Boot problem on 645 combo. help !

i need the "boot from lan" function on my computer. please, someone can tell me how to activate this function on my msi 645 combo (with integrated lan) ?
i have a security card (pc guardian)on a pci slot that absolutely need the boot from lan function to opérate, and it seems there is not boot from lan on this mainboard, or perhaps i'm blinded. so help me please it is v

ok i have the most recent bios 1.2 now but i still cant find how to activate the boot from lan so please help me.
edit : ok I FOUND !!!
In fact, I had to manually press F11 at boot : then i got a "boot menu" in which I have been able to choose legacy network.
only after i had done this, I can acces the function in the bios (boot sequence) and validate it .
hope it will help

Similar Messages

K8n neo4 boot problems ...please help!!

Heres my specs:
amd 64 venice 3200+
gigabyte 6600GT
seagate SATA 200gb
2x 512 OCZ ram
stock PSU
I just added a Thermaltake Big Typhoon to replace the stock AMD heatsink. The installation was perfect and at first my pc booted up normaly. I turned it off and put everything together and then i get no post. I had 2 green LEDs at the top 2 red at the bottom AKA the "Decompressing bios image to ram for fast booting" ??? I looked around here for solutions and tried clearing my CMOS, taking out the battery, using only essential compentants, and taking out my graphics card. Unforunatly none of these methods work and I am stuck with a dead PC. I even took off the new heatsink and put on the old stock one to see if it worked but I got the same error. I really don't think it is a mobo or PSU issue because I've had this system for over a year with zero flaws.
PLEASE HELP I've been at this for the past 5 hours with no success

Eeek!
Same thing happened to me with my Thermalright XP90...
Was removing the H/S once & didn't have the thing held down securely & the damned thing popped up and pulled my CPU right out of the locked socket when I released the clips on one side. I had a bent pin too, but I managed to fix it. Scary.
Thermalright really needs to rethink their mounting scheme.
Those things take quite a bit of force to hold down - hopefully you didn't crack a trace on the board while messing with it. That's the biggest fear I have with mine. I'll be chucking my XP90 on my next build for that reason.
I'd try to find a way to test your CPU in another board to see if it still works.

645 Combo Boot Problem

Hi,
Why does my 645 Combo (6737) Motherboard make a siren noise when I turm my computer on?
I have just built a 1.8 Pentium 4 with 512DDR PC2700. 10 gb Fujitsu HDD, 230 Watt power Supply. (Think the power is the prob)
Cheers
Leighroy

Hi,
I found out the answer, dont worry. The CPU Fan was to quiet for the Motherboard to sense it!!! (ARCTIC COOLING 3ghz fan!!) HOW BIZARRE!! Anyway got another fan more expensive though, and the system works now. :D
Cheers :D
Leighroy

645 combo ms-6737 help please

- Bios -
A6737SMS v1.1 011603
- Motherboard -
645 Combo
MS-6737 VER 10
Here's the situation,
Everything has been running great since I've gotten this board a few years ago, then my main drive crapped out with a corrupted partition table.
I've been running agp cards in this beast for a few years now, I'm pretty sure I used version 3 of the live update tool to upgrade the agp drivers on the now dead drive, but honestly don't totally remember, I could have only used the install disk for the agp drivers, but again, pretty sure I used the old version 3 live update.
So now I've got a new driver installed and getting everything back to where it was, all seems to be going well accept for my agp video card. I've have used my original msi utilities and drivers disk for the motherboard agp drivers but that has not not worked, windows XP will not find and recognize my video card (Gigabyte Ati HD 4650 1gb GDDR2). I've tried to install the cards drivers to try and trick XP but I still get nothing.
I'm wondering what I really need to do, the board has been great, has had 3 agp cards in it that have run without a hitch, on the old drive.
