Boot Camp Windows 7 No Longer Connects to Internet

Hello, I have a mid 2011 iMac with Boot Camp Windows 7 installation.  It has run flawlessly for more than a year.  Recently however, I have been untable to connect to internet when running Windows.  The connection works fine as a Mac.  While in Windows, I can momentarily (about 10 seconds) connect by disconnecting and reconnecting the LAN cable.  Then the "no internet."  I have all the latest Boot Camp support software installed.  All MAC and Windows software updates are installed.  My network devices are configured correctly.  I have rolled back to previous Windows updates with no resolution.  Does anyone have any suggestions?

your router, your Windows firewall, you are using something other than Windows Defender (8) or Essentials (7), something else on the cable.
you had a storm and the modem is on life support and your ISP can login and see what errors the modem is showing, you don't have network surge protection (APC tend to interfere, Cyberpower tend to work).
What else is on the LAN?
I found Windows to be funny about network but 8 and 8.1 have never had trouble. With 7 I sometimes had to reboot.
Besides Apple and Windows, some drivers are or often still needed - manually.

Similar Messages

  • HT4407 boot camp says I'm not connected to internet, but i am.

    Trying to install Bootcamp on my late 2009 quad iMac withe Lion 10.7.3 but it keeps saying im not connected to internet, but i am.
    Any help please.

    Let's see.... you don't install boot camp to begin with, you may be referring to downloading the Apple drivers.
    Known issue and need to check and change proxy and network settings -- yu are still in mac OS X
    You are in Windows and cannot connect to the internet ---- you are running Windows
    The only time yu install is after Widnows is installed and then install Apple drivers which are
    BOOTCAMP.msi or BOOTCAMP64.msi usually just run Setup.exe

  • HT1461 how do i set up internet connection in boot camp windows 7

    I just installed Windows 7 through boot camp.  How do I set up internet connection at my school?  MBP 13inch about 6 months old.

    Boris91 wrote:
    Where do you need to install it?
    In Windows.

  • Boot camp Windows xp SP2 wireless is extremly slow

    boot camp Windows xp SP2 wireless is extremly slow or doesn't work at all. It shows connected on weird 270Mpbs good connection. Other PC and laptops work fine. They are on Linsys wireless N GB router.
    I heard some people have problem with SP3, but I am on SP2. If I boot into MAC os, it works perfectly.
    It's MacBook 13, just bought it last week. All drivers are updated.
    Any suggestion?
    Thanks

    I tried what Snackyotter did with no success. I don't really use the Caps Lock Key, or the Option Key at boot, when I want to switch to Boot-Camp and Mac OS X I just change the Boot Disk in System Preferences & vise-versa. Thanks for trying to help though. This weekend I am returning my Apple Slim Wireless Keyboard at the Apple Store. I still have the original packaging and receipt, I bought it offline and received it a few days ago. If the return doesn't go as planned and I'm stuck with this keyboard I will keep this question labeled 'unanswered'. If the return does go well I will label it solved, there is no need really to keep this topic waving around when I no longer have the Apple Wireless Keyboard. I have never EVER even thought of returning an Apple product before, wish me luck. To Apple though I must say that I am disappointed that you have had many months to fix this simple issue since this keyboard came out, but have decided not to. I will try to keep you updated. Again Thank You for your kind support.
    tmt345

  • How do you switch iMac 27" display when in Boot Camp (Windows 7)?

    Hello,
    My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2. 
    When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
    Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
    Thanks!

    I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
    I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
    Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
    I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple.

  • Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox

    Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.

    You could try the following:
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
    Let us know if this fixed your problem!

