Boot failure on G5 - how to change startup?

I added a new drive to dual processor powerpc g5 running os10.5.6. It worked fine.
I changed the startup to old disk, OS 10.5 boot disk and back to new disk 6-8 times and no problem.
Last night I changed startup to old disk, rebooted and no go.
I get a gray screen (no apple logo), then a blue/green screen (my background color) and there it stalls.
I've tried rebooting with the OS boot disk but it doesn't override startup preference.
Tried the option key after the reboot fanfare, also tried it as soon as reboot stops. Neither work.
I tried doing all of the above after machine had been shut down overnight.
Still doesn't work.
What now?

First, thanks for your help. Whatever the outcome. Now on to the specifics:
Didn't work -- Safe Boot from the HD, (holding Shift key down at bootup).
Didn't work -- Command+Shift+Option+Delete  bypasses the disk selected in the Startup Disk control panel in  favor of an external device or from CD-ROM.
I don't have an bootable disk/external device, but I do have the OSX/Leopard boot disk in the superdrive.
Didn't work -- Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
I did go to the provided URL and went through the steps a couple of times.
But I'm thinking the reset would set the startup to the original HD, which is the one I'm having trouble with.
Is it a Wireless or USB Keyboard? It's a USB Keyboard with a wireless mouse.
Would this work? Turn it all off, remove the original HD, and Would I need to put the second/new HD in its place? Or just remove the original and would the boot up process automatically roll over to the new HD? Or just hang in its everlasting search for the old HD?
I had backed up everything from it except some movie clips, including some of my husband before he got sick. I'd really just like to get those clips off and the rest of it can all go to Jupiter.
Boot failure on G5 - how to change startup? 

Similar Messages

  • How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

    Hi,
    I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
    Thank you,
    Liusc

    If you boot with the Option key depressed what boot options are shown?
    Also:
    Restart your computer
    After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
    How to install Windows using Boot Camp - Apple Support

  • How to change startup volume

    This might be a silly question, but how can you change the volume of the signature start up sound on the new iMac?

    The startup sound uses the volume setting of the built-in speakers. So if you do not have external speakers connected, adjust the volume of the built-in speakers and that will change the volume of the startup sound.
    If you have external speakers connected, Mac OS X maintains separate sound volume settings for the built-in speakers and "headphones" (used by the external speakers). So you can disconnect the external speakers, adjust the sound volume of the built-in speakers, and reconnect the external speakers. The external speakers will still use its own sound volume. However, the startup sound always comes from the built-in speakers, so that separate volume setting will be used.

  • How to change startup programs

    Every time i start excell opens up how do i change this?

    Two possible reasons come to mind:
    1.  When you shut down, you may have "Reopen windows when logging back in" checked.  That would do it.
    2.  Check System Preferences > Users & Groups > Login Items

  • C3 - How to change startup profile?

    My C3 phone has suddently taken to starting up with the Silent profile selected. This is a pain because I keep missing calls but cannot find a way to make the general profile the default.
    Does anyone know the solution?
    I'm sure it must be something easy but I can't find it in the manual. :-(
    Alan G.

    Select Menu > Settings > Profiles.
    Select the desired profile and from the
    following:
    Activate — Activate the profile.
    Personalise — Modify the profile
    settings.
    Timed — Set the profile to be active until
    a certain time. When the time set for the
    profile expires, the previous profile that
    was not timed becomes active.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

    Hi,
    I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
    So basically here are my 2 questions:
    How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
    How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
    Any solutions are very much apreciated!
    Thanks!
    I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
    And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

    WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
    http://www.twocanoes.com/
    Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
    During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
    http://www.paragon-software.com/downloads/demo.html
    I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
    OS X
    Windows
    Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
    https://support.apple.com/kb/HT1427
    https://support.apple.com/kb/HT1553
    There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
    AppleHFS - the abilty to mount and read HFS volumes can be notorious.
    I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
    I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

    First, are you referring to packages or applications because the behavior is different.
    Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
    errors.
    Jason | http://blog.configmgrftw.com

  • An Apple genius pressed a few buttons before booting my computer then the screen changed to a database of parts of my computer and their status. How do i do this?

    An Apple genius pressed a few buttons before booting my computer then the screen changed to a database of parts of my computer and their status. How do i do this?

    Julianwerules wrote:
    then the screen changed to a database of parts of my computer and their status.
    can you elaborate more?   I'm not familiar with a database of parts..or I'm having a major brain ****.

  • Ibook g4 (2005) wont boot from cd.  always wants to boot from hd.  how do i change the boot sequence?

    so my ibook as i wrote will not boot from the cd rom.  it always wants to boot from the hd but i had the hd wiped b/c it had linux and it would not allow me to access the firmware.  now that the hd is clean i was able to access the firmware but i dont know how to change the boot sequence.  the starts to spin in the drive and acts like it want to boot from the cd but the cd just keeps spinning and i get a screen with a blinking question mark and smiley face.

    Hello and welcome to the support community.
    Why do you need to go into the firmware?
    If the disk is a boot disk like Mac OS X, then all you need to do is hold down 'C' key or the option key while the disk is in the drive and the iBook is booting up (After the chime)
    If either doesn't work, then there must be an issue with the disk not being a boot disk or corrupted. Alternatively a problem with the optical drive. You don't need to go into the firmware to change any boot selection.
    Hope this helps

  • K8N Neo4 - Disk Boot Failure, Insert System Disk

    Hello !
    Up an runnung with my new MoBo - for details se below,  thats good.  But...
      No matter how I change my BIOS settings, at startup I got the same message:
     Boot from CD : Disk boot failure, insert system disk and press enter
    When doing so, the PC is booting OK.
    Quit annoying, so glad for any hint !
    Greetings / Jan Björk

    Thanks TheBigMan for your welcome message !
    Glad the join the Forum, it´s great knowledgebase !
    I´ve  gone through the BIOS settings you are referring to. They are like this: (And have been so all the time)
       1:st Boot device       [Harddisk]
       Hard Disk Priority       [SCSI:0 Nvidia Mirror 115.03G]
    So there must be something else, thanks anyhow !
    I also wonder from where this message, "Boot from CD..etc", is coming, is it really from the BIOS ?
    Greetings / Jan Björk

  • Yosemite will not install and won't let me change startup disk, it's saying there is a file system problem but disk utilities can't fix it.

    I Downloaded the Yosemite upgrade and went to install it on my iMac. The install failed saying file System needed repair. Ran disk utility could do the verify but the repair button was grayed out. When I tried to change startup disk back it wouldn't let me , saying it couldn't gather enough file info. So I'm stuck and can't boot my Mac. How do I get out of this?

    Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Try to reboot normally.
    OS X Recovery
    OS X Recovery (2)

  • R12: "FRM-92101:There was a failure in the Forms Server during startup"

    LINUX VERSION:
    [oracle@USSLTC3118V StageR12]$ cat /etc/*-release
    Red Hat Enterprise Linux Server release 5.4 (Tikanga)
    LOGS:
    $/ebs/oracle/VIS/inst/apps/VIS_ussltc3118v/logs/ora/10.1.3/j2ee/forms/forms_default_group_1/application.log:
    12/06/07 08:55:15.661 formsweb: Forms session <11> aborted: unable to communicate with runtime process.
    12/06/07 08:55:15.663 formsweb: Forms session <11> exception stack trace:
    java.lang.StringIndexOutOfBoundsException: String index out of range: -6
    at java.lang.String.substring(String.java:1938)
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    12/06/07 10:02:25.980 formsweb: Forms session <12> aborted: unable to communicate with runtime process.
    12/06/07 10:02:25.980 formsweb: Forms session <12> exception stack trace:
    java.lang.StringIndexOutOfBoundsException: String index out of range: -6
    at java.lang.String.substring(String.java:1938)
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    [root@USSLTC3118V VIS]# cat ./inst/apps/VIS_ussltc3118v/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
    12/05/31 11:52:36 FormsServlet init():
    configFileName: /ebs/oracle/VIS/inst/apps/VIS_ussltc3118v/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    12/05/31 11:52:36 Oracle Containers for J2EE 10g (10.1.3.4.0) initialized
    12/06/05 16:23:05 ListenerServlet init()
    12/06/05 16:23:09 Forms session <1> failed during startup: no response from runtime process
    12/06/05 16:23:32 Forms session <2> aborted: unable to communicate with runtime process.
    12/06/06 09:23:04 Forms session <3> aborted: unable to communicate with runtime process.
    12/06/06 10:48:47 Forms session <4> aborted: unable to communicate with runtime process.
    12/06/06 12:43:05 Forms session <5> aborted: unable to communicate with runtime process.
    12/06/06 19:48:33 Forms session <6> aborted: unable to communicate with runtime process.
    12/06/06 19:49:04 Forms session <7> aborted: unable to communicate with runtime process.
    12/06/07 08:43:26 Forms session <8> aborted: unable to communicate with runtime process.
    12/06/07 08:46:39 Forms session <9> aborted: unable to communicate with runtime process.
    12/06/07 08:52:56 Forms session <10> aborted: unable to communicate with runtime process.
    12/06/07 08:55:15 Forms session <11> aborted: unable to communicate with runtime process.
    12/06/07 10:02:25 Forms session <12> aborted: unable to communicate with runtime process.
    [root@USSLTC3118V VIS]#
    Solutions I Tried:
    REMOVE
    rpm -e openmotif21-2.1.30-11.EL5
    INSTALL
    rpm -i openmotif21-2.1.30-11.EL5.i386.rpm
    [root@USSLTC3118V lib]# make -f ins_forms.mk install
    ins_forms.mk:42: /forms/lib/env_forms.mk: No such file or directory
    ins_forms.mk:581: warning: overriding commands for target `-pure'
    ins_forms.mk:574: warning: ignoring old commands for target `-pure'
    ins_forms.mk:583: warning: overriding commands for target `-quantify'
    ins_forms.mk:576: warning: ignoring old commands for target `-quantify'
    ins_forms.mk:585: warning: overriding commands for target `-cov'
    ins_forms.mk:578: warning: ignoring old commands for target `-cov'
    ins_forms.mk:588: warning: overriding commands for target `-pure'
    ins_forms.mk:581: warning: ignoring old commands for target `-pure'
    ins_forms.mk:590: warning: overriding commands for target `-quantify'
    ins_forms.mk:583: warning: ignoring old commands for target `-quantify'
    ins_forms.mk:592: warning: overriding commands for target `-cov'
    ins_forms.mk:585: warning: ignoring old commands for target `-cov'
    ins_forms.mk:595: warning: overriding commands for target `-pure'
    ins_forms.mk:588: warning: ignoring old commands for target `-pure'
    ins_forms.mk:597: warning: overriding commands for target `-quantify'
    ins_forms.mk:590: warning: ignoring old commands for target `-quantify'
    ins_forms.mk:599: warning: overriding commands for target `-cov'
    ins_forms.mk:592: warning: ignoring old commands for target `-cov'
    make: *** No rule to make target `/forms/lib/env_forms.mk'. Stop.
    [root@USSLTC3118V lib]#
    Any insight as to what else shall I try?

    How do you get this error?
    Was this working before? If yes, any changes been done recently?
    Have you tried to run AutoConfig and see if it completes successfully?
    Please see these docs.
    R12: "FRM-92101: There Was a Failure in the Forms Server During Startup" Error When Executing EXECUTE_QUERY in Forms [ID 1111113.1]
    R12: "FRM-92101: There was failure in the Forms Server during startup" Error While Submitting Concurrent Requests [ID 867501.1]
    Users Receive FRM-92101 oracle.forms.net.ConnectionException Errors When Launching E-Business Suite Forms Responsibility and Function [ID 1258305.1]
    Forms are Erroring with FRM-92101:There was a failure in the forms server during start up. [ID 1433329.1]
    Thanks,
    Hussein

  • Sudden total boot failure. Any idea what would cause this??

    Today I was adding more apps to my clean install (on an external drive) and I had to go back to my original "update" installation to get a password off Keychain (I did not migrate). After I got the pw, I shutdown and my Powerbook would not reboot! I got the chime and then utter blackness. No disk access was attempted on my external, nothing from internal drive, and still nothing when I tried the Leopard installation DVD.
    I kept trying and finally (after 10-15 minutes of getting nothing except the initial startup sound) the screen lit up and I got to the Startup Manager disk selection. I was still unable to boot from the DVD; the boot sequence had progressed only part way and then totally stalled (I gave it about 3 times as long as it would normally take to boot from a CD or DVD). I tried this twice more so I thought I had suffered catastrophic hardware failure.
    But, then, after a pram reset, I was able to restart into single-user mode and did a couple of the fsck's (file-system check in Unix) and it said the internal disk was OK both times. Got through login and to the Finder Desktop after a regular boot, and after a safe boot, but found that the Finder was corrupted and repeatedly crashed with almost everything I tried to do.
    Reluctantly then tried to boot from external drive and found that - it worked!
    Tried to fix internal drive unsuccessfully. Eventually found that DVD drive was working again too, so I did a Time Machine restore of the internal drive after booting from the Leopard install disk.
    After getting the internal drive to boot again (Time Machine worked!!), the Wacom tablet driver immediately crashed (even though I had supposedly loaded a Leopard-compatible version), so I then went to Terminal and got rid of all the StartupItems and PreferencePanes in the root Library and my user Library. I tried rebooting and since it did so without issue this time, I hooked up Time Machine and made a new backup.
    How did the total boot failure get caused? I had never seen anything like this before where the screen stayed totally black and not even the DVD would boot.
    I am now back to "normal" after 7 hours. Moral of the story is that even when your computer looks completely dead, keep trying. I just hope it doesn't happen again, since I'm not sure what the issue was.

