Boot older G3/9.1 not from hard drive or CD?

I have an old ibook G3 w/ OS 9 whose hard drive crashed and the CD drive doesn't work, so can't book from a CD. I want to use my ibook g4 (w/ Mac OS X 10.3.9) to try to read and get files off of the hard drive. (Either boot the old computer using my newer ibook or just try to read the older hard drive from the newer ibook.) The G3 ibook doesn't have firewire of course - I can't connect via ethernet and boot could I?
Any other options? Could I boot from a flash drive (would be older USB 1)? Could I boot from an ipod over USB?
Any ideas? Thanks!!!

jbal77...
Sorry, but you lost me on the rational of using another computer to read a crashed drive? Doesn't dead mean dead?
You need some recovery service for the crashed drive not another computer. Also monkeying with a bad drive makes it less likely for successful recovery.
You didn't mention the "order" of failures with the CD and HD. If they both went at the same time there could be other mechanical issues such as the ATA controller that interfaces the 2 may of went bad. That may mean the possibility of a bad logic board.
I think you would be better helped by some professional that can get a hands on look to see what exactly is bad. I also would refrain from trying to interface a bad computer with a good one, as you may end up with 2 dead computers in the process.
...Ron
...Ron

Similar Messages

Yoga 11s won't power on - clicking sound not from hard drive

Looks like I'm two months past warranty, and my yoga 11s is not powering on. Symptoms are as follows, would really appreciate someone's help!
When pressing the power button, the light comes on
A light clicking sound starts
The fan does start spinning
That's it... screen does not come on
When you unplug the charger, a loud single beep results
I took apart the laptop to try to pinpoint the sound, and I believe it's coming from somewhere around the processor. Could it be the heat sink? It's a solid state drive and I don't think the clicking is coming from there...
Any one else have this problem? Any suggestions?!

I had a similar problem and the screen was blank. Not sure if this will help. I searched for a day for solutions but in the end it was the screen that was turned off. I simply pressed the brightness button and one of the other screen buttons on the keyboard and it was alive.

M30x bios does not detect hard drive, wont boot from HD

Can someone help me in this issue.
My Sat m30x wont boot from Hard Drive, instead tries to boot from network.
Tried to load setup defaults and Hd wont show on the settings
tried to reistal origin CD software by toshiba and the message no target drive displays
Can this be a hardware problem, some damaged fisical conection, or is it a bios problem
thanks in advance for some ligth on this problem

My M30x has the same problem. I just have used it for 2 months.
I sent it to the repair center as I was told to do, because it has warranty.
I'm still waiting for a response from them. I don't know what caused it.

T400 problem booting from hard driver, cursor blinking on top left screen corner

I'm having problems with T400 (2765-TDG). It has trouble with booting, which requires 5 minutes power off/on in order to propely boot operating system.
Notebook is less than two months old, fully properly driver updated then so after that nothing is been done on it neither from user or from system administrator.Problem occured suddenly after two weeks of mentioned maintenance.
Symptoms:
After mouse intialization, screen goes black, and on top left corner white cursor blinks
There is no keyb key which can contine booting process, expect rebooting
There is no other device connected to notebook, not even mouse
It's needed several, sometimes 3-4, sometimes even 10, times to reboot with power key in order to get operating system booting
When it suceeds booting, just before booting operating system, in diagnostic mode of booting (with quick boot disabled) I can hear only one beep
What I tried to do:
I've changed BIOS setting to force booting only from hard drive, turned off any other booting device.
Also, changed from AHCI to Compatibility mode for hard disk but with no help.
Turned off quick boot, but during booting process, there is no specific error shown
Upgraded BIOS version to 2.03-1.01 but with no help
Restored BIOS default setup, no help
Did some general diagnostics, and here is what I've noticed:
After changing settings in BIOS, save&exit, computer hangs with black screen. I have to turn it off and back on in order to continue booting. Settings in BIOS are saved properly.
When I succeed with booting into operating system (XP), graphic card sometimes is not recognized, not even by original driver installation. In device manager, I see two recognized graphic card drivers with warning sign, and "Intel management engine interface" device with warning sign
In event viewer, then only error line is "Problem with HECI driver communicating with firmware" or something like that
Operating system is not able to enter in standby mode, it justshows blank screen and I'm forced to switch off notebook by pressing power off button for longer time
Any help appreciated. Thanks! I hope I can deal with this before I send notebook to authorized service.
Vedran
Solved!
Go to Solution.

I'm sorry to tell you, but in may case, I had to send notebook to authorized service provider. They replaced mainboard and hard drive (!?). Now everything works fine, but puts shame on Thinkpad T series notebook.

