Boot erors

Hi,
Any idea what this errors are?
1. May 19 22:40:52 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 19 22:40:52 Leny kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
May 19 22:40:52 Leny kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May 19 22:40:52 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 19 22:40:52 Leny kernel: ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10001, max UDMA/100
May 19 22:40:52 Leny kernel: ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
May 19 22:40:52 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 19 22:40:52 Leny kernel: ata1.00: configured for UDMA/100
May 19 22:40:52 Leny kernel: scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
2. May 19 22:40:52 Leny kernel: \_SB_.PCI0:_OSC invalid UUID
May 19 22:40:52 Leny kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
May 19 22:40:52 Leny kernel: ACPI: Power Resource [FN00] (off)
May 19 22:40:52 Leny kernel: ACPI: Power Resource [FN01] (off)
May 19 22:40:52 Leny kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
May 19 22:40:52 Leny kernel: \_SB_.PCI0:_OSC invalid UUID
May 19 22:40:52 Leny kernel: _OSC request data:1 8 0
May 19 22:40:52 Leny kernel: PCI host bridge to bus 0000:00
May 19 22:40:52 Leny kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
May 19 22:40:52 Leny kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
May 19 22:40:52 Leny kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
May 19 22:40:52 Leny kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
May 19 22:40:52 Leny kernel: pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

Similar Messages

7970 boot eror

Hi,
I have CMS v 4.2
I just added a used 7970 phone to my system it was having a hard time registering to the manage. I did a system rest to factory that was mentioned in other posts. When it was reset it just sitts there and flashes the line buttons. I made and hooked up a console cable and was able to watch a boot cycle. the phone is haveing a problem with the the scco79xxxx.sbn file and says that the file is too large and abborts. does any one have a a fix for this problem
Thanks.

setup a different load either on the phone config page or in deviceDefaults.
i would lower the phone load if possible and if you get it working, then attempt to upgrade the phone load.
i've had this problem with 7970s where i had to downgrade the load, get the phone registered etc. and then upgrade to the load i wanted to run in our environment.

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

Windows no longer boots up, paging file error

I just reinstalled windows on my mac last week because until now I had been running the old beta version of boot camp.
Just a few days ago I started getting blue screens every so often and it happened again (twice to be exact) yesterday, however one of the times it booted up and informed me I might want to change my paging file size. Not quite sure what this was I went and found the paging file option in settings and found it was clicked on a set size...so I figured I'd set it on the option that lets windows decide for me hoping this would fix the blue screen problem.
I shut down my computer later that night and now windows won't get to the desktop.
When I start it up normally it runs the system check (which I cannot skip for some reason) which gets to 84% and then says \windows\Dump3865.tmp is cross-linked on allocation unit 1731772
Above it it mentions there is an invalid size for my page file.
I tried booting it up the in safe mode multiple times and every time it generates a list in dos and stops on windows\system32\Drivers\mup.sys
I really don't want to have to reload windows again. Is there anyway to skip the system check (it says press anykey, but that has never worked for me) or any other way to get my paging files back to the way they were?
Thank you.
Oh I'm running leopard with windows XP professional on a macbook pro (last years model) if that helps in anyway.
Message was edited by: Tommmmm

A. run chkdsk
B. What happens if you boot from XP CD and Repair System
C. system file checker - from command "sfc /scannow"
http://www.informationweek.com/news/windows/showArticle.jhtml?articleID=18530125 1
http://windowshelp.microsoft.com/Windows/en-US/Help/f768809f-ed90-415f-a83f-89b4 2108b3551033.mspx

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

I tried to install latest OS update. Recd error installing. IT tried to load the upgrade in Safe Mode. Now system will not boot up. IT says I have to do a clean install which loses all data.

After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...

Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend.

Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!

It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated space.
Step 2: You have to enter the machine Bios adn set the BIOS to Both and UEFI as first
Step 3: Connect your usb dvd
Step 4: Put your win 7 pro dvd in the usb dvd drive
Step 5: Reboot your machine and when it starts press F12 to get the boot menu and select the usb dvd drive then press enter
The machine restarts
Message on screen says press a key to boot from cd/dvd
Press space and it boots up the win 7 pro DVD
After files copy and load the setup screen asks to accept the agreement and where to install win 7
BE SURE TO SELECT THE 80GB location
Then follow thru the win 7 prompts to load it.
When the machine restarts you will see a dual boot screen with Windows 7 on top as first selection and Windows 8 below it as 2nd selection.
Make sure to hit enter with windows 7 selected
The win 7 installation completes.
You will see many items with drivers not installed dont fret.
You can load most of the drivers by highlighting the device in control panel/device manager and pick update driver then select BROWSE for DRIVER and be sure to put in drive D:\ which is now the windows 8 drive and hit search.
Many of the windows 8 drivers installed with no issue.
The Realtek driver was an exception .. goto to the lenovo site and pick the x100e tablet and download the LAN driver from there about (4MB). Copy it to flash drive and install it in win 7 from the .exe file. The driver for LAN will install sucessfully. The version of the driver is 7.46 something the 7.11 versions do not workl.
I have only 3 drivers that I could not find - 2 list as unknown and are related to ACPI or power management and 1 lists as USB controller but all the USB stuff works without it.
Be sure to either shutdown the system or sign out of win 8 when your done so you get the dual boot menu. If you shutdown while logged into win 8 the next time you start up it will go right to win 8 until you signout and restart.
Just to let you know an easy way to shutdown is go to the desktop and press ALT + FN + F4 and a shutdown menu comes up on the desktop.
Once win 7 pro is installed you can download the XP mode free from Microsoft and install it.
This is of course AFTER you have ACTIVATED WINDOWS 7 ONLINE with YOUR ACTIVATION KEY(you supply).
ENJOY! This is the BEST machine I ever had!

