Boot Into Windows or LInux Directly with rEFIt

Hi,
I'm installing Linux on my MBP. How do I setup the GRUB so I can boot into Windows or Linux directly without having to "--> Windows --> Windows or Windows --> Linux
THanks.

Similar Messages

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
Thanks

Hi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IMac with bootcamp and parallel boots into windows 7 but won't boot intoxc lion.

IMac with bootcamp and parallel boots into windows 7 but won't boot into Mac OS lion?

Hi,
Thanks for your suggestion. Actually that was not the problem, because I had the Mcintosh drive set as my boot drive. The answer was that my Lion Os got somehow corrupted and I had to reinstalll Lion. This was all after I discussed the situation with the Apple Support people.

Trying to boot into Windows with no Windows Partition

So I tried Windows XP on boot camp and ofcourse it says it's not installed when it clearly is >_>
So I restored and when I boot up it tries to boot into windows, when it loads it says Disk Error insert boot disk. When I hold alt it only shows Macinstosh HD.
I've just re-partitioned and restored to Mac full partition again so I need to reboot and see if that works...
Any help?

Ubuntuz wrote:
So I tried Windows XP on boot camp and ofcourse it says it's not installed when it clearly is >_>
So I restored and when I boot up it tries to boot into windows, when it loads it says Disk Error insert boot disk. When I hold alt it only shows Macinstosh HD.
I've just re-partitioned and restored to Mac full partition again so I need to reboot and see if that works...
Any help?
The last line in your post says "I've just re-partitioned and restored to Mac full partition again so I need to reboot and see if that works"
Rebooting should take you to OSX provided you removed the BC partition correctly (using Boot Camp Assistant)
I am not sure what you mean by the rest of the post "So I restored" restored what?
It sounds as though XP was either not installed or not installed correctly, what happens now when you reboot?

Black screen when trying to boot into Windows 7

Hello everyone.
Today we've encountered an issue with one of our MacBook Pros with Windows 7 installed. The computer was booted into Windows 7 (it's strictly used as a Windows machine by this particular user) and after a time of inactivity it went to sleep. It wouldn't wake up from it's sleep so we tried a hard boot. At that point we would get the grey screen, the Apple tone wouldn't sound off and it would just go to a black screen (by default we have it booting to windows). So then we reset the PRAM. Now, we get the apple tone and we can boot into the Mac side. But when we try and boot into Windows, we get a blank screen.
What's even more interesting, if I try and boot into a Windows install disk to do a boot repair, it gives me a black screen. If I even try to boot from a live Linux cd, I get a blank screen! When important thing I then noticed was that the cd spinned for a couple minutes, then stopped. So I began to wonder if it was still loading the OS like expected, but just wasn't displaying it.
So I booted into Windows, got the blank black screen. Then I went into another computer, fired up remote desktop and voila! I'm in the machine!
So the problem is this: When booting into ANYTHING other than OS X, the display turns off.
What can we do?

Hello there,
I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
Also when it's trying to reboot in windows a blue window appears,says something about drivers and it is counting something (79.78...till100)but I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
I m sorry if I confused you with my english...
If anyone knows please help!
Thanks

Cannot boot into Windows XP, should I replace hard drive?