  • Windows Machines No Longer connecting to Shares

    Has anyone experienced issues with their Windows machines no longer connecting to Shares on the server. I have a Windows 7 machine and a Windows XP machine that were connecting to the Shares without any issue. Then this morning they just stopped connecting. I can ping the server both through its name and through its IP address from those computers but when trying to map a network drive all I am told they cannot find the server to connect. I have set all the appropriate security settings on both machines as suggested in numerous articles. SMB is turned on for the server.
    I have made no changes to the server in the last 24 hours other than to turn off file-sharing and turn it back on to address an issue with Time Machine backups not occuring due to image being locked in use.

    i have a vaguely similar issue, where my server is a member of the domain(workgroup on mac) - suddenly no users from the domain show in users panel,
    and connections are not accepted... 10.8.3/server 2.2.1

  • HT201541 Mac mini Late 2014 Boot Camp Windows 7 sound issue

    Hi,
    I'm wondering if anyone can help me with my Mac mini (Late 2014) and Boot Camp (Windows 7). The problem I'm having is that there's no audio when I boot into Windows 7, though everything works fine under OS X. After installing Boot Camp and Windows, the audio worked perfectly up until yesterday, and now there's nothing. I've tried updating as well as uninstalling and reinstalling drivers, but this hasn't helped at all.
    When I open Volume Mixer and Playback Devices, the sliders show that audio is playing, but I hear nothing - either from the built-in speaker or when I headphones.
    The Device Status indicates that "This device is working properly" and that the drivers are up to date. Tthe following drivers are installed:
    dmk.sys
    HdAudio.sys
    ksthunk.sys
    portcls.sys
    SysFxUI.dll
    WMALFXGFXDSP.dll
    Has anyone else encountered this issue, or does anyone have any tips on how I might fix this?

    Is the volume Muted? The Mac has an Audio database of devices and volumes in NVRAM, so an SMC Reset or PRAM reset might help. Please see this link for appropriate keys Startup key combinations for Intel-based Macs - Apple Support.

  • Boot Camp / Windows Partion... Can it be installed on a separate hard drive

    I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
    Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
    Thanks for you feedback.
    Mike

    Hi Mike,
    since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
    With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
    On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
    Reasonable size depends on what you want to do with it.
    Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
    Add to that the HD space you need for the programs and data you use/produce.
    And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
    Windows XP at least 30GB, Vista at least 50GB.
    Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
    Regards
    Stefan

  • Remove Boot Camp Windows Partition

    I would like to know how to remove the Boot Camp windows partion all together from my computer.

    When I try to use the Boot Camp Assistant it does not give me the option of removing it.

  • Is Paragon's "HFS+  for Windows" safe to use in Boot Camp Windows &/or Parallel 8 Windows?

    Is Paragon's "HFS+ for WIndows" safe to use for read+write access to HFS+ drives when running Windows [8] via Boot Camp?
    Drivers that came with Apple Boot Camp (or maybe Parallels [8]) enable "read-only" access to HFS+ formatted drives from Boot Camped Windows, but I want to be able to write to the drives, too.  I'm worrying about whether something in those Apple (or Parallels) drivers for Windows that makes that possible might also conflict with other software like "HFS+ for Windows," maybe even make a risk of corrupting the HFS+ disk (either external or even the OS X boot partition) so badly that everything on it becomes lost.
    So I'm looking for people's experiences with using "HFS+ for Windows" with Parallels Desktop [8] for Mac.  Is it safe?
    Thanks.

    Thanks, Templeton.  Yes, within OS X using Parallels 8 the integration with the Windows Parallels virtual machine is great.  But once I leave the OS X / Parallels environment the folder sharing access disappears.  So when I Boot Camp to Windows I have no visibility into the OS X partition nor any external HFS+ drives.  (Except for a few specific activities that can only be done in OS X or are best in OS X, I spend almost all my time in Windows, so I usually wouldn't run OS X or Parallels to Windows.)
    Thanks GeekBoy.  Paragon HFS sounds risky with Parallels.  I'll be eager for more feedback about risks of using that combo from whomever can offer it.

  • Boot camp, windows xp and macbook pro-install problem

    MacBook Pro 1,1
    Mac OS X 10.6.8
    Boot Camp Windows XP
    I installed a SSD and want to put Windows XP back on the computer.
    I had Windows XP running under Boot Camp on my old HDD.
    During the Windows XP install when it tells you to
    press ENTER to install Windows XP
    press R to repair a Windows install
    press F3 to exit
    I can't get the install to accept any input from the keyboard.
    I tried searching the discussions but I'm not finding the answer.
    I'm sure it is just something simple I'm not doing. I had Windows XP
    running on this MacBook Pro before.
    Thanks

    I wonder if your XP works with SSD or some SSDs have had trouble with Windows on Macs...
    I'd search out PC forums + brand SSD for starters users with XP.
    Everyone I run across though have moved on to Windows 7 64-bit.

