Boot loop and power button broken

Hi,
I have a new problem with my iPhone 4 8go
Tonight the battery died so when I woke up I plugged it in like I normally do, but after the usual white apple when the phone turns on, I see my lock screen for 2 seconds before the phone shuts down automatically.
If I keep it plugged it stays in a boot loop and just stay off if I unplug it.
I've done my research about that issue, which seems common, and it looks like going in DFSU mode and restore from backup might work.
Problem is, my power button is broken and doesn't work anymore, so I can't do the manipulation with home and power button.
I have downloaded redsnow to try to go in DFSU mode without button but due to the boot loop, the phone is not detected in iTunes...
Is there any way to force the phone in DFSU mode or anything else I can do?

Cotonboy wrote:
Hi,
I have a new problem with my iPhone 4 8go
Tonight the battery died so when I woke up I plugged it in like I normally do, but after the usual white apple when the phone turns on, I see my lock screen for 2 seconds before the phone shuts down automatically.
If I keep it plugged it stays in a boot loop and just stay off if I unplug it.
I've done my research about that issue, which seems common, and it looks like going in DFSU mode and restore from backup might work.
Problem is, my power button is broken and doesn't work anymore, so I can't do the manipulation with home and power button.
I have downloaded redsnow to try to go in DFSU mode without button but due to the boot loop, the phone is not detected in iTunes...
Is there any way to force the phone in DFSU mode or anything else I can do?
That is a software to hack your phone.  You can't get any assistant here per the term of use of this forum.

Similar Messages

  • Ipod touch 3rd gen home button and power button broken?

    My iPod was working fine until a few weeks ago, when this started happening: every time you push the home button, it goes to the "slide to power off" screen, and then no matter if you slide to power off or if you click cancel, it shuts off after a few seconds and then tries to turn back on again. The same thing happens if you push the power/lock button for any amount of time. So, I can only run like 1 app unless I want to have to restart my whole iPod. In addition, sometimes when it tries to turn back on it tells me to plug it into iTunes, which I do and it tells me to restore it. I restored it, and then I unplugged it and it did the same exact thing, where any button press makes it turn off. I plugged it in again and it asked me to restore it again. Nothing seems to be working and I don't know if this is something that can be fixed or if I need a replacement?

    You can turn it on via the Power button or by connecting the iPod to a charging source.

  • My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

    my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

    I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
    i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

    Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
    It isn't the retail version, because that's 10.6.3.
    Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
    OK the language page.
    From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
    Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
    When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
    If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

  • My ipod 3g home and power button wont work!

            Last night I woke up to find my ipod touch on. IT was probably on for 4-5 hours. I pressed the sleep button but nothing happened. I pressed it over and over but no luck. So I tried press the home and power button on at the same time but nothing happened. Eventually it went to sleep and restarted and the home button worked but not the sleep. I restarted it again and now both of the buttons dont work. I restarted it at least 4 times. Eventually the home but will work but it lags about 40 seconds. During the night my ipod would shut off, shut on, picture, shutt off shut on, picture etc etc. I dont think the buttons are totally busted and I feel like I can fix it. I haven't tried putting it into itunes yet. Someone please help!

    -See:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    Some of the above also apply to the Power button. Also see the previous discussions on the right side of this page listed under the heading More Like This.
    - Apple will exchange it for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - A third-party place like the following will fix the switch for less.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

    My phone just turned off and won't turn back on. I've read the posts saying to hold down the home and power button but my power button is broke. Any suggestions?

    There is a thread or two about the home button and how to fix it at least temporally.  It sounds like some people have found it to be a rather permanent fix.  Do search on something like "Home button won't work".  It has something to do with putting the charging cable into the phone and applying a little extra pressure upward on the key.  Don't take my word for it though look for the thread/s.  You said originally that your "Power" button was broken and the thread I have seen is about the Home Button. 

  • HT201412 After I dropped my iphone 4s my back glass broke and now my screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other source and also tried pushing the home and power button.

    After I dropped my Iphone 4s my back glass broke and now the screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other power sources and also tried pushing the home and power button together for about 20 seconds

    It's broken due to neglect, namely being dropped.  Replace it.

  • G60 power led, charge led, and power button led flash continuall​y

    I have a G60 laptop that will not charge the battery or start up and when I plug the power into it the power led, charge led, and power button led flash continually
    If I press the power button I here the DVD drive make a noise and a fan comes on and goes right off.

    Hi
    Probably a hardware issue, may have to contact local technical assistance or HP
    Is the system able to boot up with AC supply only with battery removed?
    Try keeping it charged for 3 hours or so with battery & AC adapter plugged in the lap, and try powering it on again after that.
    Regards
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • My iPhone 5s suddenly has boot loop and shows blue screen.

