Boot error message on new install of Paravirtualized arch

Hello,
I just finished installing a PV arch guest on xen.
I get the following error at boot:
[1.185226]  i8042: No controller found
[1.1247134] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Google told me this is the driver for the hardware clock so I tried the following:
[root@coronelaurelianobuendia ~]# hwclock --systohc --utc
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --debug option to see the details of our search for an access method.
[root@coronelaurelianobuendia ~]# hwclock --debug
hwclock from util-linux 2.24
hwclock: cannot open /dev/rtc: No such file or directory
No usable clock interface found.
hwclock: Cannot access the Hardware Clock via any known method.
Does anyone have any ideas? Is this a problem with my grub.cfg? A problem with PV arch? or a problem with my kernel?
Thanks for your help and advice

Hi ,  I see you have been troubleshooting an issue with your new LaserJet Pro MFP M127, and I may have found some items you can check.
This issue is usually caused by some sort of packing materials that may be hiding on you. I would double check Setting Up the Printer Hardware for HP LaserJet Pro MFP M127fw to make sure it's not a piece of cardboard inside the printer. The next thing that may cause this would be if you forgot to remove the orange tabs on the toner cartridge. If you take a look at Replacing the Toner Cartridge, it shows what needs to be removed from the toner before installing it inside the printer. There is a whole setup video about Unboxing and Setup of the LaserJet Pro MFP M127 you can watch as well. If the issue persists, you might still have options covered under the HP LaserJet Print Cartridges and Imaging Drums Limited Warranty Statement - I would still try to Contact HP Support to see if there is anything they can do. Fill in the model number and the form to receive a case number for expedited assistance.  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

Similar Messages

  • 2 error messages - failed to install extention 2.1 and output module 2.1

    I just tried to update my Encore CS4 from the Master Suite. I have two error messages " failed to install extention Mgr. CS4 2.1 and failed to install output module update 2.1
    Encore will load a new project and save but I can't do anything else like add files before it crashes.  Any help please. - Art

    This might not apply with En CS4, but there were some issues on install, and on updates in Photoshop. It seems that MS had a bum MSI (Installer) version, and it caused a lot of PS installs and updates to fail. Do not recall any specific error messages. The cure there was to download and install the revised MSI module from the MS site. I would imagine that any MSI module would be heavily Windows version-specific. Take that as a warning to check any very carefully, before downloading and installing. MS is pretty good at having a ReadMe with installation instructions for each such download. It almost always contains the exact versions of Windows, that the file is for. Please read any installation instructions carefully.
    This might be worth a look. I do not have a link to the exact page, but a search of the MS site should yield something. I'd search for "MSI," to start.
    I just do not recall any issues with En and either installation (on proper systems with updated OS's) or with any updates.
    Good luck, and please report your success.
    Hunt

  • Just got an ipod touch software version 2.2.1 and everytime I download an app get error message requires newer version of software.  Did all updates, and same.

    Keep getting error message require newer version of iPod software to install apps on ipod touch v2.2.1.  Is there a version limitation for using apps with the iPod touch?  Loaded the latest updates etc.

    I sounds like yu have a first generation (1G) iPod.  You can update that as far as iOS 3.1.3.  To get that update go here. You may have to use a different browser to get the sublink to work correctly.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    Identify your iPod here:
    Identifying iPod models

  • Why am I getting an error message when I install?

    I'm trying to download the free Photoshop CS2 into my new Mac Book Pro and I'm getting an error message during the install process.  Acrobat Profession downloaded fine.  *I found the two programs here:
    http://www.adobe.com/downloads/cs2_downloads/index.html
    Suggestions?
    Andrea

    Read the info on the page. It's not compatible.
    Mylenium

  • I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance   " Help pleas

    I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
    I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
    Does anyone have any suggestions, please ?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Error message saying "new itunes library"

    downloaded the latest itunes now when i try to open itunes just get error message saying "new itunes library"

    Try this approach:
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    If that doesn't work go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
    tt2

  • CC error message - Can't install to root  -wanting to place cc aps on internal SSD

    CC error message - Can't install to root  -wanting to place cc aps on internal SSD. (I know that LR5 has to go on the Mac OS disk...)
    but what about the rest of the aps?

