Boot Drive Partition for OS

First time builder question here. I've noticed in the off the shelf systems I've purchased in the past, they come with the primary hard drive partitioned into something like C: and D:. D: is theFactory Image and C: is everything else. In my build, should I be planning to partition the boot drive for any reason? I am planning just to have the boot drive for the OS and Program files all as C:. But please save me from myself if this creates any problems.
Thanks

Now, if you know what you are doing and WHY there is one reason to partition a boot drive
I have an old Pinnacle Dv500 that digitizes analog input from a VHS player... and which won't work with Win7
So... I have a small WinXP partition on my boot drive to ONLY run Premiere 6x and the Dv500... and everything else is Win7
But that is not a case of trying to create a new drive letter for Win7 to use for anything... that partition is not used at all by Win7
http://forums.adobe.com/thread/652694?tstart=0

Similar Messages

Disk Utility stuck on "updating boot support partitions for the volume as required"

Tonight when I mounted my Time Machine drive (a WD My Passport drive), it failed to mount properly, and I received a warning from Drive Genius that it needed repair. But when I launched Drive Genius, the disk would not show up.
Through a series of mounts, unmounts, and sleeping the computer, I managed to get it to show up in Disk Utility, so I seleted "Time Machine Backups" under the main listing for the drive ("319.37GB WD My Passort..."), and clicked Repair.
The detail window showed "Volume repair complete" almost immediately. But for almost four hours now, it's been stuck on "Updating boot support partitions for the volume as required."
Meanwhile, Activity Monitor has been showing fsku_hfs taking 30%-85% of the CPU the whole time.
Anyone have advice?

Apparently not:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
But when I ran Disk Utility again this morning, not on the Time Machine Backup, but up the hierarcy on the level labeled "319.37GB WD My Passort...," I got...
The volume Time Machine Backups appears to be OK.
And now the drive seem to be OK.
I think I'll still offload everything and reformat it.

Macbook not booting up so I resorted to Disk Utility...it has been stuck on "updating boot support partitions for the volume as required"

So my Macbook was not booting up so I resorted to using Disk Utility...it has been stuck on "updating boot support partitions for the volume as required" for over two days.
Has anyone else had to wait this long?
I have read that I should leave it until I get another message but I saw this reply on another site....
"Hi everybody, the message: “Updating boot support partitions for the volume as required.“ means: the Disk Utilities is telling you what it is doing: 'Disk Utilities': "(I'm) Updating boot support partitions for the volume as required (& I'm done with it)." So when you see this message, the DS (Disk Utilities) is done & you can close the application"...
Any advice/tips would be greatly appreciated!

Doesn't have to be another MacBook - any Mac with FireWire (400 or 800) will do. FW 400 to 800 adapters or adapter cables should be available from any computer store.
Instructions for FWTDM -
Disconnect all other FireWire devices from both computers before you use FireWire target disk mode. Do not connect any FireWire devices until after you have disconnected the two computers from each other or have stopped using target disk mode.
To use FireWire target disk mode
    1.    Make sure that the target computer is turned off.
    2.    If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
    3.    Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
    4.    Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
    5.    When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
    6.    Press the target computer's power button to turn it off.
    7.    Unplug the FireWire cable.
(extract from http://support.apple.com/kb/HT1661)

BOOT DRIVE ADVICE for MAC PRO. How Big and Partition Size

So new new Mac Pro (Quad) arrives this week.
I'm doing a drive just for BOOT and another drive (or drives) for data.
The big question is, what size drive should I buy for just BOOT/OS/APPLICATIONS and how much of it should I partition. I want to install everything on the boot drive to be on the outside area of the disc and ignore the inside.... So, do I get a 300GB drive and partition 100GB to use as the boot partition and ignore the rest?
Any advise would be helpful!
Thanks!

