Boot Camp supported by the MacBook (Late 2008)?

I've skimmed the Boot Camp discussion forum and couldn't get a clear answer. Does Vista run well w/ the new MacBooks, I'm guessing there may be driver issues? Are the Boot Camp drivers that come w/ the laptop any more current than the 2.1 drivers that have been out. What are your experiences w/ Vista on the new MacBook so far. I would love to hear people's impressions and experiences. Thanks

I have the same problem, but my original disk from Apple was a bad Apple, and I WENT TO WORK IN BRAZIL and can't even get any help from an Apple store.
Does anyone know where to download the .exe file for the new macbook? Apple posted previous files, but I can't find for the new 13" aluminum. So I have no network, no fast graphics, nothing.
HELP IF YOU CAN I'M FEELING DOOOOWWWWN! (Copyright Apple Records)
Seriously, please help!

Similar Messages

Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?

Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the hard drive does not appear in the DU sidebar list then it has died and will have to be replaced. No need to proceed beyond this point.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Are the boot camp drivers on the Macbook install disk only...

...for the macbook? Or does it have the drivers for other macs too like the imac.
Thanks

Thanks in bunches, guys. Almost everything is working, I need help in one more things that's driving me nuts.
I've been able to install sound, bluetooth, and I'm able to do a right click. But for some reason, I still can't scroll and the buttons on the keyboard (i.e. the eject button), still won't work.
There are two trackbad drivers. One is called multitouch and one just called track pad. Which one of those should I install?

Why is there no Boot Camp support for the 64-bit version of Windows 7 on the 64-bit iMac that I'm using?

The early 2008 24" iMac 8,1 has a 2.8 ghz E8235 Intel Core 2 Duo processor with a data width of 64-bits.
I am straining badly to understand why Apple is only providing drivers for the 32-bit version of Windows 7 for the 64-bit hardware that I want to install it on.

The 64 bit drivers are there, but there have been some installation
issues depending on Windows OS and Apple hardware. You may
want to post on the Bootcamp forum to get more direct response to
your issue.
FWIW, at one point, I forget when, I found I needed to manually
open the 64 bit versions of the drivers to install them that were created
on the bootcamp driver install disk (image). As I recall the was a
64 bit .msi "global" installer but even at that there was an individual
one that needed to be manually installed.
Its been a while since I last did this since I have been doing everything
in Windows virtual machines with Parallels.

Why does Boot Camp Support Software 5.1.5621 have AMD Catalysit Control Center in its update?

Before this Boot Camp Support software, the included drivers were for Intel. I have an iMac with Intel i3. But with the software update, it doesn't include a driver for Intel but instead AMD. That doesn't make sense. Anyone know the issue?
Thank you

I was told to just buy OEM copies but my frustration is that I'm already $200 in OS's because of the information that was provided to me by apple personnel and told by a senior tech that this still can be done.
So to say I'm going to be S.O.L and spend another $100 (for a total of $300 and 2 OS's that are usless to me; because the first time i was told that i could use Windows 8 and when the drivers did not work i was told that Windows 8 is not supported by boot camp drivers at this time so i have to go buy windows 7) I might as well return the $2,500 system and just go back to PC and get a $900 dollar PC system.
I will continue to work with the senior tech that i'm currently working with because the other issue is that OSX 10.8.1 will not except the OSX 10.8.2 update stating that it is not supported by OSX which i was told "that's strange"

What is the correct boot camp support driver for late 2009 Macbook for windows 8.1

I have late 2009 Macbook with OS X 10.9.4. I want to run boot camp for windows 8.1, but unable to due to the fact that it can only run Windows 7. What is the correct Boot Camp Support Software so that I can run Windows 8.1?

Thanks for the info, but unfortunately there is no current support software or update for my issue at this time. I found the information under Boot Camp: System requirements for Microsoft Windows operating system. Hopefully Apple will fix this issue promptly!

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo without the original CD?

When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo with snow leopard without the original CD?

Hi,
apart from the MacBook Air this feature is of no use for other Macs right now.
Simply ingnore it (click "I already have the Drivers...) and continue with the installation.
Sorry to say but you need the OSX Install DVD for the BootCamp Driver installation.
The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
Later updates (3.1 and 3.2) can be downloaded from Apples Support website.
Call Apple and ask for a replacement and they usually send you one for a small fee.
And have the Serial-Number of your Mac at hand when calling.
And since the OSX Install DVD can also be vital for maintenance and repair it is best to have one.
The needed BootCamp Drivers are on the OSX Install DVD 1 that came with your Mac.
Insert that disc while in Windows after the Windows installation to install the drivers.
Regards
Stefan

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

HT5634 Boot Camp support drivers install unsupported MacBook Air 11inch

I successfully installed WIndows 7 64bit from a USB on my 2013 MacBook Air 11inch and it seems to function properly. When I tried to install WIndows support software I keep getting "Boot Camp x64 is unsupported on this compter model" message. The Boot Camp support site states that this install is supported using Boot Camp 5 (which is the version I used). I've found a few workarounds on-line that mention doing something via the disc in the CD/DVD drive, but I didn't go that route so I am unsure how to proceed. Anyone have any guesses on how to make this work?

This sounds weird to me. I just installed 64x on your model macbook air at work today and everything went off with out a hitch. Perhaps you could try to redownload the drivers from boot camp assistant? I have had issues occasionally with boot camp drivers and redownloading usually works out for me.
Best,
Stuart-

Is it possible to upgrade the graphics card in my aluminum 13-inch Macbook (Late 2008)?