    Faulty battery. Make Genius reservation and take this iPhone back.

  • DISK BOOT FAILURE: PLEASE INSERT SYSTEM DISK....

    Hi
    I have exhausted two full days on the following problem so I would greatly appreciate some help. The problem I am experiencing is that the disk will not boot on its own. I receive the "DISK BOOT FAILURE: PLEASE INSERT SYSTEM DISK...." error when starting up. I have run chkdsk, i have run Western Digital Diagnostics for Dos (quick test) and no problems come up with the drive. I have also jumpered pins 5 and 6 to force the drive to run at SATA-I speeds. Now here's the curious part: The disk boots up and functions absolutely perfectly IF and ONLY IF, the bios is set to boot from my IDE drive. Now on the IDE drive I have a boot.ini file set up to allow me to boot the SATA drive instead. Using this work around (i.e. boot from IDE, select SATA drive from boot menu) the drive seems to work just fine. However if i change the bios back to boot from the SATA drive (and therefore use its own boot.ini) I receive the error again and the boot will not continue.
    Here is my set up:
    MSI K8T Neo2-F v2.0 motherboard (with latest BIOS).
    Athlon 64 X2 4200+ dual core CPU
    1024GB DDR 400 RAM
    1 Western Digital 120GB IDE HD running on primary master.
    1 Pioneer DVD-108 DVD-RW running on secondary master.
    1 Western Digital 250GB (WD2500KS) running on SATA1.
    Nividia GeForce 6800 running on AGP.
    M-Audio Audiophile 2496 PCI
    Sound Blaster Audigy 2 ZS PCI
    Originally the system was as above without the new WD2500KS drive. I then bought the new SATA drive and installed windows to it with the intention of clearing windows from the original IDE and making it a storage drive. The above workaround is how I completed installation of Windows XP and installed my other programs, otherwise when rebooting during installation the disk would fail again.
    Another issue is that Windows will NOT designate the SATA as drive C. When disconnecting the IDE, the SATA will become "c:" but as soon as the IDE is plugged back in, it immediately claims "c:" again and the SATA becomes "d:". This is ascertained from running the Recovery Console and using 'map' for example. It is important that I get this to "c:" as I have programs which appear to look for files by an absolute path and will not find them on "d:".
    I have also tried to 'fixmbr' and this is the only time I have seen any curious message. Using the workaround the disk works fine. But when I tried to 'fixmbr', the system warned that the disk had a non-standard boot record (or something to that effect). But in any case, boot seems fine so long as we're not booting it directly. 
    Finally, I should confirm that the BIOS is set to run the SATA in IDE mode and not SATA (although as a sanity check I have run it in RAID and the result is the same).
    I have no idea at this stage whether the problem lies with the SATA drive or the motherboard. I have sent a copy of this to WD "for further troubleshooting", and am posting a copy here for any advice on the mobo side of things.
    Many thanks

    Thank you for your reply. You are right, I've just resolved the problem today and discovered that this was the case.
    To close the topic and leave advice for anyone else facing similar difficulties I will sum up the progress since the initial post.
    Having tried absolutely everything else, I thought "what happens if i make this sata c:?" so I decided to edit the registry and force a drive letter change to ensure that my SATA was "c:". After having done this the SATA for the first time successfully booted to the boot menu! However when loading up into Windows it kept hanging. So next I thought all I need to do is a repair install now, I disconnected the IDE to leave the SATA only and attempted this. Unfortunatley the repair install also kept hanging. The Microsoft support page detailing how to force the drive letter change does warn that doing so can mess everything up unless the problem occurred in some specific circumstances.
    So a new install was in order. I hooked up the IDE again and booted from it, backed up all my files to the IDE, and then disconnected it again. Then booted from a Western Digital diagnostics disk and zero filled the SATA - this was more for my own sanity so as not to worry about dodgy MBR's and what not. Then booted from WINXP CD and formatted and reinstalled fresh.
    Install was successful.
    Hooked up IDE externally to dump back my backed up files. Then deleted the IDE's partition and formatted it. Powered down, connected the IDE internally again - booted from SATA successfully (now on c:)... the IDE was no longer recognised as a "system" disk in Disk Manager, so I gave it a drive letter and hey presto we're business again!! One SATA system disk on drive c: and one IDE storage drive!
    SHORT VERSION: If you are adding an SATA drive to an IDE set up, and want the SATA to be your OS disk, unhook all the IDE's first... if the target drive is not in isolation when installing Windows, all kinds of problems can ensue which are very difficult to correct after the install.

  • How to change CUE ip address?

