Boot Camp Update 2.1 will not run
I'm trying to install Windows XP on my Intel Macbook. It's a legal copy purchased from Microsoft so no trouble there.
The Bootcamp Assistant worked fine and the Windows install worked fine. I'm now at the point of trying to install the Boot Camp drivers but I don't have my Leopard disc available. (I bought a an OS X Family Pack and my son currently has the discs 20 miles away.)
Accordingly, I downloaded the Boot Camp 2.1 update from Apple but it simply will not run under Windows in the Boot Camp partition. It briefly looks (1-2 seconds) as though it's starting, but then never does.
I tested the .exe file on a pure Windows machine and it runs fine so there's no file corruption problems.
I've searched online but can't seem to find any solution to this particular problem.
djrichards wrote:
Thanks for the response, Stefan.
But that's not what the Apple download page says. Specifically it says the following.
"Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS."
Hi,
I admit I haven't ever taken a closer look at that and as said to my knowledge, the 2.1 update only works with the 2.0 drivers already installed.
Just did a quick googling and couldn't find any success story of using the 2.1 Update as a standalone driver install without having the 2.0 driver installed before.
Do you have the needed Admin rights when running the update.exe ?
Stefan
Similar Messages
-
Where are the Boot Camp Update 3.3 release notes?
I got a prompt on my Windows 7 install about an update. States to go to the boot camp support page for release notes. Went to the boot camp support page and no release notes. Saw link "Boot Camp Software Update 3.3 for Windows" (http://support.apple.com/kb/DL1443) and I can download from there but again, it doesn't show what exactly is in it other than "critical bug fixes and hardware support". Then it says for more information to go to the main boot camp support page.
So where the heck do I go to actually SEE what was fixed in the release?!As far as I can find out, only Apple knows the details about 3.3 .
-
Boot Camp V-2.1 will not install
Boot Camp installation of upgrade to Version 2.1 will not install. Can anyone help me?
Hi,
Probably this reply is in the wrong post, but I just registered to this forum. I had the same problem with upgrading Boot camp to 2.1. The MAC OSX I am running is in Dutch and my Windows XP version is English. I started all over again installing Windows from scratch on the Boot camp partition. But now I did not make any changes during setup when it comes to keyboard and language support. After installation I ran the Boot camp 2.0 software from the MAC OSX CD (now it suddenly appeared in English instead of Dutch the first time), rebooted the machine and then successfully installed the Boot camp 2.1 update!
As read on Internet here and there, the problem seems to occur when there is some kind of regional setting problem or other language incompatibility.
Hopefully it helps a little (although I was not happy doing it all over again).
Peter -
Problem after Update, mosts apps will not run
After running some Apple updates this weekend, many applications on my machine no longer work. Everything ran fine before the updates. I have not installed any other new software or hardware for months.
Any one know what's going on?
The following apps do not work ... I click on them, they bounce, then I get a submit error
Firefox
Safari
iPhoto (this gets to the point of showing photos)
iTunes
The following applications do work
Mail
Terminal
System Preferences
MS Word
I have tried creating a new account and running the apps, and that does not work (in the new account, the menu bar keeps disappearing and reappearing implying the Finder keeps crashing.
Mac OS X 10.3.9
500 MHz PowerPC G3
320MB SDRAM
Running iTunes from terminal ...This appears in the terminal
% /Applications/iTunes.app/Contents/MacOS/iTunes
2006-06-19 21:21:28.548 iTunes[365] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the
data is not proper UTF-8. The file name for this data could be:
Resources/Info-macos.plist --
file://localhost/System/Library/Frameworks/CoreServices.framework/
The parser will retry as in 10.2, but the problem should be
corrected in the plist.
Bus error
Running iPhoto
This from the terminal (note, it crashed already ... thus the
'recovery')
/Applications/iPhoto.app/Contents/MacOS/iPhoto
2006-06-19 21:24:18.858 iPhoto[372] Using library:
/Users/mikem/Pictures/iPhoto Library
dbgetdatastore: shadow is un-clean. recovering.
2006-06-19 21:24:25.647 iPhoto[372] CFLog (0):
CFPropertyListCreateFromXMLData(): plist parse failed; the
data is not proper UTF-8. The file name for this data could be:
Resources/Info-macos.plist --
file://localhost/System/Library/Frameworks/CoreServices.framework/
The parser will retry as in 10.2, but the problem should be
corrected in the plist.
Bus error
500 MHz PowerPC G3 Mac OS X (10.3.9)if you are having system wide issues archive and install would be the best bet. http://docs.info.apple.com/article.html?artnum=107120 first however, you must do disk repair http://docs.info.apple.com/article.html?artnum=106214. hopefully you do not have severe directory damage. if disk utility finds errors it cannot fix, back up your info immediately. you can use a third party app like diskwarrior or techtool pro to attempt fixing the problem, and if it can't be fixed, you will have to erase and install your operating system. [ 8 ) ]
-
How can I install windows 7 using boot camp, if the partition will not format correctly?