    Johnmhannam have you adjusted the installation location within the Creative Cloud Desktop application?  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Error  message 16 after install

    I have error message 16 after installing Photoshop CC and LR 5. I've tried uninstalling and re-installing. I have a MacPro running Mavericks. Any ideas?

    well, it was worth a try...Any other suggestions?  It still isn't working.

  • HT1451 When I try to open i tunes i get an error message saying 'new i tunes library'. I then can't open it

    When I try to open i tunes it brings up an error message saying 'new itunes library'. It does not open then. Can anyone help?

    I have windows 7.  I went into control panel, then select programs, then select programs & features.  Highlight 'iTunes' from the list.  Then select 'repair'.  The program will then reconfigure iTunes.  Once complete I restarted the computer and everything was ok.

  • HT4623 Getting the error message "Unable to Install Update" when trying to install IOS update

    Getting the error message "Unable to Install Update" when trying to install IOS update

    Restore teh device.

  • When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation."  But it gives me no more information as to what I can do.  Help please?

    When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation."  But it gives me no more information as to what I can do.  Help please?

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • Getting error message on ungrade install from itunes 10 to itunes 11

    getting error message on ungrade install from itunes 10 to itunes 11

    What does the error message say? (Precise text, please.)

  • My MacBook Pro, 1.83 GHz Intel Core Duo gives me an error message during Lion install. My Intel Duo Core is not an Intel Duo Core and cannot install Lion.  I already have Snow Leopard what is the problem with Lion?

    My MacBook Pro, 1.83 GHz Intel Core Duo gives me an error message during Lion install. My Intel Duo Core is not an Intel Duo Core and cannot install Lion.  I already have Snow Leopard what is the problem with Lion?

    You need a "Core 2 Duo" for lion, and I'm guessing you only have a "Core Duo"  My wife's macbook is also a "Core Duo" and has Snow Leapord, but cannot install Lion.....

  • Am trying to install the mas os yosemite and its giving me an error message that "The Install OS X Yosemite application can't be used from this disk". What is the problem?

    Am trying to install the mac os yosemite and its giving me an error message that "The Install OS X Yosemite application can't be used from this disk". What is the problem?

    Impossible to answer with information provided

  • Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions.

    Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions. I need help.

    If you haved tried all the fixes and suggestions, there is not much to add. Just in case: did you really try using this tool http://labs.adobe.com/downloads/acrobatcleaner.html to first eliminate all traces of Reader, and then use the full offline installer from http://get.adobe.com/reader/enterprise/?

Maybe you are looking for

  • Insert into oracle_table (column1) - select column1 from mysql_table

    Hi all, How do I select data from mysql_table and insert it into oracle_table ? Is it possible at all?

  • Group Currency mismatch - FC Valuation Reversal

    Good Day! After running reversal for foreign currency valuation (new GL), we noticed that Group currency was not populated causing a small mismatch. We ran valuation again after reversal and the open item was still valuated properly. Do you have any

  • Report availabilty doesnt showup in the Cube

    Hi Gurus we have a cube and everyday full updates are loading to the cube thru process chains we have delete overlapping req step in the process chain for this cube.. its a basic cube and it doesnt have any aggregates... everyday around 20 requests l

  • Multiple instances of same view (Sun 1.2 JSF RI question)

    Does the 1.2 RI support distinct backing bean and/or component state for multiple instances of the same view? I've seen mention of a "window identifier" in the 1.2 spec and some RI patches (Issue 28 https://javaserverfaces.dev.java.net/issues/show_bu

  • Choosing JRE used by Plug-in in OBJECT OR EMBED tags

    I have successfully used the type attribute of the EMBED tag to choose the Plug-in version with fire fox and used the clsid of the OBJECT tag to choose the Plug-in version used by IE to run an applet. Is there a way in the OBJECT or EMBED tags to for