Boot MAC problem with this update: O X 10.10.3

MAC BOOK pro ( OX yosemite 10.10.2) have problems with O X 10.10.3 update (in 2 trial) during reboot.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Similar Messages

  • HT5815 has anyone experienced problems with this update.

    After insaling it I cannot log on to my mac? had to restore to my latest timemachine backup

    Quite a few people have problems with every update. Almost always it is tied to third-party software incompatibility.
    If you run into a problem like that, boot into Safe Mode. If that succeeds, it is definitely a third-party software issue.
    http://support.apple.com/kb/HT1455
    Some company's just can't be bothered making their software compatible with each release.

  • HT4883 i have problem with this update

    i downloaded this version as suggested by an apple guy on the phone and tried to install it but it tells me that i already have a more recent version. the thing is that i don't have java preferences in my utility folder nor i can seem to find it in the spotlight ..
    and on top java doens't let me use  a software for me very important

    I believe the following instructions are what you are looking for and need, if you feel comfortable with them:
         https://service.parachat.com/knowledgebase/226/How-can-I-uninstall-Oracle-Java-7 -and-reinstall-Apples-Java-6-on-my-Mac.html
    Hope this helps

  • New to Mac- Problem with automatic updates

    Hi,
    I have just bought a mac for the first time and have a hard time getting familiarized...
    I bought it in june, installed Mac OS version 10.5.2 of which i had the cd and installed office mac 2008.
    That s about all i installed so far.
    Since the start however, i can not update anything because everytime the automatic update goes on and i start it, after a while it blocks saying the application word must be closed for continuing the updates. the only problem is that word is not opened...
    what can i do? what does it come from? shall i redo the office installation? the os one?
    anysuggesion is very welcomed,
    thanks
    estelle

    Redo the office installation.
    Just let me get one thing clear- are you talking about the software update for apple (apple logo> software update) or the microsoft software update for office?

  • HT4972 Has anybody else had problems with this update like getting 'no service'?

    Since the update, my phone has been getting 'no service' for about a week now. My other mates and people i know have the same problem. No matter where i am, i get no service. If i turn my phone off, i may get service for a minute or two, then i have to switch off. Please sort it out apple.

    Yes, a simple search of the forums or google would have answered that question and provided the troubleshooting to resolve the issue.

  • HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I'm not able to download Itunes.  I keep getting this Apple Software Update message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your package vendor"

    Not able to access Itunes store anymore.  Just quit working for no reason.  I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  Not sure what this message means.  Am I suppose to contact Apple ?  What is meant by package vendor ?

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

  • I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

    I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

    I am experiencing the exact same issue during the installtion process for iTunes 10.5.
    I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
    I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am trying to update my iPhone software but to do so I needed to update iTunes.  When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not

    I am trying to update my iPhone software but to do so I needed to update iTunes.  When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I need to Uninstall Apple Software Update. I am getting error. "There is a problem with this Windows Installed package.

    My itunes stopped working. I uninstalled/reinstalled. But it would not complete reinstall. Started with Quicktime not loading. I have tried to install Quicktime individually. Still nothing. I now am trying to uninstall ALL itunes/Apple to attempt reinstall. But the Apple Software Update will not remove. I get the error :THERE IS A PROBLEM WITH THIS WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN. CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR.

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Apple software update 2.1.3 is giving error  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run."

    Apple Software Update 2.1.3.127 will not install i keep getting the error
    “There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personnel package vendor. ”
    i have tried to uninstall itunes and reinstall and i can not get it to install

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • HT1926 When I try to update ITunes on my PC (Windows XP), the repeated message is "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor

    How to update ITunes on my PC (Windows XP)?? Repeated attempts produce this messsage: "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor."  I have an older version of ITunes on the computer.  Why can't I update it?
    MMettler

    Repair your Apple software update.
    Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR

  • Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

    Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
    Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Any Ideas of how to solve this one?

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

Maybe you are looking for