Do I need to upgrade the bios? (total noob at this, don't want to do it honestly)
Do I need to just get new msi agp motherboard drivers? (No clue where to get them, the new live update crashes my system, actually had to reinstall XP once because of it, had a boot loop going on after live update crashed)
I'm currently sitting with a clean install of XP Pro SP2 (no updates), have ran the msi utilities & drivers setup which added SiS AGP Drivers, SiS Lan Drivers, AC97 Audio Drivers and SiS USB2.0 Drivers. I've also installed my mouse software as well as Chrome browser and a partition data recovery utility (had to get some data off that crapped out drive). I have not installed my ATi drivers as this did nothing the last time I tried it. To note, I also tried installing the most recent ATi drivers, this also did nothing.
I can and will provide more information if it is required.
Looking for any help, thanks.

I have installed the SiS agp Drivers from the link above as well as the current Ati drivers for my v-card. Still no go. What other chipset drivers do you mean? I have downloaded all drivers from msi's website for my board.
About to do another clean XP SP2 install and start all over again.
Here is a dxdiag of my system, if not the info you wanted, then what do you require?
Code: [Select]
System Information
Time of this report: 2/24/2010, 10:23:53
Machine name: HOME
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: MSI
System Model: MS-6737
BIOS: Version 07.00T
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory: 1024MB RAM
Page File: 95MB used, 2366MB available
Windows Dir: D:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: The system is using the generic video driver. Please install video driver provided by the hardware manufacturer. Direct3D functionality not available. You should verify that the driver is a final version from the hardware manufacturer.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name:
Manufacturer:
Chip type:
DAC type:
Device Key: Enum\
Display Memory: n/a
Current Mode: 1024 x 768 (32 bit) (1Hz)
Monitor:
Monitor Max Res:
Driver Name: vga.dll
Driver Version: 5.01.2600.0000 (English)
DDI Version: unknown
Driver Attributes: Final Retail
Driver Date/Size: 8/23/2001 07:00:00, 9344 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: vga.sys
Mini VDD Date: 8/3/2004 16:07:08, 20992 bytes
Device Identifier: {D7B70EE0-4340-11CF-B063-282AAEC2C835}
Vendor ID: 0x0000
Device ID: 0x0000
SubSys ID: 0x00000000
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Realtek AC97 Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1039&DEV_7012&SUBSYS_73701462&REV_A0
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ALCXWDM.SYS
Driver Version: 5.10.0000.5050 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 1/10/2003 03:34:32, 695852 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 48000
Static/Strm HW Mix Bufs: 17, 16
Static/Strm HW 3D Bufs: 17, 16
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Realtek AC97 Audio
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: ALCXWDM.SYS
Driver Version: 5.10.0000.5050 (English)
Driver Attributes: Final Retail
Date and Size: 1/10/2003 03:34:32, 695852 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: D:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
MPU-401, Hardware (Kernel Mode), Input, No DLS, External
MPU-401, Hardware (Kernel Mode), Output, No DLS, External
Realtek AC97 Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
MPU-401 [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
MPU-401 [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not run
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x1039, 0x7001
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 16:08:44, 57600 bytes
| Driver: usbd.sys, 8/23/2001 07:00:00, 4736 bytes
|
+-+ Logitech Cordless USB Mouse
| | Vendor/Product ID: 0x046D, 0xC501
