Boot Error: Intel (r) AT Supported system lock due to: platform attack detected: user password

I have HP ENVY Model 4-1110ET.showing Intel (r) AT Supported system lock due to: platform attack detected. Time left...... Please select one of the following for platform recoery: 1 - User Password 2 - Server Token Password. I forgot my password please help me I am unable to boot my Laptop.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that your system is locked due to the anti-theft protection. Please see the following to get the help you need. Telephone Support for the Intel® Anti-Theft Service Provided by McAfee

Similar Messages

Satellite A100 is locked due to the fingerprint BIOS & user password

Hi all
I've got my A100 at my job, with TouchChip fingerprint recognition a year ago. On the initial installation I have recorded my fingerprint from the windows interface.
Six months ago, I had to reinstall windows XP because of a non repairable virus infection. I've installed WXP and downloaded all the drivers and additional software from Toshibas site.
I have NOT recorded again my fingerprint, and I have NOT enabled the TouchChip software this time. My entire problem was only an annoying message at logon time that said "You haven't recorded your fingerprint yet . . ." and that was all.
After a 2 week trip out of town ( My A100 was locked in my desk, powered OFF-no connection to mains) at the first boot, TouchChip software came back from the grave ! ! !
"TouchChip Bios Extension" screen appeared after power on, and my finger is required to load in WXP ! ! !
At WXP user logon dialogue the additional message "You haven't recorded your fingerprint yet . . . is still here, but I can NOT boot the machine at all, without my fingerprint. After some digging in PowerProtector suite (?) I found an option that said "Enable or Disable the use of fingerprint for BIOS System and User passwords" or something like that.
I disable this, and the machine asks for reboot. This was the last time I saw the desktop.
After the boot the system asks for password. BUT I HAVE NOT SET ANY SYSTEM OR USER PASSWORD!
Is this possible?
I've done something wrong?
What's the solution?
I'm locked out; I don't know why and how the BIOS is locked with a password (so I can't unlock it).
Please somebody help.
Regards, Georgios

I don't know what exactly A100 notebook you have but it looks like the notebook was delivered with the preinstalled Vista OS.
You have installed XP and the single XP drivers from the Toshiba page.
But from my understanding the BIOS must be updated too! The Satellite A100 series supports an special XP BIOS version. If the BIOS was not updated then the notebook could run not correctly.
I don't know if this could have a bad influence on the fingerprint but nothing is impossible!
However, fact is that BIOS asks for the password. If you don't know this you will have to delete it on other way...and this can be done only by an authorized service provider in your country.
Ask the technicians for the help and explain the whole story! Maybe they will remove the password for free!
Bye and good luck

System lock due to pla

I hope u doing fine
I had before issue in fan then I clean it , it is working fine after that I receive massage (system lock due to : platform Attack Detected ) then ask for platform recovery
Kindly your support

Hello, @ahama
Welcome to the HP Forums.
It appears that your notebook has locked up. I will try to assist you with this.
The message "platform Attack Detected", when I look this up seems to be generated from Intel anti-theft.
Here is a document on it: HP Notebook PCs - Intel® Anti-Theft Technology for your Notebook.
It seems this was triggered in your notebook. If you do not know the password, or cannot get a code. Then you may want to give the 1-800 number a call that is in the document.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

BCD/boot error 0xc0000001 ~ stuck on broken windows partition

Okay so I have a macbook pro 2009 and I recently partitioned my hard drive to get windows 7 premium using bootcamp. While installing new software for my windows side it it froze up and I had to do a hardshut down. After I restarted my computer it came up with a black screen that says boot/bcd error - 0xc0000001
info: an error occurred while attempting to read the boot configuration data.
It instructs me to
1. insert your windows installation disk and restart my computer
2. choose your language settings and then click "next"
3.click "repair your computer"
problems I've come across while attempting to fix this
1. when selecting what operating system to repair after starting up the windows installation disk there are no operating system that shows up.
2. "repair your computer" option does not work and cannot repair the problem.
3. cannot hold down option to go back to Mac side because of EFI lock which I don't know the password to it.
4. cannot get to safeboot for reasons unknown, but holding down f8 doesn't work and holding down FN with F8 also does not work. It just goes to the boot error screen.
5. System restore does't work either.
6. went into command prompt and typed sfc / scannow but it says that another scan is in progress but needs to reboot to start. Every time I restart the same message pops up.
All I really want to do is get back to my mac side so I can delete the partition at this point. But it is IMPOSSIBLE so if anybody knows any solutions please do share. thanks!

