Boot Camp: x86 Windows drivers
So I installed Windows using Boot Camp. Support drivers were moved to my USB stick.
I started up driver installer, and it says that this type of file is not supported by this version of Windows. This is probably because I'm using Windows 7 Ultimate 32-bit (x86). I didn't find any x86 support drivers anywhere.
That's because you have downloaded the Boot Camp 5 drivers. Boot Camp 5 drivers are only compatible with 64-bit Windows 7 and Windows 8 versions. In order to get the correct Boot Camp version for your 32-bit Windows, download them from the Apple website > http://support.apple.com/downloads
Another option you have is to upgrade to a 64-bit Windows version
Similar Messages
-
I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp -
I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition. -
Boot Camp and Windows 7 - uncompatible drivers and BC 3.0
I recently installed Windows 7 on my MacBook Pro using Boot Camp. The installation wen well but when I inserted and tried to run the OSX setup disc, the system referred to known incompatibilities and aborted. I then tried to run the Boot Camp 3.1 driver but this also aborted, stating that Boot Camp 3.0 was missing. I have tried both the 32 and 64 bit Ultimate version and the Enterprise version of Windows 7, always with the same result. I then reinstalled Leopard (and created a mess in a number of other ways) to see if the 3.0 driver had been deleted by mistake. This did not help however. Is there anything I can do?
Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed. -
Boot camp and windows 7 but window wont find usb to download support drivers
Used Boot Camp to partition, downloaded support onto USB zip drive, installed Windows 7 fine I thought, but in Windows 7 now it will not find my USB so i can't download the support drivers from my zip drive back into Windows. No internet found either (probably because i can't download the support drivers). HELP QUICKLY please!!!
Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed. -
I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen. -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
Unable to install Boot Camp and Windows 8.1 on Mac Mini
Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
DougPoking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start. -
Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers. -
HT1461 boot camp for windows 8
I need to install the boot camp for windows 8
use bootcamp to install drivers on your usb ONLY.
reboot the computer
boot recovery hd partition. .Hold down option/alt before it turns on. the key right in the middle in control and command.
Format Drive To MBR-only in disk ulitiy Go to your hdd.It will say "Macintosh HD" Under that you see "Options" and you click that and click mbr disk or whatever.
put in your windows cd (if you can)
Reboot and Install Windows.Hold down option/alt before it turns on.Keep holding it until you see a menu.You can now put in your windows installation usb or disk if you didnt do it yet.If you dont see a cd saying Windows and EFI boot reboot it and do to same thing..Hold down option/alt before it turns on. If you do,you dont have to reboot.it is right in the middle in control and command.When your done,crate a partiton and install windows
Done.You now have windows installed,with bootcamp! -
Lion, Boot Camp and Windows 7 Issues
Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
Let me start off with my specs and then I will ask my questions:
iMac 27"
i7 Quad Core (1st gen)
16GB Ram
1TB HDD
OS X Lion (Fresh Install - Not Upgrade)
All updates for OS and iLife and other installed software:
Adobe Creative Suite CS5
MS Office 2011
Boot Camp 4.0
Window 7 Ultimate
Ok... here are my questions.
When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
However, when I resart i can hold down the ALT key and get this menu:
I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
Overview:
Why do I get the Tuxera NTFS error?
Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
I can't get Windows to update? Any ideas?
Thanks for any help you can provide.These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS. -
Boot Camp and Windows 7 Problems
I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.
-
Unable to connect to internet or print wirelessly on Boot Camp with Windows 7
I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.
-
Boot camp with windows 7 downloaded online?
I have a summer 2012 mac book pro running Mac OSX 10.7.4 (this is my first mac product, I bought it like a month ago so I know much). I am intersted in being able to boot Windows 7 though Apple Boot Camp. Windows 7 professional is avialable to me for free though my University but only by online download so I don't have a physical windows installation disk. Can I still use the free windows 7 provided by my unversity even though I don't have the installation disk? How would I do this? All the instructions i've read talks about using a windows 7 installation disk. Can my bring my Mac book pro into a genius bar for someone to help me though this? (I did purchase the 3 year apple care thing and im still within 90 days since I purchased my MBP.)
try burning window 7 to a cd first.
when you download window 7 is it in an image file? -
On boot camp and windows 7 cannot use dimmability keys on wireless apple keyboard.
Hello,
I am using boot camp under windows 7 on my mac book air.
However the dimability keys and sounds keys cannot be used with my wireless keyboard.
Do you know how to fix this ?
Many thanksThe 2007 MacBook Pro only supports 32-bit Windows 7 through Boot Camp although it has got a 64-bit processor, so buy a 32-bit Windows 7 version.
Boot Camp Assistant (in /Applications/Utilities) will guide you through the steps to install Windows through Boot Camp. Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Maybe you are looking for
-
*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum
Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum: Last Updated: Thursday July 15th, 2004 Bioses: (In order of date released.) 1.1b3 - (Download) - Pre-1.1, given to reviewers to use in their reviews and benchm
-
Starting a program from an icon icon
Is it possible to create a application which is started by an executable icon, and if so how do you do this?
-
Display total dmbtr according to mat type and month wise
hi all, i want to display total dmbtr according to mat type and month wise. like month mat.type total_dmbtr jan 2008 fert xxxxxxxxxx jan 2008 mcfe yyyyyyyy feb 2008 fert mmmmm
-
I know this is not documented or supported, but want to see if anyone can help with this workaround. I made a change to a lookup code and saved the new diagram which is Version 6. I changed the begin_date for an existing process (Version 5) so that i
-
HT4623 Under settings there is no place for software update?
Under settings there isn't a place that says software update... Why is this happening and how can itnbe fixed?