THE PROBLEM: I have not been able to boot into or use Windows XP (SP2) for almost 3 years. I have been using Linux instead for 3 years and am using it now. The Windows Recovery process only half works, it works up until you have to boot up the computer from the hard drive. Then it no longer works. The computer will load the files from the TOSHIBA Recovery and Applications/Drivers DVD that came new with the computer onto the hard drive. But when you get to the point of booting off the hard drive, with newly added Windows & Toshiba files, nothing happens. It does not boot up into Windows XP. In fact I can see the newly added Windows & Toshiba fileson the hard drive when I boot into Linux (Live) off the hard drive.
THE HARD DRIVE (Specs below): I ran a SMART Data check using a Linux (Ubuntu) Disk utility on the hard drive and it passed everything except for Reallocated Sector Count. There are 20 bad sectors. I called the Toshiba 800 # on the DVD and they told me that the problem may be the hard drive. A new TOSHIBA Recovery and Applications/Drivers DVD costs $40. Toshiba also said there is no Windows XP Recovery Console on the DVD.
CAUSE OF THE PROBLEM: I think, and TOSHIBA agreed it is either the hard drive or corrupteD files on the TOSHIBA Recovery and Applications/Drivers DVD
POSSIBLE SOLUTIONS: I have found a couple of sites that seem to have instructions for making a Windows XP Recovery Console CD. And I have thought I might try to run some Windows XP Recovery Console commands from such a CD, such as fixboot, fixmbr, etc. The try to see if I can boot into Windows XP from the hard drive. If I can, then that might suggest he problem is corrupted files on the TOSHIBA Recovery and Applications/Drivers DVD. If I still cannot boot into Windows, then maybe I should replace the hard drive. This should be very easy to do.
QUESTION(S): Does anybody have any comments or suggestions? Does my approach sound good? Do you have any other suggestions?
I have a TOSHIBA Satellite L25 S1216 that I bought new in early 2006. It has a 40 GB (5400 RPM) Enhanced IDE (ATA-6) 9.5 mm height hard disk drive in it. User removable, i.e., it is easy to replace.
Thank you,
Bob
Solved!
Go to Solution.

My plan is to try to use the TOSHIBA Recovery and Applications/Drivers DVD to load the WIndows XP files onto the hard drive, then use the Windows XP Recovery console CD I downloaded from here
http://www.proposedsolution.com/downloads/download-windows-recovery-console/
by using commmands such as fxmbr, fixboot, etc to see if I can get the computer to boot up into Windows XP.
Good plan, Bob!
Description of the Windows XP Recovery Console for advanced users
A backup plan would be to obtain a Windows XP installation CD from eBay or wherever. They are super cheap now. Then you could install Windows clean and add the drivers and utilities from the website here. Or you could use it to repair-install Windows.
How to Perform a Windows XP Repair Install
You are entitled to activate Home Edition for free. I understand that even after Microsoft no longer supports Windows XP (in April), they will honor activation attempts.
I wouldn't mess with SSDs. And stick with IDE PATA drives. You won't need to worry about advanced-format technology since that didn't come along until the very recent SATA drives. Your BIOS should support 120GB (KB303013). Some here.
-Jerry

Creating a "Boot into Windows" button/shortcut

Does anyone know if there is a way i can create a "boot into windows" button for linux. I would like to put it on my linux desktop, so when i need to boot into windows, i can shutdown arch and boot right into windows, without having to go through grub and all that stuff. I have read something about qemu, but dont really know if that will work. Any help would be appreciated.
Thanks!

_Gandalf_ wrote:
I hope you are using ext3 ...
IMHO if you are using ext3 your problem is solved, create 2 menu.list one called menu.list.linux and the other menu.list.windows, put the default entry to the desired one and take the delay down to 0 along with hidemenu command ( boot into selected distribution instantly.. )
On linux create the following script
#!/bin/sh
cp /boot/grub/menu.list.windows /boot/grub/menu.list
[[ -f /boot/grub/menu.list ]] || exit 1
shutdown -r now
Now go to windows, install Ext2 FS ( http://www.fs-driver.org/ ) mount the boot partition and create a bat script
copy E:bootgrubmenu.list.linux E:bootgrubmenu.list
i dont remember if u can reboot from a bat script but that will do the trick...
P.S: yea i know, it would be better to use one script and use sed/awk to patch it, but how will he patch it on windows ? personaly i don't know how :oops: so I took the idea of 2 menu.list(s)
I am using EXT3 and i already have the Ext2fs installed, so i think those 2 scripts should do the trick!

Can't get past gray screen for OS X but will boot into Windows partition.

