Boot Camp Problem. Won't recognize 10 gb free space. HELP!

Similar Messages

Maybe you are looking for