If you have Final Cut, X-Plane and such, you'll find even 150GB to be small. You want to have plenty of free space for burning DVD-DL, temp space for programs and files, and so that free space never gets too highly fragmented.
A 200GB partition on a 640GB drive seems to be a good choice and it will still maintain 80MB/sec. Still use the rest as an alternate for your data (put it on a sparse disk image).
10K Raptor 300GB (Amazon, $229) is a nice, fast boot drive if you really need it, though most 640GB drives are more than adequate for most people.
If you plan to install Windows, I'd dedicate a drive just for that purpose and not use your boot drive. Not sure if "BOOT" meant just OS/Apps or more.

Scanning windows boot camp partition for viruses from mac system

is there any way that i can scan my boot camp partition (windows hard drive)from my mac operating system since i think this will remove more viruses and leave less chance for them to reappear.
thanks

I would first buy or find the best malware/spyware AV software and firewall.
An ounce of prevention costs less than the pound of cure.
Backup Windows image with WinClone or something.
ClamXav or Intego AV 5 are two ideas mentioned earlier.
If you use the web and email you need to install some programs, free or commercial.
http://www.makeuseof.com/tag/best-programs-to-keep-your-computer-secure/
My hat goes to Norton 2009 or their Windows 7 beta of Norton 360 v3 after using Kaspersky and AVG Suites.

How to adjust Boot Camp partition for more Mac space?

Hello,
TLDR Version:
When I setup Boot Camp, I intended to stay in Windows. I’ve now migrated to Mac and want more disc space allocated to it. How can I adjust this in Boot Camp without deleting and reinstalling Windows?
Extended Version:
I have had a 21.5” iMac for right at a year now, and have been running Windows 95% of the time prior to last week. I decided that I was spending more time on the Mac partition and deciding that it was better in my eyes than Windows, and decided to install all of my productivity software (Microsoft Office/Adobe Creative Suite) on it in an effort to wean myself off of Windows.
Unfortunately, when I set the computer up, I did a 90/10 partition install of Windows on Boot Camp, with 90% of the disc space being allocated to Windows. Obviously, this will no longer work for me, and working from my files in the Boot Camp partition is both limited, and irritating. I would like to adjust the partition the other way; probably an 85/15 partition with the 85% being Mac OSX and the remainder being Windows. Because Mac OSX is the boot disc, it appears as though it can be made smaller, but not larger in Boot Camp.
1. Is there a way to adjust the partition size without having to delete the Windows partition and reinstall?
2. Is the Airport Time Capsule a suitable device to temporarily dump my data on while I adjust the partition? I’ve got 99% of my data on a separate external HDD from a data backup a month ago, but would rather not have to make another backup.
I appreciate any information.
Best regards,
Ryan

Ryan M Smith wrote:
1. Is there a way to adjust the partition size without having to delete the Windows partition and reinstall?
You may want to look at Winclone or Camptune. There is Gparted/Live CD for the adventurous souls.
2. Is the Airport Time Capsule a suitable device to temporarily dump my data on while I adjust the partition? I’ve got 99% of my data on a separate external HDD from a data backup a month ago, but would rather not have to make another backup.
Time Machine cannot backup Windows. It will only back up OS - Mac Basics: Time Machine backs up your Mac - Apple Support.

Can CS6 be installed on a non-boot drive partition?

I'm going to run CS6 and Avid MC6 on the same machine (iMac), and thought it would be a good idea to put them on separate partitions to avoid any conflicts. Avid apparently MUST be on the system (boot) partition... can CS6 be installed on a non-boot internal drive partition?

It can, but shared components will still end up in your Application Support and Library folder, so this is a moot point. you are trying to avoid something that you can't influence.
Mylenium

Can VirtualBox use a Boot Camp partition for a virtual machine?