| | Location: USB Receiver
| | Matching Device ID: usb\vid_046d&pid_c501
| | Service: LHidUsb
| | Driver: LHidUsb.Sys, 9/19/2001 05:11:00, 37822 bytes
| |
| +-+ HID-compliant Cordless Mouse
| | | Vendor/Product ID: 0x046D, 0xC501
| | | Matching Device ID: hid\vid_046d&pid_c501
| | | Lower Filters: LHidFlt2
| | | Service: mouhid
| | | Driver: mouhid.sys, 8/17/2001 13:48:00, 12160 bytes
| | | Driver: mouclass.sys, 8/3/2004 22:58:34, 23040 bytes
| | | Driver: LHidFlt2.sys, 9/19/2001 05:11:00, 22064 bytes
| | | Driver: LMouFlt2.sys, 9/19/2001 05:11:00, 67440 bytes
| | | Driver: LKbdFlt2.sys, 9/19/2001 05:11:00, 5840 bytes
| | | Driver: LCoInst.dll, 9/19/2001 05:11:00, 19182 bytes
Gameport Devices
+ SIS PCI to ISA bridge
| Location: PCI bus 0, device 2, function 0
| Matching Device ID: pci\ven_1039&dev_0008
| Service: isapnp
| Driver: isapnp.sys, 8/23/2001 07:00:00, 35840 bytes
|
+-+ Standard Game Port
| | Matching Device ID: *pnpb02f
| | Service: gameenum
| | Driver: gameenum.sys, 8/3/2004 18:05:44, 10624 bytes
PS/2 Devices
+ PC/AT Enhanced PS/2 Keyboard (101/102-Key)
| Matching Device ID: *pnp030b
| Service: i8042prt
| Driver: i8042prt.sys, 8/3/2004 16:14:38, 52736 bytes
| Driver: kbdclass.sys, 8/3/2004 15:58:34, 24576 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:01:08, 40840 bytes
| Driver: kbdclass.sys, 8/3/2004 15:58:34, 24576 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:01:08, 40840 bytes
| Driver: mouclass.sys, 8/3/2004 22:58:34, 23040 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 Serial Service Provider: COM2
DirectPlay8 TCP/IP Service Provider: Local Area Connection - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: D:
Free Space: 296.0 GB
Total Space: 476.9 GB
File System: NTFS
Model: WDC WD5000AAKB-00H8A0
Drive: E:
Model: Optiarc DVD RW AD-7200A
Driver: d:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (English), 8/3/2004 15:59:54, 49536 bytes
System Devices
Name: Realtek AC'97 Audio
Device ID: PCI\VEN_1039&DEV_7012&SUBSYS_73701462&REV_A0\3&61AAA01&0&17
Driver: D:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (English), 8/4/2004 00:56:44, 4096 bytes
Driver: D:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (English), 8/4/2004 00:56:58, 130048 bytes
Driver: D:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (English), 8/3/2004 18:05:44, 140928 bytes
Driver: D:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 60288 bytes
Driver: D:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 145792 bytes
Driver: D:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (English), 8/3/2004 18:05:44, 48640 bytes
Driver: D:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 23552 bytes
Driver: D:\WINDOWS\system32\drivers\ALCXWDM.SYS, 5.10.0000.5050 (English), 1/10/2003 03:34:32, 695852 bytes
Driver: D:\WINDOWS\SOUNDMAN.EXE, 5.00.0000.0016 (English), 1/7/2003 05:09:54, 46592 bytes
Driver: D:\WINDOWS\system32\ALSNDMGR.CPL, 1.05.0000.0063 (English), 1/10/2003 13:20:24, 1607168 bytes
Driver: D:\WINDOWS\system32\ALSNDMGR.WAV, 2/5/2002 00:54:58, 141016 bytes
Driver: D:\WINDOWS\system\crlds3d.dll, 4.12.0001.2002 (English), 11/21/2002 02:07:10, 765952 bytes
Driver: D:\WINDOWS\system32\a3d.dll, 4.12.0001.2008 (English), 8/27/2002 03:23:22, 720896 bytes
Driver: D:\WINDOWS\system32\Audio3D.dll, 4.12.0001.2008 (English), 8/27/2002 03:23:22, 720896 bytes
Name: SiS PCI to USB Enhanced Host Controller
Device ID: PCI\VEN_1039&DEV_7002&SUBSYS_54701462&REV_00\3&61AAA01&0&1B
Driver: D:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:38, 26624 bytes
Driver: D:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 142976 bytes
Driver: D:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 74240 bytes
Driver: D:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 57600 bytes
Driver: D:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/3/2004 17:56:44, 7168 bytes
Name: SiS 7001 PCI to USB Open Host Controller
