Boot Manager error message on Windows 7 Toshiba Laptop

Well, I will start with what happened to it, though I don't really know. I was on the internet and it started freezing up horribly, then I didn't know what to do so I walked into the room of the house that doesn't get wireless, and gradually it unfroze. Then I went back to the other room got on again, then it just froze again, only this time walking into the next room didn't work, so I pressed the power button and shut it down. Then when I turned it back on I chose "Start Windows Normally" and I entered my password at the login screen, then it was on the screen that says "Welcome" and has the blue loading bar next to it, but I waited for at least 10 minutes and it still hadn't loaded. So, I try safe mode and all I get is a black screen with a mouse cursor, in all safe modes. Well, I decide to go to setup by pressing F2 at the Toshiba screen when you first turn it on. So, I did that and I restored the default settings, then exiting saving the settings, and then I turned it on, expecting it to work or at least have the Welcome thing. It went through the Toshiba screen, then it had a black screen for while , then I got an error message:
WINDOWS BOOT MANAGER
Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.
If you continue to recieve this error message, contact the hardware manufacturer.
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred.
So then what I did was I plugged in the charger, the mouse ( like on a desktop computer, only I stick this in my laptops usb thing) , my ipod, I put in the last cd I had in the disk drive, and I connected my computer to the modem from the other computer that I sometimes get on. It didn't do anything, it still gave me that message.
I would appreciate some help. I just got this computer in December 2009 for Christmas, and I have taken good care of it as far as I can tell. I really can't afford to replace anything right now, but if I have to I will find a way. What makes it worse is that I just got a new video game sent from my grandmother for my birthday....
Thank you for your help/thoughts/crap

it looks like a corrupted windows 7 OS or hdd issue , but you might try this one
Remove all usb devices and make sure that only ac adapter is plugged in your computer.
Turn on your computer and start tapping on F8. You should see windows advanced option when you do this.
Select on Safe Mode then Enter. If you can boot to safe mode you can try doing a system restore.
OR
On windows advance option. Select Repair my computer
Just follow the prompt and select system restore.
OR
On windows advance option. Select Repair my computer
Just follow the prompt and Windows Startup Repair
=========================================================
the only easy day was yesterday.....
=========================================================

Similar Messages

Can´t boot 0x0000185 error message on windows 8.1

i have a lenovo ideapad flex 10 with win 8.1 preinstalled and with 2 usb ports only, was working on internet when suddenly my screen went black and tried to restart it and it got stock on lenovo logo, restarted again and press f8 to fix windows and i got
a message that said can´t find device 0x0000185 use system utilities or contact system admin. Need help

Hi,
The system fails to boot, in this case, I suggest to repair the system with a installation media if you have at hand in this way:
1.Insert the system repair disc into your CD or DVD drive.
2.Restart your computer using the computer's power button.
3.If prompted, press any key to start the computer from the system repair disc.
•If your computer isn't configured to start from a CD or DVD, check the information that came with your computer. You might need to change your computer's BIOS settings.
4.Choose your language settings, and then click Next.
5.Select a Automatic repair, and then click Next just as the screenshot below:
If this fails to work or you don’t have a DVD installation media, you should turn to Lenovo for support.
Regards
Wade Liu
TechNet Community Support

CS5 Service Manager error message?

I keep getting the CS5 service manager error message - ordinal not found. Specifically ' the ordinal 3873 could not be located in the dynamic link library LIBEAY32.dll' Any ideas please on how to fix this?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

InDesign Content Manager error message in CS3

I recently switched laptops (XP to Win7) and now I'm receiving the InDesign Content Manager error message. I'm running CS3 and the InDesign file is CS3, as well. I also ran the plug-in and software update, but I'm still unable to open any InDesign files. Any help to resolve this issue would be appreciated.

Sorry Willi, that's jut not true. I run CS3 with no issues whatever on two different Win7 pro x64 systems.
I don't, however know what that error message is. Is there any more to it? Have you tried running as Administrator or in XP compatibility mode? (I don't run in compatibility mode, but my users are admins). Do you run a font manager? What do you have for Anti Virus and Malware scanners?

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

When i try to install i tunes i get error message 7 windows error message 126

When i try to install i tunes i get error message 7 windows error message 126

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304)

I keep getting the error message "Restore Windows" Finder application quit unexpectedly. When I click an icon on the desktop on my Mac Book Pro it does not respond.

I keep getting the error message "Restore Windows" When I click an icon on the desktop on my Mac Book Pro, it is not reaponding.

While holding down the option key, select "Go>Library" from the Finder. Navigate to the Preferences folder and you'll find "com.apple.finder.plist". Delete that file and restart.
Good luck,
Clinton

I'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you.

