Boot into safe mode and touschscreen doesn't work.

Hey, so, I ran a program that would reboot my Toshiba Encore into Safe Mode and in Safe Mode the touchscreen is non-functional. Whenever I try to shut down the Encore and turn it back on, it always goes back into Safe Mode and I can't do anything.
Please help!
Thanks,
M260.

MASTER260 wrote:
All I have is a the Microsoft Wedge Keyboard, and my laptop's touchpad/keyboard via Synergy.
Ooh. That is a bluetooth device is it ? I suspect the tablet does not have a bluetooth driver in safemode.
If not, you should follow Padgett's suggestion.
If you do not have one, pop in to a phone shop and get an OTG cable. Then visit your neighbours and ask if you can borrow a USB keyboard and / or mouse for 15 minutes. Even if you can only find a USB mouse, you can open a file explorer, find your way to C:\Windows\System32, click on msconfig and you will be back in business in minutes.

Similar Messages

When turning on my imac, it loads to a blue screen with a turning wheel and never gets passed that. I have tried booting to safe mode and it still doens't work.

When turning on my imac, it loads to a blue screen with a spinning wheel. It never gets passed that screen. I have tried power up to safe mode and it still doesn't work. I have music files saved on the computer and I don't want to lose any of my files. Can someone help me?

Zap the PRAM and Reset the SMC, and see if that fixes it. BTW. detailed computer and OS info goes a long way to solving problems.

10.9.4 Boots Into Safe Mode

Every other boot, my MacMini4,1 boots into Safe Mode.
I tried Command+Option+P+R for two chimes but it continues to do this. Most posts are asking how to boot into Safe Mode and I'm looking for what is causing mine.
What should I try next?

Searched for "Safe" and this is where it started:
1/09/2014 6:33:44.000 am kernel[0]: SAFE BOOT DETECTED - only valid OSBundleRequired kexts will be loaded.
1/09/2014 6:33:44.000 am kernel[0]: calling mpo_policy_init for TMSafetyNet
1/09/2014 6:33:44.000 am kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
1/09/2014 6:33:44.000 am kernel[0]: ucode: no updates in safe mode
Then it lists the items: "can't load..."
Is there something else I should search for?

Did booting into Safe Mode "fix" hang-on-startup?

Yesterday my Mac Pro would hang on a blue screen every time tried to start. After booting into Safe Mode and repairing permissions (as suggested on this forum) everything seems fine. I'm wondering if Safe Mode has fixed this problem or if this was an early warning to drive failure or some other OS corruption. Is there anything else I can/should do to insure this does not happen again or to check the drive's stability?
Thanks!

Great! According to the info on that page, this issue was likely fixed by booting into Safe Mode. It says:
Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.
Thanks so much!

Wifi goes on and off, backlit keyboard doesn't work and no sound since Lion upgrade. I can get the wifi back by going into safe mode and re booting(someone suggested on here), but can't let computer die or turn off or have to do it again.

My Wifi connection goes off if computer dies or shuts off, I can only make it work if I go into safe mode and reboot, it was just that, but now my keyboard doesn't light up like it's supposed to in low or no light and in system preferences it's like it doesn't exist. Also, the sound doesn't work, I can't turn it up or down, it shows the sound icon grayed out and the anti symbol when I push F11 and F12, also it's like it doesn't exist in system preferences either. I have never had any problems with my MB Pro, I purchased in Feb. 2010. , but I upgraded to Lion last month, I haven't been using my laptop as much since I had an Ipad I given to me, so I think that's why I didn't notice these issues right away. What do I do? HELP!! Do I take it to Apple? I don't have the Apple care warranty, so will it be expensive for them to fix? Can I get my money back for Lion if I restore to Snow Leopard?

Take it to an Apple store or AASP. How much it will cost will depend on their determination of the problems. To bad you didn't purchase extended AppleCare. No you don't get your money back for purchasing Lion.

My macbook pro automatically goes into safe mode and doesn't start. I use mavericks. what to do? ?

my macbook pro automatically goes into safe mode and doesn't start. I use mavericks. What to do??

Can you boot into your Recovery partition (hold down the command and R keys whilst booting)?
Call back - you'll be able to connect to this forum from Safari whilst in Recovery.
Clinton

Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

Hello to you all,
My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
Please, should you have any solution please send me the details to [email protected]
Thanks you a millionh times.
Al.

