Boot failure: Digital signature not found

Just bought a Toshiba Satellite C885D-S5320 and it was working great. Packed it up this morning, unpacked it a few seconds later and tried to turn it on. Got a message that reads "Boot failure: a proper digital signature was not found. One of the files on the selected boot device was rejected by the Secure Boot feature."
I didn't make a recovery disk but tried to use the hidden recovery feature I'd found out here. Worked great to abou 76%, then that message came up again. Help???

Re: SATELLITE C855D-S5320 Help me please!
Options
‎05-09-2013 04:32 PM
I bought the same computer from Walmart for my daughter for Christmas. I have had to send it in three times to have the hard drive fixed as it showed the same error that you were getting. I was very mad as the first time I had to pay $25 to have them ship me the box to send it in to them. I also tried at first to return it back to Walmart but was told it was to late and I would have to go through Toshiba. I just received it back again today. They have had to replace the hard drive three times. This is ridiculous as I have had several other computers and laptops and have never had to have a hard drive replaced before. I told them I was not paying the last two times to send it in for repair as it should never of had to go to them the first time. The girl did send me the box free the last two times but honestly I think they should just give me a whole new computer as I think these ones are lemons! I cannot believe a brand new computer would need to have a hard drive replaced 3 times in 5 months! The girl advised me if it had to go back again they would probably finally do something. I sure hope your is working better then mine.

Similar Messages

Digital Signature not working in 12.1

Hi All,
Digital Signature not working in 12.1

Hi Subhanim,
Currently I am having MII 12.0 for 12.1 I have not tested
I have tested on 12.0 and it is working fine for me following are steps which i configured.
iCommand Applet setting:
Audit, Command Audit Role 1 and Command Audit Role 1 Login Required
HTML:
I have added iCommand applet with display template as iCommand which I created and one query template (write tag query)
JS:
in JS i am executing iCommand and checking success or failure of same.
you can checkout the role and sequerity tab of iCommand.
Please go through below thread may be usefull:
Digital signature issue in SAP-MII 12.1
Regards,
Manoj Bilthare
Edited by: Manoj Bilthare on Jun 13, 2011 3:53 PM

Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host

Hi,
I have created a ALV report in ABAP Webdynpro.
When i try to print the ALV Report it gives Communication failure : Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host.
I belive i need to install Usage Type BI Java.
Can someone help me with the same how to find the installation. I am unable to find what to install.
Thanks and Regards,
Nuzhat

Hi Sergio,
Thanks for the immediate reponse.
I have already gone thru the blog u have sent.
I am uable to do installation of Usage type BI-Java.
I need anyone's help for the same.
Thanks and Regards,
Nuzhat

Want insertion of Digital Signature not to require a save

I have an issue that I would appreciate someone's help on. I have been with Adobe Tech Support via their portal. Yet I have not been able to establish whether what I want to accomplish is doable.
What I have is a document that actually consists of several documents, which in aggregate comprises our application for persons wanting to drive for us. For the sake of this scenario please understand that the document is not to be broken up into multiple files. It is created as a single document to facilitate the management of the numerous applicants by in-house staff.
Anyway - this form has multiple digital signatures. The department head insists on this as each section of this document has information to be attested to as original and accurate. However, we find that only the first digital signature is used to certify the document, and any additional serve only in a "confirming" capacity.
So we have this document with multiple digital signatures, the first of which certifies the document and the remaining as "confirmation". And all of these digital signature fields are set as "required" in their properties. The form is developed and presented for testing. So we enter just one of the several digital signatures and attempt to save the file. What we expected to happen was the pop-up of a dialogue to point out that all of the required digital signature fields were not completed. But no such warning arises, and this circumstance "raises an eyebrow" or two within the firm, who expect this edit to appear.
Based on recommendations from Adobe support I go out to the developers site and research scripting. After several hours I come away with a script that will indeed spawn a message when any digital signature is missing. However, another problem arises. After closing out the dialogue box and inserting the first of several missing digital signatures I am immediately required to save the file. The save works and here we have the form with several digital signatures still not signed. This allows the user to forward on the form to us, at which time the file will be reviewed and returned to the user for further completion. And in the event that only one of several missing signatures is entered, and the file again saved and forwarded, this scenario has the potential of being repeated several times.
Is there any way through scripting for the insertion of the digital signature not to spawn a save of the document? Thanks!