    Hi,
    We moved to a new location and using comcast as ISP. I was setting up the phone system today and met a few problems.
    1. First of all, all the phones are connected and working(total of 4), but I can only see 3 of them showing up in the CCA. Whats happening here?
    2. I wanted to change the user name which appears on the phone using the CCA, CCA told me that the settings were successfully sent to UC520, I restarted the phone and uc520, but the names on the phones remain unchanged?
    3. I forgot the password of the voicemail for one of the phone, and wanted to changed in the CUE. so I went to 10.1.10.1,but some comcast login page showed up instead of CUE. so I want to know how to change the IP address of CUE? I don`t know the CLI commands so please teach me if it can only be done with CLI. I have only used CCA in the past. Could this be the reason why for problem 1 and 2? I`m feeling wierd because all the phones can be used to call in/out.
    my data vlan is 192.168.0.0 and voice vlan is 192.168.2.0 let me know if you need any other info.
    need help urgently as I want to resolve this problem asap.
    Thanks in advance.
    Building configuration...
    Current configuration : 31483 bytes
    ! Last configuration change at 19:39:02 EST Mon Jan 27 2014 by admin
    version 15.1
    parser config cache interface
    no service pad
    no service timestamps debug uptime
    service timestamps log datetime msec
    service password-encryption
    service internal
    service compress-config
    service sequence-numbers
    hostname UC_520
    boot-start-marker
    boot-end-marker
    no logging buffered
    no logging rate-limit
    enable secret 4 X4ZqtPJ///KxuEWxHSsJrv3beQVnz2ise/xj8fF6eFU
    aaa new-model
    aaa authentication login default local
    aaa session-id common
    clock timezone EST -5 0
    clock summer-time EDT recurring
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP-self-signed-3885458945
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-3885458945
    revocation-check none
    rsakeypair TP-self-signed-3885458945
    crypto pki certificate chain TP-self-signed-3885458945
    certificate self-signed 01
      3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 33383835 34353839 3435301E 170D3133 30383136 32303534
      32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 38383534
      35383934 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100E470 89FBE9D2 67ED2223 338A6991 0CF59918 BDEF6020 545DFCAF 93A17C39
      BEE49E0E 4EDEE26B CCE65E3E 44443BFC E1CE6B5E FE8906DA 3290C015 450721F3
      8FB997D1 74A9EAD1 2FB11EAF 7E346F69 4AF873DE A93DCCC0 0607406E 09C0D5D4
      47552B50 34398AF9 A5F9CC57 1A2CBCE8 D8DCE2E9 6702F3DD 77505122 2284BDC8
      96730203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
      551D2304 18301680 14F3FB0C E861F89C 588B7B22 97DCB6B8 95F52EAF 3F301D06
      03551D0E 04160414 F3FB0CE8 61F89C58 8B7B2297 DCB6B895 F52EAF3F 300D0609
      2A864886 F70D0101 05050003 81810067 7B14BD34 CF6FE9A5 C2B125A9 347023AD
      58DAB6CB E64FA260 41DA2B0B 1921A21D BAED2A0F 47172233 A589F64D 74D70BB5
      2790DE19 B905BCFF 18DB2EE5 F397C92D 7522DEB0 B4968E27 0F2CCF98 DCCE40C5
      4BF1736A 1C945AFA E0EF7A33 E529F94C CC99549A 051CA1BD E33495DB 0B79451C
      5666954E 10E691DF 5D5CCC50 CB72D2
          quit
    dot11 syslog
    dot11 ssid cisco-data
    vlan 1
    authentication open
    dot11 ssid cisco-voice
    vlan 100
    authentication open
    ip source-route
    ip cef
    ip dhcp relay information trust-all
    ip dhcp excluded-address 192.168.0.1 192.168.0.99
    ip dhcp excluded-address 192.168.0.151 192.168.0.255
    ip dhcp excluded-address 192.168.2.1 192.168.2.9
    ip dhcp excluded-address 192.168.2.241 192.168.2.255
    ip dhcp excluded-address 192.168.2.99
    ip dhcp pool phone
    network 192.168.2.0 255.255.255.0
    default-router 192.168.2.99
    option 150 ip 192.168.2.99
    ip name-server 205.152.111.23
    ip name-server 205.152.144.23
    ip inspect WAAS flush-timeout 10
    ip inspect name SDM_LOW dns
    ip inspect name SDM_LOW ftp
    ip inspect name SDM_LOW h323
    ip inspect name SDM_LOW https
    ip inspect name SDM_LOW icmp
    ip inspect name SDM_LOW imap
    ip inspect name SDM_LOW pop3
    ip inspect name SDM_LOW netshow
    ip inspect name SDM_LOW rcmd
    ip inspect name SDM_LOW realaudio
    ip inspect name SDM_LOW rtsp
    ip inspect name SDM_LOW esmtp
    ip inspect name SDM_LOW sqlnet
    ip inspect name SDM_LOW streamworks
    ip inspect name SDM_LOW tftp
    ip inspect name SDM_LOW tcp router-traffic
    ip inspect name SDM_LOW udp router-traffic
    ip inspect name SDM_LOW vdolive
    no ipv6 cef
    multilink bundle-name authenticated
    stcapp ccm-group 1
    stcapp
    trunk group ALL_FXO
    max-retry 5
    voice-class cause-code 1
    hunt-scheme longest-idle
    voice call send-alert
    voice rtp send-recv
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    sip
      no update-callerid
    voice class codec 1
    codec preference 1 g711ulaw
    codec preference 2 g729r8
    voice class cause-code 1
    no-circuit
    voice register global
    mode cme
    source-address 192.168.2.99 port 5060
    max-dn 88
    max-pool 22
    load 9971 sip9971.9-2-2
    load 9951 sip9951.9-2-2
    load 8961 sip8961.9-2-2
    timezone 12
    create profile sync 0423457390373118
    voice hunt-group 1 parallel
    final 201
    list 201,223,227,239,301
    timeout 16
    pilot 511
    voice translation-rule 1000
    rule 1 /.*/ //
    voice translation-rule 1112
    rule 1 /^9/ //
    voice translation-rule 2001
    voice translation-rule 2002
    rule 1 /^6/ //
    voice translation-rule 2222
    rule 1 /^91900......./ //
    rule 2 /^91976......./ //
    voice translation-profile CALLER_ID_TRANSLATION_PROFILE
    translate calling 1111
    voice translation-profile CallBlocking
    translate called 2222
    voice translation-profile OUTGOING_TRANSLATION_PROFILE
    translate called 1112
    voice translation-profile XFER_TO_VM_PROFILE
    translate redirect-called 2002
    voice translation-profile nondialable
    translate called 1000
    voice-card 0
    fax interface-type fax-mail
    license udi pid UC520W-16U-4FXO-K9 sn FTX1251Y0DC
    archive
    log config
      logging enable
      logging size 600
      hidekeys
    username admin privilege 15 secret 4 X4ZqtPJ///KxuEWxHSsJrv3beQVnz2ise/xj8fF6eFU
    ip tftp source-interface Loopback0
    class-map match-all _class_Voice0
    match ip dscp ef
    class-map match-all _class_Voice1
    match ip dscp cs3
    policy-map Voice
    class _class_Voice0
      set cos 6
    class _class_Voice1
      set cos 3
    bridge irb
    interface Loopback0
    description $FW_INSIDE$
    ip address 10.1.10.2 255.255.255.252
    ip access-group 101 in
    ip nat inside
    ip virtual-reassembly in
    interface FastEthernet0/0
    description $ETH-WAN$
    no ip address
    ip virtual-reassembly in
    load-interval 30
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface Integrated-Service-Engine0/0
    description cue is initialized with default IMAP group
    ip unnumbered Loopback0
    ip nat inside
    ip virtual-reassembly in
    service-module ip address 10.1.10.1 255.255.255.252
    service-module ip default-gateway 10.1.10.2
    interface FastEthernet0/1/0
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/1
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/2
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/3
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/4
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/5
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/6
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/7
    switchport voice vlan 100
    no ip address
    macro description cisco-phone
    spanning-tree portfast
    interface FastEthernet0/1/8
    switchport mode trunk
    switchport voice vlan 100
    no ip address
    macro description cisco-switch
    interface Dot11Radio0/5/0
    no ip address
    ssid cisco-data
    ssid cisco-voice
    speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    antenna receive right
    antenna transmit right
    service-policy output Voice
    interface Dot11Radio0/5/0.1
    encapsulation dot1Q 1 native
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 spanning-disabled