The MBA seems to cause several problems to several users on boot ups
On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

Can I ssh to a Mac that's booted into Safe Mode?

I'm needing to ssh to a Mac that's been booted into Safe Mode (I'm already able to ssh to it in normal boot mode, and I know how to boot it into Safe Mode from the command line, i.e. sudo nvram boot-args="-x", then sudo reboot).
I can't just test this for myself, as it has to work first time, otherwise I'll be locked out of the remote Mac. If ssh would still work in Safe Mode, the plan is to then ssh to it and issue the command to set it back to normal boot mode (with sudo nvram boot-args="") and then reboot... job done.
Ideally, but not too important, I could VNC to it in Safe Mode instead, but ssh would do fine.
Does anyone know (for sure!) please?
In case anyone wondered, I'm wanting to do the Safe Boot because I'm told it can cure an issue with Adobe CS apps freaking out and locking up, crashing etc. I want to try this over the w/e, and have no physical access to the Mac. I've already set it to power on later (via pmset) - something I do routinely.
I thought an answer to this would be easy to find, but after Googling I've drawn a blank. Can't find it in any Apple docs either.
Thanks in advance!

If this was already covered somewhere else, I
apologize. I did some browsing for this topic but had
no luck finding anything...
Anyhoo, I'm trying to log in to my wife's B&W G3
(running Jaguar) from my G4 (running 10.4.2) using
secure shell but she doesn't have a password set up
on her computer. When I enter the ssh command in
Terminal, it asks for a password — I don't enter
anything and just hit the Return key. It returns with
a massage saying "Permission denied, please try
again." What can I do to log in w/o setting up her
machine with a password first?
If you want to use SSH securily I would suggest you disable password authenticaiton altogher. If you setup public key authentication it is more secure and better than using passwords anyway.
see how to setup ssh with public keys

Intel Mini will only boot into safe mode - hangs on ANY Mac OS volume

I have an Intel Mac Mini... the core2duo 1.83GHz or whatever.
I acquired it from it's previous owner, as it was "broken".
He could not get it to run an install disc.
It will not boot any of the Mac OS install media (DVD or CD - 10.4, 10.5, 10.6).
It will not boot/install a Linux disc (I haven't tried, but that's what I was told).
It WILL boot/install Windows !?!?
So... anyway, I removed the HDD, and installed OS 10.6 Leopard on it (FW Target mode installs kept failing at the end - regular retail DVD). I then reinstalled the HDD back into the machine.
The system keeps hanging at the same point it would when trying to boot an install DVD - after the screen turns blue, it goes back to the gray screen, then immediately freezes.
However, I eventually discovered that it WILL boot into safe mode !
Everyone kept saying it's the logic board failure, but if it boots into safe mode, can that be true ? It doesn't seem to me that it would be hardware based in that case - unless it's just a specific component, like the Airport module or something.
The last line displayed in Verbose mode when it hangs is:
"athset_txchainmask[5124] sc->sc.config.txchainmask 5 mask 5"
It also says something about the Airport just before that.
I tried removing the Airport module and it still hangs.
I also tried different RAM, with the same results.
I ran the 10.6.2 combo update in Safe Mode. It still hangs. Haven't tried 10.6.3 yet, though I do have it downloaded and ready to install.
This thing is driving me crazy. Please tell me there's a fix, OTHER than replacing the logic board ?!?! It just doesn't seem like it should be so complicated considering that it runs in safe mode.
It's rare I can't figure out a Mac problem - please help !
Message was edited by: maxtechsystems

