Boot freeze w/2.6 kernel
Just a FYI.. I tried installing the 2.6 IDE kernel on my Compaq Presario 2105US laptop and, on boot, it would freeze at
using anticipatory io scheduler
I tried with the 2.4 kernel and that worked though, so I don't know what the problem is. Hopefully I won't run into any problems upgrading to 2.6 now that Arch is installed. Anyway, I just thought I'd pass along this info..
P.S. Jet2k5 from the irc server was very helpful with my networking woes. Thanks again!
FUBAR wrote:So you pacman'd the 2.6-IDE kernel onto your system?
Yes, I pacman'd the 2.6 IDE kernel and it boots up just fine. I'm using 2.6.10 right now from Arch and didn't have to manually specify anything - it just worked. I haven't been able to figure out why it didn't work from the cd install but hey, just glad to have an alternative that works
Also, I'm not entirely sure that the io scheduler was the problem area. I actually tried editing the grub line to load different io schedulers and it always froze at the same place. I'm tempted to believe that it was actually freezing on what happens right after the io scheduler? But don't quote me on that.
Similar Messages
-
Boot freezes after clean install
I installed arch on my new desktop pc a couple of days. It was working fine until I tried to install fglxr. I run into a lot of problems, so I decided to make a new install.
After rebooting for the first time, my new system was working fine, after installing linux-pf and xorg-server and some other packages, I rebooted to make sure to install the catalyst drivers on the new kernel, but I found it freezes with no error after it says:
Loading linux image...
Loading intird image...
I've removed quiet kernel parameter and I've tried with debug and verbose, but I don't get any error.
I also (of course) tried to boot in to the "core" kernel, but the problem it's the same.
I've been trying for hours to do all sort of stuff, rebuilding the images, checking the paths to the kernel it's fine, ecc.
I'm really lost, because now my system has only the base stuff and I haven't changed any files :(Ok, I've been trying to debug this and the behaviour is REALLY weird, I've found that if I load the system directly from grub (I'm using uefi), it's get stuck with no errors after:
Loading Linux pf kernel ...
Loading initial ramdisk ...
BUT, if I run refind first, and then I load grub; the system starts. I would have think it's some kind of grub2 bug, but I don't understand how it could work after loading refind. Any clues? -
After update Mac Pro boots to grey screen with Kernel Panic. Help please.
It would be great if someone can help me out. Yesterday I did a software update of iTunes and osx (it said to ease update to Lion) and now my Mac Pro tower (MacPro3,1) boots to a grey screen, kernel panic, telling me that I need to power down and restart my machine. I can boot into osx via the safe mode but unfortunately I don't have an install disk to repair the system disk. What are my options?
The machine appears to work in safe mode. I have tried resetting the PRAM. Any help is greatly appreciated. Thanks.
In safe mode, I get this error report.
Interval Since Last Panic Report: 2403 sec
Panics Since Last Report: 4
Anonymous UUID: 2F681FF9-168D-42D2-865B-C00AD4C8FA30
Thu Oct 27 14:29:21 2011
panic(cpu 7 caller 0x560821): "getPhysicalSegment() out of 32b range 0x3f10000000, len 0x0, class IOGeneralMemoryDescriptor"@/SourceCache/xnu/xnu-1504.15.3/iokit/Kernel/IOMemory Descriptor.cpp:1594
Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
0x840b3cc8 : 0x21b837 (0x5dd7fc 0x840b3cfc 0x223ce1 0x0)
0x840b3d18 : 0x560821 (0x5e6dfc 0x10000000 0x3f 0x0)
0x840b3d68 : 0x55d2df (0x15d9fd80 0x0 0x0 0x16a4f580)
0x840b3d88 : 0x55ceee (0x16a4f580 0x0 0x0 0x10000)
0x840b3da8 : 0x8e7ee97e (0x16a4f580 0x0 0x0 0xffffffff)
0x840b3e18 : 0x543f60 (0x8eb44000 0x15c68b00 0x1 0x506b76)
0x840b3e78 : 0x542137 (0x15c68b00 0x8eb44000 0x16abd180 0x51a1b0)
0x840b3f28 : 0x5426e9 (0x15c68b00 0x16aba8c0 0x0 0x516766)
0x840b3f78 : 0x5443d5 (0x15c68b00 0x8 0x840b3fac 0x1)
0x840b3fc8 : 0x2a179c (0x15858690 0x0 0x2a17ab 0x15f17904)
Kernel Extensions in backtrace (with dependencies):
com.aja.iokit.kona3(8.0)@0x8e7c0000->0x8e806fff
dependency: com.apple.iokit.IOSerialFamily(10.0.3)@0x84130000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x84082000
dependency: com.apple.iokit.IOAudioFamily(1.8.3fc2)@0x8e635000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x8e6b2000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 22607847366
unloaded kexts:
(none)
loaded kexts:
com.aja.iokit.kona3 8.0 - last loaded 22387593921
de.novamedia.driver.NMSmartplugSCSIDevice 1.0.1
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.driver.AppleRAID 4.0.6
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 16 GB, SMC 1.25f4
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: pcif1d0,c0ff, sppci_video, Slot-2@3,12,0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
PCI Card: ATI Radeon HD 5770, ATY,HoolockParent, Slot-1
PCI Card: pcif1d0,c0ff, sppci_video, Slot-3@10,12,0
Serial ATA Device: WDC WD20EARS-00MVWB0, 1.82 TB
Serial ATA Device: WDC WD20EARS-00MVWB0, 1.82 TB
Serial ATA Device: WDC WD20EARS-00MVWB0, 1.82 TB
Serial ATA Device: WDC WD5002ABYS-01B1B0, 465.76 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000 / 2
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000 / 3
USB Device: Kensington Expert Mouse, 0x047d (Kensington), 0x1020, 0x1d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000 / 2
USB Device: HASP HL 3.21, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0x3d200000 / 2
FireWire Device: built-in_hub, Up to 800 Mb/sec
and here is my system software overview once I have booted into osx in safe mode.
System Software Overview:
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: System
Boot Mode: Safe
Computer Name: qdise’s MacPro3,1
User Name: q2dise (dty61)
Secure Virtual Memory: Not Enabled
64-bit Kernel and Extensions: No
Time since boot: 16 minutesThere's no point in reinstalling the same driver. It hasn't changed. It's incompatible with the OS update. Contact the device manufacturer to see if there's a driver update. In the meantime, you should physically remove the device so the driver doesn't load. If you uninstall the driver and leave the device installed, that might also cause a panic.
-
I cannot get my Mac Pro (Original) MacPro1,1 to boot with the 64 Bit kernel in 10.6.8
I cannot get my Mac Pro (Original) MacPro1,1 to boot with the 64 Bit kernel in 10.6.8 (this is a 2 x 3Dual-Core Intel Xeon machine).