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0/5/0.100
    encapsulation dot1Q 100
    bridge-group 100
    bridge-group 100 subscriber-loop-control
    bridge-group 100 spanning-disabled
    bridge-group 100 block-unknown-source
    no bridge-group 100 source-learning
    no bridge-group 100 unicast-flooding
    interface Vlan1
    no ip address
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface Vlan100
    no ip address
    bridge-group 100
    bridge-group 100 spanning-disabled
    interface Dialer0
    description $FW_OUTSIDE$
    ip address negotiated
    ip access-group 109 in
    ip mtu 1452
    ip nat outside
    ip inspect SDM_LOW out
    ip virtual-reassembly in
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname [email protected]
    ppp chap password 7 121D001B1E535E56
    ppp pap sent-username [email protected] password 7 121D001B1E535E56
    ppp ipcp dns request
    interface BVI1
    ip address 192.168.0.55 255.255.255.0
    ip access-group 104 in
    ip access-group 108 out
    ip helper-address 192.168.0.99
    ip nat inside
    ip virtual-reassembly in
    ip tcp adjust-mss 1412
    interface BVI100
    description $FW_INSIDE$
    ip address 192.168.2.99 255.255.255.0
    ip access-group 102 in
    ip access-group 107 out
    ip nat inside
    ip virtual-reassembly in
    ip tcp adjust-mss 1412
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http path flash:/gui
    ip dns server
    ip nat inside source list 1 interface Dialer0 overload
    ip route 0.0.0.0 0.0.0.0 192.168.0.99
    ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
    access-list 1 remark SDM_ACL Category=2
    access-list 1 permit 10.1.1.0 0.0.0.255
    access-list 1 permit 192.168.0.0 0.0.0.255
    access-list 1 permit 10.1.10.0 0.0.0.3
    access-list 100 remark auto generated by SDM firewall configuration
    access-list 100 remark SDM_ACL Category=1
    access-list 100 permit ip 192.168.10.0 0.0.0.255 any
    access-list 100 deny   ip host 255.255.255.255 any
    access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 100 permit ip any any
    access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_6##
    access-list 101 remark SDM_ACL Category=1
    access-list 101 permit tcp 192.168.2.0 0.0.0.255 eq 2000 any
    access-list 101 permit udp 192.168.2.0 0.0.0.255 eq 2000 any
    access-list 101 permit ip 192.168.2.0 0.0.0.255 any
    access-list 101 deny   ip host 255.255.255.255 any
    access-list 101 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 101 permit ip any any
    access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
    access-list 102 remark SDM_ACL Category=1
    access-list 102 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
    access-list 102 permit udp 10.1.10.0 0.0.0.3 any eq 2000
    access-list 102 permit ip 10.1.10.0 0.0.0.3 any
    access-list 102 deny   ip host 255.255.255.255 any
    access-list 102 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 102 permit ip any any
    access-list 103 remark SDM_ACL Category=64
    access-list 103 permit ip any any
    access-list 104 remark SDM_ACL Category=64
    access-list 104 permit ip any any
    access-list 105 remark SDM_ACL Category=64
    access-list 105 permit ip any any
    access-list 106 remark SDM_ACL Category=64
    access-list 106 permit ip any any
    access-list 107 remark SDM_ACL Category=64
    access-list 107 permit ip any any
    access-list 108 remark SDM_ACL Category=64
    access-list 108 permit ip any any
    access-list 109 remark auto generated by SDM firewall configuration##NO_ACES_14##
    access-list 109 remark SDM_ACL Category=1
    access-list 109 permit ip 10.1.10.0 0.0.0.3 any
    access-list 109 permit ip 192.168.2.0 0.0.0.255 any
    access-list 109 permit udp host 205.152.111.23 eq domain any
    access-list 109 permit udp host 205.152.144.23 eq domain any
    access-list 109 permit icmp any any echo-reply
    access-list 109 permit icmp any any time-exceeded
    access-list 109 permit icmp any any unreachable
    access-list 109 permit ip 10.0.0.0 0.255.255.255 any
    access-list 109 deny   ip 172.16.0.0 0.15.255.255 any
    access-list 109 permit ip 192.168.0.0 0.0.255.255 any
    access-list 109 deny   ip 127.0.0.0 0.255.255.255 any
    access-list 109 deny   ip host 255.255.255.255 any
    access-list 109 permit ip host 0.0.0.0 any
    access-list 109 permit ip any any
    dialer-list 1 protocol ip permit
    snmp-server community public RO
    tftp-server flash:/phones/521_524/cp524g-8-1-17.bin alias cp524g-8-1-17.bin
    tftp-server flash:/phones/7916/B016-1-0-4.SBN alias B016-1-0-4.SBN
    tftp-server flash:/phones/7937/apps37sccp.1-4-4-0.bin alias apps37sccp.1-4-4-0.bin
    tftp-server flash:/phones/7940_7960/P00308010200.bin alias P00308010200.bin
    tftp-server flash:/phones/7940_7960/P00308010200.loads alias P00308010200.loads
    tftp-server flash:/phones/7940_7960/P00308010200.sb2 alias P00308010200.sb2
    tftp-server flash:/phones/7940_7960/P00308010200.sbn alias P00308010200.sbn
    tftp-server flash:/phones/7941_7961/apps41.9-1-1TH1-16.sbn alias apps41.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7941_7961/cnu41.9-1-1TH1-16.sbn alias cnu41.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7941_7961/cvm41sccp.9-1-1TH1-16.sbn alias cvm41sccp.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7941_7961/dsp41.9-1-1TH1-16.sbn alias dsp41.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7941_7961/jar41sccp.9-1-1TH1-16.sbn alias jar41sccp.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7941_7961/SCCP41.9-1-1SR1S.loads alias SCCP41.9-1-1SR1S.loads
    tftp-server flash:/phones/7941_7961/term41.default.loads alias term41.default.loads
    tftp-server flash:/phones/7941_7961/term61.default.loads alias term61.default.loads
    tftp-server flash:/phones/7942_7962/apps42.9-1-1TH1-16.sbn alias apps42.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7942_7962/cnu42.9-1-1TH1-16.sbn alias cnu42.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7942_7962/cvm42sccp.9-1-1TH1-16.sbn alias cvm42sccp.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7942_7962/dsp42.9-1-1TH1-16.sbn alias dsp42.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7942_7962/jar42sccp.9-1-1TH1-16.sbn alias jar42sccp.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7942_7962/SCCP42.9-1-1SR1S.loads alias SCCP42.9-1-1SR1S.loads
    tftp-server flash:/phones/7942_7962/term42.default.loads alias term42.default.loads
    tftp-server flash:/phones/7942_7962/term62.default.loads alias term62.default.loads
    tftp-server flash:/phones/7945_7965/apps45.9-1-1TH1-16.sbn alias apps45.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7945_7965/cnu45.9-1-1TH1-16.sbn alias cnu45.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7945_7965/cvm45sccp.9-1-1TH1-16.sbn alias cvm45sccp.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7945_7965/dsp45.9-1-1TH1-16.sbn alias dsp45.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7945_7965/jar45sccp.9-1-1TH1-16.sbn alias jar45sccp.9-1-1TH1-16.sbn
    tftp-server flash:/phones/7945_7965/SCCP45.9-1-1SR1S.loads alias SCCP45.9-1-1SR1S.loads
    tftp-server flash:/phones/7945_7965/term45.default.loads alias term45.default.loads
    tftp-server flash:/phones/7945_7965/term65.default.loads alias term65.default.loads
    tftp-server flash:/ringtones/Analog1.raw alias Analog1.raw
    tftp-server flash:/ringtones/Analog2.raw alias Analog2.raw
    tftp-server flash:/ringtones/AreYouThere.raw alias AreYouThere.raw
    tftp-server flash:/ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xml
    tftp-server flash:/ringtones/RingList.xml alias RingList.xml
    tftp-server flash:/ringtones/AreYouThereF.raw alias AreYouThereF.raw
    tftp-server flash:/ringtones/Bass.raw alias Bass.raw
    tftp-server flash:/ringtones/CallBack.raw alias CallBack.raw
    tftp-server flash:/ringtones/Chime.raw alias Chime.raw
    tftp-server flash:/ringtones/Classic1.raw alias Classic1.raw
    tftp-server flash:/ringtones/Classic2.raw alias Classic2.raw
    tftp-server flash:/ringtones/ClockShop.raw alias ClockShop.raw
    tftp-server flash:/ringtones/Drums1.raw alias Drums1.raw
    tftp-server flash:/ringtones/Drums2.raw alias Drums2.raw
    tftp-server flash:/ringtones/FilmScore.raw alias FilmScore.raw
    tftp-server flash:/ringtones/HarpSynth.raw alias HarpSynth.raw