Very strange, and getting stranger !
Ok... so, from safe boot mode, I installed Windows XP Pro using the boot camp assistant.
Everything installed perfectly. I started up from Windows, and put in the Mac Mini recovery disc, in order to load the drivers. The Boot Camp software started with Auto Run, and I clicked through to install everything. The drivers start loading...Windows reacts positively, with the system tray announcing "new hardware installed" every 30 seconds or so. Airport/WiFi IS working (in Windows), as it detected my router/network...this is where it gets F'ed up - when the installer gets through with the drivers, and installs the boot camp software for Windows - the system reboots, goes through the usual Windows startup...the desktop background appears, but no icons or start menu - then it reboots again...same thing, again, over and over in a loop.
Went back into OS X (safe boot mode). Installed reEFIt (a bootloader utility), to see if maybe I can bypass the Mac OS/Boot Camp bootloader. No luck. Install worked, but still had the same issues.
For the heck of it, I try installing Linux Mint 8. The live CD starts up OK, but only as far as the boot menu. I tried the installer first - after the splash screen, it hangs on a plain gray screen (w/o the normal linux installer language selection menu - just solid grey).
I tried running the live CD w/o the installer - the actual OS. Same thing - after the splash screen, it hangs, only it's a black screen this time. If I use verbose mode, it still seems to hang on the WiFi card.
Here's the strangest thing yet - Ok, remember, it wouldn't boot normally into ANY Mac OS volume - including the installer DVDs - only in safe boot mode...
So, I try the "hackintosh" IPC osX86 10.5.6 DVD - it boots into the installer with NO problem, WITHOUT safe boot mode ! I tried installing it unsuccessfully. I forget now which options I choose, if any, though I may try it again later and pretend it's just a non-apple PC with the same specs as the Mini (or try just the "base system", and the bootloader - then run the official Apple updates)
This last thing really makes me think it has something to do with the EFI/bios - however, I've only been able to find info on how to update it, not replace or restore it - and it's only from a working install, not forced from a flash drive or CD (plus when I do try the installer from safe boot mode, it says it's current and unneeded).
I still haven't changed the hard drive. After almost successfully installing Windows, I made the assumption the -hardware- was OK, and reassembled everything.
Currently, I'm trying a direct installation of Windows XP Pro SP2 with which I'll try installing the drivers WITHOUT the boot camp software, to see if the WiFi (Airport card) and everything else is indeed working OK (remember too that the system passed ALL the ASD 3S116 tests).
So anyway, that's the current status. Any new ideas anyone ?
Thanks.
Message was edited by: maxtechsystems

Will not boot normally, but will boot into Safe Mode... what now?

Hey y'all, I've got an iBook G4—purchased in 2003—that's had its hard drive replaced (due to the OE one failing) and that's on its second battery (which will need replacing soon unless I can't get this resolved, then it's new computer time... ugh).
Last night I left it open and on and probably had a couple of sites open in tabs in Safari, as well as Mail and iChat open (Preview might've been open, too).
When I went back to it this morning it wouldn't come off the black screen (I don't have it set to sleep), and I thought it was because it's dry here and I must've discharged into it through the trackpad (though I've always felt it before), which freezes it, a problem that's happened before and that's normally resolved with a restart. Confirmed it was, indeed, frozen by turning the number lock on and off (which turns the light for it at the top of the keyboard on and off).
Powered it down by holding the power button. On restart it wouldn't go beyond the black screen. Tried it a couple of times, same problem. Things were pretty warm, so I let it sit for a while. Went back to it and it would freeze on the gray apple screen with the progress "gear" freezing after a few seconds of whirling about. Managed to get to the UN/PW screen once, but it froze after entering my UN and PW. Now it freezes on the apple/gear screen every time.
I used the Hardware Test CD to check things and all the hardware tests showed up fine. Booted it into Safe Mode and ran Cocktail. Rebooted, no joy.
Booted again into Safe Mode and backed it up onto an external HDD using CCC. I had done a clone a few weeks ago, but I wanted my most recent emails, etc.
Used Disk Utility to repair permissions. No change. Attempted to boot from my cloned disk image. No go. Repaired some permissions on that drive and tried again. No joy.
The thing "works" in Safe Mode, but I cannot get it to boot into things normally.
Seeing as it was online, is it possible that I picked up some corrupted font that's causing these problems? Got that idea from other stuff I've read online regarding iBook G4 start-up issues and this: http://support.apple.com/kb/HT1564?viewlocale=en_US
Any other ideas?

Gents, truly, thank you.
In safe mode I couldn't disable the Airport card as it was already off and the hardware was "not found". No biggy. I simply pulled it. Booted up normally without a problem several times.
I swapped in a known-good Airport card from another iBook G4 and put this one's in that iBook. That computer wouldn't start and this one started up no problem (and I'm posting from it).
Weird that it would go bad like that, but it did. It's nice to know what the problem is and that the fix is easy. I'm glad I didn't go through any restore or wipe and install procedures.
So, again... THANK YOU!

