Boot camp win xp goes black when load video drivers + other probs

Hello, I partitioned, loaded Win XP Pro, and XP runs fine, but when I load the Sno Leopard disc to update drivers, the screen goes black, and will not return. I can restart in OSX, but in windows, the screen is black. I cannot work on anything if I cannot see it.also, the bluetooth mouse does not work. I need to load the other imac to xp drivers, not load the video driver, and then get an updated radeon driver. (I think?) Any have the same problem and have solved it?. thanks
Mike

oboearia wrote:
Well I got Input Remapper running because Speed Fan couldn't find my fans. Now after about 120 minutes on Perfect World I'm running between 135 and 140 F, but not shutting down.
Thanks so much for the help Stefan!
You're welcome anytime.
I'll be sure to post again if at a later point I have more problems.
Feel free to do so, I (and a whole lot of others) will be here
Though as a side note; Should i be looking into getting hardware fixed? I'm covered under Apple Care for about 3 more weeks. But last time i took it into my repair shop they told me they couldn't find any problems. : /
That is indeed the problem, if they can't find anything to fix, they won't fix.
If you can reproduce the error when in the shop (maybe disableing InputRemapper for that purpose) or if you have other problems (preferably while in OSX) it could be good to have them have a look at your Mac.
Make an appointment with the Shop Genius and go there with some free time at hand.
Take care
Stefan

Similar Messages

Satellite L405D-11V - Freezes and screen goes black when watching video

Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
Thanks

Hi buddy,
Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
What operating system you are using on your Satellite L405D?
To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
In my opinion you should try updating the display driver. Maybe its causing the issue
If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
Explain your problem very detailed. I think everything can be clarified then. :)

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Screen goes black when coming out of screen saver. HP Pavilion,p7-1414 desktop, windows 8

the monitor shows the windows 8 screen with the apps, then the screen saver will come on. Then when I try to bring it out of the screen saver mode the screen goes black and nothing I do will get it to go back to the windows 8 screen. Then the mouse pointer will disappear. So I end up having to shut down the computer using the power button. If I have the screen set up for the old style windows 7 and it goes into the screen saver and I bring it back there's no problem.
fleamarketlady

Hello fleamarketlady,
Your computer goes black when it comes out of sleep mode some times.
Make sure that you are only using one cable to connect the monitor to the computer.
Open up command prompt and run the following command SFC /scannow.
This will scan the system files and correct any errors that it can.
Here is a link to command prompt.
When you go to open command prompt, right click and run as administrator.
If you are still having the problem you can perform a system refresh.
This will uninstall windows 8 and reinstall it without affecting your personal information.
Here is a link that will walk you through the steps for a refresh.
Let me know how everything goes.
Have a good day.

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

Macbook Pro 15" 2010 display goes black when opening PPT

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

IPhoto going black when using the contract tool

my picture goes black when im trying to edit using the contrast tool!
what the heck.. any advise?

Do the other tools work correctly in the edit mode? Try the following: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If that doesn't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers to get it working as it should. I have tryed Winows 7 Con, in setup.

Did you download the drivers to a FAT32 formatted USB drive per the instructions?

My iPod touch goes black when I try to face time. Can anyone help with a fix.x

My iPod touch goes black when I try to use FaceTime. Can anyone help.x

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>FaceTime and sign out and then sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Boot camp in Windows 7 doesn't install graphics drivers

I installed Windows 7 through Boot Camp today on my MacBook Pro, which I have hooked up to an Apple Cinema display due to screen issues. I put in my Mac install DVD and installed Boot Camp. However, it appears that my graphics drivers have not installed, because the display is squashed, and when I turn the resolution up, my Apple Cinema display turns off. I have done this before, and had this problem, but I don't know how I fixed it (i'm going to record what my solution was this time, just in case). It's an early 2007 MacBook Pro, with an ATI Mobility Radeon X1600. I think other people have had similar problems, but the answers to those don't help, and I haven't found a question for my specific graphics card. Help is much needed! Thank you.

vegeta559m wrote:
Apple employees do read these posts right? Why are you guys so afraid to let graphics switching be available on Windows? Why do you guys cripple Windows and say that is isnt Apples fault for not delivering optimized drivers to get the same experience you do on Mac OS? For all the money that we put out we should have the right to use all the available hardware on any os.
Buy a Windows machine!

When loading video or tv shows it is taking as long as 14 hours plus - if I leave the loading screen it doesn't continue to load? So you have to wait without leaving the screen for 14 hours?

When loading video or tv shows it is taking as long as 14 hours plus - if I leave the loading screen it doesn't continue to load? So you have to wait without leaving the screen for 14 hours? Unfortunately - I've been reading that this lengthy download problem is quite common - although I thought I saw where someone had loaded videos the day before and then had them to watch later. So, my first rental - I downloaded it overnight - then we go to watch it tonight and it proceeds to start loading again...saying it will be ready in 14 hours and 21 minutes!!! Am I doing something wrong here? If anyone has advice - I would greatly appreciate it. This is the first apple product that I am disappointed with

When loading video or tv shows it is taking as long as 14 hours plus - if I leave the loading screen it doesn't continue to load? So you have to wait without leaving the screen for 14 hours? Unfortunately - I've been reading that this lengthy download problem is quite common - although I thought I saw where someone had loaded videos the day before and then had them to watch later. So, my first rental - I downloaded it overnight - then we go to watch it tonight and it proceeds to start loading again...saying it will be ready in 14 hours and 21 minutes!!! Am I doing something wrong here? If anyone has advice - I would greatly appreciate it. This is the first apple product that I am disappointed with

IPad Mini 2 goes ballistic when being charged -- in other words, it hangs abruptly ; does not type properly. Moreover, in some instances open apps peculiarly force quit without the screen being touched whatsoever.

iPad Mini 2 goes ballistic when being charged -- in other words, it hangs abruptly ; does not type properly. Moreover, in some instances open apps peculiarly force quit without the screen being touched whatsoever.

Hi, RomeroSalsa.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an issue with the responsiveness of your iPad mini while charging. I would need a little more information on how you are charging the device to provide a better answer. While the steps below are not exactly labeled for this issue, they may help resolve the issue.
If the battery doesn’t charge
If the battery doesn’t charge, unplug your device and try these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris.
If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
Try a different USB cable, USB power adapter, or USB port.
If everything seems to be working, reconnect your device and wait for 30 minutes.
If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
If you can’t charge your iPhone, iPad, or iPod touch
-Jason H.

Boot camp win xp goes black when load video drivers + other probs

Similar Messages

Maybe you are looking for