My 13-inch Macbook (Late 2008) currently uses the NVIDIA GeForce 9400M 256 MB graphics card, but I want to upgrade it, so that I can play games at a higher quality. Is this possible? If so, what graphics cards are compatible with my Macbook (Late 2008)?
Thank you.

The graphics card on a MacBook is part of the logic board not a separate card so it can't be upgraded.

Do I have all the parts to replace my HDD with a new SSD on my Macbook (late 2008)?

Hey everyone, I am trying to figure out if have all the parts to replace my hdd with a new ssd on my macbook (late 2008 aluminum).
I just bought a crucial mx100 SSD and plan on replacing my mac HDD. I have the appropriate screwdrivers, and a bootable OSX on a usb drive. I also purchased a sabrent usb 2.0 to sata/ide hard drive adapter.
How do I replace and install OSX on my new SSD?
From what I read here are the steps I'm planning on taking.
1) Detach the old HDD
2) Attach new SSD.
3) Turn on computer and use the bootable usb drive to install OS X.
Does that work, I think I read somewhere about maybe formatting the SSD before I can use the bootable usb. Any input or help would be awesome. Thanks.
I'd prefer to do a clean install of yosemite and not carbon copy my old HDD

Hi Bradtk24,
On this site you will find the requirements for the physical change that you want to make.
These pages will give you insight into the processes required for the software side of things. It might be slightly dated, but the principles remain valid.
Have fun
Leo

While at boot camp assistant, Downloading the windows support software stalls

From a long time windows user, I was persuaded to migrate to mac and am quite lost. While using boot camp assistant, downloading the windows support software just stalls at 20%. I tried using alternative drives, USB, DVD and the partitioned HD of imac but still to no avail. What should I do?

No problem. For me, I spent the time downlaoding the drivers for Boot Camp 4.0 (form Lion), un-installed by Boot Camp 3.0 because it wouldn't upgrade, and then learned that Boot Camp 4.0 didn't support my old MacBok Pro. I had to go back and install 3.0, then update to 3.1, 3.2 and finally to 3.3. That took me about an hour and a half... Oh well, at least I already had most of those on disc ot downloaded...

Does my macbook late 2008 support gigabit internet

does my macbook late 2008 support gagabit internet

Yes, all late 2008 MacBooks support gigabit Ethernet.
Aluminum unibody model specs: http://support.apple.com/kb/sp500
Polycarbonate model specs: http://support.apple.com/kb/SP5

Even though the battery in my Macbook late 2008 shows 995 charged the power adapter light continues to glow red. What do I need to do? s/w fully uptodate, plenty of ram and hd space.

Even though the battery inb my Macbook late 2008 shows 99% chrged the indicator glows red(amber?) What do I need to do? s/w is up to date. Plenty of RAM and HD. s/n W8*******1AX
TIA
<Edited by Host>

Might be the adapter > Apple Portables: Troubleshooting MagSafe adapters

Can't create boot camp partition on new macbook pro

Hi all. Having an odd issue installing boot camp on my 2011 Macbook Pro. When I try and create a partition it gives me the following error message:
"The disk cannot be partitioned because some files cannot be moved."
It goes on to tell me that I need to reformat my drive and try again. Seems a little extreme and even worse, I'm wondering if this will work considering that I still have over 600GB of free space available on my drive. Thought I'd post here and see if anyone has had a similar issue before harassing support.

If you look at the pdf guide in Boot Camp Assistant, step one is to backup. Common sense before altering, installing new OS, and should be required of anyone even if just updating Mac OS.
Now, having fragmented space: Apple never considers defragging free space and says Mac OS X defrags some files, and that having more than 25% free should not impact Mac OS performance.
So I think that covers Apple support for their own OS.
When you install updates, applications and such, the patches are compressed, expanded, space is fragmented, and some vendors often choose to write their updates to the far end of the drive in order to leave high access for other portions.
the best and perhaps only way to move files is to boot from another hard drive, rather than pick yourself up by your own bootstraps and try to shuffle files.
I would never recommend using only built in tools. I don't advise Apple DU First Aid as the sole utility for maintenance and repairs for Mac HFS file system. nor would I use TimeMachine alone. They are free and there and better than nothing.
Create a bootable backup clone of Mac OS for one.
Repair your internal drive.
Try using Boot Camp Assistant; or iDefrag; or Paragon CampTune (yes, it can be used to install Windows partition as well as resize partitions now or later if needed). Does a better job.
The use of x86 Intel cpus opened up new possibilities. Some unintended or not foreseen I guess too. A competition challenge to see who could install Windows on a Mac first and easiest took place in 2006. Apple came in later with their beta. but Boot Camp Assistant has always been a weak, lame, partitioning tool.
Macs and users using gparted and other tools? and try to stop the hand-holding concept? unlikely.
A better tool? there should be, and not only that, it really needs to just be rolled into Disk utilty as one more feature and tab along with other tools - so integrated and if you want to create, resize, remove an MBR slice and Windows partition, you can.
Paragon lets you create a partition, and also they have their own NTFS driver so you don't need to format BOOTCAMP (MSDOS/FAT32) during the install phase later.
Of course installing Windows in a VM doesn't have all the trouble of dual boot native install and given RAM and processor resources, can be more than functional enough for many.
With Windows 7 you can install and have a Windows-only computer, remove all traces of Mac OS (and boot OS X off 2nd drive, either with two SSD + hard drive or eSATA or Intel 'Bolt' interface as well as FW800.

Boot Camp supported by the MacBook (Late 2008)?

Similar Messages

Maybe you are looking for