Boot from Raid-hdd with a controller card installed?

Hi,
I have a problem. I've just intalled a Windows 2000 my HDD3 (IDE-raid) and everthing went well. I've put the 1st boot option to SCSI and it boots normal. But when I add a hdd to my controller card (Promise Ultra100) it doesn't boot the raid, instead, it tries to boot from the hdd on the controller-card. I've just got this card, and had a KT3-Ultra ARU before. There I could change between "Ultra-0, Ultra-1, Raid-0 and Raid-1 etc. etc." in the bios, where Ultra stands is the Controller card and Raid in the onboard raid. So, why can't I do this on this, newer card? Any1 know how to work around it or how to fix it?
This is what I have:
IDE1:
Master: Western 180GB
Slaev: Maxtor 250GB
IDE2:
Master: NEC 1300A
Slave: Lite-on-it 40125W
IDE3 (Raid):
Master: Maxtor 80GB
Slave: Maxtor 80GB
Controller card IDE4:
Master: Western 250GB
Slave: Western 250GB
Controller card IDE5:
Master: Western 200GB
Slave: Seagate 30Gb
Controller card = Promise Ultra100
And yes, I have the modded version of the bios couse I wanted to have a real raid on my IDE-drives. How can it even be raid if it's only one drive? But that doesn't really matter, couse the boot-options are the same as before.

Hi, I did as u said and bought a new controller card (Titan Electronics Inc. Ultra ATA/133 IDE). But it didn't help, it's the same as with the older Promise card.
This is what happenes:
When I add a hdd to the controller card it finds the hdd and such. Everything works normal untill the os-boot-process begins. Because there is only one alternative called "SCSI" in the bios, where u chose where to boot from it thinks it should boot from the controller card (cause it is a kind of SCSI-card). But I want it to boot from the raided-drivers on the onboard raid (whitch also is a kind of SCSI-card). The thing is that it mixes them up, and only tries to boot from the controller card i've installed, and ignores the raided-drivers. When I had my Kt3 Ultra-aru I could chose between booting from:
IDE0
IDE1
IDE2
IDE3
CDRom
Raid0
Raid1
(this options only showed up when I had my Promise ULTRA controller installed on it)
ULTRA0
ULTRA1
ULTRA2
ULTRA3
But with this, newer and more expensive card, I can only chose SCSI in the boot sequnce.
Any idea how to fix that? Maybe to mail to the MSI so they fast can added that choice to the BIOS in an update?
Would be thankfull for any help possible

Similar Messages

Late 2012 Mini won't boot from ext HDD with 10.8

Having just replaced an early 2009 Mini with a later 2012 mini, I tried booting off an external HDD that is a backup with Mountain Lion 10.8 as the OS. I selected it to be the boot drive after holding down the option key, but the boot process never went beyond the white screen/Apple logo, even after waiting for minutes.
The external drive is in a Newer 3.5" enclosure with a FW800 port connected to the Mini via a FW800 cable. After booting from the internal drive I can view and change items in the 10.8 external drive. This drive previously booted fine from my old Mini.
[Note: This is not related to my earlier "Snow Leo won't boot" question.]
Thanks

The problem is the version on the external drive, if created
on the old Mini (infered from ""This drive previously booted
fine from my old Mini.") won't boot on the new Mini because
it lacks drivers that are not available on the general Mountain Lion
updates. Since the new Mini came out after 10.8.2, only the
version on it contains the proper drivers. Also, if the version
on the external drive is earlier than 10.8.2, it will never boot
as no Mac can boot to an OS older than it was shipped with.
Whenever 10.8.3 comes out, it will likely sync all current models again.

UCS C260M2: How to boot from local hdd (RAID) ?

