Boot Display Device suddenly changing upon reboot

This issue was first reported to Lenovo support back in February, when the latest BIOS was 2.10, and I first noticed it even earlier, with the previous BIOS version (I just don't remember whether it was 2.07 or 2.09), and back then my T61 was running Windows XP Professional SP2, and Intel GMA Driver version was 6.14.10.4860. It is stilll there with BIOS v2.21, and  Windows XP Professional SP3, and Intel GMA Driver v. 6.14.10.4926, so it seems to be a more general problem, and I would like to know whether anybody else has run into problems of this kind,
The problem description follows. I use my T61 both undocked and docked (in my Advanced Mini Dock, P\N 42W4631) at different times. I also have an HP LP1965 LCD monitor connected to my Advanced Mini Dock via a DVI-I cable. It is usually set into the portrait position; in addition, I have my desktop PC connected to the other input of that HP LP1965, and the monitor is often in use with that desktop PC when I switch my T61 on. For those reasons, I want to have Boot Display Device always set to "ThinkPad LCD" in the BIOS, in order to always be able to see POST and Windows boot progress on my T61 screen. However, whenever I set Windows to use the second display (i.e., LP1965 connected via DVI), and then reboot my T61, the Boot Display Device in BIOS settings is automatically reset to "DVI+LCD". It happens irrespectively of the way I set it to use the second display: I can switch it through either Windows display settings or Intel GMA driver tray control panel, and it can be in either extended desktop or Intel Dual Display Clone mode; in either case, as soon as I reboot my T61 (or switch it off and then on), the BIOS setting is "DVI+LCD". On the other hand, if I set Windows to use the second monitor, then reboot, set Boot Display Device to "DVI+LCD", then set Windows to use the ThinkPad display only, and reboot again, the Boot Display Device in the BIOS settings is automatically reset to "ThinkPad LCD", which may also be inconvenient for some users. I.e., to make it short, when T61 is docked, 'single monitor' configuration under Windows always forces 'ThinkPad LCD" as Boot Display Device in BIOS settings after reboot, and any 'dual monitor' configuration under Windows always forces "DVI+LCD" as Boot Display Device after reboot.
Message Edited by Maksym_Kozub on 08-17-2008 06:15 AM
T61 8898-6DG (UZ26DRT), Advanced Mini Dock; Windows XP Professional SP3 Russian

After many updates, including the latest BIOS (2.26), the problem is still there. I must say it is quite an annoyance for me.
When purchsing my T61, one of the key reasons I chose it over other brands was the idea of reliability, good support, etc. rather than performance as such. It is a pity Lenovo cannot fix nor even comment on that problem. (It was reported to Lenovo's official support long ago.)
T61 8898-6DG (UZ26DRT), Advanced Mini Dock; Windows XP Professional SP3 Russian

Similar Messages

  • Raw device owners change after reboot the server

    The raw device owner change after reboot the server. i have to adjust it manually like
    chown oracle:oinstall /dev/raw/raw*
    any idea to make it permanent after bouncing the Server?
    MY OS is RHEL4 & Rdbms 10.2.0.1

    I got my answer .
    New to Linex. Need suggestions...
    How i can create new file ? like i want to create file oracle.permission
    should i use this command
    touch <filename> or any other command?
    second i want to put these entries raw device 3, 6,7,10,11 etc
    shoud it work ? like in the oracle.permission directory?
    # ASM
    raw/raw[3671011]:oracle:dba:0660

  • Desktop Image Arbitrarily Changes Upon Reboot From Aurora to Water

    I leave my MacMini on 24/7 and tend to restart only after installing updates or new apps. This past week I must have restarted about 3 times and each time the desktop background image has changed to 'Water' even though it was previously set to 'Aurora'. I change it back and then it's fine, until the next restart.
    I'm at a loss as to what may be causing this. However, I tend to use Back to my Mac a lot (to control my mini desktop through screen sharing on my MBP) and it seems a strange coincidence that my Mini's desktop defaults to the Water background, which just so happens to be the desktop image on my MBP. Weird huh?
    Has anyone else experienced this?

    Alas, this didn't work. I made a copy of the com.apple.desktop.plist and saved a copy onto my desktop. I logged off then back on and Aurora was still there. Great. However, when I restarted my mini it changed to water upon.
    Anyother ideas - thanks.

  • Display settings change after reboot

    Thinkpad T400: 7417CTO
    Windows XP Pro w/SP3
    No docking station
    I configure the extended desktop for external monitor and thinkpad LCD (both 1280 x768).
    After I reboot for the first few seconds I see the display as pre-boot, then the displays are reconfigured for
    single image at 800x600.
    What is causing the display settings to change? 
    How do I prevent the display settings from changing?
    Thank you,
    Morris

    hey p26grinz,
    without the external monitor and after setting the display, will the setting remain ?
    have you tried uninstalling the graphic driver from your unit and then testing it with generic driver ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • How can I rename my device as it suddenly changed to a series of dashes?

    My device name in ITunes suddenly changed to a series of dashes..How can I rename my device?

    Hello marthadp
    The article below will assist with renaming your device in either iTunes or from within the device itself.
    iTunes and iOS: Change the name of your iPhone, iPad, or iPod
    http://support.apple.com/kb/ht3965
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • IMac (10.4) suddenly changed the resolution of my display

    Hi, my old iMac (10.4) suddenly changed the resolution of my display and I can not change it back. It only happens for my account, and not for the other two accounts on the same computer.
    I went to system preferences and display, but the resolution is already the highest.
    Can somebody help ?
    Thanks.

    I am sorry to bother you. I found the answer in one of these forums - Somebody had the same issue: I accidentally pressed a couple of keys and turned on the "Zoom" function - It is hidden in System Preferences / Universal Access, so difficult to find.
    Klaus1 gave the answer in this discussion: https://discussions.apple.com/message/11718411#11718411
    Thanks anyway. 

  • Satellite U200 with Win XP - Display device change utility is not working

    Hi there,
    I reckon there's nothing wrong with his installation since I experience the same problem.
    Fresh install of win XP on a U200 satellite Pro.
    WXP updated to sp3 straight away. Then downloaded all drivers baseD en serial number from toshiba website, then installed them in the same order as advised on the installation list but I get the same error installation message as sjoemie1 when I tried to install "hotkey for display device" etc.
    ANYONE KNOW HOW TO REINSTALL THOSE TWO FILES?

    Hi
    The Common Modules v6.05.00 for Win XP needs to be installed firstly.
    Furthermore there are two tools called
    *Hotkey Utilities for Display Devices v3.4.4.1-XP*
    and
    *Display Device Change v2.3.0.0*
    Both software part allows you to switch the display device from LCD to LCD+CRT or CRT mode by pressing Fn+F5
    So if you have any problems installing the first utility, forget this and try the second one.

  • My G5 iMac has a screen color problem. The color is green with lines. What can I do to repar this? Sometimes the screen will freeze and I have to reboot the computer and the screen will be normal for up to 5-6 hours and then suddenly changes back to green

    My G5 iMac has a screen color problem. The color is green with lines. What can I do to repar this? Sometimes the screen will freeze and I have to reboot the computer and the screen will be normal for up to 5-6 hours and then suddenly changes back to a greenish color.

    Try running in Safe mode.  This leaves out some video drivers.  Which results in machine not using advanced video hardware.
    for more details see:
    Look through this thread. see the second page.
    https://discussions.apple.com/message/16057567#16057567
    Robert

  • "Inaccessible Boot Device" after changing motherboard

    Ok, I know this is a known problem. Windows 2000 cannot boot up if you changed motherboard with a new chipset. I should run sysprep with my old BX motherboard before I swap it.
    But the reason why I want to upgrade my motherboard is because my old motherboard has spoiled! There is NO WAY I could run sysprep with my non-working BX motherboard!
    Is there any better way (such as utility) to force Windows 2000 to detect and install the drivers for the new chipset so that I can keep my old settings and installed programs? I don't want to install a clean Windows and reinstall everything!
    Currently, the best solutions I can find is at:
    http://www.windowsreinstall.com/install/other/motherboard/
    But it's still too troublesome....sign.
    Boon Hong.

    try booting from a win2000 CD and re-installing windows. you wont lose data or the sftware on the PC.