Is there any isight as to how this is done?
I am currently opening a file from Teamcenter engineering, however if I try to save the file it complains there is another copy open elsewhere (which isn't true). I have to export the file first, save it and then check it back in. It seems to be the only area that behaves like this, as I am able to markup the document add pages,etc and save the document just fine.
If I could remove the save as function and just use "Save" I think that this would help.
Appreciate any/all replies!
Regards,
Sean.

Error Occurred: PDF header signature not found.

Receiving error on 2 different computers when trying to open pdf documents to print. One computer has Adobe Acrobat X and the other has Adobe Reader XL 11.0.05,
Following is the error:
Error Occurred: PDF header signature not found.
What is causing the error and what changes need to be made to allow the documents selected to be opened?
Thanks in advance,

What software is issuing the warning or error?
Is this form created in LiveCycle?
That is the Adobe product that creates an XML form.

Acrobat Standard 8 - why is the digital signature not responding?

Using Acrobat version 8 and it is fully updated.
When I try to insert a digital signature, it freezes and when I eventually close the digital signature window, it says it is not responding and the program shuts down.
This is using a document that I use frequently and only recently started having problems with the digital signature.
Why is this happening and how can I fix it?
Thank you!

Hi,
I'd like to clarify some points. You use a digital ID to create a digital signature, not unlike how you use a pen to create (what we refer to as) a wet ink signature. When it comes to applying a digital signature to a document, you can sign just about any blob of electronic data. You can sign your e-mail or a MS Word document as well as a PDF file. The signature itself lives either in the document (that's how Acrobat does it when signing a PDF file), or it can be an external attachment (that's what the smime.p7s file is you might see attached to some e-mail messages).
Here is where I'm a bit confused. How many digital IDs do you have access to? If you only have one, does it cause Acrobat to lock up when signing a specific PDF file or when you try to sign any PDF file? Same question if you have more than one digital ID available to sign with, they all cause Acrobat to lock you when signing just one specifc file or any file? When you try to sign, are you signing an existing signature field, or are you creating a signature on the fly, be it either visible or invisible? If it is just one file that is causing the problems then that file is probably corrupt. If it's any file then it is a more systemic problem and I don't have an off the shelf answer for you.
Steve

Getting error : End-of-central-directory signature not found.

HI,
while unzipping the patch we are getting the following error.
check the below error
bash-2.05$ unzip p4505133_10105_SOLARIS64.zip
Archive: p4505133_10105_SOLARIS64.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
***unzip: cannot find zipfile directory in one of p4505133_10105_SOLARIS64.zip or***
***p4505133_10105_SOLARIS64.zip.zip, and cannot find p4505133_10105_SOLARIS64.zip.ZIP, period.***

Kindly check if the zip file size both at the source and the destination are the same ...

End-of-central-directory signature not found

I am in the process of configuring Grid on a Linux server (OEL 5)
i have the software onn the server as a zip file and i downloaded it through ftp in binary mode.
I am not able to extract it,below si the error..
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]# unzip GridControl_10.2.0.4_LINUX.zip
Archive: GridControl_10.2.0.4_LINUX.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: GridControl_10.2.0.4_LINUX.zip may be a plain executable, not an archive
unzip: cannot find zipfile directory in one of GridControl_10.2.0.4_LINUX.zip or
GridControl_10.2.0.4_LINUX.zip.zip, and cannot find GridControl_10.2.0.4_LINUX.zip.ZIP, period.
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]# file GridControl_10.2.0.4_LINUX.zip
GridControl_10.2.0.4_LINUX.zip: Zip archive data, at least v1.0 to extract
[root@oemgridsvr Grid]#
[root@oemgridsvr Grid]#
Please help !!
~Thanks

I think this is multi-part archive file. Basically, you have to put these files in one big file and unzip that file..
E.g you must have at least 2 zip files with ext a and b.. EG. for AIX platform there are 2 zip files in the downld zip files.
Step 1: cat p4547817_10202_AIX64-5L.zip.a p4547817_10202_AIX64-5L.zip.b > p4547817_10202_AIX64-5L.zip
Step 2: Make sure the checksum is correct as per the file howto.txt.
$ > /usr/bin/cksum p4547817_10202_AIX64-5L.zip
should produce output 3252003388 1319974395 p4547817_10202_AIX64-5L.zip
Step 3: unzip p4547817_10202_AIX64-5L.zip

Digital Signature not allowed Acrobat 9.5.2

I created a form in Acrobat Pro and saved with extended functions. I'm using Acrobat Standard 9.5.2 which allows me to add digital signature. Most other employees can add signatures as well. However, there are a couple (using the same version software above) that when they open the file the security for digital signature is set to "Not Allowed". When I open the same document signatures are allowed. Therefore, is appears their software settings is setup differently than everyone elses. Can you help identify which setting needs to be changed?