Hi all,
i just integrated a C260 to UCS Manager. (converted from standalone to UCSM)
Then i tried to push a serviceprofile on it
-> got config error "Local disk config destructive to current storage There are not enough resources overall"
Thats okay because after that I was told that there was an image installed on the C260M2 in standalone mode.
So now I tried to boot the server from the installed image, but I can not boot from the local disks.
It always boots the UCS-SCU (Server Configuration Utility)
I tried watched for any solutions so I disabled all the boot options in the BIOS, now I get the error "no boot device found"
Unfortunately I can not find any boot option to boot from local disks.
I can see following RAID Configuration in "inventory > rack mounts > servers > server 1 > Inventory > Storage
The 16 Disks (10 SAS and 6 SSD) are controlled via 2 RAID Controllers, each one controlls 8 Disks (5 SAS and 3 SSD) in RAID 0 striped.
- Is there a way to boot from the local HDD with the standalone mode installed image ?
https://supportforums.cisco.com/message/3810051#3810051 does not work, because of no internal RAID Controllers, both are PCIe Raid Controllers.
- Have I lost my preinstalled image, as I converted from standalone to UCSM integraded ?
Best regards
Alois

Hello Alois,
First of all, rack server can have only one RAID controller when it is managed by UCSM.
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011110.html#d180135e3777a1635
------------ snip --------------
Maximum of One RAID Volume and One RAID Controller in Integrated Rack-Mount Servers
A rack-mount server that has been integrated with Cisco UCS Manager can have a maximum of one RAID volume irrespective of how many hard drives are present on the server.
All the local hard drives in an integrated rack-mount server must be connected to only one RAID Controller. Integration with Cisco UCS Manager does not support the connection of local hard drives to multiple RAID Controllers in a single rack-mount server. We therefore recommend that you request a single RAID Controller configuration when you order rack-mount servers to be integrated with Cisco UCS Manager.
In addition, do not use third party tools to create multiple RAID LUNs on rack-mount servers. Cisco UCS Manager does not support that configuration.
I hope service profile association has failed without making any changes to RAID configuration and it is currently operating as standalone rack server.
If yes, check if you have Flexflash card installed and SCU partition is enabled. If yes, you can disable it.
Are the two RAID controllers listed in boot order menu ?
Is RAID array ( virtual drive ) is in boot list ?
Padma

Sun Fire T2000 boot from RAID

hi,
Sun Fire T2000, firmware 6.1.12
LSI 1064E firmware 1.0.40
hardware RAID for internal disks
sometimes server boots with trap, if :
it boots from raid and you tring to break and boot from cdrom:
{0} ok boot cdrom
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Redirected to slice: 1
Loading: /platform/SUNW,Sun-Fire-T200/ufsboot
Loading: /platform/sun4u/ufsboot
ERROR: /pci@780/pci@0/pci@9/scsi@0: Last Trap: Fast Instruction Access MMU Miss
[Exception handlers interrupted, please file a bug]
[type 'resume' to attempt a normal recovery]
{0} ok boot cdrom
SC Alert: Host System has Reset
SC Alert: Host system has shut down.

Worked for me .
( T2000 trying to boot from the net )
{0} ok boot net -s
Boot device: /pci@780/pci@0/pci@1/network@0 File and args: -s
100 Mbps full duplex Link up
Requesting Internet Address for 0:3:ba:d9:39:2c
Requesting Internet Address for 0:3:ba:d9:39:2c
ERROR: /pci@780/pci@0/pci@9/scsi@0: Last Trap: Fast Instruction Access MMU Miss
[Exception handlers interrupted, please file a bug]
[type 'resume' to attempt a normal recovery]
{0} ok printenv auto-boot? false
{0} ok reset-all
SC Alert: Host System has Reset
SC Alert: Host system has shut down.
Sun Fire T200, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.20.4, 32760 MB memory available, Serial #64567596.
Ethernet address 0:3:ba:d9:39:2c, Host ID: 83d9392c.
{0} ok boot net -s
Boot device: /pci@780/pci@0/pci@1/network@0 File and args: -s
100 Mbps full duplex Link up
Requesting Internet Address for 0:3:ba:d9:39:2c
Requesting Internet Address for 0:3:ba:d9:39:2c
100 Mbps full duplex Link up
SunOS Release 5.10 Version Generic_118822-25 64-bit
Then came up ok .
Thanks

Mobo Support for booting from USB hdd

Hi,
I have a K8N Diamond.
How can I check whether my mobo can support booting from USB hdd?
I know it can boot from the USB-CDROM.
If not, do I need a bios update?