  • Can't boot my device OS or Bios

    hello ..
    First of all my deice is HP Pavilion 14-b109sx Ultrabook
    her's what happened ..
    well ... I just bought this new notebook ,Its really light and it booted really fast and the design is good ... problem is i wanted to make a second partition out of C partition which was more than 600 GB
    So i opened disk management from windows trying to shrink it to a 100 GB partition then make a second partition next to this one .. unfortunately windows couldn't shrink to less than 300GB ... that wasn't fine by me i needed these 200GB so i downloaded some tool that allows such a change , meaning i forced windows to take that action even when it kept telling me that its not a good idea
    that tool needed a reboot to make the change
    1-resize C partition to 100GB
    2-Create new Drive 500GB
    (numbers are not exactly as i wrote them its a little bit more i just don't remember the exact values)
    I rebooted .. when it booted again that tool had a preboot operation to change C before it's mounted .. I guess thats what happened .. i dunno.However , the tool didn't complete the job , It closed immediately and the notebook rebooted to findout windows 8 complaining and not able to start
    i thought i was the only one who came across this problem but when i googled i found out that this oftenly happen when you make any change to c partition or when you try to dual boot windows 8 with any other OS
    I did found a solution to this using a tool that does automatic repair to the C partition to get the bootmgr fixed correctly
    *** I had to enable an option from Bios called Legacy Support
    ***When that option is Enabled I must reboot to be able to get to bios again otherwise i keep booting to winodws when ipress F10 to get into Bios same as recovery and same for F9 (boot device option) i need to open up winodws and restart to be able to get into any of these
    before i get started with the repair i resized C partition as it was before Shrinking
    the tool made made me able to boot windows 8 sucssesfully  but not recovery
    when i try to boot into recovery using F11 stroke it continues booting like i did nothing at all (BTW it says System recovery mode at the lower left corner when i press F11)
    I Tried to boot into recovery from Hp recovery tool at windows but it said (Disabled : recovery partition is removed) under the recovery option so i used the same tool i used to shrink the partition to find any lost partitions on the hard drive since there was 400MB unallocated at the beggining of the HDD and it did find partition named WINRE , I restored it then the (Disabled : recovery partition is removed) note was removed and i could initiate booting into recovery mode , when i did it rebooted the notebook but i got the same result booting into windows instead .
    i found threads online saying if you hit the restart button while pressing shift key you will get to recovery menu , and it did got me into recovery menue with all the options as before but once i try to do reset or even opening command prompt i got an error with a code 80070490 asking me to restart (Like i had any other option -_-)
    At this point i should've known that I MUST ask for help before i make things even worse , but i Didn't
    I found another forum suggesting using EasyBCD to correct bootmgr settings,  I downloaded it and i found an option to automatically fix mbr settings (I love anything that says automatically ) i pressed it and rebooted
    now
    I can't get to Bios
    I can't boot Windows
    I can't boot recovery
    I can't boot anyother Device
    (I ruined it)
    that was the story of my life
    All i ever wanted was a second Partition , I didnt know it was a complicated task undwer Windows 8
    Currently i had the Legacy support Disabled so i can't even boot any other usb drive to fix this
    removing HDD is not an option (Warrenty will be void)
    There was something written about UEFI i didnt really understand it but they said it's a new alternative boot method that will replace Bios so i figured it had something to do with Bios not being able to work
    I need help ... my notebook is as useful as A brick right now ...
    If any further information is needed just tell me
    thank you

    Hello Rhythm0303
    Welcome to the HP Forums!
    I understand that the computer appears to be ruined after trying to add a partition. Unfortunately, I do have to agree with you. There is no other valid troubleshooting  can suggest. Since it is new, I would contact HP phone support for hardware assistance.
    You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • Node does not join cluster upon reboot