Hi- I am really desperate for help here.
Restarted my computer this evening when Front Row wasn't able to find the files on my external HD. When it booted it went directly in to my Windows Boot Camp partition. So I restarted, held down 'option', choose my OS X disk and just got the spinning sun icon on the gray screen for several minutes. It then booted into Windows again. If I hold down 'option' again I can cut it off before it gets to Windows.
I've tried booting into a cloned HD via FireWire and same results.
I've tried booting with the install disk (c key held down) and it won't recognize it.
I've tried Safe Mode (shift key) - same.
I've booted into Single User and done fsck and and it says everything is ok.
- BUT I did notice it says further up- "BSD: rootdisk0s2, major 14, minor 2". Are these errors? If so why didn't fsck find and fix them.
I've tried resetting PRAM and SMC.
The only thing I have done out of the ordinary was an hour before I was trying to get some of my files on my wife's laptop and went into permissions on my HD and changed "Everyone" Priviledges to Read (or maybe it was Read and Write) then chose "apply to enclosed items". This change took about 20 minutes.
The computer is, of course, just over a year old and has worked perfectly up until now.
Someone-Please!!!

Tried that and it just doesn't read the disk. I've booted it with the disc already in and held Shift and also tried it with "C". The same for putting the disc in just as it boots up.
I went into Single User mode again and compared the text against what shows up on the laptop. Their are a few differences. At the very beginning of the iMac text there is:
npvhash=4095
hi mem tramps at 0xffe00000
PAE Enabled
64 bit mode enabled
-then-
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
-then- after "MAC Framework successfully initialized" comes this three times...
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
These are really the only major differences that I can see in the Single Mode screen.
I also have tried booting from the Firewire drive clone on the laptop but it is not an available option for booting. The disk partitions mount but have a lock in the corner and say they cannot be opened because I have insufficient access privileges.

No SATA drive after booting into Windows (BootCamp 5.0)

One of my DVD burners has failed in one of my 2008 Apple Mac Pro's. I pulled the drive out (it was PATA/IDE) and replaced with a new LG WH14NS40 Blu-Ray Burner. I had to pull the fan out (temporarily) and run a new 24" SATA cable (with right-angle connector) from one of the two extra SATA ports (on the motherboard) to the new actual SATA drive, and also install a MOLEX to SATA power connector.
I managed to get the drive installed (and working). I now at least have a Blu-Ray burner in my 2008 Apple Mac Pro (with OS X 10.8.3 Mountain Lion).
The problem seems to be with when I boot directly into Windows 8. When I boot into Windows 8, the two ports on the motherboard are disabled and the latest BootCamp 5.0 drivers don't seem to support the two SATA ports on the motherboard (they seem to be disabled). So when I boot directly into Windows, my LG WH14NS40 Blu-Ray drive disappears.
I really wish Apple would have just "done things right" from the very beginning and took the time to write decent BootCamp 5.0 drivers that supported the two SATA ports on the motherboard, so that users who need to replace their old/dying/aging PATA drives could easily replace them with SATA drives and use the two SATA ports on the motherboard.
Also it would have been nice if Apple would have taken the time to write good BootCamp 5 drivers (for Windows 8) that support booting from the two SATA ports on the 2008 Apple Mac Pro motherboard.
I've heard of many people that have tried installing RAID Controller Cards (from OWC) in their 2008 Apple Mac Pro to upgrade their four hard drive caddys from SATA II (3Gbps) to SATA III (6Gbps) but unfortunately the RAID Controller Cards don't seem to be bootable and the only option is to install a fifth (bootable) hard drive into the Apple Mac Pro and this is normally done by installing a bootable SSD drive into one of the DVD-drive bays. Unfortunately if you use a SATA SSD drive (which most SSD's are SATA) and then use one of the two SATA ports on the motherboard to connect it, then you go back to having the problem of not having a boot drive when you boot directly into Windows 8 (since there are no BootCamp 5 drivers for the 2008 Apple Mac Pro that support the two SATA ports on the 2008 Apple Mac Pro motherboard).
This seems to be a never-ending problem, and we have twelve 2008 Apple Mac Pro's (along with an office full of 2008/2009/2010/2013 Apple Mac Pro's) and we're getting extremely frustrated with Apple's lack of support in BootCamp 5.0 drivers for the 2008 Apple Mac Pro (and the two SATA ports on the mainboard).
Please fix this problem, and please update the BootCamp 5.0/5.1 drivers (for 2008 Apple Mac Pro users) and please support the two SATA ports on the Apple Mac Pro mainboard, and please make those two SATA ports on the motherboard bootable and usable in both Microsoft Windows 8 and in OS X 10.8.3 Mountain Lion. Please update the BootCamp 5.0 drivers to support the two onboard SATA ports in Windows 8 (so that my Blu-Ray burner is viewable/usable in Windows 8).

