Boot Camp Update Server

I asked this question beforem but didn't receive an answer. Anyway I am still tring and get the same message.
I have been trying to install windows 7 on my macbook pro. I have a clean install of mavericks on it. When I try to use bootcamp it gives me the message:
Can't install the software because it is not currently available from the Software Update server."
Its been a while so I am not sure if it is my machine or apple's server is real unavailable.
Anyone run into thiis problem?
Eddie

Instead of downloading the Windows support software from Boot Camp Assistant, download it from the Apple website. Mid 2009 and older MacBooks Pro only support this Windows support software version > http://support.apple.com/kb/DL1630 This version allows you to install a 32-bit or 64-bit Windows 7 version.
Follow Apple's steps to install Windows on your computer > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Similar Messages

Boot Camp Update to 2.1 don't work

Hello,
I am new here. My MacBookPro runs now 2 years without problems.
I upgrade my HDD to a 500 GB model and it works fine.
The Windows Vista Business(now the English Version) don't accept the Boot Camp Update to Version 2.1.
Before I have used the German Vista Business and it works fine.
My Idea is, get the Boot Camp 2.1 from a new Installer DVD and install it. It should work. Or I wait until the Apple Update Service fix the problem.
I don't know? Do I really need this update? I update the Nvidia Driver allready separatly to fix a problem with my second screen and it run well.
http://www3.pic-upload.de/01.06.09/n5d3pf.jpg
http://www3.pic-upload.de/01.06.09/ddi9f2.jpg
Thanks.
Mark

Hmmm, please read carefully. It isn`t a problem with Boot Camp, I think.
Please tell me, if I am fail.
Boot Camp run perfectly on Vista 2.0 from my Leopard Installer DVD and 2.1 from the new Leopard DVD. I don't have one of the new DVD now, but a friend try it out allready. It run's. My question is, why I can't install Boot Camp 2.1 with Apple Software Update? In the German Version of Vista Business I don't have these problems. Why now with the English Version?
Helpless...
Mark

Boot Camp Update failure

Hello good people, hopefully someone can help.
Issue: Boot Camp Update 2.1 failing to install.
I recently did an erase and install on my MacBook. I have run through the steps provided by the installation guide (http://www.apple.com/support/bootcamp/). I then went to the Apple Software Update program within Windows Vista Ultimate (32bit), selected Boot Camp Update and selected Install 1 item. I then selected Boot Camp Update Download Only from the Tools drop down menu. I then opened the Open Downloaded Updates Folder...selected the downloaded file and selected Apply. that procedure produced a system restart. Restared and tried again, same result.
I have tried the above steps with security software enabled AND disabled.
Does anyone have a step by step resource to sucessfully install Boot Camp Update 2.1?
Thanks for reading, if you have any questions or suggestions I would greatly appreciate it.
Martin

http://support.apple.com/downloads/BootCamp_Update_2_1_for_Windows_Vista32
http://support.apple.com/kb/HT1845
Do you have 10.5.5 DVD or later? you may not need 2.1, and it was a two step update, first to update Apple Software Update itself to 2.x, then to update other components.
Some programs like iTunes, Safari 4 beta and others include an Apple Software Update (and cannot be not installed, it gets installed regardless of choosing not to).
Some problems can be related to default language settings.

Boot Camp Update from 1.4 (beta) on WinXP Pro

I need some help. I have a 17" MBP core 2 duo running WinXP through Boot Camp 1.4 (beta). On the Mac side I use OSX(10.4xxx) - Tiger NOT Leopard.
I would really appreciate it if someone could post a 1,2,3... list of how to update my Boot Camp version. Do I even need to do this? Will it make anything better on my computer?
Also - the Boot Camp update is not showing up in the Apple Software Update (in Windows). I downloaded the Boot Camp update for XP and nothing happens when I try to open it. Any thoughts?
Thanks,
Chris

Chris:
Fortuny is right. You will need to have boot camp 2.0 installed before you get 2.1 installed. You have version 1.4. you must first update it to version 2.0. For that you will need the Leopard Installation Disk. I know you are running Tiger however if you happen to have a Leopard Installation disk then the solution posted [HERE|http://discussions.apple.com/thread.jspa?threadID=1499769&tstart=0] will work for you.
Axel F.

Early 2014 Macbook Air Boot Camp update?

Hello support community,
I have recently switch to Mac, and find the machine very easy to work with. But still i miss some windows application, and i thought that my Mac would have boot camp support. I have never been so wrong, as the boot camp cannot download the lastest updates
So, my question is, do anyone know when they will release official Boot camp update for this Macbook air early 2014?
Also, should i play it hard using the rEFIt? Driver conflict may be an issue there.
Please help, and sorry if I did anything wrong, as this is my first post.