    Hi Guys,
    I have two servers [Sun Fire X4170] clustered together using Solaris cluster 3.3 for Oracle Database. They are connected to a shared storage which is Dell Equallogic [iSCSI]. Lately, I have ran into a weird kind of a problem where as both nodes come up fine and join the cluster upon reboot; however, when I reboot one of nodes then any of them does not join cluster and shows following errors:
    This is happening on both the nodes [if I reboot only one node at a time]. But if I reboot both the nodes at the same time then they successfully join the cluster and everything runs fine.
    Below is the output from one node which I rebooted and it did not join the cluster and puked out following errors. The other node is running fine will all the services.
    In order to get out of this situation, I have to reboot both the nodes together.
    # dmesg output #
    Apr 23 17:37:03 srvhqon11 ixgbe: [ID 611667 kern.info] NOTICE: ixgbe2: link down
    Apr 23 17:37:12 srvhqon11 iscsi: [ID 933263 kern.notice] NOTICE: iscsi connection(5) unable to connect to target SENDTARGETS_DISCOVERY
    Apr 23 17:37:12 srvhqon11 iscsi: [ID 114404 kern.notice] NOTICE: iscsi discovery failure - SendTargets (010.010.017.104)
    Apr 23 17:37:13 srvhqon11 iscsi: [ID 240218 kern.notice] NOTICE: iscsi session(9) iqn.2001-05.com.equallogic:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk online
    Apr 23 17:37:13 srvhqon11 scsi: [ID 583861 kern.info] sd11 at scsi_vhci0: unit-address g6090a0887073cf961b0ae505000030ef: g6090a0887073cf961b0ae505000030ef
    Apr 23 17:37:13 srvhqon11 genunix: [ID 936769 kern.info] sd11 is /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef
    Apr 23 17:37:13 srvhqon11 scsi: [ID 243001 kern.info] /scsi_vhci (scsi_vhci0):
    Apr 23 17:37:13 srvhqon11 /scsi_vhci/disk@g6090a0887073cf961b0ae505000030ef (sd11): Command failed to complete (3) on path iscsi0/[email protected]:0-8a0906-96cf73708-ef30000005e50a1b-sblprdbk0001,0
    Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 122153 daemon.warning] svc:/network/iscsi/initiator:default: Method or service exit timed out. Killing contract 41.
    Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 636263 daemon.warning] svc:/network/iscsi/initiator:default: Method "/lib/svc/method/iscsid start" failed due to signal KILL.
    Apr 23 17:46:54 srvhqon11 svc.startd[11]: [ID 748625 daemon.error] network/iscsi/initiator:default failed repeatedly: transitioned to maintenance (see 'svcs -xv' for details)
    Apr 24 14:50:16 srvhqon11 svc.startd[11]: [ID 694882 daemon.notice] instance svc:/system/console-login:default exited with status 1
    root@srvhqon11 # svcs -xv
    svc:/system/cluster/loaddid:default (Oracle Solaris Cluster loaddid)
    State: offline since Tue Apr 23 17:46:54 2013
    Reason: Start method is running.
    See: http://sun.com/msg/SMF-8000-C4
    See: /var/svc/log/system-cluster-loaddid:default.log
    Impact: 49 dependent services are not running:
    svc:/system/cluster/bootcluster:default
    svc:/system/cluster/cl_execd:default
    svc:/system/cluster/zc_cmd_log_replay:default
    svc:/system/cluster/sc_zc_member:default
    svc:/system/cluster/sc_rtreg_server:default
    svc:/system/cluster/sc_ifconfig_server:default
    svc:/system/cluster/initdid:default
    svc:/system/cluster/globaldevices:default
    svc:/system/cluster/gdevsync:default
    svc:/milestone/multi-user:default
    svc:/system/boot-config:default
    svc:/system/cluster/cl-svc-enable:default
    svc:/milestone/multi-user-server:default
    svc:/application/autoreg:default
    svc:/system/basicreg:default
    svc:/system/zones:default
    svc:/system/cluster/sc_zones:default
    svc:/system/cluster/scprivipd:default
    svc:/system/cluster/cl-svc-cluster-milestone:default
    svc:/system/cluster/sc_svtag:default
    svc:/system/cluster/sckeysync:default
    svc:/system/cluster/rpc-fed:default
    svc:/system/cluster/rgm-starter:default
    svc:/application/management/common-agent-container-1:default
    svc:/system/cluster/scsymon-srv:default
    svc:/system/cluster/sc_syncsa_server:default
    svc:/system/cluster/scslmclean:default
    svc:/system/cluster/cznetd:default
    svc:/system/cluster/scdpm:default
    svc:/system/cluster/rpc-pmf:default
    svc:/system/cluster/pnm:default
    svc:/system/cluster/sc_pnm_proxy_server:default
    svc:/system/cluster/cl-event:default
    svc:/system/cluster/cl-eventlog:default
    svc:/system/cluster/cl-ccra:default
    svc:/system/cluster/ql_upgrade:default
    svc:/system/cluster/mountgfs:default
    svc:/system/cluster/clusterdata:default
    svc:/system/cluster/ql_rgm:default
    svc:/system/cluster/scqdm:default
    svc:/application/stosreg:default
    svc:/application/sthwreg:default
    svc:/application/graphical-login/cde-login:default
    svc:/application/cde-printinfo:default
    svc:/system/cluster/scvxinstall:default
    svc:/system/cluster/sc_failfast:default
    svc:/system/cluster/clexecd:default
    svc:/system/cluster/sc_pmmd:default
    svc:/system/cluster/clevent_listenerd:default
    svc:/application/print/server:default (LP print server)
    State: disabled since Tue Apr 23 17:36:44 2013
    Reason: Disabled by an administrator.
    See: http://sun.com/msg/SMF-8000-05
    See: man -M /usr/share/man -s 1M lpsched
    Impact: 2 dependent services are not running:
    svc:/application/print/rfc1179:default
    svc:/application/print/ipp-listener:default
    svc:/network/iscsi/initiator:default (?)
    State: maintenance since Tue Apr 23 17:46:54 2013
    Reason: Restarting too quickly.
    See: http://sun.com/msg/SMF-8000-L5
    See: /var/svc/log/network-iscsi-initiator:default.log
    Impact: This service is not running.
    ######## Cluster Status from working node ############
    root@srvhqon10 # cluster status
    === Cluster Nodes ===
    --- Node Status ---
    Node Name Status
    srvhqon10 Online
    srvhqon11 Offline
    === Cluster Transport Paths ===
    Endpoint1 Endpoint2 Status
    srvhqon10:igb3 srvhqon11:igb3 faulted
    srvhqon10:igb2 srvhqon11:igb2 faulted
    === Cluster Quorum ===
    --- Quorum Votes Summary from (latest node reconfiguration) ---
    Needed Present Possible
    2 2 3
    --- Quorum Votes by Node (current status) ---
    Node Name Present Possible Status
    srvhqon10 1 1 Online
    srvhqon11 0 1 Offline
    --- Quorum Votes by Device (current status) ---
    Device Name Present Possible Status
    d2 1 1 Online
    === Cluster Device Groups ===
    --- Device Group Status ---
    Device Group Name Primary Secondary Status
    --- Spare, Inactive, and In Transition Nodes ---
    Device Group Name Spare Nodes Inactive Nodes In Transistion Nodes
    --- Multi-owner Device Group Status ---
    Device Group Name Node Name Status
    === Cluster Resource Groups ===
    Group Name Node Name Suspended State
    ora-rg srvhqon10 No Online
    srvhqon11 No Offline
    nfs-rg srvhqon10 No Online
    srvhqon11 No Offline
    backup-rg srvhqon10 No Online
    srvhqon11 No Offline
    === Cluster Resources ===
    Resource Name Node Name State Status Message
    ora-listener srvhqon10 Online Online
    srvhqon11 Offline Offline
    ora-server srvhqon10 Online Online
    srvhqon11 Offline Offline
    ora-stor srvhqon10 Online Online
    srvhqon11 Offline Offline
    ora-lh srvhqon10 Online Online - LogicalHostname online.
    srvhqon11 Offline Offline
    nfs-rs srvhqon10 Online Online - Service is online.
    srvhqon11 Offline Offline
    nfs-stor-rs srvhqon10 Online Online
    srvhqon11 Offline Offline
    nfs-lh-rs srvhqon10 Online Online - LogicalHostname online.
    srvhqon11 Offline Offline
    backup-stor srvhqon10 Online Online
    srvhqon11 Offline Offline
    cluster: (C383355) No response from daemon on node "srvhqon11".
    === Cluster DID Devices ===
    Device Instance Node Status
    /dev/did/rdsk/d1 srvhqon10 Ok
    /dev/did/rdsk/d2 srvhqon10 Ok
    srvhqon11 Unknown
    /dev/did/rdsk/d3 srvhqon10 Ok
    srvhqon11 Unknown
    /dev/did/rdsk/d4 srvhqon10 Ok
    /dev/did/rdsk/d5 srvhqon10 Fail
    srvhqon11 Unknown
    /dev/did/rdsk/d6 srvhqon11 Unknown
    /dev/did/rdsk/d7 srvhqon11 Unknown
    /dev/did/rdsk/d8 srvhqon10 Ok
    srvhqon11 Unknown
    /dev/did/rdsk/d9 srvhqon10 Ok
    srvhqon11 Unknown
    === Zone Clusters ===
    --- Zone Cluster Status ---
    Name Node Name Zone HostName Status Zone Status
    Regards.

    check if your global devices are mounted properly
    #cat /etc/mnttab | grep -i global
    check if proper entries are there on both systems
    #cat /etc/vfstab | grep -i global
    give output for quoram devices .
    #scstat -q
    or
    #clquorum list -v
    also check why your scsi initiator service is going offline unexpectedly
    #vi /var/svc/log/network-iscsi-initiator:default.log

  • "Desktop & Screen Saver" settings not saving upon reboot.

    "Desktop & Screen Saver" settings not saving upon reboot. Settings are always set back to factory default upon computer startup. Need help! Please!

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • "Failure configuring Windows updates. Reverting changes" - Post-reboot status 0x800f0922