Device ID: PCI\VEN_1039&DEV_7001&SUBSYS_73701462&REV_0F\3&61AAA01&0&1A
Driver: D:\WINDOWS\system32\drivers\usbohci.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:38, 17024 bytes
Driver: D:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 142976 bytes
Driver: D:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 74240 bytes
Driver: D:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 57600 bytes
Name: SiS 7001 PCI to USB Open Host Controller
Device ID: PCI\VEN_1039&DEV_7001&SUBSYS_73701462&REV_0F\3&61AAA01&0&19
Driver: D:\WINDOWS\system32\drivers\usbohci.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:38, 17024 bytes
Driver: D:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 142976 bytes
Driver: D:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 74240 bytes
Driver: D:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 57600 bytes
Name: SiS 7001 PCI to USB Open Host Controller
Device ID: PCI\VEN_1039&DEV_7001&SUBSYS_73701462&REV_0F\3&61AAA01&0&18
Driver: D:\WINDOWS\system32\drivers\usbohci.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:38, 17024 bytes
Driver: D:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 142976 bytes
Driver: D:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (English), 8/3/2004 18:05:44, 74240 bytes
Driver: D:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 16:08:44, 57600 bytes
Name: SiS PCI IDE Controller
Device ID: PCI\VEN_1039&DEV_5513&SUBSYS_55131039&REV_00\3&61AAA01&0&15
Driver: D:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (English), 8/3/2004 15:59:42, 25088 bytes
Driver: D:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 15:59:44, 95360 bytes
Driver: D:\WINDOWS\system32\DRIVERS\pciide.sys, 5.01.2600.0000 (English), 8/23/2001 07:00:00, 3328 bytes
Name: SiS 900-Based PCI Fast Ethernet Adapter
Device ID: PCI\VEN_1039&DEV_0900&SUBSYS_73701462&REV_90\3&61AAA01&0&20
Driver: D:\WINDOWS\system32\DRIVERS\sisnic.sys, 1.16.0000.0000 (English), 7/10/2002 10:39:34, 32256 bytes
Driver: D:\Progra~1\SiSLan\uninst.exe, 5.01.2413.0001 (English), 8/6/2001 21:53:18, 37376 bytes
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1039&DEV_0645&SUBSYS_00000000&REV_02\3&61AAA01&0&00
Driver: n/a
Name: SIS PCI to ISA bridge
Device ID: PCI\VEN_1039&DEV_0008&SUBSYS_00000000&REV_04\3&61AAA01&0&10
Driver: D:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (English), 8/23/2001 07:00:00, 35840 bytes
Name: SiS Accelerated Graphics Port
Device ID: PCI\VEN_1039&DEV_0001&SUBSYS_00000000&REV_00\3&61AAA01&0&08
Driver: D:\WINDOWS\system32\DRIVERS\SISAGPX.SYS, 7.02.0000.1130 (English), 10/30/2002 22:58:42, 30848 bytes
Name: PCI Device
Device ID: PCI\VEN_1002&DEV_AA38&SUBSYS_AA381458&REV_00\4&3525EC23&0&0108
Driver: n/a
Name: Video Controller (VGA Compatible)
Device ID: PCI\VEN_1002&DEV_9495&SUBSYS_00281458&REV_00\4&3525EC23&0&0008
Driver: n/a
DirectX Components
ddraw.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 266240 bytes
ddrawex.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 27136 bytes
dxapi.sys: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 10496 bytes
d3d8.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:42 1179648 bytes
d3d8thk.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:42 8192 bytes
d3d9.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:42 1689088 bytes
d3dim.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 436224 bytes
d3dim700.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:42 825344 bytes
d3dramp.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 590336 bytes
d3drm.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 350208 bytes
d3dxof.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 47616 bytes
d3dpmesh.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 34816 bytes
dplay.dll: 5.00.2134.0001 English Final Retail 8/23/2001 07:00:00 33040 bytes