I'm afraid they are not the case. I prepared a FAT usb, the copying process was done, and it stuck right at the "Downloading updates" kind of things for hours. After some research, I deducted that this is because, according to recent boot camp update, the MacBook Air 2014 is yet to appear on the list of supported devices.
Guess I'll have to wait a bit more.

External Display won't work with boot camp updates?

I'm using Boot Camp 4.0 with the latest updates - on Windows 7 x64.
I've been using my Thunderbolt to DVI adapter for months now on the same monitor (la2206x) and suddenly it doesn't work - forcing the resolution to 640x480, which, really is a lie because the monitor isn't picking up a signal.
Tried this with 2 other monitors as well with no luck. I depend on the second monitor for testing and design/development, so this has become high priority issue.
And no downloading HP drivers does not work - thet PC doesn't even recognize them and reverts back to "Generic Non-PNP Monitor"
Anyone else experiencing this issue?
Kind Regards,
J

I'd just like to add that this no longer works with OS X Lion 10.3.8 either... Get your **** together Apple. It's called MacBook "Pro" for a reason.

Unable to install Boot Camp Update 3.1 on Windows 7 32-bit on MacBook Pro

I have Windows 7 Professional 32-bit on my MacBook Pro and have Boot Camp 3.0 now. I've tried to install Boot Camp 3.1 both using the Apple Software Update on Windows and the installation from http://support.apple.com/kb/dl996 but it won't work. Are there any ways to solve this problem?
Message was edited by: Ho Ren Sen

Hi and welcome to Discussions,
do you have any kind of Remote Viewing software installed, like LogMeIn or Go To My PC ?
These are known to cause trouble with the the BC Driver packages.
Check if there are additional Graphics Adapter shown (apart from the "real" one).
If so, uninstall the remote software, do the 3.1 update and then reinstall.
Regards
Stefan

If I want to run OSX Server and also want to run Windows 8 on Boot Camp, will server still run when I boot into windows?

I want to set up OSX Server on my iMAC running Mavericks and also install Windows 8 on Boot Camp. If I do this and boot into Windows, will that prevent server from running while I'm in Windows?

No. Bootcamp, as you've described, requires rebooting into your chosen operating system. If you want to run both OS X and Windows at the same time from your hardware, look at virtualization tools like Parrallels or VMWare.
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

Boot Camp Update 2.1+ Killed Broadcom 802.11n Usage

Ever since Apple released the 2.1 updates I had nothing but problems with my wi-fi broadcom 802.11n. As soon as the update is complete my wi-fi no longer sees networks. I solve the problem initially by doing a system restore to pre-update and then not installing the updates. Then I set a system restore point and attempted an update and when it was done not only was the wi-fi no longer working but my system restore point disappeared.
The modem is working because when I log into the Mac OS it works straightaway. When I go into Vista I can use ethernet to access the net but not wi-fi. I go into the connections area and the broadcom modem says disabled. I click 'enable' and then approve and it says 'enabling' and then disappears but still says disabled.
I then upgraded to boot camp 2.2 and the problem is still there. I checked the driver settings and they are: 4.170.25.12 driver version. I've rolled back to the Microsoft version and same result.
I've tried so many things but cannot figure out how to get the Broadcom wi-fi working again. Anyone have anything similar happen or any suggestions?

I solved this problem after 9 hours. The solution was alluded to in another post I found through google. When I uninstalled the drivers and then went to re-install I chose to select the drivers and then view available drivers. My system showed 3 drivers, 1 Microsoft and 2 Broadcom. I chose the certified Broadcom from 2007 and that one works.
Hope its helpful to others.

Boot Camp Update 3.1 fails to install

I'm using a MacBook Pro 2010 and I have installed Windows 7 Ultimate x64 using Boot Camp. I installed with Boot Camp 3.0, and in Windows the Apple Software Update tool wants me to update to 3.1. Three times now I have downloaded, installed, and restarted my computer, and after every time that same tool tells me that I should update to 3.1.
Notes: I am running a with a single user account, which is a password-protected Administrator account. I give the software permission to run, of course.
Possibly related(?): At every startup into Windows, after the OS select and before the Windows load screen, I get a black screen with a single flashing underscore. I am wondering if it is trying, and failing, to apply the remainder of the 3.1 patch? Any other ideas? The black screen lasts for approximately 15 to 20 seconds before Windows continues to load.

I have the same problem. Could you help me?
Thanks.