Firmware = MP11.005C.B08 (EFI 1.2) 1.7f10 (SMC 1.1)
Will it not run the 64 bit kernel?
Is there a firmware upgrade to allow this?
Should I bother?
It won't boot with the Key 6 & 4 method.
or using Terminal command;
sudo systemsetup -setkernelbootarchitecture x86_64
Any suggestions?
Thanks in advance...
EricBecause it can't and doesn't have a 64-bit supported firmware.
UEFI (EFI64) was not finalized and adopted until very late 2007 and introduced in 2008, by Apple, Intel, other members of EFI Group and Unified EFI. The Mac Pro Mid-2010 was the first time though that 64-bit mode was the default.
Does it matter? not really. you can't install 48GB RAM anyway, while there are some improvements from 64-bit kernal.
Also can't boot Windows 7 64-bit DVD to install properly. But you can run Windows 64-bit kernel because you have a 64-bit Xeon.
Macs that use 64-bit kernel
64-bit kernel mode Snow Leopard
Booting with 32-bit or 64-bit kernel
Mac OS X- 64-bit kernel questions
http://macperformanceguide.com/SnowLeopard-64bit.html -
Booting from DW4.0 CD = Kernel Panic on my iMac G5, but not my Desktop DPG5
Hi,
I am having a problem. Very strange.
I tried to start up my iMac G5 using the internal SuperDrive booting from the Alsoft DiskWarrior CD that is the latest v4.0 and supposed to be compatible. Instead of booting, I get a panic screen. I photographed it if anyone could decipher it? Anyway, after 14 back and forth e-mails with Alsoft, the makers of Disk Warrior, and much extensive testing, we concluded...
1) their DW4.0 Boot CD should work but doesn't on the iMac G5
2) it's got to be the SuperDrive that is at fault.
I was able to use the same CD in my desktop G5 computer. I was able to burn a copy of it and boot from the copy also in my Desktop Mac.
When I try to boot from the iMac Superdrive - kernel panic and no go with all of these CDs.
What do I do now? I've got AppleCare on this computer?
Anyone have any ideas?
Thanks, and so long for now, TOMIf you can boot your computer using the OS X disc, then then chances are your computer itself is fine (good news!).
I'd lean on Alsoft a little more to send you a replacement. You have a defective product, and you have demonstrated that your computer's DVD drive is, in all likelihood, functioning properly. Call Alsoft, and if the assistant won't help you, ask to speak to someone senior, who hopefully knows their job a little better.
If you are in the U.K., you can draw attention to The Sale of Goods Act 1979 section 48b subsection 2 "If the buyer requires the seller to repair or replace the goods, the seller must a) repair or, as the case may be, replace the goods within a reasonable time but without causing significant inconvenience to the buyer; b) bear any necessary costs in doing so..." (Source: Blackstone's statue book on Contract, Tort & Restitution).
If not from the U.K., I'm sure a little digging will find something of similar use. -
I have put Arch on my USB and when it starts to boot, but I get the following error during the boot.
[73.100021] --[ end Kernel panic - not sycning: Fatal exception in interrupt
Last edited by TxRoot (2014-09-05 01:35:10)TxRoot wrote:
I have put Arch on my USB and when it starts to boot, but I get the following error during the boot.
[73.100021] --[ end Kernel panic - not sycning: Fatal exception in interrupt
how did you write the iso to the flashdrive? dd? have you tried another USB flash drive, redownloading the Arch iso? Or maybe even try a older iso? -
Kernel panic, followed by boot freeze?
I have a Mid 2012 rMBP. I recently installed OS X 10.10.3 and started noticing I had some issues with certain applications. No big deal, I just had to restart two or three times per day. Last night I had several successive kernel panics on boot up, caused by launchd. After booting into recovering, Disk Utility said my disk was fine, so I went ahead and selected the Reinstall OS X option. The first time I did this, it got all the way to the end of the install, and then told me it wasn't successful due to an unknown error with BSD.pkg. So I tried the reinstall again, this time it succeeded. However, now, I can't login! After inputting my password, the Mac either black screens and restarts, or the loading bar appears underneath the password field, it gets maybe 1/8 of the way, and then it stops. The cursor appears, but even after 45 minutes, the bar did not move any further. Anything I can do to try to fix this before I take it to the Apple Store tomorrow?
Can you boot into Safe Mode or do you have another Mac?
OS X: What is Safe Boot, Safe Mode? - Apple Support
If you have an SSD and used Trim Enabler, try resetting NVRAM (even if you don't use TE, it may help):
How to Reset NVRAM on your Mac - Apple Support -
Booting freeze when starting setup virtual console
Sometimes the computer will freeze when booting into
Started setup virtual console
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.5-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 10 07:10:15 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000376b0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000376b1000-0x00000000376b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000376b7000-0x00000000377b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000377ba000-0x000000003780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003780f000-0x0000000037907fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037908000-0x0000000037b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b0f000-0x0000000037b17fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b18000-0x0000000037b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b1f000-0x0000000037b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b63000-0x0000000037b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037b9f000-0x0000000037bdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037be0000-0x0000000037bfcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037bfd000-0x0000000037bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037c00000-0x0000000037dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000038000000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 2847A65/2847A65, BIOS 6JET85WW (1.43 ) 12/24/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37c00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 038000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask FC0000000 write-back
[ 0.000000] 3 base 037E00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f74c0-0x000f74cf] mapped at [c00f74c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x376b0fff]
[ 0.000000] [mem 0x37400000-0x376b0fff] page 4k
[ 0.000000] BRK [0x0179e000, 0x0179efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x376b7000-0x377b9fff]
[ 0.000000] [mem 0x376b7000-0x377b9fff] page 4k
[ 0.000000] RAMDISK: [mem 0x36ac0000-0x36dfcfff]
[ 0.000000] ACPI: RSDP 0x000F7190 000024 (v04 PTLTD )
[ 0.000000] ACPI: XSDT 0x37BF2BBD 000064 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: FACP 0x37BE4000 0000F4 (v03 LENOVO TP-6J 00001430 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x37BE5000 00A14B (v02 LENOVO TP-6J 00001430 INTL 20050624)
[ 0.000000] ACPI: FACS 0x37B9EFC0 000040
[ 0.000000] ACPI: HPET 0x37BFCEFC 000038 (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x37BFCF34 00003C (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x37BFCF70 000068 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x37BFCFD8 000028 (v01 LENOVO TP-6J 00001430 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x37BE3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE1000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377ba000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37bfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x376b0fff]
[ 0.000000] node 0: [mem 0x376b7000-0x377b9fff]
[ 0.000000] node 0: [mem 0x3780f000-0x37907fff]
[ 0.000000] node 0: [mem 0x37b0f000-0x37b17fff]
[ 0.000000] node 0: [mem 0x37b1f000-0x37b62fff]
[ 0.000000] node 0: [mem 0x37b9f000-0x37bdffff]
[ 0.000000] node 0: [mem 0x37bfd000-0x37bfffff]
[ 0.000000] On node 0 totalpages: 227548
[ 0.000000] free_area_init_node: node 0, pgdat c1601e00, node_mem_map f6fb9020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223156 pages, LIFO batch:31
[ 0.000000] HighMem zone: 9 pages used for memmap
[ 0.000000] HighMem zone: 394 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x38000000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x376b1000-0x376b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x377ba000-0x3780efff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7798000 s33856 r0 d23488 u57344
[ 0.000000] pcpu-alloc: s33856 r0 d23488 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225772
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3bfa8024-2f62-4818-9393-5874bfc69f25 rw
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 1826808 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037c00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 889132K/910192K available (4447K kernel code, 481K rwdata, 1288K rodata, 564K init, 956K bss, 21060K reserved, 1576K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1616000 - 0xc16a3000 ( 564 kB)
.data : 0xc14582aa - 0xc1614400 (1776 kB)
.text : 0xc1000000 - 0xc14582aa (4448 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.872 MHz processor
[ 0.003345] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.31 BogoMIPS (lpj=6982906)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003355] ACPI: Core revision 20140214
[ 0.019690] ACPI: All ACPI Tables successfully acquired
[ 0.020050] Security Framework initialized
[ 0.020059] Yama: becoming mindful.