dplayx.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 229888 bytes
dpmodemx.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 23552 bytes
dpwsock.dll: 5.00.2134.0001 English Final Retail 8/23/2001 07:00:00 42768 bytes
dpwsockx.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 57344 bytes
dplaysvr.exe: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:50 30208 bytes
dpnsvr.exe: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:50 18432 bytes
dpnet.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 375296 bytes
dpnlobby.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:04 3584 bytes
dpnaddr.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:04 3584 bytes
dpvoice.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 212480 bytes
dpvsetup.exe: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:50 83456 bytes
dpvvox.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 116736 bytes
dpvacm.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 21504 bytes
dpnhpast.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 35328 bytes
dpnhupnp.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 60928 bytes
dpserial.dll: 5.00.2134.0001 English Final Retail 8/23/2001 07:00:00 53520 bytes
dinput.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 159232 bytes
dinput8.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 181760 bytes
dimap.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 44032 bytes
diactfrm.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 394240 bytes
joy.cpl: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:58 68608 bytes
gcdef.dll: 5.01.2600.0000 English Final Retail 8/23/2001 07:00:00 76800 bytes
pid.dll: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 35328 bytes
gameenum.sys: 5.01.2600.2180 English Final Retail 8/3/2004 18:05:44 10624 bytes
dsound.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 367616 bytes
dsound3d.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 1294336 bytes
dswave.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 19456 bytes
dsdmo.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 181760 bytes
dsdmoprp.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 71680 bytes
dmusic.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 104448 bytes
dmband.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 28672 bytes
dmcompos.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 61440 bytes
dmime.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 181248 bytes
dmloader.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 35840 bytes
dmstyle.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 105984 bytes
dmsynth.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 103424 bytes
dmscript.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 82432 bytes
dx7vb.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 619008 bytes
dx8vb.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 1227264 bytes
dxdiagn.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 2113536 bytes
mfc40.dll: 4.01.0000.6140 English Final Retail 8/23/2001 07:00:00 924432 bytes
mfc42.dll: 6.02.4131.0000 English Final Retail 8/3/2004 17:56:44 1028096 bytes
wsock32.dll: 5.01.2600.2180 English Final Retail 8/3/2004 17:56:48 22528 bytes
amstream.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:42 70656 bytes
devenum.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:44 59904 bytes
dxmasf.dll: 6.04.0009.1125 English Final Retail 8/3/2004 17:56:44 498205 bytes
mciqtz32.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:44 35328 bytes
mpg2splt.ax: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:58 148992 bytes
msdmo.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:44 14336 bytes
encapi.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:44 20480 bytes
qasf.dll: 9.00.0000.3250 English Final Retail 8/3/2004 17:56:46 237568 bytes