Hi All,
I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
I have an imac and I'm attempting to use boot camp. I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8. The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition. So, I recently obtained a full retail copy of Windows 7 and have been trying to install it. I have no problem with the boot camp assistant creating the new partition, 200 GB. However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.) So I choose "format" the further format the partition. It doesn't ask me how I would like to partition this, but just seems to start. All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition." I can click on the format tab endlessly but it still doesn't seem to work. Does anyone have any ideas? I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried. It doesn't seem to help either.
Thanks in advance for your help,
DTKDavid Kaff wrote:
Yes, I choose "Format" under the advanced options screen. It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk. The selected disk is of the GPT partition style." I can continue to click "format" but i keep getting the same error.
There is the answer, right in front of us ....
Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again. -
I have a usb with 16 gb already formatted it and I just downloaded Yosemite. I just bought a brand new windows 8.1 disk, so how do I download it to my Mac so I can use some stupid Windows apps ha?
From MacBook Pro (13-inch, Mid 2010) - Technical Specifications, you have a built-in Optical drive. Is it functional?
Storage
250GB or 320GB 5400-rpm Serial ATA hard drive; optional 320GB or 500GB 5400-rpm hard drive, or 128GB, 256GB, or 512GB solid-state drive6
8x slot-loading SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Maximum write: 8x DVD-R, DVD+R; 4x DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD-R; 10x CD-RW
Maximum read: 8x DVD-R, DVD+R, DVD-ROM; 6x DVD-ROM (double layer DVD-9), DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD
You will need to burn a DVD using Disk Utility (Yosemite): Burn a disk image to a CD or DVD and use it for Windows installation. You will also need a USB2 flash disk for the BC drivers for it to work. Please ensure that the DVD is burnt at the recommend rate for the physical media and verify, otherwise you will end up with an unusable DVD. -
I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!
i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives
-
After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
30 May 2011, 18:22h UTC
Downloaded 4.0 UK-edition on my laptop, the 4.0 US-edition on my desktop, and the 4.0 UK-edition on a 2nd laptop.
On mine, updates to 4.0.1 are not found, some add-ons were taken off, as incompatible, that ran on the 4.0 on my desktop (and weren't on the 2nd laptop). Add-ons, now already even compatible with 4.0.1 (running on the 2nd laptop) will not run as 'incompatible' with 4.0 (though listed on the add-ons site as compatible.
It has stopped telling me that 'something' is pretending to be an update from Firefox (whatever that 'something' be?) since setting the browser to updating manually, but asking me first what to do. All currently installed add-ons have not asked me for some time (though on other computers), and also report as fully up-t0-date.
Ergo: Neither Firefox 4.0 nor any installed add-ons update correctly.
Didn't crash, though it 'likes' doing that after printing (always Badly! with dreadful printing options/previews), leaving two tabs (rather than the one before), both of which only can be shut from their context menus. Crash reports have been sent with same email address, but not been answered. This browser has all the qualities of a Beta-release and needs some serious overhauls (it's also not very new or much safer!).
Example for an add-on that won't install on 4.0, but will under 4.0.1: CookieMonster - which is desperately needed, given your browser still suffers from minimal, insufficient cookie management, incl. lists of domains that wish to set 'another' cookie when no cookies are as yet, allegedly, sitting on the computer.I've since updated manually to 4.0.1, but haven't yet tried the full uninstall version, because I have to export plenty of settings first (and/or manually copy them). Also means I'd have to start from scratch with many customizations in No Script.
That said, I'll try the 'Safe Mode' option tonight, thank you :-)!
If I have to uninstall the whole shebang, I'd be more tempted to go back to 3.6.x until a few more of 4's teething problems (e.g. the messy print dialogues, particularly preview, which regularly doesn't even work) have been tackled.
Thanks-1M! for now - keep you posted. -
Itunes will not run on my pc after update: see error messageProblem Event Name: BEX
Itunes will not run on my pc after update, i get this error message:
Problem Event Name: BEX
Application Name: itunes.exe
Aplication Version 10.7.0.21
Application Time Stamp 504d85d9
Fault mode Name: Quicktime.qts_unloaded
Any Ideas on a fix??Fault mode Name: Quicktime.qts_unloaded
Try updating your QuickTime Player to the most recent version. Does that clear up the launch errors? -
i am running windows 7 64bit professional on an asus essentio series cm5675 i5 processor with 16gigs of ram
any reason or what is causes the update program/service to not run?Hi, here is the report generated by the Farbar Service Scanner:
Farbar Service Scanner Version: 31-05-2013 01
Ran by Owner (administrator) on 02-06-2013 at 13:50:39
Running from "C:\Users\Owner\Desktop"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo IP is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
Firewall Disabled Policy:
==================
System Restore:
============
System Restore Disabled Policy:
========================
Action Center:
============
Action Center Notification Icon =====> Unable to open HKLM\...\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A} key. The key does not exist.