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

When I boot up it hangs on the login screen for awhile, why?

I have a mid 2011 Macbook Air 13". It came with Lion but I recently updated to Mountain Lion. When I wake the laptop from sleep everything is fine. If it's been awhile since it slept (a couple of hours), the login screen hangs. What happens is that it boots like normal and looks like everything is correct, but it won't let me type in my password. After 10 seconds or so I can see a cursor come up but it won't let me type (but anything I do type at this point will later fill in the field after another 2-3 seconds or so). One other thing that's weird is that when the screen first comes up it shows the battery percentage from when I put it back on the charger, then after everything catches up, it changes to show 100%.
I hope I explained the problem well enough. Basicly a "wake from sleep" is fine if it hasn't been long since the laptop slept, but if it's been awhile it takes about 15-20 seconds to boot up.
Ideas?

Here are some suggestions based on my recent issue with unable to get Mavericks up after upgrade - The Apple geniuses just simply couldnt figure this one out...despite it being in their shop for 3 days (They probably did not look at it...and asked if they can just wipe out everything and install fresh...i had said NO):
Restart computer and hold Cmd+V when you hear chime. This will start the computer in Verbose mode.
See the messages and see where the system boot fails. In my case, it was some backtrace IOStorageFamily issue with com.paragon-software.
Google may be able to solve your Apple issues - just type the error message in and see if you get any useful suggestions. in most cases - this would be some faulty 3rd party drivers.....
In my case, it was something stupid i had probably installed....I had to boot to safe mode (Hold Shift at boot chime) - open Terminal, delete the folder com.paragon-software.kext from System/Library/Extensions....that fixed the problem. Mavericks is working great now....
Let me know if your debugging thing works...

Apple Mini-DVI to VGA Adapter Problems in Boot Camp / Windows

I currently run Windows XP SP2 on my MacBook and recently purchased the Mini-DVI to VGA adapter so I could hook up the MacBook to an external projector, monitor, or TV to display what's on my Windows screen on the external device. However, when I connect it to any external device, it just goes nuts and sporadically continues to make the hardware connect and hardware disconnect sounds and doesn't allow for external output of the screen. Any suggestions...? Thanks!
Marc

I think I solved this problem.
It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
1. Start > Control Panel > Appearance and Themes
2. Display
3. Go to tab "settings"
4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
Have a nice day!
Message was edited by: BlakeTron
Message was edited by: BlakeTron

DVI To Video Adapter on XP using Boot Camp

I bought a DVI To Video Adapter for my MacBook pro. Though is works fine on the Mac OsX, when I tried to use it on Windows XP (using Boot Camp) all I got was a black-flickering image on my TV. Anyone… anything…? Thanx
MacBook Pro Mac OS X (10.4.6)
MacBook Pro Mac OS X (10.4.6)

I'm having the same problem.
It's gotta be some driver problem on the XP side.
I don't know if it's something created by boot camp when it creates drivers for the Mac.
The help i've found for the ATI Mobility Radeon X1600 doesn't describe the options and dialogs I'm working with very accurately.
Called Apple-- they can't support the issue. Turned me back to searching on my own. Boot Camp message boards/ ATI... bummer.
Someone needs to "Hero" us out.

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

Boot image does not exist and cannot read disk label errors.

Hi - I'm having a problem with installing Solaris 9 4/04 on a Netra T1. The Netra already has Solaris 7. I need to get this set up as a jumpstart server but it can't find the boot image. I'm using a brand new bonafide installation disk - not a copy. The system won't let me install/upgrade to Solaris 9 either. I get an error stating that disk label can't be read. I've tried swapping out the CDROM but I still get the same errors. Does anyone know what or why this may be happening? (Oh - and another strange thing - like I said the CDs are the original but there doesn't appear to be a cdrom/cdrom0/s0 directory. The directory I see is cdrom/cdrom0/sol_9_404_sparc/Solaris_9/Tools)
ERROR: Install boot image /cdrom/sol_9_404_sparc/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
and
Excuting last command: boot cdrom [- nowin]
Boot device: /pci@1f,0/pc1@1/ide/cdrom@2:f file and args: [- nowin]
Can't read disk label.
Can't open disk label package
Evaulating: boot cdrom [- nowin]@1/ide@e/cdrom@2:f File and args: [- nowin]
Can't open boot device
I appreciate any help at all - is there anyone out there who can tell me what I may be doing wrong?
Thanks

Hi check that you are booting of the right cd. Make sure it is soalris 9 software 1/2 if that fails then it may well be that your cd is buggered. most likely it is buggered it it cant find the boot image.

TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
   Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio Ramos

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

I have an itunes library on an external drive I want to use on a dool boot computer. How do I set this up without duplication of files

Ok, here goes with the explanation. I am running a Mac Mini mid 2010 with mt iTunes library on an external USB drive. I dual boot the computer into Windows 7. I want to be able to use the same iTunes library in both Operating Systems. I am trying to set this up on the Windows side without accidentily erasing, moving or duplicating any files. In the past when I have tried I have ended up with multiple files. I have an iCloud also but do not want to download any files again. How can I get iTunes on Windows to simply recognise my existing storage and create a library list from what is already there rather than duplicating files?
Update: As soon as I signed in with my iTunes account iCloud picked up my playlist and now lists all my music. Right clicking on the songs give me the choice to download the files, but the files already exist oin my external USB. I simply want iTunes on Windows 7 to point to the existing files.

How is the external drive formatted?
Allan

Boot erors

Similar Messages

Maybe you are looking for