Hi electrovalent,
I agree with Tripredacus,we seem to miss the important part that we should boot from the UEFI mode for a GPT format disk.To boot from the UEFI mode:
1.Insert the installation DVD or USB flash drive, and boot the computer.
2.When the firmware starts to initialize, press the key that opens the UEFI firmware boot device menu, such as Esc, F2, F9, F12.
3.Select an EFI drive, examples: EFI DVD/CD Drive, EFI USB Drive, or EFI Network Drive. You may be immediately prompted to press a key to boot from the drive to continue.
Here is a link for reference :
Walkthrough: Boot Windows PE from a UEFI-based Hard Disk
https://technet.microsoft.com/en-us/library/hh265131(v=ws.10).aspx
I have noticed you have tried the "Startup Repair"option before but I would suggest you try this option again .Because we have chosen the UEFI mode this time and this option is usually useful and convenient to repair the boot loader.
If the issue persists ,try the following command line .I also noticed you have tried the similar command line before but I have made a little modifications according to the screenshots you have posted.
diskpart
list vol
sel vol 2 (Volume 2 is the fat32 volume,this step is not included in the screenshot )
assign letter=v
exit
ren BCD BCD.old (Backup bcd )
bcdboot c:\Windows /s v:
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

System locks into password cycle

When accessing App Store the selection of an App( free or not) triggers question for password. Despite entering the correct password each time the system locks into a cycle of asking for password but not progressing anything. This problem first occurred when it requested additional questions in support of better security. It no occurs for any App Store action.
Fixes tried
Changed account details including new passwords
System setting reset all
System restore
System reset all
Works fine when I log into IPad using my other Apple/ITunes ID

Problem has gone away after resetting apple ID using a web browser on a PC. The online apple account repeated exercise for security questions online and then again on IPad but this time it all worked as normal.
Thanks

I have never set a firmware password on my macbook pro, but when I hold down option to boot from a different drive, I get a lock, and have no idea what the password is..?

I have never set a firmware password on mymacbook pro, but when I hold down option to boot from a different drive, I geta lock, and have no idea what the password is, i am the first owner of my mac so its impossible that someone else has set the password, i have only noticed this becuae i made a bootcamp partition and installed windows onto the machine, after the installation... i shut down the comptuer and continued to use os x, days later i tried to boot into the boot camp partition again by holding down the option key on boot, but i got a window asking me for a firmware password that i have no idea of! please help me!
will

Hi macbookprowilliam, I have the SAME problem, that grey lock just appeared trolling me. I dunno the password and I wan't to sell this macbook! I need the password. Maybe it's a new malware! I don't even know how to set a firmware password and I am the only user on this computer too! I have a thread about that too: https://discussions.apple.com/thread/3926399?start=0&tstart=0
So, did you fix it or got around it? Please reply! I am desperate.
Thank you

ERROR: attribute verification of /etc/.java/.systemPrefs/.system.lock fai

Dear all experts, i am trying hard to solve this problem on solaris 10.
i downloaded java package i.e jdk-6u18-solaris-i586.tar.Z and extract it using zcat jdk-6u18-solaris-i586.tar.Z | tar -xf - . it extracted successfully following folders.
SUNWj6cfg
SUNWj6dev
SUNWj6dmo
SUNWj6jmp
SUNWj6man
SUNWj6rt
plus few others
i tried to install all of the above using command pkgadd -d . SUNWj6rt SUNWj6dev SUNWj6cfg SUNWj6man SUNWj6dmo.
all of the package succesfully installed except one i.e SUNWj6cfg
i got following error message
[Do you want to continue with the installation of <SUNWj6cfg> [y,n,?] y
Installing JDK 6.0 Host Config. (1.6.0_18) as <SUNWj6cfg>
## Installing part 1 of 1.
[ verifying class <none> ]
cp: /etc/.java/.systemPrefs/.system.lock not found
cp: /etc/.java/.systemPrefs/.systemRootModFile not found
[ verifying class <preserve> ]
ERROR: attribute verification of </etc/.java/.systemPrefs/.system.lock> failed
pathname does not exist
ERROR: attribute verification of </etc/.java/.systemPrefs/.systemRootModFile> fa
iled
pathname does not exist
## Executing postinstall script.
Installation of <SUNWj6cfg> partially failed.]
i am trying hard to find out what is the problem.
thanks in advance
Mr parkar
UAE

These are innocuous errors that you may safely ignore. However the disk error is a problem. Do the following:
Repairing the Hard Drive
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Error while creating a support message in satellite system

Hi,
I am facing an error while sending a support message to solman form the satellite system
(( Error Description : Error in Local Message System: Error when opening
an RFC connection Message was Not Created ))
1) I gone through various threads and set the required authorizations like
SAP_SUPPDESK_CREATE and
SAP_SV_FDB_NOTIF_BC_ADMIN ,
SAP_SUPPDESK_ADMIN
for the user in the solman .
2) I checked the RFC connection and it is working fine.
Anyone pls help me to resolve this issue

hi rohit,
thanks for u r immmediate response
do i have to assign the roles to the user in the satellite system or the solman.
some roles in those 4 roles are not in the satellite system.
thanks
Rahul

System Lock Error while reset & reversing the cleared document - FBRA

Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
Manish

Hi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards

My ipod photo keeps getting an error message to contact support. won't hold a charge and locks up.

