Boot camp window inactive except for docking. cannot continue.what's up?

boot camp window is inactive except for docking. cannot continue..anyone know what's up?

What is docking?

Similar Messages

  • Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

    I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

    here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

  • Is Paragon's "HFS+  for Windows" safe to use in Boot Camp Windows &/or Parallel 8 Windows?

    Is Paragon's "HFS+ for WIndows" safe to use for read+write access to HFS+ drives when running Windows [8] via Boot Camp?
    Drivers that came with Apple Boot Camp (or maybe Parallels [8]) enable "read-only" access to HFS+ formatted drives from Boot Camped Windows, but I want to be able to write to the drives, too.  I'm worrying about whether something in those Apple (or Parallels) drivers for Windows that makes that possible might also conflict with other software like "HFS+ for Windows," maybe even make a risk of corrupting the HFS+ disk (either external or even the OS X boot partition) so badly that everything on it becomes lost.
    So I'm looking for people's experiences with using "HFS+ for Windows" with Parallels Desktop [8] for Mac.  Is it safe?
    Thanks.

    Thanks, Templeton.  Yes, within OS X using Parallels 8 the integration with the Windows Parallels virtual machine is great.  But once I leave the OS X / Parallels environment the folder sharing access disappears.  So when I Boot Camp to Windows I have no visibility into the OS X partition nor any external HFS+ drives.  (Except for a few specific activities that can only be done in OS X or are best in OS X, I spend almost all my time in Windows, so I usually wouldn't run OS X or Parallels to Windows.)
    Thanks GeekBoy.  Paragon HFS sounds risky with Parallels.  I'll be eager for more feedback about risks of using that combo from whomever can offer it.

  • Boot Camp Update 2.1 for Windows XP after SP3 installed?

    I accidentally installed SP3 on my Boot Camp Windows XP installation, and now BC update 2.1 will not install (fails). I currently have BC 2.0 running.
    Is there any way to get BC 2.1 to install AFTER SP3 has already been installed? Can I roll back SP3?

    Well, I had similar issues, at least, in that I had not installed the update before SP3, actually, I wasn't even aware of the update until today when I started hunting for a driver update for my graphx and soundboard, since some games that used to be stable were crashing on me all the time.
    As I actually have a licensed OEM version of XP on my bootcamped partition, re-installing it may cause me to have to call to MS to even be able to activate and I really didn't feel like doing that...
    What I found out is that you can unpack the .exe file using 7Zip (and probably other similar tools) which yields two new .exe files, one of which with almost the same name, unpack that one too and you should end up with a directory named "BootCamp20ToBootCamp205" containing a bunch of files that start with "binary.". Figure out which ones are important for you (for instance, I needed Binary.Nvidiamobile_XPBin for my MBP) and add the .exe extension to the file-names, run them and follow the instructions.
    This will give you at least a partial update for those components that are causing problems. Now all we have to do is wait until Apple makes an SP3 compatible installer-bundle so we don't have to go through this crap by ourselves...

  • Boot Camp Windows 7 No Longer Connects to Internet

    Hello, I have a mid 2011 iMac with Boot Camp Windows 7 installation.  It has run flawlessly for more than a year.  Recently however, I have been untable to connect to internet when running Windows.  The connection works fine as a Mac.  While in Windows, I can momentarily (about 10 seconds) connect by disconnecting and reconnecting the LAN cable.  Then the "no internet."  I have all the latest Boot Camp support software installed.  All MAC and Windows software updates are installed.  My network devices are configured correctly.  I have rolled back to previous Windows updates with no resolution.  Does anyone have any suggestions?

    your router, your Windows firewall, you are using something other than Windows Defender (8) or Essentials (7), something else on the cable.
    you had a storm and the modem is on life support and your ISP can login and see what errors the modem is showing, you don't have network surge protection (APC tend to interfere, Cyberpower tend to work).
    What else is on the LAN?
    I found Windows to be funny about network but 8 and 8.1 have never had trouble. With 7 I sometimes had to reboot.
    Besides Apple and Windows, some drivers are or often still needed - manually.

  • How do you switch iMac 27" display when in Boot Camp (Windows 7)?

    Hello,
    My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2. 
    When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
    Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
    Thanks!

    I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
    I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
    Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
    I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple.

  • HT201541 Mac mini Late 2014 Boot Camp Windows 7 sound issue

    Hi,
    I'm wondering if anyone can help me with my Mac mini (Late 2014) and Boot Camp (Windows 7). The problem I'm having is that there's no audio when I boot into Windows 7, though everything works fine under OS X. After installing Boot Camp and Windows, the audio worked perfectly up until yesterday, and now there's nothing. I've tried updating as well as uninstalling and reinstalling drivers, but this hasn't helped at all.
    When I open Volume Mixer and Playback Devices, the sliders show that audio is playing, but I hear nothing - either from the built-in speaker or when I headphones.
    The Device Status indicates that "This device is working properly" and that the drivers are up to date. Tthe following drivers are installed:
    dmk.sys
    HdAudio.sys
    ksthunk.sys
    portcls.sys
    SysFxUI.dll
    WMALFXGFXDSP.dll
    Has anyone else encountered this issue, or does anyone have any tips on how I might fix this?