Booting iMac from hard drive pulled out of Macbook Pro

The other night my friend drunkenly dropped my Macbook Pro. I have taken it completely apart, and can't find anything wrong with it. To pull some information of my hard drive, I removed it and placed it in an enclosure. I brought the enclosure to work, and tried to boot the iMac through the USB enclosed hard drive. All the specifications on the OSX are the same, yet it will not load. Either it keeps spinning, or I get a prohibitted sign. What could be causing this?

They have to be identical computer to boot, unless they are it will not work. It's that simple, if you want to see if they drive is still good boot from another Mac and just use Finder to navigate to the external drive and see if you can view items. You can view and copy and paste data however you will not be able to boot from the drive unless the other Mac is an identical configuration to your MBP.

Hard drive failed on windows computer. all data lost. backed up most itunes on an older model my passport ultra external hard drive. How do I transfer from external hard drive to new computer hard drive?

The hard drive on my windows computer failed and the data is not retrievalbe.
I had a new hard drive installed.
I had backed up on a older model my passport ultra external hard drive my itunes up to about a year ago.
How can I move the back up extenal drive Itunes data onto my new hard drive- will it work on itunes?
===========
Meanwhile my ipod has all my music and podcasts up till a month ago. What will I lose if I put my external drive music back on?

Hi Perilman,
Welcome to the Apple Support Communities! I understand that all of your iTunes media is on an external hard drive and you would like to move that media onto your new Windows computer hard drive. The following article has step by step instructions for this specifically. Part 5 in the External drive section is probably what is going to be most relevant to you.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Part 5: Copy music to your new computer
To copy all your music files (including the library file that holds all your playlists and other settings) to your new computer:
I hope this helps,
-Joe

Deleting from library does not delete from hard drive????

itunes support states when deleting from library, it should prompt to remove from hard drive. i am not getting this prompt. i cannot find a setting that changes this either. please advise
thanks,

It only deletes it from the hard drive if it is in the iTunes Music folder path;
Look at your itunes menu > Edit > Preferences >Advanced tab.
"itunes music folder location"
For example, say it is set to C:/Music. If you delete a file from the itunes library list that exists in C:/Music you'll get asked if you want to keep or delete the file.
If you delete a file from the itunes library lists that exists in C:/SomeOtherFolder, it will not get deleted from the hard drive.

Colour differences & LR not deleting from hard drive

Hi,
I am running a Dell Dimension 1100, a NEC MultiSync 70 monitor, Xp SP 2 home, Olympus Master 2 and a full version of Lightroom 1.0,Photoshop CS2, and use a Olympus E-500 DSLR.
I have a slight issue with how Lightroom shows the colours of my pictures when i am comparing Olympus Master 2 v. Lightroom 1.0. Most pictures its hard to tell the difference without going back and forth constantly, but when i look at my pictures of flowers or landscapes, my pictures look so much more vibrant in Olympus Master compared to Lightroom. Is this a settings issue? or perhaps something else?
Also.....
when deleting pictures from Lightroom, it asks me if i wish to delete from the hard drive or just remove from Lightroom, when i choose delete from hard drive, after it says its done, if i go look at the folder its still there :/.
any help would be apprieciated, I am a novice dslr user and still learning how to use the softwares out there

Are you shooting images in raw or jpeg mode?
I assume that Olympus Master 2 is the raw processing software bundled with your camera. If so, then you are asking why Olympus software renders pictures differently than Lr. This question has been asked (and answered) many times but it boils down to the fact that the Olympus default rendering could be far different than that chosen by Lr. Also, Olympus may embed proprietary information in the raw image useful to Master 2 but entirely unknown to Lr.
If you want Lr to operate more like Master 2, then create a Lr preset (with the appropriate adjustments -- likely a saturation boost), then apply this preset when importing.
Finally, the camera raw engine (ACR) used by Lr is noted for producing images more muted than that produced by software bundled with cameras. In my opinion this is a good thing since the default rendering that many cameras produce is not at all natural. But the powerful Lr develop module allows me to create any interpretation I choose. Including a head spinning contrast and saturation boost.

DV7-6185us wont boot from hard drive.

I recently installed a new hard drive after the one it came with completely crashed. After installation of new hard drives, I inserted and installed all of the recovery disks needed for the new hard drive. Upon completetion it said it needed a restart and after restart I get a message saying I need a OS for the hard drive for boot up.
I went into my bios to make sure the hard drive was first in boot order which it is but when trying to pick where to put from on the bios screen it only give me the cd option. I ran a full diagnostic of the hard drive and everything checks out. I made sure to unplus the hard drive and tried a different slot and still get the same thing. Installation when fine but still won't boot from hard drive.
Is there something that i'm missing? The hard drive is fine. So what could it be?