[ 0.020075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020299] Initializing cgroup subsys memory
[ 0.020305] Initializing cgroup subsys devices
[ 0.020307] Initializing cgroup subsys freezer
[ 0.020309] Initializing cgroup subsys net_cls
[ 0.020313] Initializing cgroup subsys blkio
[ 0.020338] CPU: Physical Processor ID: 0
[ 0.020339] CPU: Processor Core ID: 0
[ 0.020342] mce: CPU supports 6 MCE banks
[ 0.020351] CPU0: Thermal monitoring enabled (TM1)
[ 0.020359] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.020459] Freeing SMP alternatives memory: 16K (c16a3000 - c16a7000)
[ 0.021230] ftrace: allocating 19105 entries in 38 pages
[ 0.026774] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061993] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3500 @ 2.10GHz (fam: 06, model: 17, stepping: 0a)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076738] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083404] CPU 1 irqstacks, hard=f6516000 soft=f6518000
[ 0.083406] x86: Booting SMP configuration:
[ 0.083408] .... node #0, CPUs: #1
[ 0.006666] Initializing CPU#1
[ 0.096574] x86: Booted up 1 node, 2 CPUs
[ 0.096579] smpboot: Total of 2 processors activated (8382.63 BogoMIPS)
[ 0.096809] devtmpfs: initialized
[ 0.096921] PM: Registering ACPI NVS region [mem 0x37b63000-0x37b9efff] (245760 bytes)
[ 0.097916] pinctrl core: initialized pinctrl subsystem
[ 0.097971] RTC time: 21:12:51, date: 07/24/14
[ 0.098030] NET: Registered protocol family 16
[ 0.098149] cpuidle: using governor ladder
[ 0.098151] cpuidle: using governor menu
[ 0.098199] ACPI: bus type PCI registered
[ 0.098202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098302] PCI: Using MMCONFIG for extended config space
[ 0.098303] PCI: Using configuration type 1 for base access
[ 0.098392] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.098393] mtrr: probably your BIOS does not setup all CPUs.
[ 0.098395] mtrr: corrected configuration.
[ 0.100073] ACPI: Added _OSI(Module Device)
[ 0.100073] ACPI: Added _OSI(Processor Device)
[ 0.100073] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100073] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107995] ACPI: SSDT 0x37B18620 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.108621] ACPI: Dynamic OEM Table Load:
[ 0.108624] ACPI: SSDT 0x00000000 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.116947] ACPI: SSDT 0x37B19F20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.117393] ACPI: Dynamic OEM Table Load:
[ 0.117395] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.130189] ACPI: Interpreter enabled
[ 0.130202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.130208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.130226] ACPI: (supports S0 S3 S4 S5)
[ 0.130228] ACPI: Using IOAPIC for interrupt routing
[ 0.130267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.144315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144322] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145146] PCI host bridge to bus 0000:00
[ 0.145151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145156] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145163] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145166] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145168] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.145181] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.145206] DMAR: Forcing write-buffer flush capability
[ 0.145208] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.145311] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.145327] pci 0000:00:02.0: reg 0x10: [mem 0xf2400000-0xf27fffff 64bit]
[ 0.145336] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145343] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.145462] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.145475] pci 0000:00:02.1: reg 0x10: [mem 0xf2100000-0xf21fffff 64bit]
[ 0.145642] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.145703] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
[ 0.145829] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.145893] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.145953] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
[ 0.146079] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.146141] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
[ 0.146201] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.146201] pci 0000:00:1a.7: reg 0x10: [mem 0xf2a04000-0xf2a043ff]
[ 0.146201] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.146201] pci 0000:00:1b.0: reg 0x10: [mem 0xf2a00000-0xf2a03fff 64bit]
[ 0.146201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
[ 0.146201] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
[ 0.146201] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.146201] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.146266] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.146294] pci 0000:00:1d.7: reg 0x10: [mem 0xf2a04400-0xf2a047ff]
[ 0.146416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.146489] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.146551] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.146682] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.146745] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.146992] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[ 0.147016] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.147028] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.147040] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.147053] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.147065] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
[ 0.147077] pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
[ 0.147093] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147095] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.147098] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.147100] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.147232] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.147255] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.147286] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.147516] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 0.147544] pci 0000:02:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[ 0.147763] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.147840] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 0.147866] pci 0000:02:00.2: reg 0x10: [mem 0xf2300400-0xf23004ff]
[ 0.148142] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 0.148168] pci 0000:02:00.3: reg 0x10: [mem 0xf2300800-0xf23008ff]
[ 0.148441] pci 0000:02:00.4: [197b:2384] type 00 class 0x088000
[ 0.148466] pci 0000:02:00.4: reg 0x10: [mem 0xf2300c00-0xf2300cff]
[ 0.156695] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.156703] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.156802] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.156907] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.157034] pci 0000:05:00.0: [10ec:8172] type 00 class 0x028000
[ 0.157059] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.157076] pci 0000:05:00.0: reg 0x14: [mem 0xf2200000-0xf2203fff]
[ 0.157243] pci 0000:05:00.0: supports D1 D2
[ 0.157245] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.157285] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.166686] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.166691] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.166697] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.166813] acpiphp: Slot [1] registered
[ 0.166820] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.166826] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.166831] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.166839] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.167015] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[ 0.167081] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.167195] pci 0000:08:00.0: reg 0x18: [mem 0xf2010000-0xf2010fff 64bit pref]
[ 0.167267] pci 0000:08:00.0: reg 0x20: [mem 0xf2000000-0xf200ffff 64bit pref]
[ 0.167309] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.167631] pci 0000:08:00.0: supports D1 D2
[ 0.167633] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167765] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.167881] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.167886] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.167897] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.168016] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.168030] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.168033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.168036] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.168038] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.168041] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.168043] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.168045] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.168116] pci_bus 0000:00: on NUMA node 0
[ 0.168358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.168494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168563] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.168695] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168761] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168827] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.173479] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.173591] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173669] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173669] vgaarb: loaded
[ 0.173669] vgaarb: bridge control possible 0000:00:02.0
[ 0.173669] PCI: Using ACPI for IRQ routing
[ 0.185061] PCI: pci_cache_line_size set to 64 bytes
[ 0.185173] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.185176] e820: reserve RAM buffer [mem 0x376b1000-0x37ffffff]
[ 0.185179] e820: reserve RAM buffer [mem 0x377ba000-0x37ffffff]
[ 0.185182] e820: reserve RAM buffer [mem 0x37908000-0x37ffffff]
[ 0.185184] e820: reserve RAM buffer [mem 0x37b18000-0x37ffffff]
[ 0.185187] e820: reserve RAM buffer [mem 0x37b63000-0x37ffffff]
[ 0.185189] e820: reserve RAM buffer [mem 0x37be0000-0x37ffffff]
[ 0.185191] e820: reserve RAM buffer [mem 0x37c00000-0x37ffffff]
[ 0.185330] NetLabel: Initializing
[ 0.185332] NetLabel: domain hash size = 128
[ 0.185334] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185348] NetLabel: unlabeled traffic allowed by default