Can Sun VirtualBox be pointed at a Boot Camp partition to use it as a virtual machine, much like VMWare Fusion can?
-John

http://en.wikipedia.org/wiki/Virtualbox
http://blogs.sun.com/fatbloke/entry/windows7_onvirtualbox
Check the FAQ
http://www.virtualbox.org/

External Hard drive partitioning for Windows

Hi I have a MacBook Pro and I am trying to download Windows via a Seagate 1 TB external Hard Drive. I have already used this external hard drive for backups and have it partitioned as an MSDOS with 500 GB and OSEJ also with 500 GB. When I use Boot Camp Assistant to install Windows 8 it says I need a single drive as FAT partition. How do I keep the memory on my OSEJ while still installing Windows 8. Thank you!
John

I don't know what OSEF is, but as far as Boot Camp is concerned only two partitions may exist - the original OS X partition and the Windows partition made by Boot Camp.
I don't know what you are downloading to the external drive. If it is the Windows drivers for Windows on Boot Camp then those you can put on an external drive. But the driver disk can only be used after Windows has been installed and running.

I have a 500 gb hard drive partitioned for files and time machine but when i connect it to my mac only the time machine one shows up

well as the title says i have a 500gb hard drive with 2 partitions one with time machine and one for files it worked perefectly until yesterday only the time machine partition appeared in finder, i checked disk utility and both partitions appeared but the one for files appeared in grey and when i press mount an error comes up.

The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
http://web.me.com/pondini/Time_Machine/12.html
Once you look through this, I think you may agree that this type of surgery is not for the faint of heart. I would suggest that you consider this only if one of the other options just cannot work for you.

External hard drive partition for Time Machine wont mount

I have an external HD that I've partitioned half for Time Machine, and half for external storage. Today the Time Machine partition wouldn't show up on the desktop. I checked Disk Utility and it recognizes both partitions, but the Time Machine partition is greyed out. When I selected it, in the stat list at the bottom it said "Mount Point: Not Mounted." I then clicked on "Mount" at the top, and after a bit a popup told me it couldn't mount and I should attempt to repar the disk. So I clicked "Repair Disk," and after a while, I finally got the message "Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
Why is only one partition affected? Can I reformat one petition but leave the other untouched? Are there any other options before I do this?
One other item that is probably related: I've been having an issue with a flash drive that seems to constantly unmount itself, giving me "error, disk ejected improperly" messages. Earlier today I believe I had the same thing with my external HD.

Why is only one partition affected?
The drive malfunction that caused the problem only affected that partition.
Can I reformat one petition but leave the other untouched?
Yes.
Are there any other options before I do this?
This is not an option, it's mandatory: start a new backup on another drive. The one you have has lost data once already. If it were mine, it would be in the recycling bin now. You need more than one backup to be safe anyway. Apparently you have no backups at all of the data on the other partition. That means you're going to lose that data, sooner or later.

Hard drive partitioning for photographers 101

I have a Mac pro with the 250 Gb HD that it came with and I just bought another apple 500 Gb HD because the first was getting full. I also have an external LaCie 250. I don't know anything about partitioning, scratch disk mumbo jumbo. I am a photographer who uses Aperture and Photoshop CS3 daily. I have 4Gb of RAM and a dual 2.66hz processor.
In your experience what is a good way for me to partition/format these HDs so that these two applications run their best and have room for a huge Aperture library? Please keep it simple because all the forums I looked at were beyond my head.

Throw 3-4 500GB or even 750GB drives in and don't partition anything.
One for scratch, one for data, one for system, and your current drive gets cloned to a new drive (that makes it your backup).
MacGurus has a guide to Photoshop, partitioning, and storage.
http://www.macgurus.com
Look for the forum "Graphic Studio" and the Photoshop "sticky." there is a well-written pdf manual or guide with all the basics.
If you call it mumbo-jumbo (vs "it's all gReeK to me!") it sort of says you are sour on those that do and are forced to learn how our "cars" run and the type of gas it takes. I've always liked to know why the sky is blue, or how things work.
It depends on the size of your files, amount of work, number of layers, and the cost of performance.
There is an excellent blog by a photographer who also is a heavy "power user" Lloyd Chambers:
http://www.lloydchambers.com/
You might find it interesting and helpful.