Hi,
Assuming this is just a problem with the recovery media, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source - Digital River.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

V120 server boot from hard drive freezes

Hi
I just installed open solaris build 75 on a sun v120 server. After the instalation all went well and I configured the processes and users on the server just like I did yesterday on another v120. What i did afterwards that was different from yesterday is that I put the machine on standby by holding the power off (0) switch for a few seconds, then unpluged the power chord. After turning the power on again the server will freeze the boot process in the first 2 steps after it tries booting from hard drive. (It does pass all hardware checks). To comunicate with the server I connect a windows PC on the lom port with serial cable and the SecureCRT software. I tried to break into lom with #. after poweron but it doesn't seem to work. And the lom console in standby wont let me boot from cdrom or anything while in standby. Can anyone give me some guidance here? I don't have much experience with this kind of hardware.

Well, LOL, I did that prior to buying the software. It does meet the specifications. I found the solution on the support site. When I googled before I hadn't googled the error message verbatim. Doing so led me to this page: http://support.apple.com/kb/TS3926 where I was instructed to create a tiny partition (128MB) and then run the installer again. No explanation was given as to why, but this did work and I am typing this via the new OS. Thanks for trying to help me baltwo! Best regards.

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

How to install arch 2009.08 from hard drive? Please enlighten me

OK, I admit I am impatient for the installation from the CD drive. Whenever possible and whatever distro I wanna try, I head first to try to install it from the hard drive. I don't remember how many times and how many distros I have done the same to, ubuntu, zenwalk, sidux, fedora, opensuse and of course arch. It rarely failed as long as I followed someone's guide, sth like "install any OS from hard drive", I do not exactly remember. And I did the same in the past with arch. But after 2009.08, it simply didn't work. I've read the article "fast install arch from existing linux system" in the wiki, it didn't work either (by the way, if someone can solve my problem, I think the article should be updated). After it boots, at some stage, it says "Use Hook [archiso]", then tell me "waiting for /dev/archiso for 30 seconds ..." then when the time due, it throws me into a ramfs shell. I've hacked for a long time, but no luck. Then I went back to download the 2009.02 iso, however, it works flawlessly.
I did find some differences in the menu.lst/isolinux.cfg between two version.
In 2009.02, we have
title Boot Arch Linux Live CD
kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 usbdelay=5 ramdisk_size=75%
initrd /boot/archiso_pata.img
While in 2009.08, it is
title Boot Arch Linux Live CD
kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_AHCOHH6O ramdisk_size=75%
initrd /boot/archiso_pata.img
I know I can install arch from usb, but I simply wanna know what's wrong here, so guys, if you have any idea, don't hesitate to enlighten me.

Hi, vacant, thanks for the reply. I did not notice you are the author of the article. Actually I missed the head of the article which directs me to another (the amalgamated one you mentioned). I take a look at it, it seems to make things complicated. I still miss the old days: you simply download the iso, mount it and copy all the contents into a separate partition, edit your current grub, then reboot and everything works. I don't understand how Arch could be so evolved to exclude this simple installation scheme. I am not complaining the development of Arch. In my opinion, a distro as flexible as Arch should provide as much installation strategy as possible. In this respect, I think we can learn from Ubuntu or sidux (in sidux, it provides a very convenient kernel parameter called "fromiso" which allows you to install sidux from the plain iso, that means, you even don't have to mount it and copy the contents out of it to a separate partition).
Last edited by plmday (2009-10-25 06:25:44)

Logic Board Does Not Detect Hard Drive???

Problem on startup shows "Folder with (?) Mark on it". Tried to use Disk Utility but it does not detect. Replaced drive and still nothing. Use the drive as external and it boots normal. It looks like it's something else. I have order a new cable connection that goes from the logic board to the hard drive, as it's cheaper to obtain than a logic board, but lets just say that it wasnt that and there is a problem with the logic board, can I buy a "9.5 mm SATA Optical Bay SATA Hard Drive Enclosure" to place the hard drive and boot from it? When I went into Disk Utility it did detected the DVD drive, so I know that portion of the logic board works fine. I don't use or need the DVD drive, and wondering if I can do this, it cost less than buying a logic board.
Please let me know if this is possible, Thanks in advance.

Well logic board seems faulty from the connecting point of the hard drive but not from the optical drive. Optical drive is detected by the Disk Utility, but not the hard drive, and thats why I was thinking of using the optical bay to run the machine.

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.

Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Boot older G3/9.1 not from hard drive or CD?

Similar Messages

Maybe you are looking for