[ 0.185378] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.185385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.185390] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.186692] Switched to clocksource hpet
[ 0.194447] pnp: PnP ACPI init
[ 0.194476] ACPI: bus type PNP registered
[ 0.194565] pnp 00:00: [dma 4]
[ 0.194604] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.194647] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.194818] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.194823] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.194877] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.194964] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.194967] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.194970] system 00:04: [io 0xffff] has been reserved
[ 0.194972] system 00:04: [io 0xffff] has been reserved
[ 0.194975] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.194978] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.194981] system 00:04: [io 0x1600-0x16fe] has been reserved
[ 0.194983] system 00:04: [io 0xfe00] has been reserved
[ 0.194986] system 00:04: [io 0x0700-0x070f] has been reserved
[ 0.194990] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195039] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195106] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.195153] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.195390] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195393] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.195396] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195399] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195402] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.195405] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195407] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.195411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195901] pnp: PnP ACPI: found 9 devices
[ 0.195903] ACPI: bus type PNP unregistered
[ 0.233524] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.233530] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.233542] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.233546] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.233549] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.233561] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.233564] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.233567] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.233579] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.233599] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 400000
[ 0.233618] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233621] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233624] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233627] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233630] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233632] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233635] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.233638] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233641] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233643] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233651] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233656] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.233660] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233664] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.233668] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233672] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233676] pci 0000:00:1c.5: BAR 14: assigned [mem 0x40c00000-0x410fffff]
[ 0.233680] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.233683] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.233687] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.233691] pci 0000:00:1f.3: BAR 0: assigned [mem 0x41100000-0x411000ff 64bit]
[ 0.233705] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.233709] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.233716] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233729] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.233732] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.233739] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.233744] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233752] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.233756] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.233763] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.233768] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233776] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.233779] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.233786] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.233791] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233799] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.233803] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.233809] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.233814] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233823] pci 0000:08:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
[ 0.233826] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.233830] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.233836] pci 0000:00:1c.5: bridge window [mem 0x40c00000-0x410fffff]
[ 0.233841] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233849] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.233864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.233867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.233870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233872] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233874] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233877] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233879] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233882] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.233884] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.233887] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233890] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.233892] pci_bus 0000:03: resource 1 [mem 0x40200000-0x403fffff]
[ 0.233895] pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233897] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.233900] pci_bus 0000:04: resource 1 [mem 0x40600000-0x407fffff]
[ 0.233902] pci_bus 0000:04: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233905] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.233907] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.233910] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233912] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.233915] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.233917] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233920] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.233922] pci_bus 0000:08: resource 1 [mem 0x40c00000-0x410fffff]
[ 0.233924] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233927] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.233929] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.233932] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233934] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233937] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233939] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233941] pci_bus 0000:09: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233974] NET: Registered protocol family 2
[ 0.234147] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.234165] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234196] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234229] TCP: reno registered
[ 0.234232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234288] NET: Registered protocol family 1
[ 0.234306] pci 0000:00:02.0: Boot video device
[ 0.247385] PCI: CLS 64 bytes, default 64
[ 0.247444] Unpacking initramfs...
[ 0.327321] Freeing initrd memory: 3316K (f6ac0000 - f6dfd000)
[ 0.327360] Simple Boot Flag at 0x36 set to 0x1
[ 0.327537] apm: BIOS not found.
[ 0.327589] Scanning for low memory corruption every 60 seconds
[ 0.328006] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342512] bounce pool size: 64 pages
[ 0.342526] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344771] zbud: loaded
[ 0.344889] VFS: Disk quotas dquot_6.5.2
[ 0.344943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.345132] msgmni has been set to 1740
[ 0.345203] Key type big_key registered
[ 0.345390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.345431] io scheduler noop registered
[ 0.345433] io scheduler deadline registered
[ 0.345477] io scheduler cfq registered (default)
[ 0.345722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.345914] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.346095] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.346276] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.346459] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.346643] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.346801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.346826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.346866] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.346868] vesafb: scrolling: redraw
[ 0.346870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.347265] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.371347] Console: switching to colour frame buffer device 128x48
[ 0.395282] fb0: VESA VGA frame buffer device
[ 0.395302] intel_idle: does not run on family 6 model 23
[ 0.395336] GHES: HEST is not enabled!
[ 0.395353] isapnp: Scanning for PnP cards...
[ 0.708652] isapnp: No Plug & Play device found
[ 0.708714] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.709479] rtc_cmos 00:05: RTC can wake from S4
[ 0.709659] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.709696] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.709734] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.709873] TCP: cubic registered
[ 0.710038] NET: Registered protocol family 10
[ 0.710291] NET: Registered protocol family 17
[ 0.710470] Using IPI No-Shortcut mode
[ 0.710614] registered taskstats version 1
[ 0.711361] Magic number: 6:207:248
[ 0.711441] rtc_cmos 00:05: setting system clock to 2014-07-24 21:12:51 UTC (1406236371)
[ 0.711573] PM: Hibernation image not present or could not be loaded.