    Server 2012 [6.2.9200] Standard Core
    VMWare VM running in BIOS mode (*not* UEFI)
    It is a production Read-Only Domain Controller. DC functionality is currently unaffected. Replication and diag all show 'green'
    We have an internal WSUS server and there are currently 8 pending updates:
    Security Update for Windows Server 2012 (KB2853587)
    Security Update for Windows Server 2012 (KB2923392)
    Security Update for Windows Server 2012 (KB2973501)
    Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042)
    Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577)
    Update for Windows Server 2012 (KB2995387)
    Security Update for Windows Server 2012 (KB3000061)
    Update for Windows Server 2012 (KB3000988)
    Regardless of whether I install them all at once or go through them one by one, upon reboot, I get the error message ""Failure configuring Windows updates. Reverting changes". This box has previously had updates applied successfully however
    the last successful update was prior to installing the ADDS role and promoting it to a RODC.
    ReportingEvents.log
    {A94C6378-4107-430E-9B9D-76088CE63CFF} 2014-10-17 09:30:16:165-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
    {ED5CABD7-8DB0-4C53-AFD1-E292BB5A8198} 2014-10-17 09:30:16:165-0400 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Pre-Deployment Check Reporting client status.
    {559FBACF-6FCB-4540-A999-A566C128FEAF} 2014-10-17 09:35:31:851-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
    {0C901AA0-07A7-4540-8A12-39F30770E2D5} 2014-10-17 09:35:40:665-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 0 (null) Success Content Download Download succeeded.
    {2B0E6215-61FA-4A5E-9C61-3926CA038D4C} 2014-10-17 09:35:42:256-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 0 (null) Success Content Download Download succeeded.
    {200D0802-2103-42D7-B827-D8D030CD088F} 2014-10-17 09:35:45:953-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 0 (null) Success Content Download Download succeeded.
    {BAE97C9F-94AB-4E09-8388-471B101153C3} 2014-10-17 09:35:48:418-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 0 (null) Success Content Download Download succeeded.
    {DD2DDC26-4878-4341-A624-6554B0265CB9} 2014-10-17 09:35:50:493-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 0 (null) Success Content Download Download succeeded.
    {A6036EBE-D66E-4840-B6C8-409F036106BC} 2014-10-17 09:35:56:405-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 0 (null) Success Content Download Download succeeded.
    {62F5A078-93F6-45FE-934F-E4F443E6BE69} 2014-10-17 09:35:57:029-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 0 (null) Success Content Download Download succeeded.
    {CFAE64D9-FFCA-49A7-911D-134F7307D308} 2014-10-17 09:36:01:897-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 0 (null) Success Content Download Download succeeded.
    {A3ADCF16-5037-493E-BB35-D9CB373DAA3D} 2014-10-17 09:36:03:831-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 240005 (null) Success Content Install Installation pending.
    {178EA9C2-BF23-4219-946A-66DA592F88D9} 2014-10-17 09:36:04:642-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 240005 (null) Success Content Install Installation pending.
    {15D42F71-652C-4D52-92F5-BD5453AC9E5E} 2014-10-17 09:36:06:171-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 240005 (null) Success Content Install Installation pending.
    {09EA6B96-82E0-4E60-9927-E05905FAEFEA} 2014-10-17 09:36:07:793-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 240005 (null) Success Content Install Installation pending.
    {42CEC48F-3F9D-461A-8E27-C906775E8828} 2014-10-17 09:36:09:868-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 240005 (null) Success Content Install Installation pending.
    {8726869B-6485-4754-BAD6-6F4B475F46B4} 2014-10-17 09:36:15:999-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 240005 (null) Success Content Install Installation pending.
    {409A3494-2A03-4F15-825D-1D41371DC87F} 2014-10-17 09:36:19:322-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 240005 (null) Success Content Install Installation pending.
    {52965D52-2DB3-4E88-9481-4D3D59AD52D5} 2014-10-17 09:36:26:810-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 240005 (null) Success Content Install Installation pending.
    {F43E4A5F-E53C-4554-A905-A1B41EE024E0} 2014-10-17 09:40:24:927-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Update for Windows Server 2012 (KB3000988).
    {B7504C25-377E-4FB2-83DD-6B8EF50AA081} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB3000061).
    {0B2C14FB-5000-4BFD-A06B-73AB944D7297} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Update for Windows Server 2012 (KB2995387).
    {8FDB7384-BD2B-4B29-9A12-02075A4B0A55} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577).
    {AB2869B9-963E-445B-BC05-655B1D007912} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042).
    {70C10EF0-4C29-4333-9DB3-F9F6A24E33F2} 2014-10-17 09:40:24:942-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB2973501).
    {AE7088FF-7517-46DE-ABB5-873A0B8B8B09} 2014-10-17 09:40:24:957-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB2923392).
    {3577AE7C-A861-43B6-A7B4-65383F6148F3} 2014-10-17 09:40:24:973-0400 1 182 [AGENT_INSTALLING_FAILED] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 800f0922 (null) Failure Content Install Installation Failure: Windows failed to install the following update with error 0x800f0922: Security Update for Windows Server 2012 (KB2853587).
    {FE35AF71-70B3-4637-AED1-F2F9CBF2B282} 2014-10-17 10:08:14:141-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
    {CBD02322-EA98-4C5C-8DD2-137FFAC595B7} 2014-10-17 10:08:14:141-0400 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Pre-Deployment Check Reporting client status.
    I have taken the following steps based on research without success:
    Restarted the box - try again
    Complete shutdown - try again
    verified with my VMWare admins that there is no 'Secure Boot' or similar option set on the VM
    Shutdown wuauserv, renamed SoftwareDistribution, started the service back up, reattempt
    installed, but did not enable/configure, BitLocker Drive Encryption feature
    sfc /scannow - no errors found
    dism /online /cleanup-image /checkhealth and /scanhealth - neither found any issues
    verified that the 'System Reserved Partition' is the correct size (350MB) and has free space (115MB)
    deactivated the OS license, reactivated the OS license - no change
    Pointed to the MS Windows Update servers instead of local WSUS
    I have a little flexibility in how I repair this box. Given that DC functionality is unaffected and that this specific DC is not used heavily I want to try to repair it rather than wipe it out and rebuild it. I have not yet attempted to run updates on our
    other, non-Read-Only DCs. If I run in to the same problem on them, I won't have as much leeway so I want to try to come up with a repair process if needed. I also have some concern regarding my ability to demote it from it's DC role given its current state.
    There is nothing to indicate that that would also be a problem, but I would prefer to get it in working order before attempting a demotion.
    Any help and insight would be greatly appreciated.
    Full WindowsUpdate.log to follow due to post size restrictions.
    Justin Cervero - MS Enterprise Admin - Appalachian State University