Classification: For internal use only
I can't attach images at this point. The security method for both is No
Security. However, on the other user computer next to signature it states Not
Allowed. However, when they open the same form they see an error on top that
does not show up when I open the same form. The error message is, 'At least
one signature has problems. Please fill out the following form. You cannot
save data typed into this form. Please print your completed for if you would
like a copy for your records'. However, when I open the same for I do not get
that message. It almost seems like a security setting within their reader or
not.

Digital Signature Not Showing Up in Saved PDF

I am frequently sent pdf contracts that need to be filled out, signed and returned. I turn the pdf into a form and then add a signature field, click "certify with visible signature," sign it and save it as a pdf. But then when I email the signed pdf it has all the form content but doesn't show the signature. Same for when I open the file in Preview. The signature only shows up in Acrobat. Can anyone help explain what I am doing wrong?
Thanks in advance.

Hi,
It was dsaks who originally asking about creating a digital signature and that's what the core of this thread is about. When Mobius Strip asked about flattening the signature into a bitmap image that I suggested using a custom signature appearance, because the progenitor of the thread was asking about digital signatures. If they can get by with using a custom stamp then that's fine by me, but that wasn't the thread topic.
On to your questions:
mrtoner wrote:
I understand why Adobe won't (if that's the case) license the digital signatures ability so that Preview and other applications can use it. However, it should be trivial to allow that wet ink signature appear in other apps and I don't see a compelling reason to prevent it -- afer all, it's not a digital signature.
There is no licensing involved here. The PDF specification is public and the Acrobat SDK even has an example of how to create your own signature plug-in. When it comes to the actual cryptographic operations we license the software from RSA. As far as how the signature is created, and how it should be processed, that's all covered by public facing documentation. In fact, Apple is more than capable of processing signatures using their Keychain utility, it's just that they have elected not to include that functionality into Preview.
If your job is to monitor this forum and assist users, why couldn't you manage to suggest that the other users use the stamps feature, since it was clear that what they were wanting was only the signature image? These folks are spending hundreds and thousands of dollars on your products and they deserve better than this.
It's not my job to monitor the forum. I chime in on digital signature issues because it's a complex subject and there are so few people who understand the minutia of how they work. If dsaks hadn't added "certify with visible signature," to the original post I would have skip this completely, but he/she did so I tried to answer their question.
Finally, it's a bit disingenuous when you stated "The image does not display at all, except in Acrobat/Acrobat Reader". It just doesn't display in the free Mac Preview app. There are other third party signature handlers that will process and display a digital signature in a PDF file, but there are not a lot of them in free PDF viewers. As I said above, if dsaks can get by with a custom stamp then great, but if he/she needs a cryptographically sound digital signature then there is no reason why not to created it because everyone can get the free Reader for the Mac, Windows and Linux platforms.
Steve

Solaris 10 boot error 15 file not found

During a reboot to one of our solaris 10 servers when it reboots it comes up with this error message
Findroot (pool_rpool,0,a)
     Filesystem type is zfs, partition type 0xbf
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
loading '/platform/i86pc/multiboot -B $ZFS-BootFS' ....
Error 15: File not found
press any key to continue...
The grub file menu.lst content is as follows
#pragma ident   "@(#)menu.lst   1.2     10/06/11 SMI"
default 0
timeout 10
# Uncomment the following line to enable GRUB splashimage on console
splashimage /boot/grub/splash.xpm.gz
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Oracle Solaris 10 1/13 s10x_u11wos_24a X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
#---------------------END BOOTADM--------------------
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot -s
module /boot/amd64/x86.miniroot-safe
#---------------------END BOOTADM--------------------
During a shell session using a recovery disk i mount the rpool to /a , if I do a zpool status it comes back that rpool mirror-0 with both disks are online
rpool          ONLINE
mirror-0      ONLINE
c0t0d0s0      ONLINE
c0t1d0s0      ONLINE
However if I do a zpool import it shows
rpool          UNAVAIL     insufficient replicas
mirror-0     UNAVAIL     insufficient replicas
     c0t0d0s0 FAULTED   corrupted data
     c0t1d0s8 UNAVAIL    corrupted data
This is highly confusing
Any help would be much appreciated

What's confusing to me is that the second disk in this mirrored root pool shows c0t1d0s0 in one output and c0t1d0s8 is another output. I hope this is a typo. Otherwise, you need to find out why this device path changed. Its look like the primary disk is faulted. FMA will tell you if the disk is faulted and whether the second disk's device path changed. You will have to boot from media or an install server.
Thanks, Cindy

Digital Signature(not detached)

Hello!
Is it possible to create not detached signature? For example, signature of file. non xml!