[ 0.711816] Freeing unused kernel memory: 564K (c1616000 - c16a3000)
[ 0.711835] Write protecting the kernel text: 4452k
[ 0.711865] Write protecting the kernel read-only data: 1292k
[ 0.720349] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.722097] systemd-udevd[47]: starting version 215
[ 0.747046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.754102] ACPI: bus type USB registered
[ 0.754142] usbcore: registered new interface driver usbfs
[ 0.754158] usbcore: registered new interface driver hub
[ 0.757660] usbcore: registered new device driver usb
[ 0.757853] sdhci: Secure Digital Host Controller Interface driver
[ 0.757856] sdhci: Copyright(c) Pierre Ossman
[ 0.758255] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 20)
[ 0.758310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.758388] mmc0: no vqmmc regulator found
[ 0.758390] mmc0: no vmmc regulator found
[ 0.758524] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.758563] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 20)
[ 0.758628] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 0.758728] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.758864] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.758874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.758884] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.758909] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.759248] ehci-pci: EHCI PCI platform driver
[ 0.760108] hub 1-0:1.0: USB hub found
[ 0.760122] hub 1-0:1.0: 2 ports detected
[ 0.760528] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.760536] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.760554] ehci-pci 0000:00:1a.7: debug port 1
[ 0.760989] i8042: Detected active multiplexing controller, rev 1.1
[ 0.764322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.764416] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.764455] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.764469] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.764487] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2a04000
[ 0.764496] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.769729] SCSI subsystem initialized
[ 0.771540] libata version 3.00 loaded.
[ 0.773372] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.773646] hub 2-0:1.0: USB hub found
[ 0.773657] hub 2-0:1.0: 6 ports detected
[ 0.796797] hub 1-0:1.0: USB hub found
[ 0.796811] hub 1-0:1.0: 2 ports detected
[ 0.797077] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.797086] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.797104] ehci-pci 0000:00:1d.7: debug port 1
[ 0.801001] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.801026] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2a04400
[ 0.810017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.810266] hub 3-0:1.0: USB hub found
[ 0.810277] hub 3-0:1.0: 6 ports detected
[ 0.810637] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.810645] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.810654] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.810690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.810912] hub 4-0:1.0: USB hub found
[ 0.810922] hub 4-0:1.0: 2 ports detected
[ 0.811160] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.811169] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.811178] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.811202] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.811580] hub 5-0:1.0: USB hub found
[ 0.811590] hub 5-0:1.0: 2 ports detected
[ 0.811840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.811847] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.811857] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.811879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.812130] hub 6-0:1.0: USB hub found
[ 0.812140] hub 6-0:1.0: 2 ports detected
[ 0.812412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.812422] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.812431] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.812458] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.812718] hub 7-0:1.0: USB hub found
[ 0.812728] hub 7-0:1.0: 2 ports detected
[ 0.813015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.813023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.813033] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.813072] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.813371] hub 8-0:1.0: USB hub found
[ 0.813381] hub 8-0:1.0: 2 ports detected
[ 0.813569] ata_piix 0000:00:1f.2: version 2.13
[ 0.813680] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.816969] scsi0 : ata_piix
[ 0.817145] scsi1 : ata_piix
[ 0.817232] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 0.817238] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 0.842971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.116709] usb 3-6: new high-speed USB device number 2 using ehci-pci
[ 1.290069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.290196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.297007] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0A, SB31, max UDMA/100
[ 1.297157] ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133
[ 1.297160] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.310274] ata2.00: configured for UDMA/100
[ 1.310518] ata1.00: configured for UDMA/133
[ 1.310653] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5
[ 1.314042] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A0A SB31 PQ: 0 ANSI: 5
[ 1.330035] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 1.330632] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.330736] sd 0:0:0:0: [sda] Write Protect is off
[ 1.330740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.330778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339509] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.339512] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.339697] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.410766] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.411402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.330087] Switched to clocksource tsc
[ 2.977672] random: nonblocking pool is initialized
[ 4.813882] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.660514] systemd[1]: systemd 215 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 5.660690] systemd[1]: Detected architecture 'x86'.
[ 5.713519] systemd[1]: Set hostname to <Thinkpad-SL510>.
[ 7.304701] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.304780] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.304796] systemd[1]: Starting Remote File Systems.
[ 7.305131] systemd[1]: Reached target Remote File Systems.
[ 7.305165] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.305725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.305745] systemd[1]: Starting Encrypted Volumes.
[ 7.306028] systemd[1]: Reached target Encrypted Volumes.
[ 7.306050] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.306094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.306107] systemd[1]: Starting Paths.
[ 7.306343] systemd[1]: Reached target Paths.
[ 7.306360] systemd[1]: Expecting device dev-disk-by\x2duuid-0da676d3\x2de00d\x2d4408\x2da0e4\x2d61af4ccfed22.device...
[ 7.306889] systemd[1]: Expecting device dev-disk-by\x2duuid-37e41bc7\x2daf4c\x2d4c7f\x2d97ff\x2decc785cc6263.device...
[ 7.307389] systemd[1]: Expecting device dev-disk-by\x2duuid-6692aca0\x2d5948\x2d4835\x2dadb5\x2d51941a76128f.device...
[ 7.307887] systemd[1]: Expecting device dev-disk-by\x2duuid-8829a0cf\x2da620\x2d438d\x2d8d1a\x2de386af97280f.device...
[ 7.308384] systemd[1]: Starting Root Slice.
[ 7.315232] systemd[1]: Created slice Root Slice.
[ 7.315253] systemd[1]: Starting User and Session Slice.
[ 7.315767] systemd[1]: Created slice User and Session Slice.
[ 7.315784] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.316114] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.316130] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.316519] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.316536] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.316926] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.316943] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.317282] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.317297] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.317631] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.317651] systemd[1]: Starting udev Kernel Socket.
[ 7.317945] systemd[1]: Listening on udev Kernel Socket.
[ 7.317963] systemd[1]: Starting udev Control Socket.
[ 7.318263] systemd[1]: Listening on udev Control Socket.
[ 7.318284] systemd[1]: Starting Journal Socket.
[ 7.318577] systemd[1]: Listening on Journal Socket.
[ 7.318611] systemd[1]: Starting System Slice.
[ 7.319093] systemd[1]: Created slice System Slice.
[ 7.319121] systemd[1]: Started File System Check on Root Device.
[ 7.319134] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 7.319690] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.346175] systemd[1]: Mounting Temporary Directory...
[ 7.355475] systemd[1]: Starting system-getty.slice.
[ 7.356130] systemd[1]: Created slice system-getty.slice.
[ 7.405020] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.405060] systemd[1]: Starting Setup Virtual Console...
[ 7.434270] systemd[1]: Starting Load Kernel Modules...