Windows Update:
============
BITS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Windows Defender Disabled Policy:
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1
Other Services:
==============
Checking Start type of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ImagePath of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ServiceDll of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
File Check:
========
C:\Windows\System32\nsisvc.dll => MD5 is legit
C:\Windows\System32\drivers\nsiproxy.sys => MD5 is legit
C:\Windows\System32\dhcpcore.dll => MD5 is legit
C:\Windows\System32\drivers\afd.sys => MD5 is legit
C:\Windows\System32\drivers\tdx.sys => MD5 is legit
C:\Windows\System32\Drivers\tcpip.sys => MD5 is legit
C:\Windows\System32\dnsrslvr.dll => MD5 is legit
C:\Windows\System32\mpssvc.dll => MD5 is legit
C:\Windows\System32\bfe.dll => MD5 is legit
C:\Windows\System32\drivers\mpsdrv.sys => MD5 is legit
C:\Windows\System32\SDRSVC.dll => MD5 is legit
C:\Windows\System32\vssvc.exe => MD5 is legit
C:\Windows\System32\wscsvc.dll => MD5 is legit
C:\Windows\System32\wbem\WMIsvc.dll => MD5 is legit
C:\Windows\System32\wuaueng.dll => MD5 is legit
C:\Windows\System32\qmgr.dll => MD5 is legit
C:\Windows\System32\es.dll => MD5 is legit
C:\Windows\System32\cryptsvc.dll => MD5 is legit
C:\Program Files\Windows Defender\MpSvc.dll => MD5 is legit
C:\Windows\System32\ipnathlp.dll => MD5 is legit
C:\Windows\System32\iphlpsvc.dll => MD5 is legit
C:\Windows\System32\svchost.exe => MD5 is legit
C:\Windows\System32\rpcss.dll => MD5 is legit
**** End of log **** -
Any update from 3.6 will not run
Any installed update from
3.6.3 will not run.
Is not shown on program list but exe file shown in task managerOK. Try this:
1. Delete the taskbar icon by right clicking it and selecting "unpin this program from taskbar."
2. Click the Start button. Click All Programs and find "Adobe Lightroom 3.6 . . ." This should show up near the top of the program list.
3. First, left click this item to be sure it works to open the program. [If not, I'm out of ideas and you may have to re-install Lightroom.] If it does work, close Lightroom (once it has opened).
4. Click the start button and locate Lightroom 3.6 again. This time, Right-click this item - holding down the right mouse button - and drag it to an open area of the taskbar. You should see a prompt to "Pin this Program to Taskbar." If so, release the mouse button, and the new icon will appear on the taskbar. Try clicking this icon normally and LR should open for you,
DJB -
Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714) -
the firefox set 7.01 up file can be downloaded but will not run do I have to update to 4 the 5 up to 7?
download run setup
unable too run setup everytimeThe longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is. -
I am running OSX 10.4.11 on my iMac; Firefox automatically updated to version 12, and now it will not run on my computer.
Is there a way to deinstall the new version while keeping my saved bookmarks, etc?
If not, how do I deinstall 12 and reinstall the older version of Firefox that worked with my operating system?
Thanks.[[Firefox no longer works with Mac OS X 10.4 or PowerPC processors]].
You can install Firefox 3.6 from [http://www.mozilla.org/en-US/firefox/all-older.html http://www.mozilla.org/en-US/firefox/all-older.html]. Please keep in mind that not only is Firefox not receiving any updates (thus rendering it insecure), neither is Mac 10.4 or any of the plugins used on it. Running such an old Operating System is dangerous to your information's security on the internet. something for you to keep in mind.
Maybe you are looking for
-
How to put check box in a table format at the out put ? Urgent issue...
Hi, I am working an assignment to assign multiple roles for multiplr user. In selection screen we have to enter mutiple EMPNO from ..to 1) in second screen we will get the empno, First name, last name, Position, From date, To date, Sap user ID
-
Why I can't see Premiere ProCC in Adobe Creative Cloud?
Why I can't see Premiere ProCC in Adobe Creative Cloud?
-
How to calculate a percentage of a Running Total?
Post Author: pvang CA Forum: Formula Hi folks, Quite new here to the forum and to Crystal Report. As you can tell, I've already stumbled upon a roadblock. Here is what I'm trying to do:I am grabbing employee names and the number of cases that they
-
Can i share folders with a PC?
Is there a way to share folders between MAC and a PC?
-
R12 generate excel report?
Dear all, I was using 11.5.10 and which supports to generate report in excel file format by using owa.get_page utilities on database 9.2.0.3. However, I put the same package in new R12 (database 11g) and run the report with error message like owa uti