Just as a follow-up, yes it does seem to be possible to get both SATA ports on a 2008 Apple Mac Pro working (in Windows 8).
You need to enable AHCI in Windows 8.
First boot into Windows 8 and then go into the windows registry (regedit) and enable AHCI in your registry.
You can do this by going to the following registry key:
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci
Set the "Start" Value data to "0" (to enable AHCI in Windows).
After AHCI is enabled in Windows, then reboot your computer and now the SATA drive (connected to the ODD port) should appear in Windows (under devices).
Now the next step is to update your AHCI drivers (in Windows) to the latest Intel drivers, so that your SATA device will actually work (and work properly).
The latest Intel RST drivers can be found here: https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=2306 0&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=In tel%C2%AE+Rapid+Storage+Technology+(Intel%C2%AE+RST)&lang=eng
Download the 64-bit drivers (if you are running 64-bit Windows).
After you install the latest drivers, and perform a reboot, your SATA drive should now work under windows.
You can find a long detailed thread about enabling AHCI (in Windows 7) here: http://forums.macrumors.com/showthread.php?t=760482
The thread listed above is a bit old/dated (2009?) but it does give detailed step-by-step instructions for those that want to enable AHCI (and get those two onboard SATA ports working in Windows 8 or Windows 7).
I managed to get everything working in Windows 8, and I was able to enable AHCI in Windows 8, installed the latest AHCI drivers and I'm now able to use my SATA Blu-Ray burner in my 2008 Apple Mac Pro.
Hope this helps!
-> Mark

Can only boot into Windows 7. Can't even boot from Snow Leopard DVD.

I have no idea what prompted this. I don't recall installing any OS updates recently, other than some Windows Live apps in Windows 7.
I have an early 2009 Mac Mini with Snow Leopard, and have Windows 7 64-bit installed in a Boot Camp partition. When I installed Windows 7, I couldn't get the Boot Camp utility to install within Windows (I guess because it's 64-bit) so to switch back and forth between OSes, I just shut down the Mac and restart it with the Option key pressed, and select Mac OS X when I want to return to Mac. This has worked for about a month and a half now (ever since I got Windows 7). Suddenly I have problems.
I first had problems booting into Windows or Mac. I got to the grey screen with the Apple logo, with that spinning "progress" thing going for a while, then it would freeze up and get stuck on the grey screen with the Apple logo. I zapped the PRAM. No help. Then, after disconnecting all external drives (I have several) and extra USB devices, I was able to boot from the DVD install disk and reinstall Snow Leopard on my internal drive. Joy, or so I thought. Then I booted into Windows 7, and after some weirdness getting it to start, it did successfully start and ran just peachy.
Then I turned off the Mac and held down the option key (as usual) to return to Mac OS. But now all that happens is that I get a grey screen for a few seconds, then the Mac boots back into Windows 7, which seems to work fine. (I'm in Windows 7 right now.) I turned on one my external drives (Snow Leopard installed, connected via Firewire 800) in hopes that the Mac would boot into that, but same thing. Ignored and back to Windows 7.
Then I thought I'd boot from the install DVD again by putting it in the drive and holding down the C key as I restart, but the same thing--a grey screen for a few seconds, and then booting right into Windows 7. I can't seem to escape Windows 7! It's a bit disturbing when it won't even recognize the install DVD.
I tried to call Apple Care since I'm within my 90 day support window, but of course they are closed. I'm figuring that I'm going to have to take this into an Apple Store, but thought I'd see if anyone has any ideas. Any advice will be appreciated. Thanks.