  • Boot camp window inactive except for docking. cannot continue.what's up?

    boot camp window is inactive except for docking. cannot continue..anyone know what's up?

    What is docking?

  • Can I upgrade to Mountain Lion with Boot Camp windows 7?

    Can I upgrade my mac book pro to Mountain Lion when I have Boot Camp Windows 7?

    Welcome to the Apple Support Communities
    You can upgrade to Mountain Lion without any problem, but I recommend you to make a backup before upgrading. Also, after upgrading OS X, I recommend you to download the most recent Boot Camp drivers on Boot Camp Assistant and install the drivers on Windows

  • Boot Camped Windows 8.1 looks low quality?

    Hello,
    I just recently Boot Camped my Late 2013 Macbook Pro 15 inch so I could play Windows-based games. Everything runs fine, but the only thing that bugs me is the quality of the games, or basically any window. The resolution is fine, everything is proportioned correctly. The taskbar and the blue "frame" that surround the windows are in a crisp, HD quality. But the content inside the windows is soft, and moderately pixelated. For example, when I go the the Google homepage, on Mac, the Google logo is very crisp and looks HD. When I go to the Google homepage on my Boot Camped Windows, the logo is pixelated. Same thing goes for games. Is there any way that I can fix this? To make the games and windows look "better" in a higher quality? Thank you in advance.

    The deep search finally finished:
    And here's the text version:
    MS Data                338695552  651468152  312772601
       MS Data                340391264  653163864  312772601
       MS Data                490233848  803006448  312772601
       MS Data                490233855  803006455  312772601
       Mac HFS                490234708  491504243    1269536
    And after continue:
    And text:
    Disk /dev/rdisk0 - 251 GB / 233 GiB - 490234752 sectors (RO)
         Partition               Start        End    Size in sectors
    >D EFI System                    40     409639     409600 [EFI]
    D EFI System                    46     409645     409600 [EFI]
    D MS Data                 12844161  247217280  234373120
    D MS Data                 25922952  338695552  312772601
    D MS Data                 27618664  340391264  312772601
    D Mac HFS                 97104348  235516637  138412290
    D Mac HFS                 97154892  235567181  138412290
    D Mac HFS                174921356  176190891    1269536
    D Mac HFS                174921727  176191262    1269536
    D Mac HFS                174921894  176191429    1269536
    D Mac HFS                174922198  176191733    1269536
    D Mac HFS                174922470  176192005    1269536
    Structure: Ok.  Use Up/Down Arrow keys to select partition.
    Use Left/Right Arrow keys to CHANGE partition characteristics:

Maybe you are looking for

  • How to Get the Value in h:inputText to JavaScript?

    I have to use JSF to pop up a window from the parent window. In the popup window, I have to pass the value that is entered in a <h:inputText> back to a text field in the parent window. In order to make sure that I know the way to communicate between

  • PO output -Urgent

    Experts, I am facing a strange problem. This is related E-mail output Email id is maintained in vendor master. PO has been created without Message Output (vendor or Partner not selected in messages) So it is <b>not</b> supposed to send email to any v

  • Any Way to Speed up Mac Mini? (G4)

    Hi, I was just wondering whether you can give a speed boost to an old Mac Mini like mine. I have tried some utilities like onyx and still slow. HDD is 80 GB and I have over 40 GB free space. Maybe ram or SSD? Thanks.

  • FAGLB03 peroid balance not tallying with line items within

    Hi, When i go to FAGLB03 and tally  the balance of a recon account for a particular month with the line items in it, it does not tally This is happening for one period within the fiscal year, others period balance tally with the line items What can b

  • Configuring XI Adapters

    Hi all, I am a basis consultant, installed Netweaver 2004s (XI 3.0 on Oracle 10.2 windows platform) and having a minimum knowledge ion configuring XI I have configured SLD as per the guide and the RFC connections are woeking fine..But When ever i log