qcap.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:46 192512 bytes
qdv.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:46 279040 bytes
qdvd.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:46 385024 bytes
qedit.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:46 562176 bytes
qedwipes.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:26 733696 bytes
quartz.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:46 1287680 bytes
strmdll.dll: 4.01.0000.3928 English Final Retail 8/3/2004 17:56:46 246302 bytes
iac25_32.ax: 2.00.0005.0053 English Final Retail 8/3/2004 17:56:58 199680 bytes
ir41_32.ax: 4.51.0016.0003 English Final Retail 8/3/2004 17:56:58 848384 bytes
ir41_qc.dll: 4.30.0062.0002 English Final Retail 8/3/2004 17:56:44 120320 bytes
ir41_qcx.dll: 4.30.0064.0001 English Final Retail 8/3/2004 17:56:44 338432 bytes
ir50_32.dll: 5.2562.0015.0055 English Final Retail 8/3/2004 17:56:44 755200 bytes
ir50_qc.dll: 5.00.0063.0048 English Final Retail 8/3/2004 17:56:44 200192 bytes
ir50_qcx.dll: 5.00.0064.0048 English Final Retail 8/3/2004 17:56:44 183808 bytes
ivfsrc.ax: 5.10.0002.0051 English Final Retail 8/3/2004 17:56:58 154624 bytes
mswebdvd.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:46 204288 bytes
ks.sys: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 140928 bytes
ksproxy.ax: 5.03.2600.2180 English Final Retail 8/4/2004 00:56:58 130048 bytes
ksuser.dll: 5.03.2600.2180 English Final Retail 8/4/2004 00:56:44 4096 bytes
stream.sys: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 48640 bytes
mspclock.sys: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 5376 bytes
mspqm.sys: 5.01.2600.2180 English Final Retail 8/3/2004 18:05:44 4992 bytes
mskssrv.sys: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 7552 bytes
swenum.sys: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 4352 bytes
mpeg2data.ax: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:58 118272 bytes
msvidctl.dll: 6.05.2600.2180 English Final Retail 8/3/2004 17:56:44 1428480 bytes
vbisurf.ax: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:58 30720 bytes
msyuv.dll: 5.03.2600.2180 English Final Retail 8/3/2004 18:05:44 17408 bytes
wstdecod.dll: 5.03.2600.2180 English Final Retail 8/3/2004 17:56:48 50688 bytes
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,,
WMSpeech Decoder DMO,0x00600800,1,1,,
Mpeg4s Decoder DMO,0x00800001,1,1,,
WMV Screen decoder DMO,0x00800001,1,1,,
WMVideo Decoder DMO,0x00800001,1,1,,
Mpeg43 Decoder DMO,0x00800001,1,1,,
Mpeg4 Decoder DMO,0x00800001,1,1,,
WMT MuxDeMux Filter,0x00200000,0,0,wmm2filt.dll,2.01.4026.0000
Full Screen Renderer,0x00200000,1,0,quartz.dll,6.05.2600.2180
DV Muxer,0x00400000,0,0,qdv.dll,6.05.2600.2180
Color Space Converter,0x00400001,1,1,quartz.dll,6.05.2600.2180
WM ASF Reader,0x00400000,0,0,qasf.dll,9.00.0000.3250
AVI Splitter,0x00600000,1,1,quartz.dll,6.05.2600.2180
WMT AudioAnalyzer,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.05.2600.2180
Indeo® video 5.10 Compression Filter,0x00200000,1,1,ir50_32.dll,5.2562.0015.0055
Windows Media Audio Decoder,0x00800001,1,1,msadds32.ax,8.00.0000.4487
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.05.2600.2180
WMT Format Conversion,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
StreamBufferSink,0x00200000,0,0,sbe.dll,6.05.2600.2180
WMT Black Frame Generator,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.05.2600.2180
Indeo® video 5.10 Decompression Filter,0x00640000,1,1,ir50_32.dll,5.2562.0015.0055
WMT Screen Capture filter,0x00200000,0,1,wmm2filt.dll,2.01.4026.0000
Microsoft Screen Video Decompressor,0x00800000,1,1,msscds32.ax,8.00.0000.4487
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.05.2600.2180
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.05.2600.2180
MPEG Layer-3 Decoder,0x00810000,1,1,l3codecx.ax,1.05.0000.0050
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.05.2600.2180