Quote from: Stu on 21-January-08, 00:38:45
How to identify your BIOS and m/b version
But please don't go flashing your BIOS just for the sake of doing so.
Your USB HDD will be listed under Hard Disks in BIOS, there won't be a USB-HDD option
Wow, thanks for the link and the pointer. I've found out where the USB hdd is now.
I won't flash my bios for the sake of that thanks to you, but I'm upgrading to a Dual-Core soon and I realised my bios is w7100nms v1.0.
So I have to flash my bios soon. Any tips regarding this?

IMac won't boot from any HDD or install disc

Hi everybody.
This morning my iMac just didn't wanna boot up, it powers on and the start sound plays but nothing more, all white screen.
Tried holding OPT at start, my mouse cursor becomes visible and active but none of my startup drives show. Also tried booting from both SL and leopard install DVD, it reads the disc for a minute or two then spits it out, nothing on the screen, all white.
Tried resetting PRAM, holding down CMDOPT+PR, it reboots but same thing after that.
My internal HDD crashed recently so I've been booting from my external drive which has SL installed. This has worked fine unitl now, last night I shut the machine down it did take an extra two minutes to power off which was out of the ordinary.
All help appreciated which can avoid me from sending it in for repair.

Thanks for the reply.
Since my internal drive had been failing I guessed it had to be the culprit and right I was. After I swapped the HDD (plus swiped the interior clean) my iMac was like new again plus I didn't have to send it away.
But what I can't quite understand is why a bad internal drive which was not in use would hinder the mac from booting from the install DVD all of a sudden.

Does hp dc7900 support booting from 3tb hdd?

does hp dc7900 minitower support booting from 3tb hdd?

Hi:
Probably not.
In order to be able to boot from a 3 TB HDD, you need:
1. A UEFI BIOS, which I do not believe the dc7900 has.
There is a picture (see page 5 at the link below) of the HP splash screen for an HP business desktop that has a UEFI BIOS. If your HP splash screen doesn't look like the one in the picture, then you will not be able to boot from a 3 TB HDD.
2. A GPT-formatted hard drive.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02826744/c02826744.pdf
Paul

No BIOS support for USB? Cannot boot from USB HDD

Hi,
I was attempting to install a couple of operating systems (Linux, Windows Vista CTPs) on my external hard disk (USB 2.0, Firewire). And I cannot seem to - because there does not seem to be any way to specify USB device support in your boot sequence. It seems the BIOS configuration is limited to these 5 basic icons (no text underneath to even let you know what they stand for) - which seem to stand for HDD, CD/DVD, network, etc, but no USB hard drives (I don't believe FDD counts)?
Windows Vista's installation for example complains that the BIOS does not support booting off my external hard disk - as does linux.
Or am I missing something . . . ?
Regards,
-krish

Hi Krish
As far as I know it is not possible to boot from external HDD. If you want to install more different operating systems you can do it directly on the notebook HDD or even install them as virtual machine. I use VMware Workstation and I have install two different operating systems there (W2K and Linux).

P67a-GD80 won't boot from USB HDD

Trying to boot from a bootable thumb drive.
I've got the bios checked to boot from USB HDD first.
Still boots from HDD.
When I disable second & third boot devices (hdd & cd-rom), I get the message "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key".
Ideas?

Quote from: JLio01 on 28-October-14, 16:39:07
Mine is like "USB Key: *My thumb drive name"
Do you have a GD80?