[ 7.435152] systemd[1]: Mounting Huge Pages File System...
[ 7.450675] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.451757] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.452682] systemd[1]: Mounting Debug File System...
[ 7.453572] systemd[1]: Starting udev Coldplug all Devices...
[ 7.454542] systemd[1]: Starting Journal Service...
[ 7.455770] systemd[1]: Started Journal Service.
[ 8.017658] vboxdrv: Found 2 processor cores.
[ 8.017849] vboxdrv: fAsync=0 offMin=0x19a offMax=0x113a
[ 8.017936] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.017938] vboxdrv: Successfully loaded version 4.3.12_OSE (interface 0x001a0007).
[ 8.066565] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.453787] systemd-udevd[137]: starting version 215
[ 9.297221] Monitor-Mwait will be used to enter C-1 state
[ 9.297230] Monitor-Mwait will be used to enter C-2 state
[ 9.297235] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.297251] ACPI: acpi_idle registered with cpuidle
[ 9.297798] Switched to clocksource hpet
[ 9.397577] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 9.398331] ACPI: Lid Switch [LID]
[ 9.398442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 9.398448] ACPI: Power Button [PWRB]
[ 9.398520] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 9.398523] ACPI: Sleep Button [SLPB]
[ 9.398594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 9.398597] ACPI: Power Button [PWRF]
[ 9.714253] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.714258] ACPI: Thermal Zone [TZ00] (38 C)
[ 9.788226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.107244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.107258] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.107608] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[ 10.107894] r8169 0000:08:00.0 eth0: RTL8102e at 0xf8e0e000, 60:eb:69:df:fc:5b, XID 04c00000 IRQ 46
[ 10.138235] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.151012] Linux agpgart interface v0.103
[ 10.156788] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.156794] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.156797] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.156799] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.156801] sound hdaudioC0D0: inputs:
[ 10.156804] sound hdaudioC0D0: Mic=0x18
[ 10.156807] sound hdaudioC0D0: Internal Mic=0x12
[ 10.187737] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140214/utaddress-258)
[ 10.187746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187751] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187757] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187760] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187762] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.200980] ACPI: Battery Slot [BAT1] (battery present)
[ 10.307840] [drm] Initialized drm 1.1.0 20060810
[ 10.331834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 10.332165] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.332219] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.332274] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.346048] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 10.346167] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.346796] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 10.346977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.403254] ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 10.403262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.407145] ACPI: AC Adapter [ACAD] (on-line)
[ 10.407653] wmi: Mapper loaded
[ 10.462739] Non-volatile memory driver v1.3
[ 10.483086] cfg80211: Calling CRDA to update world regulatory domain
[ 10.511461] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 10.511465] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.511467] thinkpad_acpi: ThinkPad BIOS 6JET85WW (1.43 ), EC 6JHT66WW-1.186000
[ 10.511469] thinkpad_acpi: Lenovo ThinkPad SL510, model 2847A65
[ 10.513121] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 10.517198] thinkpad_acpi: radio switch found; radios are enabled
[ 10.517210] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.517319] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 10.517321] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 10.518287] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 10.617843] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 10.617954] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.640485] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
[ 10.717742] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 10.928161] media: Linux media interface: v0.10
[ 11.006082] iTCO_vendor_support: vendor-support=0
[ 11.008425] Linux video capture interface: v2.00
[ 11.015257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.015302] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.015485] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.050172] systemd-udevd[146]: renamed network interface eth0 to enp8s0
[ 11.084784] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 11.084877] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 11.401469] [drm] Memory usable by graphics device = 2048M
[ 11.401476] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 11.401478] fb: switching to inteldrmfb from VESA VGA
[ 11.401504] Console: switching to colour dummy device 80x25
[ 11.423441] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 11.423454] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.423456] [drm] Driver supports precise vblank timestamp query.
[ 11.423531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.474103] rtl8192se: FW Power Save off (module option)
[ 11.474191] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 11.539577] fbcon: inteldrmfb (fb0) is primary device
[ 11.568063] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 11.568068] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 11.625453] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
[ 11.649292] mousedev: PS/2 mouse device common for all mice
[ 11.819295] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:481c)
[ 11.832647] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.0/input/input19
[ 11.832785] usbcore: registered new interface driver uvcvideo
[ 11.832786] USB Video Class driver (1.1.1)
[ 11.900636] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.912613] systemd-udevd[144]: renamed network interface wlan0 to wlp5s0
[ 12.173403] Console: switching to colour frame buffer device 170x48
[ 12.178613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.178615] i915 0000:00:02.0: registered panic notifier
[ 12.191803] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.193501] acpi device:06: registered as cooling_device2
[ 12.193604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 12.193997] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.246859] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 13.644561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.954050] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.071585] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.166537] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 16.054096] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 16.358428] psmouse serio5: hgpk: ID: 10 00 64
[ 18.270058] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.588710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input18
[ 20.986088] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 20.997921] r8169 0000:08:00.0 enp8s0: link down
[ 20.997967] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 23.204726] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.231917] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.233796] wlp5s0: authenticated
[ 23.237347] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.241118] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.242837] wlp5s0: associated
[ 23.242852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.407416] wlp5s0: deauthenticating from 8c:21:0a:77:4c:32 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.443391] cfg80211: Calling CRDA for country: US
[ 23.443467] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.463399] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.465298] wlp5s0: authenticated
[ 23.466930] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.471099] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.472786] wlp5s0: associated
[ 391.317544] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 495.430421] perf interrupt took too long (2517 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 526.290766] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 646.953268] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 767.198414] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
Last edited by jazzi (2014-07-31 12:22:09)jazzi wrote:Sometimes the computer will freeze when booting into start virtual console.
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
You have to give us a hint.
What is your processor?
How much RAM have you?
What is your video card/ship set?
What kernel are you running?
I spotted this in your dump:
[drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
In this case, drm means Direct Rendering Management and has to do with your Video subsystem. An interrupt is where the hardware sends a signal to the processor that something has happened that requires the urgent attention of the processor. The kernel is protesting that the hardware is barraging it with interrupt requests. -
[SOLVED] Laptop freezes at startup after kernel upgrade to 3.13.6
Some days ago I got a new Dell Sputnik 3 Laptop and installed Arch Linux with UEFI Boot and gummiboot as bootloader. The installation was successful.
However two days ago there was an upgrade for the Linux Kernel from 3.13.5 to 3.13.6. When I restarted the Laptop after the upgrade of the kernel the Laptop freezed directly after pushing the power button (never got ahead of the initial DELL logo).