    tftp-server flash:/ringtones/Jamaica.raw alias Jamaica.raw
    tftp-server flash:/ringtones/KotoEffect.raw alias KotoEffect.raw
    tftp-server flash:/ringtones/MusicBox.raw alias MusicBox.raw
    tftp-server flash:/ringtones/Piano1.raw alias Piano1.raw
    tftp-server flash:/ringtones/Piano2.raw alias Piano2.raw
    tftp-server flash:/ringtones/Pop.raw alias Pop.raw
    tftp-server flash:/ringtones/Pulse1.raw alias Pulse1.raw
    tftp-server flash:/ringtones/Ring1.raw alias Ring1.raw
    tftp-server flash:/ringtones/Ring2.raw alias Ring2.raw
    tftp-server flash:/ringtones/Ring3.raw alias Ring3.raw
    tftp-server flash:/ringtones/Ring4.raw alias Ring4.raw
    tftp-server flash:/ringtones/Ring5.raw alias Ring5.raw
    tftp-server flash:/ringtones/Ring6.raw alias Ring6.raw
    tftp-server flash:/ringtones/Ring7.raw alias Ring7.raw
    tftp-server flash:/ringtones/Sax1.raw alias Sax1.raw
    tftp-server flash:/ringtones/Sax2.raw alias Sax2.raw
    tftp-server flash:/ringtones/Vibe.raw alias Vibe.raw
    tftp-server flash:/Desktops/CampusNight.png
    tftp-server flash:/Desktops/TN-CampusNight.png
    tftp-server flash:/Desktops/CiscoFountain.png
    tftp-server flash:/Desktops/TN-CiscoFountain.png
    tftp-server flash:/Desktops/CiscoLogo.png
    tftp-server flash:/Desktops/TN-CiscoLogo.png
    tftp-server flash:/Desktops/Fountain.png
    tftp-server flash:/Desktops/TN-Fountain.png
    tftp-server flash:/Desktops/MorroRock.png
    tftp-server flash:/Desktops/TN-MorroRock.png
    tftp-server flash:/Desktops/NantucketFlowers.png
    tftp-server flash:/Desktops/TN-NantucketFlowers.png
    tftp-server flash:Desktops/320x212x16/List.xml
    tftp-server flash:Desktops/320x212x12/List.xml
    tftp-server flash:Desktops/320x216x16/List.xml
    tftp-server flash:/bacdprompts/en_bacd_allagentsbusy.au alias en_bacd_allagentsbusy.au
    tftp-server flash:/bacdprompts/en_bacd_disconnect.au alias en_bacd_disconnect.au
    tftp-server flash:/bacdprompts/en_bacd_enter_dest.au alias en_bacd_enter_dest.au
    tftp-server flash:/bacdprompts/en_bacd_invalidoption.au alias en_bacd_invalidoption.au
    tftp-server flash:/bacdprompts/en_bacd_music_on_hold.au alias en_bacd_music_on_hold.au
    tftp-server flash:/bacdprompts/en_bacd_options_menu.au alias en_bacd_options_menu.au
    tftp-server flash:/bacdprompts/en_bacd_welcome.au alias en_bacd_welcome.au
    tftp-server flash:/bacdprompts/en_bacd_xferto_operator.au alias en_bacd_xferto_operator.au
    radius-server attribute 31 send nas-port-detail
    control-plane
    bridge 1 route ip
    bridge 100 route ip
    voice-port 0/0/0
    shutdown
    caller-id enable
    voice-port 0/0/1
    shutdown
    caller-id enable
    voice-port 0/0/2
    shutdown
    caller-id enable
    voice-port 0/0/3
    shutdown
    caller-id enable
    voice-port 0/1/0
    trunk-group ALL_FXO 64
    connection plar 201
    shutdown
    caller-id enable
    voice-port 0/1/1
    trunk-group ALL_FXO 64
    connection plar opx 511
    description Configured by CCA 4 FXO-0/1/1-Custom-BG
    caller-id enable
    voice-port 0/1/2
    trunk-group ALL_FXO 64
    connection plar opx 511
    description Configured by CCA 4 FXO-0/1/2-Custom-BG
    caller-id enable
    voice-port 0/1/3
    trunk-group ALL_FXO 64
    connection plar 204
    shutdown
    caller-id enable
    voice-port 0/4/0
    auto-cut-through
    signal immediate
    input gain auto-control -15
    description Music On Hold Port
    sccp local Loopback0
    sccp ccm 192.168.2.99 identifier 1 version 3.1
    sccp
    sccp ccm group 1
    associate ccm 1 priority 1
    dial-peer cor custom
    name internal
    name local
    name local-plus
    name international
    name national
    name national-plus
    name emergency
    name toll-free
    dial-peer cor list call-internal
    member internal
    dial-peer cor list call-local
    member local
    dial-peer cor list call-local-plus
    member local-plus
    dial-peer cor list call-national
    member national
    dial-peer cor list call-national-plus
    member national-plus
    dial-peer cor list call-international
    member international
    dial-peer cor list call-emergency
    member emergency
    dial-peer cor list call-toll-free
    member toll-free
    dial-peer cor list user-internal
    member internal
    member emergency
    dial-peer cor list user-local
    member internal
    member local
    member emergency
    member toll-free
    dial-peer cor list user-local-plus
    member internal
    member local
    member local-plus
    member emergency
    member toll-free
    dial-peer cor list user-national
    member internal
    member local
    member local-plus
    member national
    member emergency
    member toll-free
    dial-peer cor list user-national-plus
    member internal
    member local
    member local-plus
    member national
    member national-plus
    member emergency
    member toll-free
    dial-peer cor list user-international
    member internal
    member local
    member local-plus
    member international
    member national
    member national-plus
    member emergency
    member toll-free
    dial-peer voice 1 pots
    port 0/0/0
    no sip-register
    dial-peer voice 2 pots
    port 0/0/1
    no sip-register
    dial-peer voice 3 pots
    port 0/0/2
    no sip-register
    dial-peer voice 4 pots
    port 0/0/3
    no sip-register
    dial-peer voice 5 pots
    description ** MOH Port **
    destination-pattern ABC
    port 0/4/0
    no sip-register
    dial-peer voice 6 pots
    description 鬰atch all dial peer for BRI/PRI�
    translation-profile incoming nondialable
    incoming called-number .%
    direct-inward-dial
    dial-peer voice 50 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/0
    dial-peer voice 51 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/1
    dial-peer voice 52 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/2
    dial-peer voice 53 pots
    description ** incoming dial peer **
    incoming called-number ^AAAA$
    port 0/1/3
    dial-peer voice 54 pots
    description ** FXO pots dial-peer **
    destination-pattern A0
    port 0/1/0
    no sip-register
    dial-peer voice 55 pots
    description ** FXO pots dial-peer **
    destination-pattern A1
    port 0/1/1
    no sip-register
    dial-peer voice 56 pots
    description ** FXO pots dial-peer **
    destination-pattern A2
    port 0/1/2
    no sip-register
    dial-peer voice 57 pots
    description ** FXO pots dial-peer **
    destination-pattern A3
    port 0/1/3
    no sip-register
    dial-peer voice 2000 voip
    description ** cue voicemail pilot number **
    translation-profile outgoing XFER_TO_VM_PROFILE
    destination-pattern 396
    b2bua
    session protocol sipv2
    session target ipv4:10.1.10.1
    voice-class sip outbound-proxy ipv4:10.1.10.1 
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    dial-peer voice 2001 voip
    description ** cue auto attendant number **
    translation-profile outgoing PSTN_CallForwarding
    destination-pattern 398
    b2bua
    session protocol sipv2
    session target ipv4:10.1.10.1
    voice-class sip outbound-proxy ipv4:10.1.10.1 
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    dial-peer voice 2012 voip
    description ** cue prompt manager number **
    translation-profile outgoing PSTN_CallForwarding
    destination-pattern 240
    b2bua
    session protocol sipv2
    session target ipv4:10.1.10.1
    voice-class sip outbound-proxy ipv4:10.1.10.1 
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    dial-peer voice 58 pots
    trunkgroup ALL_FXO
    corlist outgoing call-emergency
    description **CCA*North American-7-Digit*Emergency**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 9911
    forward-digits all
    no sip-register
    dial-peer voice 59 pots
    trunkgroup ALL_FXO
    corlist outgoing call-emergency
    description **CCA*North American-7-Digit*Emergency**
    preference 5
    destination-pattern 911
    forward-digits all
    no sip-register
    dial-peer voice 60 pots
    trunkgroup ALL_FXO
    corlist outgoing call-local
    description **CCA*North American-7-Digit*10-Digit Local**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 9[2-9].........
    forward-digits all
    no sip-register
    dial-peer voice 61 pots
    trunkgroup ALL_FXO