Boot Camp Update and W7 Mode

This is a new one on me. I was working in W7 and discovered after a time there was the familiar Apple s/w Update requester behind a few windows, It showed updates for Boot Camp - over 320 M and for Itunes and Quicktime. Problem is that it was not feasible to download at the time and I reverted to Mac
When I went back to W7 the update requester was nowhere to be found and when I did a s/w update on the Mac side it did not ID a Boot Camp upgrade
Questions. How do I get a s/w update to start in Boot Camp mode? How do I find it from the Mac side?
Thanks so much for any insights on this one
Geoff

Hi walking Shoe,
this is the update for Boot Camp 3.1 32-bit: [http://support.apple.com/kb/DL996]
Its around 380MB.
You have to move it to the win side & install it in windows.
You can download the 3.2 the same way.

Boot camp update help!

I need to update my boot camp assistant so I can download windows 7 that I just bought. The boot camp that is currently on my computer is only compatible for windows xp or vista. Can anyone help me figure out how to get the updated version of bootcamp?

And, what version of OS X do you have installed? Boot Camp Assistant is only updated with new updates for OS X. Plus, you must have hardware that can be used with Windows 7.
Boot Camp- System requirements for Microsoft Windows
Boot Camp- Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
About Boot Camp and Windows 7

Boot camp update affecting bluetooth?

Hi,
Last night I was using Windows Vista on my boot camp partition and I got the Apple Software update letting me know there was a new version of boot camp available. When I finished my work I set it to update and everything seemed to go smoothly.
Today I've booted up windows and my Logitech V470 bluetooth mouse doesn't work. Windows sees it. I've removed it and reconnected it fine, but the pointer doesn't move when the mouse does.
I've also tried to connect my iPhone over bluetooth and that is also seen by Windows. I seem to be able to pair the devices OK, but when I then try to get my iPhone to connect to Windows it fails.
Any ideas what has happened here? Any help would be greatly appreciated.
Thanks.

After playing around with the settings in Control Panel and rebooting a few times, my mouse has sprung back into life. My iPhone still won't connect.
Dunno what's going on, but at least I can work again now.

Boot Camp update 3.1

I installed Win7 on Boot Camp 3.0.1, soon after getting the Macbook Pro. I then installed Parallels 5, and set it to use the Win7 installation. Soon afterward I got invalid activation number notices, and had to get a phone re-act from Windows, which worked.
I read somewhere that the problem was that Windows saw a hardware change with the Boot Camp - Parallels connection, hence the activation issue. So I used ONLY Win7 thru Parallels, and not ever Boot Camp directly.
Now I ses an update to Boot Camp 3.1 available, and Apple now supports Win 7. So I tried to install the BC 3.1 update. This is what happened (2 or 3 times now):
1) I click on the 3.1 Update exe.
2) Parallels-Win7 immediately opens, and something like installation procedures happen.
3) am asked to restart. I do.
The About This Mac check on software tells me that Boot Camp Assistant is still 3.0.1 version. No update.
Software requirements on the Apple site for BC 3.1 lists Win Xp, which I don't have - I have only Win7 (64 bit).
My questions:
Is there no upgrade possible without Win Xp?
Is there any way to do the upgrade?
Does this upgrade allow Windows to see ONLY one machine when switching between Boot Camp and Parallels 5 - thus no activation issues with MS?
I'd appreciate any help.
tomas

Read this article: http://support.apple.com/kb/TS3172
You will need to install the Boot Camp Utility for Windows 7 upgrade and follow the instructions in this article. I don't have Windows 7 so can't be absolutely sure how the procedure works. This article doesn't address the effect of having Parallels installed. I don't have Parallels either so can't help with this aspect.
I don't know whether there is an additional special sequence to follow to ensure the update of Boot Camp when Windows 7 is already installed.
Neville

Boot Camp Update 2.1 will not run

I'm trying to install Windows XP on my Intel Macbook. It's a legal copy purchased from Microsoft so no trouble there.
The Bootcamp Assistant worked fine and the Windows install worked fine. I'm now at the point of trying to install the Boot Camp drivers but I don't have my Leopard disc available. (I bought a an OS X Family Pack and my son currently has the discs 20 miles away.)
Accordingly, I downloaded the Boot Camp 2.1 update from Apple but it simply will not run under Windows in the Boot Camp partition. It briefly looks (1-2 seconds) as though it's starting, but then never does.
I tested the .exe file on a pure Windows machine and it runs fine so there's no file corruption problems.
I've searched online but can't seem to find any solution to this particular problem.

djrichards wrote:
Thanks for the response, Stefan.
But that's not what the Apple download page says. Specifically it says the following.
"Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS."
Hi,
I admit I haven't ever taken a closer look at that and as said to my knowledge, the 2.1 update only works with the 2.0 drivers already installed.
Just did a quick googling and couldn't find any success story of using the 2.1 Update as a standalone driver install without having the 2.0 driver installed before.
Do you have the needed Admin rights when running the update.exe ?
Stefan

Boot Camp Update Server

Similar Messages

Maybe you are looking for