Hard drive won't boot into safe mode

My mid 2010 Macbook Pro has suddenly decided to not boot up after installing BitDefender and running a scan.
I installed it on a whim when I saw minor malware that hijacked Safari, and decided to run a scan. While I was working on Photoshop, the scan must have finished because all of my windows disappeared and I was left with my desktop and the spinning gray loading at the bottom of my screen. I waited 20 minutes, realized it wasn't going anywhere and force shut down the Macbook by power button.
Now, I cannot successfully get it past the grey apple loading screen. Attempting to boot into safe mode still leaves it at the same screen. Tried to reset the PRAM, still can't get past the loading screen. I still have my OS disk, however it is Snow Leopard and my current is Mavericks and I'm unsure if it is a wise idea.
15 inch mid 2010 Macbook Pro running OS X Mavericks, how dead in the water am I and how much would this cost me to "fix"?

Use the original Snow Leopard installation disk and start the MBP as if you were going to reinstall the OSX. Early in the process you should see a menu bar on the top of the display. Click on UTILITIES and from the dropdown menu select Disk Utility. Run Disk Utility>First Aid, Verify and Repair. If it is not successful, the HDD will have to be replaced.
Ciao.

Can't boot into safe mode or prompt login window, need help.

Hello all,
This is cross-posted from the installations and set-up list.
Can anyone suggest a remedy for what's ailing this powerbook. its a g4 powerbook, i don't have much more info other than that. all indications are that it is running 10.2.6, although i was told that it had been updated to 10.2.8, its possible that it was updated only to 10.2.6. following the update, you get to the apple and spinning pinwheel screen and it will not proceed. literally, the pinwheel will spin for 24 hours+.
it looks like it gets to the point of the startup(login) items and hangs indefinitely. ie it will
if i start in verbose mode it will, give some clues:
truncated or malformed library: /System/Libray/Frameworks/Security.frameworks/Versions/A/Security
Some starup items failed to launch due to conflicts
/usr/libexec/crashreporterd: crashdump terminated by signal 5
init: getty repeating too quickly on port /dev/console, sleeping
/usr/libexec/crashreporterd: crashdump terminated by signal 5
last message repeated 10 times
/usr/libexec/crashreporterd: crashdump terminated by signal 5
init: getty repeating too quickly on port /dev/console, sleeping
/usr/libexec/crashreporterd: crashdump terminated by signal 5
last message repeated 5 times
this will continue to be repeated and i assume a new core.## file is sent to the /cores folder, until the hard drive is maxed out.
I can boot in single user mode and everything is fine but i cannot boot into safe mode.
fsck says the disk is fine, as does disk first aid, i have also corrected permissions, and followed many of the things that have been previously posted.
It looks like ther are conflicts with some startup items, what can i move from the starup folder and is best not to be touched?
what about the truncated library message?
also can i update to 10.2.8 from the single user mode, if i cannot get into safe mode?
any suggestions?
thanks in advance-
todd

I have solved this problem. I mounted the laptop in target mode and replaced this file:
/System/Library/Frameworks/Security.framework/Versions/A/Security
with the equivalent file from a machine running 10.2.8.
It booted all the way through then i upgraded to 10.2.8.

Can't boot in safe mode AND no sleeping, can those be connected? Can those be SOLVED?!

Hello and thanks for reading this.
My MBP with Lion is having 2 problems and I:
- Would like to solve them
- Was wondering if they are connected.
BTW, tried vastly googling both and read quite a lot in different forums and the Internet, but couldn’t come with a solution, just succeeded to live with. (Something like marriage)…
The first problem: if I leave my computer to go to sleep and it does for a long time, when I try to wake him up, I get either the SBD (Spinning Ball of Death), or stuck in a black screen. Need to push the power button.
What I do is, before going to sleep/long time away of computer, either close the lid or Apple icon-> Sleep and that’s fine.
Second problem: can’t boot into Safe Mode.
Immediately after the startup chime I press the Shift key, after 2-3 seconds get the login window, key in my password. Instead of logging in, it goes to a screen with the Apple icon, underneath the Apple spinning gear and underneath that a loading bar.
After quite some time the loading bar disappears, the gear goes on spinning for a LONG time, then black screen, startup chime again and login window. Then, when I key in my password, it just logs in as usual, no safe mode.
I tried to write in Terminal “sudo nvram boot-args="-x"”, BIG mistake! It got my computer into a never ending loop of those screens. I don’t exactly remember what eventually got me out of this loop (I think I booted from a clone, then started with the Lion CD and wrote back “sudo nvram boot-args=""” in Terminal.
I also tried reinstalling the OS, all that without any successes.
Any ideas anyone?
Thanks in advance for any help.
GM