All digital signatures are detached, by nature. What makes them part of the signed object are technical standards describing the signed object with the included signature (as in PKCS7 or XMLSignature). You can, technically, create a signature on any object - text or binary - and attach the signature to the object in any manner that is meaningful to your application. However, if you want the signed object to be portable, then you must use one of the defined standards so that other applications can understand where your object begins and ends, where the signature begins and ends, etc. without your having to provide detailed schematics of your "proprietary" data structure.
In the long term, even if you believe other applications will never access your signed objects, you are better off using an industry standard for the signed objects since you will enhance your own knowledge on the standards (thus increasing the value of your own skills), while maintaining some semblance of order in this increasingly chaotic IT world.

Digital signature not visible

For 4 months the visible signature worked perfect.
But today when I make a visible signature it is not visible.
It seems to be kind of periodic:
I tried one PDF document, and the visible signature was not visible
Then I tried with another document, and the first time the signature was visible.
When I tried more times on the original second document, the signature was every time invisible.
I use Windows 7, 32 bit, and Adobe Acrobat XI 11.0.10.
Regards Finn

I use digital signature with certificate.
I don't know why I got the idea that the signature was there, but invisible.
I can now see that I still have the possibility to sign the document where the signature is "invisible", this indicates of course that there is no signature.
And there is no signatures in the Signature panel.
However, this is what I see:
I press the icon "Digitally sign document"
I drag with the mouse to select the area for the signature
In the dialog box "Sign document" I choose reason, and click "Sign"
I choose a name for the signed document
I give the code for the certificate(at this time the signature is visible on the document)
After this there is no signature but the ducument was saved with the new file name
I don't get any error mesages during this
But in the dialog box "Sign document" I now tried to press the "Review" button
and I get the message:
Report code          Description
2007                    Page content may silently change
1001                    Comment or form field may silently change
1002                    Comment or form field may silently change
Does this information help?

[SOLVED] boot failure: No inittab file found

Hi,
While trying to upgrade my system according to the recent /usr/bin intervention, I managed to get into an unbootable state:
INIT: No inittab file found
Enter runlevel:
This is because, stupidly, I'd simply removed initscripts. (I thought I'd properly completed the systemd and all previous migrations, considering my system up to date, and figured initscripts was an obsolete remnant.)
pacman -Qqo /bin /sbin /usr/sbin | pacman -Qm -
returned
grub 0.97-21
grub 0.97-21
consolekit 0.4.6-4
initscripts 2012.10.1-1
So I (again, stupidly) removed consolekit and initscripts and upgraded GRUB (by installing grub-bios and following the guide). I then proceeded to upgrade as described in the intervention notice.
This, of course, resulted in the following error on rebooting:
INIT: No inittab file found
Enter runlevel:
I've since spent hours trying to repair the system with a live system (booting arch off a thumb drive) and arch-chroot - but
I don't know what I should install to make things work again
I haven't managed to figure out how to install packages while offline (despite reading through the guide)
Any assistance would be immensely appreciated!
Last edited by FND (2013-06-09 17:23:15)

Thanks for the quick response!
Frankly, I'm not quite sure what to make of that link (thus revealing my general ignorance... ).
Here's my /etc/boot/grub.cfg:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

Digital signature not avalaible on my document

Hello,
I'm working on the implementation of digital signature with the ADS but i have a big problem.The sign button functionnality is not available anymore on my document. In the sign menu, the only button available is the "Preview Document".
The security properties of the document indicates that the Signing is allowed.
My process consists in an offline scenario.
I'm working with adobe reader version 8.0.
Do you have any idea to resolve this problem?
Thx for your help,
Pelaez Lopez Philippe

Hi Philippe,
You could try placing a signature field from the pallete when designing the form in the Adobe Designer.
Then when you run the application (for eg. a web dynpro for java) that contains the Adobe form, you could sign the document with a valid signature.
Hope this helps.

Boot failure: Digital signature not found

Similar Messages

Maybe you are looking for