I ran the DELL hardware diagnostics to identify a possible damage of the SSD but everything was ok. Than I booted into a live system ad mounted the root partition and there was no problem work on it. Additionally I change the value of timeout in gummiboots loader.conf (it was commented out before). Since than I got the gummiboot boot menu at least. So narrowing down, I think something happened during the kernel upgrade. Unfortunately I have no clue what could it be since I am convinced that at the installation process some days before I did everything like it was described at the beginners guide so automatic gummiboot update had to be possible.
The drive is partitioned in the live system looks like this (look at sda):
├─sda1 8:1 0 512M 0 part /boot
└─sda2 8:2 0 235G 0 part /
fstab like this:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2
UUID=3f216fdb-f4c6-459a-856f-6f246d7a5bff / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=0F8F-2A3B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# swap
/swapfile none swap defaults 0 0
I have and arch.conf in gummiboot looking like this:
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux.img
options root=/dev/sda2 rw
and the loader.conf of gumiboot looking like this:
timeout 5
default 56cccedc29f1418ab2d8f1762ea09471-*
Now, I don't know anymore how to proceed to identify the problem and hopefully solve it
Last edited by cutuchiqueno (2014-03-11 21:47:32)looks like this issue might be the same:
https://bbs.archlinux.org/viewtopic.php?id=172961&p=1
If I find time I might try using an alternative to gummiboot to see if this works.
Update: There also seems to be a reopened bug report on this https://bugs.archlinux.org/task/33745
Last edited by Strawpants (2014-03-10 21:26:26) -
Fails to boot, freeze during start-up
I have been having the following problems: In past few months, while OS is running, the computer freezes, the screen image gets a smokey overlay color and a white text on black (approx 3x5") error message appears telling me that I must reboot.
Upon reboot the system generally seemed to run OK until it happened again.
More recently the computer is not booting up. Generally I get the gray apple logo screen with the spinning wheel, it spins 1-1/2 to 5 times and then freezes. I have removed the non-apple extra 512 RAM, I have reset the PRAM, I have pushed the reset button under the keyboard, I have reset the PMU; and lastly I have tried to boot off of the Apple Hardware Test CD and the original Apple OSX CD. When booting off the CD and holding down the "C" key either the disk ends up poping out without starting up or nothing happens and the CD remains dead in the drive. If it does start-up it seems to try to do so off the HDD, but continues to freeze at the apple screen. One out of 30 tries got a successful startup, but then it froze again when I opened my first application.
I don't know if it is related, but when plugged in, the back of the computer under the 8 9 keys seems to get excessively hot.I went to the Apple Genius today.
The computer would not start up
He plugged in an exterior firewire hard drive with it's own startup disk OS software
After several attemps at pushing the start button the computer started up
It did not show the internal hard disk icon
but with utility software it showed up on the hardware list,
The Genius ran a disk utility software, found that the disk needed directory repair
Did so along with an optimization and then the imternal hard disk icon showed up and a quick check indicated all my folders were intact.
We shut down the computer, disconnected the firewire drive and then tried to
Restart, nothing happening, no whirling or chimes or light from the monitor.
The keyboard caps lock and numlock lights worked
Tried to get the power button to function or the keyboard equivalent.
Even tried the voodo of plugging the firewire drive back in,
But it justs sits their quietly and dark.
We agreed that the logic board must be the problem.
What do you think?
Do you know whether you can upgrade to a higher speed processor or would you go for a new one? -
Macbook Boot Freeze after update 10.6.8
I have a macbook pro A1226 Late 2007 running OSX 10.6.4 it runs this just fine however when i update to 10.6.8 or install lion it will not boot up. Just a grey screen spinwheel then freeze with different colors. It works fine when i plug in external monitor. I just dont understand how it works perfectly fine on 10.6.4 but will not update. Any thoughts?
Try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Download and install Mac OS X 10.6.8 Update Combo v1.1. Now use Software Update to get all other updates for Snow Leopard. -
1 HFS volume needs repair -- can't boot from OS X Tiger "kernel panic"
I just searched the support discussions and did find an answer so hopefully someone can help me. Today I ran Disk Utility on both my G4 powerbook and G5 desktop. Both have Tiger 10.4.8 on them and have been running good. To my surprise both came back with a message saying:
1 HFS volume checked
Volume needs repair.
So I booted off my Tiger start up disk on the laptop first and went to utility and repair disk and all was good. The message came back that the volume was repaired.
When I tried to do the same thing on my G5 desktop my computer went to a gray screen and gave an error of “kernel panic” with a page long message. I shut the computer down and rebooted normally and all was fine. I then went back to disk utility and clicked on Verify Disk again to see what it said and here is what I got:
Verifying volume “MacOS250”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name_
Illegal name_
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume MacOS250 needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So i noticed that under:
Checking Catalog file.
Illegal name_
Illegal name_
came back twice. I have no idea what this means. At this point I tried to boot from DiskWarrior and the computer just sat in a state of limbo for an hour or so. I know DW can take some time but 1 hour was pushing my patients so I shut it down and rebooted normally and all was fine again except I still get the message above. I then methodically backed up all my docs, movies, photos etc to my second hard drive. I tried to boot again from Tiger and got the same “kernel panic” message. Can anyone help me?
Thanks,
Tim
G5 Mac OS X (10.4.8)
G5 Mac OS X (10.4.8)Maverick922 Before you erase, you might want to try and run fsck first even though it says you are using HFS+
http://docs.info.apple.com/article.html?artnum=106214
Another reason is your version of disk utility on the Tiger disk might may not match the newer version of 10.4.8 My Tiger start-up disk utility is 10.5 while the OS X version on my HD is 10.5.6.
The Finder along with other applications do not like you naming a file with a period in front of it. This turns it into a Unix dotfile and it then becomes hidden.Hence, illegal name.This may have been done by accident or with purpose.
And a little more to read up on, http://docs.info.apple.com/article.html?artnum=302672
If these don't help, sherry johnson's suggestion is probably the next step. -
Boot freezes on Apple logo no matter what I try
The problem began when I was playing a podcast. Things started locking up on the screen, and I was getting fragments windows while trying to back out and force quit. I was able to start up once more after that incident, but things froze again while playing music on iTunes. The music continued to play, but the screen and keyboard were locked up. Since then, I have not been able to boot past the white screen with the Apple logo. What I've tried:
1) Booting from OS cd (with original HDD, new HDD, and even no HDD). Still freezes.
2) Replacing upgraded RAM with the original RAM.
3) Reseting PRAM (commandoption+pr) Heard second chime, but problem persists.
4) Started while holding option (I get the choice of startup drive, and mouse works, but still freezes on logo)
5) Boot to a drive that has Windows installed (dual boot system). Get black screen.
6) Held power button for 5 seconds with cord unplugged
7) Unplugged all periphials.