    My iPhone 5s suddenly has boot loop and shows blue screen. I tried to restore it with iTunes but it says that I have to enter my password on my phone first, which I can't technically do. What to do?
    Also, I've read that I could get a replacement phone from apple but it was bought for me in CA, and I'm in the Philippines. Can I get a replacement still?

    acarstensen,   Help has arrived! Let's take a closer look to see what's going on. Does your device have any physical/liquid damage? Did this issue begin after a recent software update or app download?   EfrainM_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How do I stop an app from waiting?  I have tried to reboot by holding the home key and power button to power down.  Also, I have tried to sync the apps from my laptop with no success.  Can you help?  Thanks.

    How do I stop an app from waiting?  I have tried to reboot by holding the home key and power button to power down.  The app is still grayed out and waiting so it cannot be deleted.  Also, I have tried to sync the apps from my laptop and tried downloading new appswith no success.  Can you help?  Thanks

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • IPhone4 will not turn on. Tried reboot with home button and power button, and tried with sim out. Left on charge for an hour and nothing. Tried plugged into PC and nothing. Tried holding any and all buttons one at a time and plugging into PC and nothing.

    Hi,
    This is for my wife's iPhone 4
    She was on a call and went to end the call and the phone just turned off.
    Left it on charge for an hour or so and nothing.
    I tried the old reboot (home button and power button) and nothing
    I tired with the sim out.
    And with it plugged into a PC, opened iTunes and it didn't recognize that the phone was plugged in.
    I tried my PC and nothing.
    My phone charges and connects to both PC's
    Tried holding the home button then plugging into PC
    Tried holding the power button then into PC
    I've now been trying different combinations for about 3 hours and now I'm all out of ideas.... :(
    Please please can some help before Tuesday when I will have to find someone to repair it.
    Thanks,

    Sounds like faulty battery. Make Genius reservation and take to Apple for quick (minutes) free battery diagnostic testing. If you have Warranty or AppleCare the problem will be covered.

  • My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

    You need to connect to iTunes and restore.
    iOS: Not responding or does not turn on
    You may need to put the device into recovery mode, this is covered in the link on this page.
    Did you back up the device?

  • I have reached out  to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know why it went black

    I have reached out  to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know
    1. Why it went black and is there a permanent fix for this
    2.Will the IOS gets automatically updated as I feel the IOS was 5 when I got the phone in 2012 december
    3.Do you suggest 7.1 for Iphone 4

    1. There is no way of knowing. These things happen.
    2. The iOS only gets updated when you want it to be.
    3. You should always update to the latest iOS your phone will support. Apple do not write the updates to make your experience worse.

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

  • Ipod Stuck in "boot Loop" and itunes says I'm not connected to the internet.

    Aright well I'm having a huge problem fixing my ipod.    Let's start at the beginning, i wanted to put new music onto my ipod but itunes wasn't detecting my ipod, it said i have to restore my ipod to factory settings, so i manually did it from the ipod it's self.   When it started to boot up again it just froze at the apple logo. and the loading wheel is stuck. after some research i found out that its called "boot loop" and the only way to fix this is to restore it from itunes itself.
    sounds simple enough,  so i go ahead and connect the ipod to itunes and try to restore it (via DFU mode) The restore wont happen because it says im not connected to the Internet, when clearly i am.      So in a nutshell..   in order to restore my ipod.. i need to get itunes to recognize that I'm connected to the Internet.
    I've done everything i can think of,   make sure my firewall isn't interfering and itunes is enabled.  The Internet proxy is what it needs to be.  Ive uninstalled and reinstalled itunes.   I actually chatted with a apple tech and he couldn't seem to help me out.
    If anyone can help me or has been in this situation and know's exactly what to do.   please let me know.. it would be greatly appericated

    That was the first thing I tried..what the site told me, but its still telling me I'm not connected to the internet when I am. Should I just delete everything by hand. Like I said I wanted to take it back and upgrade to the 80 gig ipod.

Maybe you are looking for

  • Help in Purchase order check BADI !

    Hi Experts, I have made some changes in the BBP_DOC_CHECK_BADI for the BUS2201 object implementation whereby I had implemented the changes for checking the attachment details in the Purchase Order. Now here I used the Function Module BBP_PD_PO_GETDET

  • I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

    I have adobe cs6 and I can't get bridge or mini bridge open. All I get is "waiting for bridge." can anyone help?

  • Query Execution in RSRT is giving error DBMAN099

    Dear All, i have a BEX query which is being used in the BO dashboards. Bex query is created on a mutiprovider having one cube C_0PUR_C and one standard DSO CO_0PURD. cube and DSO contains custom date fields like ck_grdt which are created as key figur

  • Ftp time out

    when transfering a file to an ftp site, it appears final cut server first touches a new file on a remote ftp site, then encodes the source file, then starts uploading. this causes the connection to the ftp server to time out if the encoding takes a l

  • How to add new folder in Aperture thats been created on hard drive?

    Hey This is probably a simple answer, but here it goes. I manage all my photos in directories such as this: 2007 01 - January 02 - February 03 - March etc..... however I just added the 2007 foler and all its subfolders to my drive tonight, however I