Mac Pro will not boot from Leopard or any CD or DVD install disk

My Mac Pro wont boot from my Leopard install DVD. It never gets by the gray screen, then after several minutes the screen scrolls down black and says I need to restart my computer. I tried my Tiger install disk and it still wont boot from that DVD. Held down the "C", used "option" and selected DVD and still no boot. I can boot from one HD that has Leopard 10.5.8, but another HD with Snow Leopard 10.6.3 will not boot. The HD with Snow Leopard shows up as "EFI Boot" not the name I gave that HD when I startup using the "option" key. Any help would be appreciated.

At first I was just going to say it sounds like you have a bad optical drive, but then you had to go and say that it also won't boot from a HDD.
That just makes things a whole lot worse.
Start by removing the side cover and checking the RAM to see if any of the LEDs are lit up indicating bad RAM. Usually if there's any bad RAM found, it will just automatically disable that stick, but maybe yours isn't for some reason.
Look for any other LEDs that may be lit. Generally speaking, the only time you should see an LED (outside of the power LED) lit consistently is if there's a problem.
You should also see if you can get Apple Hardware Test to run, which may or may not find some problem.
But sorry to say, it's sounding very suspiciously like a bad logic board.
One other thing to try, is putting the SL drive into a different slot. So if you were putting it in slot 2, try slot 3 or 4. If you just have a bad SATA port, you might be able to just work around that until you get a new system.
If by chance this system is still under warranty, do not walk, do not pass go, do not collect $200, RUN to the nearest AASP or Apple store to make it THEIR problem to sort out.

How can I set to boot from MAC OS by default after I installed Windows?

How can I choose to boot from MAC OS by default after I installed Windows? I have a MacBook Pro Leo 10.6.8. I used bootcamp to install Windows XP SP2, but now if I don't press the option key it will start up with Windows, and I don't want that. Thanks for any help.

Select it in the Startup Disk pane of System Preferences.
(61137)

Mac Pro with no airport card installed

I have a Mac Pro with no airport card installed....Can I just purchase an Airport express and connect by ethernet to the Mac pro.... I use Air port Extreme as my router for other computers

Yes, this is referred to as a ProxySTA in the business.
HOWEVER, this only became available with the 802.11n Express. I haven't yet seen it OFFICIAL if the new second generation still supports ProxySTA. I'm a bit hesitant to say yes, because the new express leans a little closer to the Extremes which work quite differently. (haven't had time to test this yet myself)
I'm curious, why you don't just run an ethernet from your extreme to your Pro... I'm guessing because of the distance?

Problems booting from onboard SATA with PCI SATA controller installed

I have a K7N2 Delta-ILSR motherboard (BIOS v 7.8), and my Windows XP installation is on a single drive attached to the onboard Promise 378 SATA RAID controller. I have a PCI Promise TX2200 SATA RAID controller installed, currently in PCI slot 5. The OS boots normally off the onboard controller if I do not have my RAID0 array attached to the PCI controller, but I get disk boot failure messages if I have the RAID0 attached to the Promise TX2200.
I have tried putting the PCI controller in different slots to change IRQ channel routing, tried changing boot order in the BIOS, and even tried assigning specific IRQ priorities to the slot with the Promise TX2200.
My basic question is this: how do I get this motherboard to boot from the onboard controller while I have my RAID0 attached to the add-on PCI controller?