External drive partitions for Time Machine

Questions:
     1. Do I need to have a two partitions on my external hard drive, one each for my iMac and another for my MBPro?
   2. Do I need to partition to use both Time Machine and SuperDuper or Carbon Copy Clone.?
   3. Which is better to use for backup if you need or want to retrieve a specific file?
Thanks for your help.
Vernon

1. No. Configure each machine's Time Machine preferences separately. Time Machine will take care of the rest.
2. Yes. You must clone to a freshly formatted drive or partition on a drive. I suggest you use two separate drives. One for Time Machine and the other for the clone. This way you have a good backup in case one fails.
3. I don't understand the question. Which "what" are you referring to? If you mean choosing between Time Machine and a clone, it's better to have one of each. The more backups the better.

My sound no longer works on Mac OS after installing a Boot Camp partition for Windows 7 x64.

I installed Windows 7 x64-Bit Professional Edition on my iMac Mid-2011 on Yosemite 10.10.2 through Boot Camp. I installed Windows 7 without any hitches and I proceeded to install an old PC game and I was able to run it just fine, I could here the audio perfectly. But, the next day, when I started my iMac on the Mac OS partition, the sound bar icon on the top right was greyed out. This problem began occurring after I restarted to the (original) Mac OS partition I've tried to check it out on System Preferences and Audio MIDI Setup. On Sys Prefs, it says, "No output devices found" and "No input devices found". On Audio MIDI Setup, it says,"No Devices Found on the System."When I go back to the Windows partition, I can hear audio just fine and I can even set the volume from my keyboard. I have already updated the necessary drivers on the Windows side. I've reset the PRAM and repaired the disk permissions with Disk Utility. Headphones don't work either but I can send audio through a bluetooth speaker that I have.

Hi 0day,
unfortunately you have to have the MacOS DVD to install the Boot Camp 3 (legally).
The 3.1 and 3.2 are upgrades to that (as you found out).

Boot Camp Partition too small

I created a boot camp partition for Windows 7 a few months ago, but I didn't make it big enough. Now I'm getting a "not enough space" message when I try to update to boot camp 3.2. I seem to remember that if I need to resize, I need to reinstall boot camp again - is that right, because I can't find where I read that?
I have a 2010 Macbook pro, 2.66 gHz, and my 32-bit windows partition was installed as 18 gb. I didn't think about having to run other software, like itunes, when I created the partition.
I've not been able to change the trackpad such that I can tap rather than click (VERY difficult for me to work with), and I was hoping boot camp 3.2 might fix that.
Any advice on all this would be gratefully received.

Thanks for the vote of confidence, Toocool4.
Hatter, I always search for solutions before I ask - I come to forums as a last resort when I'm not confident about proceeding without some advice. If you don't like the questions I ask, you don't have to get involved and answer. I didn't ask anything about doing backups - I backup my data regularly to an external drive. I asked what "backup system image" meant because I hadn't heard that expression before and I thought it might have been something critical I needed to know before I reinstalled my partition.
Before I moved over to Mac, I spent 9 years learning how to maintain my own pc, so I've got some idea of what I'm doing. But there are always things to learn, and I'm grateful to those who are willing to share their knowledge - I've used what I've learned to help those of my friends who are real novices, and at times I've even contributed to forums.
Since I only use my Windows partition for music, I think it'll be simple enough for me to just recreate. The 15-20 percent rule sounds like a good one, Toocool4, and I wish I'd thought of it before! This time I'll build a partition factoring in the size of software, like itunes, as well, and I'll make it big enough to cover everything!
If I've misunderstood the image-creating ideas, please set me straight; otherwise I'll assume just going thru the bootcamp instructions will serve me well again.
And BTW, I'm a GIRL, not a guy.

Boot Drive Partition for OS

Similar Messages

Maybe you are looking for