8) Tried different monitor and keyboard
9) I can startup in verbose mode (command+V) and see info, but still freezes at logoI just got exactly the same problem with my MacPro (2009) last night, exactly the same errors Rich666 have. The oddest thing is that I can access trough my local network within a Mac G5 and see the entire hard drives with all its documents??!! this means, the computer is working, but the screen shows only the gray screen with the logo, but frozen.
I've tried reseting the P-Ram, The Apple Hardware test, Boot with shift pressed to make the system load in limited version and I can't boot from the dvd, nothing works, always the same, the grey screen with the logo.
Last night I ran the Apple Hardware Test and after finishes didn't show any error, I decided to do "hakuna matata" turn the computer off, and try again the next day, this morning, it worked!... for just a few minutes, I saw the finder, and when try to open a finder window, again the odd windows frozen, the screen turned like it was 16bits and crashed again, and right now is like last night, frozen screen, tried the same over and over, I still can see the damaged computer hard disks through the network, the computer sounds like the regular working sound, but the only I can see on its monitor is the gray logo frozen. Frustrating -
Oracle Linux 6.6 w/ UEK3 boots to EL 2.6 kernel
I have just installed Oracle Linux 6.6 with the UEK3 kernel. Everything is up-to-date and the 3.8.13-68.el6uek.x86_64 kernel is set as the default boot kernel, but the machine always boots to 2.6.32-504.12.2.el6.x86_64, which is the specified crash kernel. I don't know why the 3.8 kernel is failing.
How can I debug this?
Thanks,
Kory# cat /boot/grub/grub.conf
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Oracle Linux Server Unbreakable Enterprise Kernel (3.8.13-68.el6uek.x86_64)
root (hd0,0)
kernel /vmlinuz-3.8.13-68.el6uek.x86_64 ro root=/dev/mapper/vg_oracleapps-lv_root LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_DM rd_LVM_LV=vg_oracleapps/lv_root rd_LUKS_UUID=luks-39dab2f9-e3cb-4bee-8947-dc050c04d251 rd_LVM_LV=vg_oracleapps/lv_swap rhgb quiet numa=off transparent_hugepage=never
initrd /initramfs-3.8.13-68.el6uek.x86_64.img
title Oracle Linux Server Red Hat Compatible Kernel (2.6.32-504.12.2.el6.x86_64)
root (hd0,0)
kernel /vmlinuz-2.6.32-504.12.2.el6.x86_64 ro root=/dev/mapper/vg_oracleapps-lv_root LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_DM rd_LVM_LV=vg_oracleapps/lv_root rd_LUKS_UUID=luks-39dab2f9-e3cb-4bee-8947-dc050c04d251 rd_LVM_LV=vg_oracleapps/lv_swap rhgb quiet numa=off transparent_hugepage=never
initrd /initramfs-2.6.32-504.12.2.el6.x86_64.img
title Oracle Linux Server Unbreakable Enterprise Kernel (3.8.13-44.1.1.el6uek.x86_64)
root (hd0,0)
kernel /vmlinuz-3.8.13-44.1.1.el6uek.x86_64 ro root=/dev/mapper/vg_oracleapps-lv_root LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_DM rd_LVM_LV=vg_oracleapps/lv_root rd_LUKS_UUID=luks-39dab2f9-e3cb-4bee-8947-dc050c04d251 rd_LVM_LV=vg_oracleapps/lv_swap rhgb quiet numa=off transparent_hugepage=never
initrd /initramfs-3.8.13-44.1.1.el6uek.x86_64.img
title Oracle Linux Server Red Hat Compatible Kernel (2.6.32-504.el6.x86_64)
root (hd0,0)
kernel /vmlinuz-2.6.32-504.el6.x86_64 ro root=/dev/mapper/vg_oracleapps-lv_root LANG=en_US.UTF-8 rd_NO_MD console=hvc0 KEYTABLE=us SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_NO_DM rd_LVM_LV=vg_oracleapps/lv_root rd_LUKS_UUID=luks-39dab2f9-e3cb-4bee-8947-dc050c04d251 rd_LVM_LV=vg_oracleapps/lv_swap rhgb quiet numa=off transparent_hugepage=never
initrd /initramfs-2.6.32-504.el6.x86_64.img -
Unable to boot the sytem after applying kernel patch 118844-27
We have an hp ProLiant DL380 Storage server connected to HP StorageWorks Moduler Smart Array 30 via SCSI. Solaris 03/05 was installed previously on this system with kernel 118844-20. When I queried and installed all required patches with 'smpatch add -i .. ' command, all patches applied and the system is rebooted. After reboot, the system kept restarting. I followed the instructions on Sun Alert document 102087, and installed grub using 01/06 1st CDROM. It installed successfully, but problem persisted. The systems started booting, but before printing 'Configuring devices' the system rebooted again. Providing -v option to the kernel, it lastly printed a PCI device id (/pci@....) and after 2-3 seconds rebooted again.
Finally I had to reinstall the solaris (this time 01/06). The disk was accessible after booting with CD ROM, and I was able to get cylinder numbers of disk, and I installed the new system to the root partition of the other live upgrade environment. The boot disk was partitioned under linux, it was three partitions, Solaris2 (50GB),Solaris(4GB),Linux(18GB). Installation medium told that the fdisk partition was invalid, and i repartitioned the whole disk again.
System up and running Solaris 10 01/06 now, but the strange thing is that, previously hard disk (both boot disk and disks on array) locations were identified as '/dev/rdsk/c0tx' but now, the system sees that hard disks at '/dev/c1tx' and CDROM at '/dev/c0t0'.
Now I want to ask tow questions:
* Could this disk number change made the system unbootable previously?
* May I safely apply patch 118844-28 to the system
-ThanksHere's a similar topic https://bbs.archlinux.org/viewtopic.php?pid=536210 also if that doesn't work you should install vesa as it also says it's not found in your log.
Maybe you are looking for
-
Importing entire project into DTR
Hello All, I need to put my project into DTR. Can i import my entire project into DTR inspite of doing it file by file. Thanks & Regards Abhivyakti
-
PROMPT WITH DEFAULT VALUES DOES NOT DISPLAY VALUES THE FIRST TIME
Hi, With one of our scorecard reports, when you select a division, the leader role/leader prompt picklist values do not get populated the first time. Because this is only happening in reports we have written in house, we do not see this happening to
-
How to transfer photos from my PC to ipad air
how to transfer photos from windows pc to ipad air?
-
Having issues when running program RPURMA00
Hi there, We have two different instances for SAP HR and SAP FI. We don't effect payment from HR instance. So need to run this program prior to archiving and does not work. Your help on this is greatly appreciated. Thanks, Gajanan
-
Excessive CPU usage by DirectoryService
My black MacBook (2.2GHz Intel Core 2 Duo) fans are always on and it drives us mad. The culprit is the DirectoryService demon owned by root which is always running at about 60% CPU. I have written a loop script which kills it off every 4 four seconds