    Pre-Reboot WindowsUpdate.log
    Misc =========== Logging initialized (build: 7.8.9200.17099, tz: -0400) ===========
    Misc = Process: C:\Windows\system32\svchost.exe
    Misc = Module: c:\windows\system32\wuaueng.dll
    Service *************
    Service ** START ** Service: Service startup
    Service *********
    Agent * WU client version 7.8.9200.17099
    Agent * Base directory: C:\Windows\SoftwareDistribution
    Agent * Access type: No proxy
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    Agent * Network state: Connected
    Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
    DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
    DtaStor Data store successfully created
    Agent *********** Agent: Initializing global settings cache ***********
    Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    Agent * WSUS server: http://wsusserver
    Agent * WSUS status server: http://wsusserver
    Agent * Target group: Systems
    Agent * Windows Update access disabled: No
    Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
    WuTask WuTaskManager delay initialize completed successfully..
    Report CWERReporter::Init succeeded
    Agent *********** Agent: Initializing Windows Update Agent ***********
    DnldMgr Download manager restoring 0 downloads
    AU ########### AU: Initializing Automatic Updates ###########
    AU AIR Mode is disabled
    AU # Policy Driven Provider: http://wsusserver
    AU # Detection frequency: 22
    AU # Target group: Systems
    AU # Approval type: Pre-install notify (Policy)
    AU # Auto-install minor updates: No (User preference)
    AU # Will interact with non-admins (Non-admins are elevated (Policy))
    AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    AU AU finished delayed initialization
    Misc =========== Logging initialized (build: 7.8.9200.17099, tz: -0400) ===========
    Misc = Process: C:\Windows\System32\cscript.exe
    Misc = Module: C:\Windows\System32\wuapi.dll
    COMAPI -------------
    COMAPI -- START -- COMAPI: Init Search [ClientId = <NULL>]
    COMAPI ---------
    COMAPI -------------
    COMAPI -- START -- COMAPI: Search [ClientId = <NULL>]
    COMAPI ---------
    Report *********** Report: Initializing static reporting data ***********
    Report * OS Version = 6.2.9200.0.0.131344
    Report * OS Product Type = 0x00000007
    Report * Computer Brand = VMware, Inc.
    Report * Computer Model = VMware Virtual Platform
    Report * Platform Role = 1
    Report * AlwaysOn/AlwaysConnected (AOAC) = 0
    Report * Bios Revision = 6.00
    Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
    Report * Bios Release Date = 2013-07-30T00:00:00
    Report * Bios Sku Number unavailable.
    Report * Bios Vendor = Phoenix Technologies LTD
    Report * Bios Family unavailable.
    Report * Bios Major Release = 4
    Report * Bios Minor Release = 6
    Report * Locale ID = 1033
    COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
    Agent *************
    Agent ** START ** Agent: Finding updates [CallerId = ]
    Agent *********
    Agent * Online = Yes; Ignore download priority = No
    Agent * Criteria = "IsInstalled=0 and Type='Software'"
    Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
    Agent * Search Scope = {Machine}
    Agent * Caller SID for Applicability: S-1-5-21-3125904992-2106718063-2989486192-100700
    EP Got WSUS Client/Server URL: "http://wsusserver/ClientWebService/client.asmx"
    PT +++++++++++ PT: Synchronizing server updates +++++++++++
    PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusserver/ClientWebService/client.asmx
    PT WARNING: Cached cookie has expired or new PID is available
    EP Got WSUS SimpleTargeting URL: "http://wsusserver"
    PT Initializing simple targeting cookie, clientId = 5cb617c5-4bcc-44a6-a8bc-6f5d116a9dc3, target group = Systems, DNS name = rodcserver
    PT Server URL = http://wsusserver/SimpleAuthWebService/SimpleAuth.asmx
    Driver WARNING: No system hardware ids found
    PT +++++++++++ PT: Synchronizing extended update info +++++++++++
    PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusserver/ClientWebService/client.asmx
    Agent * Added update {CD2A752F-FF51-46A5-8134-54DD0AE32D2A}.202 to search result
    Agent * Added update {4193EAE0-AE33-4774-B479-D9660D15E5F2}.201 to search result
    Agent * Added update {2346EB42-185C-49CC-9856-190C294FE502}.202 to search result
    Agent * Added update {8001616A-1D31-4D17-B3DC-861E3CE0C3E3}.202 to search result
    Agent * Added update {C822D00A-FEC3-4B65-8F63-6E6BEA292944}.203 to search result
    Agent * Added update {FD33CBA9-736E-4E42-8FC6-91F5534670C6}.200 to search result
    Agent * Added update {DF82A201-7E54-420E-A08C-3281F731C3D7}.202 to search result
    Agent * Added update {957ACF74-78FB-4045-91E5-A8714DD0915F}.200 to search result
    Agent * Found 8 updates and 73 categories in search; evaluated appl. rules of 693 out of 1048 deployed entities
    Agent Reporting status event with 8 installable, 92 installed, 0 installed pending, 0 failed and 0 downloaded updates
    Agent *********
    Agent ** END ** Agent: Finding updates [CallerId = ]
    Agent *************
    Report REPORT EVENT: {A4CA39D6-71D6-48DB-B678-7A793B95B2A0} 2014-10-16 21:01:20:736-0400 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Software Synchronization Windows Update Client successfully detected 8 updates.
    Report REPORT EVENT: {3F841CDC-22AC-4A45-8A6A-C426A1CA65C9} 2014-10-16 21:01:20:736-0400 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 (null) Success Pre-Deployment Check Reporting client status.
    COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
    Report CWERReporter finishing event handling. (00000000)
    COMAPI - Updates found = 8
    COMAPI ---------
    COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
    COMAPI -------------
    COMAPI -------------
    COMAPI -- START -- COMAPI: Download [ClientId = <NULL>]
    COMAPI ---------
    COMAPI - Forced: No; Download priority: 3; Network Cost Policy: 0
    COMAPI - Updates in request: 8
    COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    COMAPI <<-- SUBMITTED -- COMAPI: Download [ClientId = <NULL>]
    DnldMgr *********** DnldMgr: Begin Downloading Updates [CallerId = ] ***********
    DnldMgr * Call ID = {BD88591F-3074-490D-8D97-2D2018AA40F0}
    DnldMgr * Priority = 3, NetworkCostPolicy = 0, Interactive = 1, Owner is system = 0, Explicit proxy = 1, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
    DnldMgr * Updates to download = 8
    Agent * Title = Security Update for Windows Server 2012 (KB2853587)
    Agent * UpdateId = {CD2A752F-FF51-46A5-8134-54DD0AE32D2A}.202
    Agent * Bundles 1 updates:
    Agent * {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
    Agent * Title = Security Update for Windows Server 2012 (KB2923392)
    Agent * UpdateId = {4193EAE0-AE33-4774-B479-D9660D15E5F2}.201
    Agent * Bundles 1 updates:
    Agent * {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
    Agent * Title = Security Update for Windows Server 2012 (KB2973501)
    Agent * UpdateId = {2346EB42-185C-49CC-9856-190C294FE502}.202
    Agent * Bundles 1 updates:
    Agent * {041EDA5D-FF28-450B-AA8C-557161884100}.201
    Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042)
    Agent * UpdateId = {8001616A-1D31-4D17-B3DC-861E3CE0C3E3}.202
    Agent * Bundles 1 updates:
    Agent * {5CFECF17-2661-4D81-9211-6B85CF760867}.202
    Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577)
    Agent * UpdateId = {C822D00A-FEC3-4B65-8F63-6E6BEA292944}.203
    Agent * Bundles 1 updates:
    Agent * {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
    Agent * Title = Update for Windows Server 2012 (KB2995387)
    Agent * UpdateId = {FD33CBA9-736E-4E42-8FC6-91F5534670C6}.200
    Agent * Bundles 1 updates:
    Agent * {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
    Agent * Title = Security Update for Windows Server 2012 (KB3000061)
    Agent * UpdateId = {DF82A201-7E54-420E-A08C-3281F731C3D7}.202
    Agent * Bundles 1 updates:
    Agent * {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
    Agent * Title = Update for Windows Server 2012 (KB3000988)
    Agent * UpdateId = {957ACF74-78FB-4045-91E5-A8714DD0915F}.200
    Agent * Bundles 1 updates:
    Agent * {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
    DnldMgr No locked revisions found for update CD2A752F-FF51-46A5-8134-54DD0AE32D2A; locking the user-specified revision.
    DnldMgr Adding revision ID 202 for update CD2A752F-FF51-46A5-8134-54DD0AE32D2A to the lock revision cache.
    DnldMgr No locked revisions found for update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE; locking the user-specified revision.
    DnldMgr Adding revision ID 202 for update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE to the lock revision cache.
    DnldMgr No locked revisions found for update 4193EAE0-AE33-4774-B479-D9660D15E5F2; locking the user-specified revision.
    DnldMgr Adding revision ID 201 for update 4193EAE0-AE33-4774-B479-D9660D15E5F2 to the lock revision cache.
    DnldMgr No locked revisions found for update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6; locking the user-specified revision.
    DnldMgr Adding revision ID 201 for update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6 to the lock revision cache.
    DnldMgr No locked revisions found for update 2346EB42-185C-49CC-9856-190C294FE502; locking the user-specified revision.
    DnldMgr Adding revision ID 202 for update 2346EB42-185C-49CC-9856-190C294FE502 to the lock revision cache.
    DnldMgr No locked revisions found for update 041EDA5D-FF28-450B-AA8C-557161884100; locking the user-specified revision.
    DnldMgr Adding revision ID 201 for update 041EDA5D-FF28-450B-AA8C-557161884100 to the lock revision cache.
    DnldMgr No locked revisions found for update 8001616A-1D31-4D17-B3DC-861E3CE0C3E3; locking the user-specified revision.
    DnldMgr Adding revision ID 202 for update 8001616A-1D31-4D17-B3DC-861E3CE0C3E3 to the lock revision cache.
    DnldMgr No locked revisions found for update 5CFECF17-2661-4D81-9211-6B85CF760867; locking the user-specified revision.
    DnldMgr Adding revision ID 202 for update 5CFECF17-2661-4D81-9211-6B85CF760867 to the lock revision cache.
    DnldMgr No locked revisions found for update C822D00A-FEC3-4B65-8F63-6E6BEA292944; locking the user-specified revision.
    DnldMgr Adding revision ID 203 for update C822D00A-FEC3-4B65-8F63-6E6BEA292944 to the lock revision cache.
    DnldMgr No locked revisions found for update 0D796BFF-1B7A-41D0-9E20-D7087F570410; locking the user-specified revision.
    DnldMgr Adding revision ID 201 for update 0D796BFF-1B7A-41D0-9E20-D7087F570410 to the lock revision cache.
    DnldMgr No locked revisions found for update FD33CBA9-736E-4E42-8FC6-91F5534670C6; locking the user-specified revision.
    DnldMgr Adding revision ID 200 for update FD33CBA9-736E-4E42-8FC6-91F5534670C6 to the lock revision cache.
    DnldMgr No locked revisions found for update D5D6C690-7BCA-441B-9319-3278EB1E55AE; locking the user-specified revision.
    DnldMgr Adding revision ID 200 for update D5D6C690-7BCA-441B-9319-3278EB1E55AE to the lock revision cache.
    DnldMgr No locked revisions found for update DF82A201-7E54-420E-A08C-3281F731C3D7; locking the user-specified revision.
    DnldMgr Adding revision ID 202 for update DF82A201-7E54-420E-A08C-3281F731C3D7 to the lock revision cache.
    DnldMgr No locked revisions found for update E396BB10-86E0-4C7D-8E26-8B864103FE74; locking the user-specified revision.