Created.
Exactly the same process.
And now I realize something interesting:
I didn't realize that lately the startup login window, instead of bringing my 3 accounts, brings only mine (in the preferences pane after I login they appear, as usual, but not in the login window).
Now, I am constantly backing up to 2 separated external hard disks an incremental backup to a bootable clone. If I boot from one of them it does bring the 3 accounts.
Do you think I should stop bothering about troubleshooting and just erase the hard disk, install the Lion from scratch and that's it?

Won't boot into safe mode

My 2012 iMac 27" was randomly rebooting itself, while in Sleep. I assumed this was due to the cheap 32 GB memory I bought, but before I could change it back to the original memory, to test, the Mac booted into Safe Mode (I assume - a progress bar showing at the bottom of the boot screen, below the Apple logo), and did not get further than a half the way, and then shut down. I swapped the memory to the original 8GB. I tried booting again, no buttons held down, as then it wouldn't get further than a quarter of the way. Further attempts to boot do not work, even when holding down Option to choose the boot disk, pressing Shift for Safe Mode, or Option-S for Single User Mode. I assume it's trying to boot in Safe Mode, but failing?
I also tried using a good Mac with the bad Mac as the Target Disk boot mode - the good Mac does not see the bad Mac...
I have an external DVD drive, but that isn't an option as I can't go into boot drive select mode. What are my options, apart from sending the iMac back?

Booting into the Recovery HD should allow you to effect repairs - that's the point of it, so it's a bit concerning that it won't allow you to. The Recovery HD is a partition on the internal drive that should allow you to effect repairs to the Macintosh HD, albeit part of the same physical disk.
I'm no expert, but I'd be concerned that the hard disk is on the way out. Do you have backup of everything - Time Machine or a bootable clone, perhaps?
Maybe have another try with Command+r. If it fails I'm not sure what would be the best next step - it depends if you have a full and up-to-date backup of your disk so that you can restore.
One of the options of the Recovery HD is to allow you to re-install the OS, which won't delete your data.
The more extreme step would be Internet Recovery which would involve erasing everything and re-installing via the internet.
Worth reading this carefully before proceeding: http://support.apple.com/kb/HT4718
Disk Warrior from Alsoft (not cheap) is another possibility for recovering damaged disks, although it's not a guaranteed solution.

OS hangs at grey startup screen, won't boot into safe mode

I rebooted my G5 this morning and when it came back up, it hung on the grey screen with the Apple logo and the spinning 'gear' progress bar. I tried rebooting several times, but that didn't help. I tried booting from the install DVD (which it did) and ran disk utility (both verify & repair on the start up drive and on permissions. It claims to have found permission errors and fixed them.) I hunted for answers online and tried to boot into safe mode, which did not work.
Someone mentioned booting into verbose mode and I saw that the load sequence was choaking on the login.
What could the problem be and how can I fix it?

Hi Yosarian,
Minor permissions repairs are no concern: The good news is that your data is probably OK.
Three things can be happening: Some of the machines boot settings are corrupted, or the OS files or settings are damaged, or there's a hardware problem.
Resetting the machines power management chip, called a PMU or SMU, depending on your computer, and the PRAM will resolve machine boot settings problems. Run a google search for your model of Mac plus reset pmu OR smu for instructions. After that, reboot your computer and hold Option-Apple-P-R down as you power on. Hold all 4 keys until you hear the startup chime a second time.
You can test your hardware with the grey disk that came with it that ays AHT in little letters. Boot from the CD and run the extended test. Be patient: AHT can take a long time to boot and run.
If you reset your PMU and PRAM and pass a hardware diagnostic but still can't boot normally, in safe mode, or in single-user mode, the problem is system software. Reinstall from your latest installer, checking off Archive and Install and Preserve Users and Settings from the Options screen available at the screen where you choose which disk to install to.
Good luck,
John

Boot into safe mode and touschscre​en doesn't work.

Similar Messages

Maybe you are looking for

Boot into safe mode and touschscreen doesn't work.