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

Does anyone know how to correct the download for itunes error message 7 windows 193?

I'm getting error message 7 (windows 193) when I download new itunes update.

Try Troubleshooting issues with iTunes for Windows updates - MSVCR80

Trying to install Akamai Manager error message

I have tried to down load my new upgrade but when I go to install Akamai Manager I get this message. Java Plug-in 1.5.0_30 Using JRE version 1.5.0_30-b03-389-9M3425 Java HotSpot(TM) Client VM User home directory = /Users/gayeshakeshaft

Hi
I am upgrading from CS3 DS to CS5.5 DS
Mac OSX 10.5.8
ChocCards
Date: Sat, 10 Dec 2011 09:59:38 -0700
From: [email protected]
To: [email protected]
Subject: Trying to install Akamai Manager error message
    Re: Trying to install Akamai Manager error message
    created by Gautham K in Downloading, Installing, Setting Up - View the full discussion
Hi, Which product upgrade are you trying to install using the Akamai Download Manager? Also, which operating system is your computer running on? Thanks
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4075704#4075704
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4075704#4075704. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can someone explain what I am doing wrong? Windows Boot manager error.

Okay, I've literally searched EVERYWHERE and can not find a reasonable answer to this question.
Everytime I try to load windows on bootcamp, I get this error:
Windows failed to start. A recent hardware or software change might be the cause . to fix problem:
1. insert windows installation disc and restart computer
2.choose your language settings, and then click "next"
if you do not have the disc, contact your system admistrator or computer manufacturer for assistence
status 0xc0000017
And that's it.
I have tried everything from usb to countless 8 gig DVD which I wasted from burning the ISO time and time again.
I am doing everything through the bootcamp installer and I partition up to 80 gigs of space of my hard drive for it.
This is an official iso image from windows btw.
I think it's a memory problem, but I am not sure. Here are my specs:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          3 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B01
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
If you can shoot me some advice on what I may be doing wrong, please do. I really need it urgently.
Thanks!

you really are way too low on memory, but that is not the issue.
all the other hard drives need to be pulled except one.
bumbing is sort of like there are only so many people likely to read and try to help. give us a couple hours or more.
you say Windows, I ask "which?"
And really all the faq and how to and even guide should cover your bases.
Can only guess that the media you used to burn DVD or source.. see, we are not mind readers, some buy System Builder, or buy as a ISO download and burn to DVD... so start with the FAQs.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
For Windows 7: http://windows.microsoft.com/systemrequirements
For Windows 8: http://windows.microsoft.com/en-US/windows-8/system-requirements
Learn more about how Mac computers can run Windows 8 using Boot Camp 5.
http://support.apple.com/kb/HT5628
Products Affected
Boot Camp, Windows 8
General installation questions
What is Boot Camp 5?
Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see thttp://support.apple.com/kb/HT5639
Which Macs support Windows 8?
MacBook Air (Mid 2011 or newer)
MacBook Pro (Mid 2010 or newer)
Mac Pro (Early 2009 or newer)
Mac Mini (Mid 2011 or newer)
iMac (27-inch, Mid 2010 or Mid 2011 or newer)
For more information, see this article. What are the System Requirements for Windows 8?
Please see this article.
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.
Can I use an upgrade from Windows 7 to Windows 8?
Yes. Download and install the Boot Camp 5 Support Software before attemping the upgrade by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3. Alternatively, you can manually download the Boot Camp 5 Windows Support Software here.
When I do an upgrade install from Windows 7 to Windows 8, an "Uninstall USB 3.0 eXtensible Host Controller Driver" message appears. What do I do?
Do not click on Uninstall. Click the back button and Cancel the upgrade. Download the Boot Camp 5 Support Software by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3, or click here to download them. Then, try the upgrade again. See this article for more information.
After upgrading from Windows 7 to Windows 8, Thunderbolt devices are (not) being recognized when I connect in. How do I fix this?
Disable the Windows 8 Fast Boot feature to allow Thunderbolt devices to be recognized. See Boot Camp: Thunderbolt devices not recognized after Windows 8 upgrade for instructions.
Is there an OS X version requirement to use the Boot Camp Assistant to download Boot Camp 5 Support Software?
You need OS X Mountain Lion v10.8.3 or later installed to download the Boot Camp 5 Support Software (Windows drivers) using the Boot Camp Assistant. After upgrading, click the Go menu and choose Utilities. Then, open Boot Camp Assistant and follow the onscreen instructions. You can download the Boot Camp Installation & Setup Guide.
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software. How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support,

Boot Manager error message on Windows 7 Toshiba Laptop

Similar Messages

Maybe you are looking for