    DnldMgr Adding revision ID 201 for update E396BB10-86E0-4C7D-8E26-8B864103FE74 to the lock revision cache.
    DnldMgr No locked revisions found for update 957ACF74-78FB-4045-91E5-A8714DD0915F; locking the user-specified revision.
    DnldMgr Adding revision ID 200 for update 957ACF74-78FB-4045-91E5-A8714DD0915F to the lock revision cache.
    DnldMgr No locked revisions found for update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908; locking the user-specified revision.
    DnldMgr Adding revision ID 200 for update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908 to the lock revision cache.
    EP Got WSUS Client/Server URL: "http://wsusserver/ClientWebService/client.asmx"
    PT +++++++++++ PT: Synchronizing file locations +++++++++++
    PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusserver/ClientWebService/client.asmx
    DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
    Handler Generating request for CBS update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE in sandbox C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb2853587-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {B74E24AD-0BC1-4F12-8562-2EACC741B4B3}
    DnldMgr * Downloading from http://wsusserver/Content/DD/E5743ACAD2AEFCD99979F1680501AD9D120A0BDD.cab to C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530\windows8-rt-kb2853587-x64.cab (full file).
    DnldMgr *********
    DnldMgr ** END ** DnldMgr: Begin Downloading Updates [CallerId = ]
    DnldMgr *************
    DnldMgr BITS job {B74E24AD-0BC1-4F12-8562-2EACC741B4B3} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530\windows8-rt-kb2853587-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 58979, bytes transferred = 58979
    DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
    Handler Generating request for CBS update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE in sandbox C:\Windows\SoftwareDistribution\Download\8c62f0bd9a2a79c738ff67ff2d3dc530
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
    Handler Generating request for CBS update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6 in sandbox C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb2923392-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {810D170F-D6E6-494B-98F9-6EA8EAAFB70C}
    DnldMgr * Downloading from http://wsusserver/Content/56/2CAD1BFE488CF3B0EB93F48400A542CB72965056.cab to C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7\windows8-rt-kb2923392-x64.cab (full file).
    DnldMgr BITS job {810D170F-D6E6-494B-98F9-6EA8EAAFB70C} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7\windows8-rt-kb2923392-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 500177, bytes transferred = 500177
    DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
    Handler Generating request for CBS update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6 in sandbox C:\Windows\SoftwareDistribution\Download\0d3ba17529129e6f7a167d67d018a0a7
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {041EDA5D-FF28-450B-AA8C-557161884100}.201
    Handler Generating request for CBS update 041EDA5D-FF28-450B-AA8C-557161884100 in sandbox C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb2973501-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {5D9BAB80-C055-4BB5-A445-58D78D37D7AA}
    DnldMgr * Downloading from http://wsusserver/Content/D3/05BDA5A7A88A70739E71C166263CC40C45A2ADD3.cab to C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de\windows8-rt-kb2973501-x64.cab (full file).
    DnldMgr BITS job {5D9BAB80-C055-4BB5-A445-58D78D37D7AA} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de\windows8-rt-kb2973501-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 8580759, bytes transferred = 8580759
    DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {041EDA5D-FF28-450B-AA8C-557161884100}.201
    Handler Generating request for CBS update 041EDA5D-FF28-450B-AA8C-557161884100 in sandbox C:\Windows\SoftwareDistribution\Download\debc00fbc52d73e267c6bc2e1d2d04de
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {5CFECF17-2661-4D81-9211-6B85CF760867}.202
    Handler Generating request for CBS update 5CFECF17-2661-4D81-9211-6B85CF760867 in sandbox C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb2978042-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {717CEFF6-05A0-4E81-83EC-DD900B1D675E}
    DnldMgr * Downloading from http://wsusserver/Content/8B/E6C82EE971D152ADB9DEC1906EA9D53D7638328B.cab to C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4\windows8-rt-kb2978042-x64.cab (full file).
    DnldMgr BITS job {717CEFF6-05A0-4E81-83EC-DD900B1D675E} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4\windows8-rt-kb2978042-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 2951091, bytes transferred = 2951091
    DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {5CFECF17-2661-4D81-9211-6B85CF760867}.202
    Handler Generating request for CBS update 5CFECF17-2661-4D81-9211-6B85CF760867 in sandbox C:\Windows\SoftwareDistribution\Download\68f04df682752774f0b5441ae642a9a4
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
    Handler Generating request for CBS update 0D796BFF-1B7A-41D0-9E20-D7087F570410 in sandbox C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb2979577-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {F801B6AB-04F3-4783-8E64-C5E816022C6A}
    DnldMgr * Downloading from http://wsusserver/Content/DE/02C29E96F798623EDDB7ADDA4C53C80C705455DE.cab to C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57\windows8-rt-kb2979577-x64.cab (full file).
    DnldMgr BITS job {F801B6AB-04F3-4783-8E64-C5E816022C6A} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57\windows8-rt-kb2979577-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 969469, bytes transferred = 969469
    DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
    Handler Generating request for CBS update 0D796BFF-1B7A-41D0-9E20-D7087F570410 in sandbox C:\Windows\SoftwareDistribution\Download\9fea4aca66b4c2de886ddcea9c313b57
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
    Handler Generating request for CBS update D5D6C690-7BCA-441B-9319-3278EB1E55AE in sandbox C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb2995387-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {4E0BFB47-4E72-418A-AB0E-8F342AE5DB56}
    DnldMgr * Downloading from http://wsusserver/Content/A9/6CB3E80BD08277A99B0A11D90DD2081B34B82BA9.cab to C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75\windows8-rt-kb2995387-x64.cab (full file).
    Report REPORT EVENT: {C61B89A2-C92F-45C0-9955-E07145849911} 2014-10-16 21:01:32:874-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {9DB84D85-ED5E-47EF-B397-16AD39A03D70} 2014-10-16 21:01:32:998-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {E0940842-C059-4B40-BE78-27E063853CB1} 2014-10-16 21:01:33:342-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {30E65A27-7451-48DE-839E-83CA4E1A6927} 2014-10-16 21:01:33:544-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {95C04AD5-642D-4002-9CB5-8B4231C46837} 2014-10-16 21:01:33:700-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 0 (null) Success Content Download Download succeeded.
    Report CWERReporter finishing event handling. (00000000)
    DnldMgr BITS job {4E0BFB47-4E72-418A-AB0E-8F342AE5DB56} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75\windows8-rt-kb2995387-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 20260063, bytes transferred = 20260063
    DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
    Handler Generating request for CBS update D5D6C690-7BCA-441B-9319-3278EB1E55AE in sandbox C:\Windows\SoftwareDistribution\Download\2018d4c85979fa8f21eb9e2fecda5f75
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
    Handler Generating request for CBS update E396BB10-86E0-4C7D-8E26-8B864103FE74 in sandbox C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb3000061-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {E47CFB47-5B8F-4A37-B639-0C2386F033FA}
    DnldMgr * Downloading from http://wsusserver/Content/2B/30A068C8F4A986FB1DA95E6C16A8376927D6332B.cab to C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432\windows8-rt-kb3000061-x64.cab (full file).
    DnldMgr BITS job {E47CFB47-5B8F-4A37-B639-0C2386F033FA} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432\windows8-rt-kb3000061-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 2323339, bytes transferred = 2323339
    DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
    Handler Generating request for CBS update E396BB10-86E0-4C7D-8E26-8B864103FE74 in sandbox C:\Windows\SoftwareDistribution\Download\47d1a26b6ef9995305b237cc1c7f3432
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
    Handler Generating request for CBS update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908 in sandbox C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsStart
    Handler Adding windows8-rt-kb3000988-x64.cab (entire file) to request list.
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
    DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
    DnldMgr * BITS job initialized, JobId = {C51DECC8-58EF-45BA-A4E0-1849221356A6}
    DnldMgr * Downloading from http://wsusserver/Content/1D/CA446010058397415CCD8CDC80C2B9F1AA04C11D.cab to C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e\windows8-rt-kb3000988-x64.cab (full file).
    DnldMgr BITS job {C51DECC8-58EF-45BA-A4E0-1849221356A6} completed successfully
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e\windows8-rt-kb3000988-x64.cab with dwProvFlags 0x00000080:
    Misc Microsoft signed: Yes
    DnldMgr Download job bytes total = 9959275, bytes transferred = 9959275
    DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
    DnldMgr * Queueing update for download handler request generation.
    DnldMgr Generating download request for update {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
    Handler Generating request for CBS update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908 in sandbox C:\Windows\SoftwareDistribution\Download\5758d9b681af82eac26404b1316f8e5e
    Handler Selecting self-contained because update has express payload but server doesn't support it.
    Handler Selected payload type is ptSelfContained
    Handler Detected download state is dsHavePackage
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
    DnldMgr *********** DnldMgr: New download job [UpdateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200] ***********
    DnldMgr * All files for update were already downloaded and are valid.
    COMAPI >>-- RESUMED -- COMAPI: Download [ClientId = <NULL>]
    COMAPI - Download call complete (succeeded = 8, succeeded with errors = 0, failed = 0, unaccounted = 0)
    COMAPI ---------
    COMAPI -- END -- COMAPI: Download [ClientId = <NULL>]
    COMAPI -------------
    COMAPI -------------
    COMAPI -- START -- COMAPI: Install [ClientId = <NULL>]
    COMAPI ---------
    COMAPI - Allow source prompts: Yes; Forced: No; Force quiet: No; Attempt close apps if necessary: No
    COMAPI - Updates in request: 8
    COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    Agent Beginning install of conventional work item
    COMAPI - Updates to install = 8
    COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = <NULL>]
    Agent *************
    Agent ** START ** Agent: Installing updates [CallerId = ]
    Agent *********
    Agent * Updates to install = 8
    Agent * Title = Security Update for Windows Server 2012 (KB2853587)
    Agent * UpdateId = {CD2A752F-FF51-46A5-8134-54DD0AE32D2A}.202
    Agent * Bundles 1 updates:
    Agent * {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202
    Agent * Title = Security Update for Windows Server 2012 (KB2923392)
    Agent * UpdateId = {4193EAE0-AE33-4774-B479-D9660D15E5F2}.201
    Agent * Bundles 1 updates:
    Agent * {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201
    Agent * Title = Security Update for Windows Server 2012 (KB2973501)
    Agent * UpdateId = {2346EB42-185C-49CC-9856-190C294FE502}.202
    Agent * Bundles 1 updates:
    Agent * {041EDA5D-FF28-450B-AA8C-557161884100}.201
    Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978042)
    Agent * UpdateId = {8001616A-1D31-4D17-B3DC-861E3CE0C3E3}.202
    Agent * Bundles 1 updates:
    Agent * {5CFECF17-2661-4D81-9211-6B85CF760867}.202
    Agent * Title = Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2979577)
    Agent * UpdateId = {C822D00A-FEC3-4B65-8F63-6E6BEA292944}.203
    Agent * Bundles 1 updates:
    Agent * {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201
    Agent * Title = Update for Windows Server 2012 (KB2995387)
    Agent * UpdateId = {FD33CBA9-736E-4E42-8FC6-91F5534670C6}.200
    Agent * Bundles 1 updates:
    Agent * {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200
    Agent * Title = Security Update for Windows Server 2012 (KB3000061)
    Agent * UpdateId = {DF82A201-7E54-420E-A08C-3281F731C3D7}.202
    Agent * Bundles 1 updates:
    Agent * {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201
    Agent * Title = Update for Windows Server 2012 (KB3000988)
    Agent * UpdateId = {957ACF74-78FB-4045-91E5-A8714DD0915F}.200
    Agent * Bundles 1 updates:
    Agent * {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200
    Handler Attempting to create remote handler process as myuser in session 2
    DnldMgr Preparing update for install, updateId = {1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE}.202.
    Misc =========== Logging initialized (build: 7.8.9200.17099, tz: -0400) ===========
    Misc = Process: C:\Windows\system32\wuauclt.exe
    Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update 1AAF7D9A-3BFF-4DA1-8809-E120E4B5EECE
    Handler CBS session identity: 30402981_3864500492
    Handler CBS package identity: Package_for_KB2853587~31bf3856ad364e35~amd64~~6.2.1.1
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\c21818e00e3275900ed08a1e2ff5db7f\windows8-rt-kb2853587-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\c21818e00e3275900ed08a1e2ff5db7f\inst
    Handler Requesting post-reboot reporting for package Package_for_KB2853587~31bf3856ad364e35~amd64~~6.2.1.1.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6}.201.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update 86CCFF78-28E7-4C1A-98E6-2B2C762D4BB6
    Handler CBS session identity: 30402981_3878852909
    Handler CBS package identity: Package_for_KB2923392~31bf3856ad364e35~amd64~~6.2.1.1
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\e5fa293e91f546a672ac78699659796b\windows8-rt-kb2923392-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\e5fa293e91f546a672ac78699659796b\inst
    Report REPORT EVENT: {4E21F200-6A83-4346-804A-1A4F34A308DE} 2014-10-16 21:01:34:356-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {A506EF29-8D86-44D8-80A8-BD4C49FBD6D5} 2014-10-16 21:01:34:527-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {B24BAB44-6287-4C91-87B3-A1A3B135A5AE} 2014-10-16 21:01:34:855-0400 1 162 [AGENT_DOWNLOAD_SUCCEEDED] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 0 (null) Success Content Download Download succeeded.
    Report REPORT EVENT: {ABA9513E-9FDF-4195-9061-D886BAB2F448} 2014-10-16 21:01:37:476-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {CD2A752F-FF51-46A5-8134-54DD0AE32D2A} 202 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    Handler Requesting post-reboot reporting for package Package_for_KB2923392~31bf3856ad364e35~amd64~~6.2.1.1.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {041EDA5D-FF28-450B-AA8C-557161884100}.201.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update 041EDA5D-FF28-450B-AA8C-557161884100
    Handler CBS session identity: 30402981_3898977768
    Handler CBS package identity: Package_for_KB2973501~31bf3856ad364e35~amd64~~6.2.1.4
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\85932643c90c0498263f0303ff003e2d\windows8-rt-kb2973501-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\85932643c90c0498263f0303ff003e2d\inst
    Report REPORT EVENT: {54547F34-7356-49A5-BE8F-384636863D8F} 2014-10-16 21:01:39:473-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {4193EAE0-AE33-4774-B479-D9660D15E5F2} 201 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    Handler Requesting post-reboot reporting for package Package_for_KB2973501~31bf3856ad364e35~amd64~~6.2.1.4.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {5CFECF17-2661-4D81-9211-6B85CF760867}.202.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update 5CFECF17-2661-4D81-9211-6B85CF760867
    Handler CBS session identity: 30402981_3996325907
    Handler CBS package identity: Package_for_KB2978042~31bf3856ad364e35~amd64~~6.2.1.0
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\66f978e263d5de45076a28c052dd7777\windows8-rt-kb2978042-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\66f978e263d5de45076a28c052dd7777\inst
    Handler Requesting post-reboot reporting for package Package_for_KB2978042~31bf3856ad364e35~amd64~~6.2.1.0.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {0D796BFF-1B7A-41D0-9E20-D7087F570410}.201.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update 0D796BFF-1B7A-41D0-9E20-D7087F570410
    Handler CBS session identity: 30402981_4035015583
    Handler CBS package identity: Package_for_KB2979577~31bf3856ad364e35~amd64~~6.2.1.1
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\3e28b9501903e8c5723f4b8e55d15df8\windows8-rt-kb2979577-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\3e28b9501903e8c5723f4b8e55d15df8\inst
    Report REPORT EVENT: {0EA6046F-846C-4C19-93EA-AB0E71B76F52} 2014-10-16 21:01:49:207-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {2346EB42-185C-49CC-9856-190C294FE502} 202 240005 (null) Success Content Install Installation pending.
    Report REPORT EVENT: {E0203371-F1E3-4FE2-8D7A-7DED17BE48F1} 2014-10-16 21:01:53:092-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {8001616A-1D31-4D17-B3DC-861E3CE0C3E3} 202 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    Handler Requesting post-reboot reporting for package Package_for_KB2979577~31bf3856ad364e35~amd64~~6.2.1.1.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {D5D6C690-7BCA-441B-9319-3278EB1E55AE}.200.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update D5D6C690-7BCA-441B-9319-3278EB1E55AE
    Handler CBS session identity: 30402981_4075265308
    Handler CBS package identity: Package_for_KB2995387~31bf3856ad364e35~amd64~~6.2.1.2
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\5c380797af1ae165bf813d087411c52a\windows8-rt-kb2995387-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\5c380797af1ae165bf813d087411c52a\inst
    Report REPORT EVENT: {3F463EB9-DA95-46B4-9FA0-AEA26AFE9AC7} 2014-10-16 21:01:57:101-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {C822D00A-FEC3-4B65-8F63-6E6BEA292944} 203 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    Handler Requesting post-reboot reporting for package Package_for_KB2995387~31bf3856ad364e35~amd64~~6.2.1.2.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {E396BB10-86E0-4C7D-8E26-8B864103FE74}.201.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update E396BB10-86E0-4C7D-8E26-8B864103FE74
    Handler CBS session identity: 30402981_4242192660
    Handler CBS package identity: Package_for_KB3000061~31bf3856ad364e35~amd64~~6.2.1.2
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\792e73d5df6aed16fbb300b8eb82dd6e\windows8-rt-kb3000061-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\792e73d5df6aed16fbb300b8eb82dd6e\inst
    Report REPORT EVENT: {2EBB3A05-7213-40EC-B38E-209493B8019D} 2014-10-16 21:02:13:810-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {FD33CBA9-736E-4E42-8FC6-91F5534670C6} 200 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    Handler Requesting post-reboot reporting for package Package_for_KB3000061~31bf3856ad364e35~amd64~~6.2.1.2.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    DnldMgr Preparing update for install, updateId = {7380A2AB-4BC4-476C-8AAF-8A045C6BA908}.200.
    Handler :::::::::::::
    Handler :: START :: Handler: CBS Install
    Handler :::::::::
    Handler Starting install of CBS update 7380A2AB-4BC4-476C-8AAF-8A045C6BA908
    Handler CBS session identity: 30402982_579441
    Handler CBS package identity: Package_for_KB3000988~31bf3856ad364e35~amd64~~6.2.1.1
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\a7c10dd1ff9315f43981eefa8c4fa1c7\windows8-rt-kb3000988-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\a7c10dd1ff9315f43981eefa8c4fa1c7\inst
    Report REPORT EVENT: {1C3D36EC-A8EA-4D6A-9919-A3975E5AD2F4} 2014-10-16 21:02:19:130-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {DF82A201-7E54-420E-A08C-3281F731C3D7} 202 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    Handler Requesting post-reboot reporting for package Package_for_KB3000988~31bf3856ad364e35~amd64~~6.2.1.1.
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    Handler :::::::::
    Handler :: END :: Handler: CBS Install
    Handler :::::::::::::
    AU Preventing expiration of polled reporting events until next restart
    RebootNotify UpdateRebootRequiredNotification, set reboot grace timeout reg value SecurityUpdatesRebootRequiredNotificationTime to 2014-10-20 01:02:33
    Agent *********
    Agent ** END ** Agent: Installing updates [CallerId = ]
    Agent *************
    COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = <NULL>]
    COMAPI - Install call complete (succeeded = 8, succeeded with errors = 0, failed = 0, unaccounted = 0)
    COMAPI - Reboot required = Yes
    COMAPI ---------
    COMAPI -- END -- COMAPI: Install [ClientId = <NULL>]
    COMAPI -------------
    Report REPORT EVENT: {3080CEFC-A045-48BA-A639-1D323FE053B8} 2014-10-16 21:02:33:077-0400 1 201 [AGENT_INSTALLING_PENDING] 101 {957ACF74-78FB-4045-91E5-A8714DD0915F} 200 240005 (null) Success Content Install Installation pending.
    Report CWERReporter finishing event handling. (00000000)
    EP Got WSUS Client/Server URL: "http://wsusserver/ClientWebService/client.asmx"
    PT WARNING: Cached cookie has expired or new PID is available
    EP Got WSUS SimpleTargeting URL: "http://wsusserver"
    PT Initializing simple targeting cookie, clientId = 5cb617c5-4bcc-44a6-a8bc-6f5d116a9dc3, target group = Systems, DNS name = rodcserver
    PT Server URL = http://wsusserver/SimpleAuthWebService/SimpleAuth.asmx
    EP Got WSUS Reporting URL: "http://wsusserver/ReportingWebService/ReportingWebService.asmx"
    Report Uploading 18 events using cached cookie, reporting URL = http://wsusserver/ReportingWebService/ReportingWebService.asmx
    Report Reporter successfully uploaded 18 events.
    Shutdwn Checking to see whether install at shutdown is appropriate
    Shutdwn user declined update at shutdown
    AU AU initiates service shutdown
    AU ########### AU: Uninitializing Automatic Updates ###########
    WuTask Uninit WU Task Manager
    Agent Sending shutdown notification to client
    Report CWERReporter finishing event handling. (00000000)
    Service *********
    Service ** END ** Service: Service exit [Exit code = 0x240001]
    Service *************
    Justin Cervero - MS Enterprise Admin - Appalachian State University