    Is the volume Muted? The Mac has an Audio database of devices and volumes in NVRAM, so an SMC Reset or PRAM reset might help. Please see this link for appropriate keys Startup key combinations for Intel-based Macs - Apple Support.

  • Boot Camp / Windows Partion... Can it be installed on a separate hard drive

    I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
    Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
    Thanks for you feedback.
    Mike

    Hi Mike,
    since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
    With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
    On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
    Reasonable size depends on what you want to do with it.
    Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
    Add to that the HD space you need for the programs and data you use/produce.
    And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
    Windows XP at least 30GB, Vista at least 50GB.
    Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
    Regards
    Stefan

  • Boot Camp Windows 7 do not recognise wifi, ethernet, USB ports and has a scary red light in audio jack output!

    Hi!
    I have just tried to install Windows 7 x86 version on my MacBook Pro running Mountain Lion and a couple of strange things start appearing:
        1. On the Boot Camp Assistant first screen, I tried to download the drivers and after about 15min the system responding that the server did not responded.
        2. I went further and installed the Win7 without making the ISO as requested by the assistant and with no driver burned on a CD
        3. After installed the Win7 I noticed that it did not recognise the WIFI in my home nor any other in the area;
        4. There is a freaking RED LIGHT coming from my Audio jack output that I have never seen in my life... and that scares me!
        5. The USB ports does not works on Win7 side !
        6. The ethernet does not work, Win7 just don´t recognise it...
        7. There is no Boot Camp on Win7 side to be deployed...
    Basically I will use Windows to run Quicken for Windows, but I can´t acces my backups on Dropbox because I do not have intercet access, and obviously I am not going to be able to back up new files.
    Is there someone able to help me?
    I have:Boot Camp 5.0.0 / Win7 Ultimate x86 / MacBook 2,5Ghz Intel Core i5 MID-2012 / Memories 4GB amd 500GB/ OS X 10.8.1 / Boot Camp partition with 50Gb for Windows.
    I appreciate all help!

    Did you make sure to install the Bootcamp utilities after installing Windows? They can be found in the boot disk/usb flash that Bootcamp creates (check for a folder called "Windows Support").These should enable sound/video/trackpad/etc.to work with full functionaliity under Windows (you may need to reboot after doing so). After installing them, you may also want to run Windows Update to make sure you get the latest drivers.
    As far as the red light, many models of Macbook Pros are equipped with a digital Audio out. You can either use the standard analog 3.5mm Stereo jack (standard headphone connector), a 3.5mm miniSPDIF digital coax or miniTOSLINK digital optical cable (hence the red light). Windows may not know how to handle to audio out port until the proper drivers are installed and it may be enabling the digital signal by default. Installing the drivers mentioned above should set this back to normal operation.
    hope this helps.
    Toodles!

  • Boot camp, windows xp and macbook pro-install problem

    MacBook Pro 1,1
    Mac OS X 10.6.8
    Boot Camp Windows XP
    I installed a SSD and want to put Windows XP back on the computer.
    I had Windows XP running under Boot Camp on my old HDD.
    During the Windows XP install when it tells you to
    press ENTER to install Windows XP
    press R to repair a Windows install
    press F3 to exit
    I can't get the install to accept any input from the keyboard.
    I tried searching the discussions but I'm not finding the answer.
    I'm sure it is just something simple I'm not doing. I had Windows XP
    running on this MacBook Pro before.
    Thanks

    I wonder if your XP works with SSD or some SSDs have had trouble with Windows on Macs...
    I'd search out PC forums + brand SSD for starters users with XP.
    Everyone I run across though have moved on to Windows 7 64-bit.

  • Boot camp 5.0.1 for MacBook Air?

    Hey.
    So I just was asked to install Windows on his new MacBook Pro with Retina Display for him since he said himself he felt kinda dumb to do it. But when I opened it, it showed me I could create a windows install disk o.O
    So I went to my MacBook Air and noticed that our versions differ. Appearently I have 5.0.0 - and he has 5.0.1...
    Is there a way to optain the update ?
    Regards, Ingwie.

    Update. I did not install all the drivers from the Boot Camp Windows Support which I copied to a USB flash drive.
    I don't use the PC side much, So I only ran the exe files for the Broadcom stuff which gave me internet connectivity, and the Bluetooth exe files which gave me my Magic mouse. Problem is solved. My connectivity issues are with anotjher device and I will contact the.
    Thanks for Viewing.
    CD3

  • Boot Camped Windows 8.1 looks low quality?