According to Apple, Win 7 64bit is supported with Bootcamp 3.0. If bootcamp 3.0 is available; I could not find it anywhere on Apple's website. It appears the most recent version is 2.2. The only place I could find 3.0 is not on Apples website and it's a questionable source so I won't post it here.
It may just be a matter of time before Apple makes it available. I'm not suggesting you wait, however if the install disk can't be used, I'm not too sure where u could go from there. Calling Applecare might work.
If you do a simple google search using the terms 'download bootcamp drivers windows 7' u will see what I was referring too.
Here's what I found from Apple (It doesn't specifically mention 64bit however just win7): http://support.apple.com/kb/HT3920
This is not from Apple, but specifically addresses whether they support win7 64bit: http://www.macnn.com/articles/09/08/31/boot.camp.win.7.64.support/
Here is more info about bootcamp 3.0 and win7: http://www.apple.com/support/bootcamp/

Unable to boot into Windows 7

Hello, today I was playing some video games inside of Windows 7, upon noticing that whenever the computer had an area that text could be entered, it would spam the space bar into that area. Ex. when i would hit the start menu, in the little text box that is for searching, the courser would move continuously across it, as if the space bar was being pressed. So I restarted. As normal when I heard the startup chime i pressed and held the option key to bring up the OS selection tab. But instead of bringing up the menu, it booted straight to OSX. (i tried this a few times with the same results). So I went into the bootcamp menu in settings on osx and selected windows as the startup OS. I then restarted. When the computer started up I was prompted to select Windows 7 to continue the boot process, so I did. It then went to the starting windows screen where it became stuck. I force shut down and tried again, but this time i tried to repair the disk in windows. The first time it failed to repair, then i did a memory test and when it restarted it worked. In windows i told bootcamp to use OSX as the startup disk and tried holding down option to go back to windows again, nothing, it went to osx. So in osx i went into the bootcamp menu in settings again, and selected windows and restarted. It got stuck on the selection screen in windows and i force shut down and tried again, but this time with with repair again. This time the repair was successful and it went to windows normally. So now it appears that i can only boot into windows by telling bootcamp that i want to boot into windows automatically. Holding down the option key does not seem to bring up the disk selector. I can verify that the option key does work because i tried 'command+option+esc" and it worked. any ideas on what the frik is going on?

Update! So apparently I believe the problem is coming from a few windows updates that are out. Whenever I repaired the disk it always uninstalled those updates. I repaired the disk again because it got stuck on bootup and when i logged back on it asked me to re install those updates. without them installed the option key thing worked again. So i guess i wont be updating this thing anymore...

Cannot boot into Windows

You have probably heardd this a thousand times, but...............
I have installed Solaris 10 on a hard drive with Windows XP Pro & Windows XP Pro 64 bit on other partitions.
Although the GRUB option to boot into Windows is there, chosing it results in the system hanging (ie black screen with just a flashing cursor).
Attempting a repair with XP 64 bit results in an error message to the effect that a "valid partition etc etc" does not exist.
Both the XP and XP 64bit paritions are still there and I can access everything on them from Windows on a second disk.
I therefore take it that the MBR has been changed.
So, you know the next silly question - how do I fix it so I can boot into my Windows XP Pro & Windows XP Pro 64 bit ?
Mike

It is advisable to be a bit more conservative and to perform backup of MBR before starting installation in quite complex environment. Appropriate command may have the form:
dd if=/dev/hda of=mbr.bin bs=512 count=1
Restoring:
dd if=mbr.bin of=/dev/hda bs=512 count=1
Here hda is a plug-in, sda may be necessary on other hardware platform.
But at present the milk has been spilled, so this tip is for future use. At first You should check the contents of grub.conf file in Your Solaris boot catalog. I assume that You can start Solaris. Are the partitions with Windows correctly enumerated? Remember that grub numbering starts with 0 (zero). If all is OK, You can try (without any warranty) following grub reinstallation procedure:
1) Boot from installation DVD and start single user shell.
2) Next issue a command:
/a/sbin/installgrub -m /a/boot/grub/stage1 /a/boot/grub/stage2 /dev/rdsk/c0d1s0
3) Check grub.conf contents - it should perform loading from the first disk. The value c0d1s0 depends on details of Your installation.
Additionaly I assume that You have installed Windows operating system on separate partition. All Windows data, i. e. Your user data are on another partition. In such a case You may try as a last resort reinstallation of Windows followed by new Solaris installation (+ previous MBR backup).
Good luck!
Mark

Can't boot into Windows??