I pod photo locks up, keeps getting error message to contact support. and won't hold a charge.

TR16 wrote:
Called service provider, took to a cell phone repair shop, out of warranty and want to fix this **bleep** pearl 8130 by myself so i don't have to purchase another one (not sure i ever will after the last 3 hours of trying to fix it myself.
White screen when connected to a charge. At times it has a battery with a flash through it and at times an error code comes up. it does not hold a charge for long.
i've downloaded the newest software updat (i think)
i've tried the application loader in desktop manager.
taken the battery out and back in.
Does anyone have any suggestions for me before i throw the phone out my window????
What happened when you tried putting different battery in it? Did you ask to borrow one to test from the carrier?
Or did you purchase a new battery and try it?
Do you have the right battery for this series phone and is it an OEM Blackberry battery?
See the picture below to make sure you have the right battery (note label color)
Let us know.
Thanks,
Bifocals
OEM BlackBerry C-M2
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we did

having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha

System Locking Error - WebAS 6.40 ABAP

My Netweaver 6.40 ABAP edition is now up and running. License is installed. I had to resolve an index-problem in the database layer by recreating a corrupt index via DBMCLI, but now the database seems to be fine.
But I still can't "lock" anything. When I e.g. try to change client settings in SCC4, I get an error message:
"System error: Unable to lock table/view T000".
When I try to activate a service in SICF, I get "System locking error" (SR053). It seems that the enqueue server doesn't work.
SM12 (Lock entries) diagnostics say: "System error during lock operation. Execute diagnostics in SM12" (03113). Interesting message, but not much help as I just did execute the diagnostics in SM12.
The current workprocess configuration is:
rdisp/wp_no_dia=2
rdisp/wp_no_btc=1
rdisp/wp_no_vb=0
rdisp/wp_no_vb2=0
rdisp/wp_no_enq=0
rdisp/wp_no_spo=0
Which is the default. I also tried
rdisp/wp_no_dia=2
rdisp/wp_no_btc=0
rdisp/wp_no_vb=0
rdisp/wp_no_vb2=0
rdisp/wp_no_enq=1
rdisp/wp_no_spo=0
but that did not help.
My hostname is NLVEHVHSE1NB272 (15 characters!). 6.10 could not be installed on a computer with such a long name, but 6.40 can.
My rdisp/enqname is "NLVEHVHSE1NB272_NSP_", where I would expect "NLVEHVHSE1NB272_NSP_00".
Does anybody know what the reason for my locking problems could be ? Thanks !

Hi Ralf
I had an identical problem and have been able to solve it by shortening the host name to less than 13 characters.
OSS Notes 611361 and 23538 may he of help
Cheers
Grahame

Error in MB1B as System lock administration error

Hi Experts,
When I do posting in MB1B I found the error as below for some materials,
System lock administration error. Please notify your admistrator
We have checked with basis team as they said there were no lock entries for the specific users.
Can anybody guide me how to overcome this problem? Please respond ASAP.
Cheers,Kumars///

HI Jurgen,
Thnks for your prompt reply...now i ask my user to to posting once again in MB1B now he is telling that he can able to post sucesfully.Also he tells me that when he do confirmation in CO11 transaction now the same problem is appearing.He refered us the COGI tansaction as well.
Also we have noticed the same problem in MIGO as well.
Now please tell me how can i go ahead with fixing this issue.
Cheers,Kumar.S///

System Lock error : Inform System administrator

Dear all,
One of the SAP user got this (System Lock error : Inform System administrator) error , while doing posting .
Kindly advise

Hi,
Check for any lock entries in the TA SM12 and then have a look at the note 13907 System error in the block handler, overflow lock table.
Hope this helps.
_Varadhu...

System Lock error:Inform your system administrator

dears,
i receive this error message (System Lock error:Inform your system administrator) while doing Sales order or , & MIGO. can you please help out

Hi,
This is not an Unicode issue, but anyway check this note:
13907 - System error in the block handler, overflow lock table.
Marco

Boot Error: Intel (r) AT Supported system lock due to: platform attack detected: user password

Similar Messages

Maybe you are looking for