    corlist outgoing call-local
    description **CCA*North American-7-Digit*Service Numbers**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 9[2-9]11
    forward-digits all
    no sip-register
    dial-peer voice 62 pots
    trunkgroup ALL_FXO
    corlist outgoing call-national
    description **CCA*North American-7-Digit*Long Distance**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 91[2-9]..[2-9]......
    forward-digits all
    no sip-register
    dial-peer voice 63 pots
    trunkgroup ALL_FXO
    corlist outgoing call-international
    description **CCA*North American-7-Digit*International**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 9011T
    forward-digits all
    no sip-register
    dial-peer voice 64 pots
    trunkgroup ALL_FXO
    corlist outgoing call-toll-free
    description **CCA*North American-7-Digit*Toll-Free**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 91800.......
    forward-digits all
    no sip-register
    dial-peer voice 65 pots
    trunkgroup ALL_FXO
    corlist outgoing call-toll-free
    description **CCA*North American-7-Digit*Toll-Free**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 91888.......
    forward-digits all
    no sip-register
    dial-peer voice 66 pots
    trunkgroup ALL_FXO
    corlist outgoing call-toll-free
    description **CCA*North American-7-Digit*Toll-Free**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 91877.......
    forward-digits all
    no sip-register
    dial-peer voice 67 pots
    trunkgroup ALL_FXO
    corlist outgoing call-toll-free
    description **CCA*North American-7-Digit*Toll-Free**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 91866.......
    forward-digits all
    no sip-register
    dial-peer voice 68 pots
    trunkgroup ALL_FXO
    corlist outgoing call-toll-free
    description **CCA*North American-7-Digit*Toll-Free**
    translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
    preference 5
    destination-pattern 91855.......
    forward-digits all
    no sip-register
    no dial-peer outbound status-check pots
    telephony-service
    video
    authentication credential admin admin
    fxo hook-flash
    max-ephones 22
    max-dn 88
    ip source-address 192.168.2.99 port 2000
    max-redirect 20
    auto assign 1 to 1 type bri
    calling-number initiator
    service phone videoCapability 1
    service phone ehookenable 1
    service phone SPA525-wifi-on yes
    service phone SPA525-protocol SPCP
    service phone SPA525-auto-detect-sccp yes
    service phone SPA525-http-write yes
    service phone SPA525-SSID cisco-voice
    service phone SPA525-readonly no
    service phone SPA525-Encryption-type DISABLE
    service dnis overlay
    service dnis dir-lookup
    service dss
    timeouts interdigit 5
    system message ZFI Engi & Const
    url services http://10.1.10.1/voiceview/common/login.do
    url authentication http://10.1.10.2/CCMCIP/authenticate.asp 
    cnf-file location flash:
    cnf-file perphone
    load 7916-12 B016-1-0-4
    load 7916-24 B016-1-0-4
    load 7937 apps37sccp.1-4-4-0
    load 7960-7940 P00308010200
    load 7941 SCCP41.9-1-1SR1S
    load 7941GE SCCP41.9-1-1SR1S
    load 7942 SCCP42.9-1-1SR1S
    load 7945 SCCP45.9-1-1SR1S
    load 7961 SCCP41.9-1-1SR1S
    load 7961GE SCCP41.9-1-1SR1S
    load 7962 SCCP42.9-1-1SR1S
    load 7965 SCCP45.9-1-1SR1S
    load 521G-524G cp524g-8-1-17
    time-zone 12
    keepalive 30 auxiliary 4
    voicemail 396
    max-conferences 8 gain -6
    call-forward pattern .T
    call-forward system redirecting-expanded
    hunt-group logout HLog
    moh flash:/media/music-on-hold.au
    multicast moh 239.10.16.16 port 2000
    web admin system name cisco secret 5 $1$AJGT$FDYMK5h1/Tiz2VQKQe2fS.
    dn-webedit
    time-webedit
    transfer-system full-consult dss
    transfer-pattern 9.T
    transfer-pattern .T
    transfer-pattern 6... blind
    secondary-dialtone 9
    night-service day Sun 00:00 23:59
    night-service day Mon 17:00 08:00
    night-service day Tue 17:00 08:00
    night-service day Wed 17:00 08:00
    night-service day Thu 17:00 08:00
    night-service day Fri 17:00 08:00
    night-service day Sat 00:00 23:59
    night-service date Jan 1 00:00 23:59
    night-service date Nov 25 00:00 23:59
    night-service date Dec 25 00:00 23:59
    fac standard
    create cnf-files version-stamp Jan 01 2002 00:00:00
    ephone-template  15
    url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
    softkeys remote-in-use  Newcall
    softkeys idle  Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
    softkeys seized  Cfwdall Endcall Redial Pickup Gpickup Callback
    softkeys connected  Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
    button-layout 7931 2
    ephone-template  16
    url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
    softkeys remote-in-use  Newcall
    softkeys idle  Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
    softkeys seized  Cfwdall Endcall Redial Pickup Gpickup Callback
    softkeys connected  Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
    ephone-template  17
    url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
    softkeys remote-in-use  CBarge Newcall
    softkeys idle  Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
    softkeys seized  Cfwdall Endcall Redial Pickup Gpickup Callback
    softkeys connected  Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
    ephone-template  18
    url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
    softkeys remote-in-use  CBarge Newcall
    softkeys idle  Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
    softkeys seized  Cfwdall Endcall Redial Pickup Gpickup Callback
    softkeys connected  Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
    button-layout 7931 2
    ephone-dn  9
    number BCD no-reg primary
    description MoH
    moh out-call ABC
    ephone-dn  81  octo-line
    number 301 no-reg primary
    pickup-group 1
    name wpb wpb
    call-forward busy 396
    call-forward noan 396 timeout 20
    ephone-dn  82  octo-line
    number 227 no-reg primary
    pickup-group 1
    name Robert Stewart
    call-forward busy 396
    call-forward noan 396 timeout 20
    ephone-dn  83  octo-line
    number 239 no-reg primary
    pickup-group 1
    name Conf Room
    call-forward busy 396
    call-forward noan 396 timeout 20
    ephone-dn  84  octo-line
    number 223 no-reg primary
    pickup-group 1
    label 223
    description George Guo
    name Caroline Wang
    call-forward busy 396
    call-forward noan 396 timeout 20
    ephone-dn  85  octo-line
    ring external
    number 201 no-reg primary
    pickup-group 1
    label 201
    description Caroline Wang
    name Cari Adamonis
    call-forward busy 396
    call-forward noan 396 timeout 20
    ephone-dn  86
    number 6... no-reg primary
    description ***CCA XFER TO VM EXTENSION***
    call-forward all 396
    ephone-dn  87
    number A801... no-reg primary
    mwi off
    ephone-dn  88
    number A800... no-reg primary
    mwi on
    ephone  1
    device-security-mode none
    mac-address 0015.6276.7240
    ephone-template 16
    username "mdeng" password 123456
    type 7940
    button  1:82
    ephone  2
    device-security-mode none
    mac-address 0015.6278.9118
    ephone-template 16
    username "jespinal" password 123456
    type 7940
    button  1:83
    ephone  3
    device-security-mode none
    mac-address 0015.6269.5B0C
    ephone-template 16
    username "wpb" password 123456
    mtp
    type 7940
    button  1:81
    ephone  5
    device-security-mode none
    mac-address 0012.4362.0B1E
    ephone-template 16
    username "GGuo" password 123456
    type 7940
    button  1:84
    ephone  6
    device-security-mode none
    mac-address 0015.6286.AE4F
    ephone-template 16
    username "cwang" password 123456
    type 7940
    missed-calls all
    button  1:85
    alias exec cca_voice_mode PBX
    alias exec cca_vm_notification schedule from_time=00 to_time=24
    banner login ^Cbanner login ^Cisco Configuration Assistant. Version: 3.2 (3). Sat Aug 24 11:52:57 EDT 2013^^C
    line con 0
    line aux 0
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    line vty 0 4
    transport preferred none
    transport input all
    line vty 5 100
    transport preferred none
    transport input all
    ntp master
    end