ACELP.net Sipro Lab Audio Decoder,0x00800001,1,1,acelpdec.ax,1.04.0000.0000
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.05.2600.2180
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.05.2600.2180
File Source (Netshow URL),0x00400000,0,1,wmpasf.dll,9.00.0000.3250
WMT Import Filter,0x00200000,0,1,wmm2filt.dll,2.01.4026.0000
DV Splitter,0x00600000,1,2,qdv.dll,6.05.2600.2180
Bitmap Generate,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
Windows Media Video Decoder,0x00800000,1,1,wmvds32.ax,8.00.0000.4487
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.05.2600.2180
Windows Media Video Decoder,0x00800000,1,1,wmv8ds32.ax,8.00.0000.4000
WMT VIH2 Fix,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
Record Queue,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
Windows Media Multiplexer,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASX file Parser,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASX v.2 file Parser,0x00600000,1,0,wmpasf.dll,9.00.0000.3250
NSC file Parser,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ACM Wrapper,0x00600000,1,1,quartz.dll,6.05.2600.2180
Windows Media source filter,0x00600000,0,2,wmpasf.dll,9.00.0000.3250
Video Renderer,0x00800001,1,0,quartz.dll,6.05.2600.2180
Frame Eater,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.05.2600.2180
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.05.2600.2180
Video Port Manager,0x00600000,2,1,quartz.dll,6.05.2600.2180
WST Decoder,0x00600000,1,1,wstdecod.dll,5.03.2600.2180
Video Renderer,0x00400000,1,0,quartz.dll,6.05.2600.2180
WM ASF Writer,0x00400000,0,0,qasf.dll,9.00.0000.3250
WMT Sample Information Filter,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,5.03.2600.2180
Microsoft MPEG-4 Video Decompressor,0x00800000,1,1,mpg4ds32.ax,8.00.0000.4487
File writer,0x00200000,1,0,qcap.dll,6.05.2600.2180
WMT Log Filter,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
WMT Virtual Renderer,0x00200000,1,0,wmm2filt.dll,2.01.4026.0000
DVD Navigator,0x00200000,0,2,qdvd.dll,6.05.2600.2180
Overlay Mixer2,0x00400000,1,1,qdvd.dll,6.05.2600.2180
AVI Draw,0x00600064,9,1,quartz.dll,6.05.2600.2180
.RAM file Parser,0x00600000,1,0,wmpasf.dll,9.00.0000.3250
WMT DirectX Transform Wrapper,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
G.711 Codec,0x00200000,1,1,g711codc.ax,5.01.2600.0000
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.05.2600.2180
DV Video Decoder,0x00800000,1,1,qdv.dll,6.05.2600.2180
Indeo® audio software,0x00500000,1,1,iac25_32.ax,2.00.0005.0053
Windows Media Update Filter,0x00400000,1,0,wmpasf.dll,9.00.0000.3250
ASF DIB Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASF ACM Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASF ICM Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASF URL Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASF JPEG Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASF DJPEG Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
ASF embedded stuff Handler,0x00600000,1,1,wmpasf.dll,9.00.0000.3250
9x8Resize,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
WIA Stream Snapshot Filter,0x00200000,1,1,wiasf.ax,1.00.0000.0000
Allocator Fix,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
SampleGrabber,0x00200000,1,1,qedit.dll,6.05.2600.2180
Null Renderer,0x00200000,1,0,qedit.dll,6.05.2600.2180
WMT Virtual Source,0x00200000,0,1,wmm2filt.dll,2.01.4026.0000
IVF source filter,0x00600000,0,1,ivfsrc.ax,5.10.0002.0051
WMT Interlacer,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
StreamBufferSource,0x00200000,0,0,sbe.dll,6.05.2600.2180
Smart Tee,0x00200000,1,2,qcap.dll,6.05.2600.2180
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.05.2600.2180
AVI Decompressor,0x00600000,1,1,quartz.dll,6.05.2600.2180
Uncompressed Domain Shot Detection Filter,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.05.2600.2180
QuickTime Movie Parser,0x00600000,1,1,quartz.dll,6.05.2600.2180