    Hello,
    I just recently Boot Camped my Late 2013 Macbook Pro 15 inch so I could play Windows-based games. Everything runs fine, but the only thing that bugs me is the quality of the games, or basically any window. The resolution is fine, everything is proportioned correctly. The taskbar and the blue "frame" that surround the windows are in a crisp, HD quality. But the content inside the windows is soft, and moderately pixelated. For example, when I go the the Google homepage, on Mac, the Google logo is very crisp and looks HD. When I go to the Google homepage on my Boot Camped Windows, the logo is pixelated. Same thing goes for games. Is there any way that I can fix this? To make the games and windows look "better" in a higher quality? Thank you in advance.

    The deep search finally finished:
    And here's the text version:
    MS Data                338695552  651468152  312772601
       MS Data                340391264  653163864  312772601
       MS Data                490233848  803006448  312772601
       MS Data                490233855  803006455  312772601
       Mac HFS                490234708  491504243    1269536
    And after continue:
    And text:
    Disk /dev/rdisk0 - 251 GB / 233 GiB - 490234752 sectors (RO)
         Partition               Start        End    Size in sectors
    >D EFI System                    40     409639     409600 [EFI]
    D EFI System                    46     409645     409600 [EFI]
    D MS Data                 12844161  247217280  234373120
    D MS Data                 25922952  338695552  312772601
    D MS Data                 27618664  340391264  312772601
    D Mac HFS                 97104348  235516637  138412290
    D Mac HFS                 97154892  235567181  138412290
    D Mac HFS                174921356  176190891    1269536
    D Mac HFS                174921727  176191262    1269536
    D Mac HFS                174921894  176191429    1269536
    D Mac HFS                174922198  176191733    1269536
    D Mac HFS                174922470  176192005    1269536
    Structure: Ok.  Use Up/Down Arrow keys to select partition.
    Use Left/Right Arrow keys to CHANGE partition characteristics:

  • Please help with my Boot Camp/Windows problems

    I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
    I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
    I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
    Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
    I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
    Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
    I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
    This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
    So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
    All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
    I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
    I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
    Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
    It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
    I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
    I don’t know what else to try.
    I have a 21.5' iMac:
    Model Name: iMac
    Model Identifier: iMac10,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 3.06 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: IM101.00CC.B00
    SMC Version (system): 1.52f9

    Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
    http://www.apple.com/support/bootcamp
    But I have really only one question:
    Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
    You do NOT need NTFS driver. That is totally wrong.
    Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

  • Completely unable to boot camp windows 7 on Mac Pro

    I am at the end of my rope. I have a Mac Pro 1,1 - 2.66 quad core, 7 gigs of ram. I have been trying over and over and over to Boot Camp Windows 7 onto a secondary hard drive. But every single time time, it hangs indefinitely or straight up freezes during "completing installation". I have scoured the interent for answers. I have tried typing shift+f10 when it hangs and typing in explorer.exe. This doesn't work. I have tried having all USB devices unplugged. I have moved the drive from bay 2 to bay 1 and having the other 2 drives empty. I have tried multiple discs. And from what I have found, the Mac Pro is completely unable to boot from a USB drive with the Windows 7 installer on it. WHAT DO I DO? Please help!

    your mac pro like mine has older EFI firmware that does not support booting Windows 7 64-bit.
    You will have to remove all other drives.
    Before you do, reformat the drive you want ot use as Windows Master Boot Record and FAT32, then format the drive with Windows during install.
    Get rid of whatever is on the drive now.
    You will be limited to 1.9GB RAM
    Windows 7 Home Premium supports just one cpu, you have two.
    64-bit Windows requires UEFI which you don't have and would need to edit and modify the DVD (reburn after using Imgburn).
    Easy method: do basic install on a PC and then put the drive in the Mac Pro.

  • Boot camp Windows xp SP2 wireless is extremly slow

    boot camp Windows xp SP2 wireless is extremly slow or doesn't work at all. It shows connected on weird 270Mpbs good connection. Other PC and laptops work fine. They are on Linsys wireless N GB router.
    I heard some people have problem with SP3, but I am on SP2. If I boot into MAC os, it works perfectly.
    It's MacBook 13, just bought it last week. All drivers are updated.
    Any suggestion?
    Thanks

    I tried what Snackyotter did with no success. I don't really use the Caps Lock Key, or the Option Key at boot, when I want to switch to Boot-Camp and Mac OS X I just change the Boot Disk in System Preferences & vise-versa. Thanks for trying to help though. This weekend I am returning my Apple Slim Wireless Keyboard at the Apple Store. I still have the original packaging and receipt, I bought it offline and received it a few days ago. If the return doesn't go as planned and I'm stuck with this keyboard I will keep this question labeled 'unanswered'. If the return does go well I will label it solved, there is no need really to keep this topic waving around when I no longer have the Apple Wireless Keyboard. I have never EVER even thought of returning an Apple product before, wish me luck. To Apple though I must say that I am disappointed that you have had many months to fix this simple issue since this keyboard came out, but have decided not to. I will try to keep you updated. Again Thank You for your kind support.
    tmt345

Maybe you are looking for