    how to change local ip address?Via an operating system command.
    It's not the sort of thing an application should be doing at all. IP addresses these days are assigned via DHCP. Why would you want to change it from within an application? It would probably disconnect all sockets for all running applications, invalidate the login, all kinds of bad effects.
    What is the actual requirement?

Maybe you are looking for

  • My ipod 3rd generation is not recognized by windows/itunes,please help

    My ipod 3rd generation is not recognized by windows/itunes,please help. Have tried restoring a number of times but did not work, any suggestions?thanks

  • IMac hanging... is my Hard Drive dead?

    Last week my 20 inch iMac (bought mid 2007, just after launch)started hanging weirdly. For no apparent reason, I got the Spinning Beachball of Death and everything was frozen. The dock was appearing when I moused over but no response, not possible to

  • Address book entries erased - need help

    Does anyone know how to recover erased Address book entries? I've found that Contact info inside a card can be easily erased/typed over and there does not appear to be an easy way to "undo" as the Edit/Undo command doesnt seem to work in this applica

  • Can we let Macpro Firewire out the 3rd display?

    My mac pro has only 1 graphcis card and its connected to 2 display monitor. I also have a firewire video output that I can choose output the video via firewire in Logic Pro. I don't know if we can just let mac pro output the video via firewire in all

  • Blurtooth in new iphone 3Gs

    I have just bought bought the new iphone and love it dearly except the fact that I can't get the Bluetooth to work. It will turn on but only says 'searching' continuously. Other phones can find it but, they aren't allowed to connect with it. It would