  • Possible to move boot display to different DVI port? (GTX780)

    I doubt this is possible, but just in case : is it possible to force boot screens to a different port on the video card?
    The MSI GTX780 has two DVI ports - one DVI-I (which includes analog display) and DVI-D (which does not). The DVI-I port displays the boot screen, BIOS, and anything that shows before Windows is fully loaded.
    I currently have two monitors. My primary monitor can connect via DVI, and since it is a 120HZ monitor, it currently uses a dual link cable. The secondary monitor is older and cannot connect via DVI, so I use a DVI-I-to-VGA adapter and a standard VGA cable for that display. Unfortunately, this means that the secondary monitor shows boot/BIOS/etc.
    Is it possible to move the boot display to the DVI-D port on the card?
    Please note that this is not a big issue - having the secondary monitor show boot info is a minor annoyance at worst. The secondary monitor also has HDMI-in, so I can buy a cable and use that, and then move the primary monitor to the DVI-I port. I do want to avoid spending more money, but mostly, I want to see if it is possible to force the boot screens to another port. This seems like it might be a very interesting way to learn about the video card (and VBIOS, if changing that is necessary to do this).
    Thank you.

    In the "Arrangement" pane of "Displays" System Preference, drag the picture of the menu bar to the picture of the other display.

Maybe you are looking for

  • When I open safari, I get a blank page and the beach ball.

    When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes-the .com of www.facebook.com for instance-but other times, nothing at all. I've fixed this once before by deleting so

  • Elements organizer 13 import iphoto problem

    I've tried 3 times to import my photos into Elements Organizer and it keeps getting stuck and locking up in the same place.  Is it because I'm trying to import too many files?  Movies?  Its very frustrating.  Any suggestions?

  • IPhoto "unexpectedly quits" on launch

    I am using the latest OS X Lion with the new iPhoto 9.2.2 I think since the latest update, but certainly in the past week, everytime I try to launch iPhoto I get a message: iPhoto quit unexpectedly. I have tried several things based on what I read on

  • Technical complete WO error FM (

    Dear Expert, i dont know wether this issue should i put in here or n fincncial one, integration within PM and FM. i got error message (termintation), when do a technial completion of WO. The error message is: system error: funds management update (PE

  • Duplicate songs in iTunes but duplicate has a 2 after the title

    I recently transsfered my music from an old mac to my new iMac.  When I look at certain albums there are duplicate songs but the differnce is there s a 2 after the second song.  When i view duplicates they do not show because of the 2.  I have Rinse