Hi!! This is my theory about not being able to boot into windows. If you have made a system repair disc like you should have made on day one; and your PC will not boot with the system repair CD, you probably have some serious hardware problems.
I'm going to steal this reply from cee64 again. A system repair CD can be made from any PC that is running W7 ect.
Hi I'm going to steal this reply from cee64. I'm sure he won't mind!
"It is quite possibly the hard drive is failing or has failed. The reason you can't get into the bios or boot from a CD/DVD is because the bios it hanging trying to recognize the hard drive. Try removing the hard drive and see if it will allow you into the bios or boot to a CD/DVD. If it does, go the hard drive manufacturer's support site, downlod their hard drive diagnostic ISO image, then use the burn from image option to create the self booting cd, then boot to it and run the most exhaustive diagnosis on it if it will boot. If you can't get it to boot to the diagnostic disk while the hard drive is installed you'll more than likely need to replace the hard drive.
If it won't get you into the bios or boot to a CD/DVD with the hard drive out of the system you need to try reseating the ram. If that doesn't help you probably have a bad motherboard. In this case it would more than likely be cheaper to just replace the laptop than fix it."
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
If Seatools found your HD good, then you have a good chance of using the recovery disks or the recovery partion to restore you back to factory setting. If that fails, you may be down to a bad motherboard. I know of no program to test the MB. You can use memtest 86 to test your Ram. I think it tests some parts of your MB, but can't say that for sure.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Hi! I stole this reply from Jerry Edited One link, because it failed to open
Let's start here. The spec above says your machine came with 32-bit Windows Vista. Have you changed it?
We need to reach the recovery environment. Can you do it this way?
http://windows.microsoft.com/en-US/windows-vista/What-happened-to-the-Recovery-Console
If not, burn a system repair disc from this download (assuming 32-bit Windows).
Download Windows Vista Recovery Environment ISO X86 version (32 bit)
-Jerry
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Can I boot into Windows if it is partitioned on a second hard drive?

I want to put my 2009 MBP hard drive into a 2012 MBP by replacing the optical drive with the 2009 hard drive in a caddy. The 2009 has Windows partitioned on it already through bootcamp.
Will I be able to boot into windows through the second drive or will I have to bootcamp the new 2012 drive with Windows?

OK Cool. I think I will try that. Thanks for the tip. I appreciate it.

MAX shows PXI card when booted into Windows but not in Hypervisor mode

Hello again all you helpful forum-goers!
I'm having some difficulties with a Hypervisor system seeing the two Pickering 6 channel programmable resistor cards that are loaded into the PXI chassis. When I boot into Windows mode, MAX sees them under the My System just fine. When I then run the Hypervisor configuration software, I see them both listed, and have them assigned to the Real-Time OS. However, when I then boot into Hypervisor mode, MAX does not see them under the Remote Systems -> Hypervisor Target -> Chassis (or anywhere else), and the drivers report not seeing any modules either when I debug my code running on the real-time system.
Does anyone have any idea what setting or configuration I might have incorrect? Is there any other information I can provide that would be relevant or useful to answer this question? I'm not the main hardware guy, he just got married and so isn't available, so I'm out of my comfort zone. ;-) I write the software that runs on the system, though, so I'm not completely clueless. I know we just replaced the controller in the main chassis with a faster one (unfortunately I don't have the number on hand, the simulator is down in the lab), but I also know we are using that same controller and Pickering card on a different simulator and it is working just fine.
Any ideas? I very much appreciate your time!
-Joe
Solved!
Go to Solution.

Nevermind, the answer turned out to be that I did not have the drivers fully installed on the real-time system. Apparently that caused it to not recognize the cards. I never did figure out / remember exactly how to install the Pickering drivers on the real-time side, but fortunately I was able to just copy all the files that had "Pickering" in their name from the C:\ni-rt\system folder of the real-time file directory from another simulator to this one. ;-)
Cheers!

Boot Into Windows or LInux Directly with rEFIt

Similar Messages

Maybe you are looking for