Well, Promise got back to me. They were insightful enough to tell me what I already knew and that they didn't support what I was trying to do:
Quote
Case Problem: I have an MSI K7N2 Delta-ILSR Socket A motherboard with an onboard Promise FastTrack 376 SATA RAID controller. I wish to continue booting my OS from a single SATA drive on this controller, while using a RAID0 array on my FastTrack TX2200 controller. When the TX2200 is installed and the array is attached, it is detected as C: by the motherboard BIOS and the active boot drive as D:. The TX2200 is detected during boot (after POST) first, the onboard contoller second. I have tested the TX2200 in...
Case Solution: Hi Sorry for the late reply. Are you by any chance running both the FT 376 embedded controller along with the FT TX2200 if so than you will run into bios or driver conflict when both controllers in the system. Promise only recommend and support one cards pre system. Thank you.
... and MSI
Quote
Thank you for contacting MSI Technical Support.
As onboard SATA controller and PCI controller are both promise. It exits compatibility between them. You could try the following procedures to check if they could solve the issue:
1. Please contact the PCI card vendor to ask if there is relative firmware update
2. Please disable all the onboard devices which you don't want to use in bios setup.
3. You could try different MB bios version to have a check. You could download these versions from here.
Please feel free to let us know if you still have any further issues or inquiries
So that leaves me 3... downgrading my BIOS is not worth the risk just to make this work. Looks like its time for a full migration plan so this issue becomes moot.

XServe G5 unable to boot from raid 5 partition (Apple PCI raid card)

I've installed Leopard Server on a raid 5 partition, on a XServe G5 with an Apple PCI raid card, but I can't boot from that partition.
This server was running on 10.3 server with the same partition since 4 years and they where no problem.
Somebody have a suggestion ?
Spec : write cache off, readahead off, iopolicy direct / 3 hard drives Apple 80GB

Post to the appropriate forum under Server Products.

Mac Pro Won't Boot from any HDD

My system:
2008 8-core Mac Pro running 10.6.8 Snow Leopard
4 HDDs installed, 2 of them are a striped RAID 0 that is the bootup volume, a couble of external hard drives (1 of them a bootable clone), a DVI display
backed up with Time Machine; thanks for the concern.
Problem:
I came home one day, and my computer was acting funny. It was fine earlier in the day. Time Machine had failed a backup, an AFP mount had unmounted with an error, Dropbox was trying to sync but couldn't because of bad access permissions for a file, and Terminal wouldn't open, giving me a message about an invalid shell. I restarted, and it failed to restart, so I turned it off. I thought it was a corrupt filesystem (and striping is unstable, so it would make sense), but no, no other bootable disks worked.
Boot chime plays, grey screen comes up with Apple logo, wheel spins forever.
ATI graphics card fan runs pretty fast after a minute or so.
Light is solid, not blinking to indicate a RAM problem.
What I've tried:
Googled the problem. Got results about MacBook Pros. Did "-MacBook" in the search. Got similar questions but no solutions for my Mac.
Tried booting from an install DVD and the clone. Same thing happened.
Reset the PRAM (twice). No effect.
Reset the SMC (twice). No effect.
Unplugged the monitor. Graphics card fan wasn't loud, but the computer still wouldn't boot.
Unplugged all USB and FireWire devices. No effect.
Left the computer unplugged for an hour, which also resets the SMC. Who knows, this sometimes works! It didn't.
Any ideas?

Booting in Safe Mode did not help, but it did show a grey circle with a cross through it instead of an Apple logo like before.
I remembered that there's an Apple Hardware Test (a bit hard to figure out how to do on your specific machine ), and I booted into it. Before I even ran the test, it told me that there is an error. The error message was just the name of one of my RAM slots. So... a piece of RAM might be dead. I ran the extended test, and it was halfway through after 30 minutes, but I stopped it because I don't have enough time. I have to continue this tomorrow.
As for the GPU, its fans might just be running because the system runs them at a high level by default when it's in certain states. I know older Macs did this in Target Disk Mode with every fan, and the GPU fan was running during the AHT too. At least I hope this is the case. Right now, it seems beyond a hard drive problem. Maybe booting from a DVD works because it only uses 1 RAM slot or something. I'd much rather have a piece of inexpensive RAM be dead than my GPU, and besides, I've kinda wanted to upgrade the RAM anyway.

Boot from Raid-hdd with a controller card installed?

Similar Messages

Maybe you are looking for