Wave Parser,0x00400000,1,1,quartz.dll,6.05.2600.2180
MIDI Parser,0x00400000,1,1,quartz.dll,6.05.2600.2180
Multi-file Parser,0x00400000,1,1,quartz.dll,6.05.2600.2180
File stream renderer,0x00400000,1,1,quartz.dll,6.05.2600.2180
XML Playlist,0x00400000,1,0,wmpasf.dll,9.00.0000.3250
AVI Mux,0x00200000,1,0,qcap.dll,6.05.2600.2180
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.05.2600.2180
File Source (Async.),0x00400000,0,1,quartz.dll,6.05.2600.2180
File Source (URL),0x00400000,0,1,quartz.dll,6.05.2600.2180
WMT DV Extract,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
WMT Switch Filter,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
WMT Volume,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
Stretch Video,0x00200000,1,1,wmm2filt.dll,2.01.4026.0000
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.05.2600.2180
QT Decompressor,0x00600000,1,1,quartz.dll,6.05.2600.2180
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.05.2600.2180
Indeo® video 4.4 Decompression Filter,0x00640000,1,1,ir41_32.ax,4.51.0016.0003
Indeo® video 4.4 Compression Filter,0x00200000,1,1,ir41_32.ax,4.51.0016.0003
WDM Streaming Data Transforms:
Microsoft Kernel Acoustic Echo Canceller,0x00000000,0,0,,
Microsoft Kernel GS Wavetable Synthesizer,0x00200000,1,1,,5.03.2600.2180
Microsoft Kernel DLS Synthesizer,0x00200000,1,1,,5.03.2600.2180
Microsoft Kernel DRM Audio Descrambler,0x00200000,1,1,,5.03.2600.2180
Video Compressors:
MSScreen encoder DMO,0x00600800,1,1,,
WMVideo9 Encoder DMO,0x00600800,1,1,,
MSScreen 9 encoder DMO,0x00600800,1,1,,
DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.2600.2180
Indeo® video 5.10 Compression Filter,0x00100000,1,1,ir50_32.dll,5.2562.0015.0055
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.2600.2180
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.05.2600.2180
Intel 4:2:0 Video V2.50,0x00200000,1,1,qcap.dll,6.05.2600.2180
Intel Indeo(R) Video R3.2,0x00200000,1,1,qcap.dll,6.05.2600.2180
Intel Indeo® Video 4.5,0x00200000,1,1,qcap.dll,6.05.2600.2180
Indeo® video 5.10,0x00200000,1,1,qcap.dll,6.05.2600.2180
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.05.2600.2180
Microsoft H.261 Video Codec,0x00200000,1,1,qcap.dll,6.05.2600.2180
Microsoft H.263 Video Codec,0x00200000,1,1,qcap.dll,6.05.2600.2180
Microsoft RLE,0x00200000,1,1,qcap.dll,6.05.2600.2180
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.05.2600.2180
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,,
WMAudio Encoder DMO,0x00600800,1,1,,
IAC2,0x00200000,1,1,quartz.dll,6.05.2600.2180
IMA ADPCM,0x00200000,1,1,quartz.dll,6.05.2600.2180
PCM,0x00200000,1,1,quartz.dll,6.05.2600.2180
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.05.2600.2180
ACELP.net,0x00200000,1,1,quartz.dll,6.05.2600.2180
DSP Group TrueSpeech(TM),0x00200000,1,1,quartz.dll,6.05.2600.2180
Windows Media Audio V1,0x00200000,1,1,quartz.dll,6.05.2600.2180
Windows Media Audio V2,0x00200000,1,1,quartz.dll,6.05.2600.2180
GSM 6.10,0x00200000,1,1,quartz.dll,6.05.2600.2180
Microsoft G.723.1,0x00200000,1,1,quartz.dll,6.05.2600.2180
CCITT A-Law,0x00200000,1,1,quartz.dll,6.05.2600.2180
CCITT u-Law,0x00200000,1,1,quartz.dll,6.05.2600.2180
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.05.2600.2180
Audio Capture Sources:
Realtek AC97 Audio,0x00200000,0,0,qcap.dll,6.05.2600.2180
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.05.2600.2180
Microsoft GS Wavetable SW Synth,0x00200000,1,0,quartz.dll,6.05.2600.2180
MPU-401,0x00200000,1,0,quartz.dll,6.05.2600.2180
WDM Streaming Capture Devices:
,0x00000000,0,0,,
Realtek AC97 Audio,0x00200000,3,3,,5.03.2600.2180
WDM Streaming Rendering Devices:
,0x00000000,0,0,,
Realtek AC97 Audio,0x00200000,3,3,,5.03.2600.2180
WDM Streaming Mixer Devices:
Microsoft Kernel Wave Audio Mixer,0x00000000,0,0,,
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,0,encdec.dll,6.05.2600.2180
Encrypt/Tag,0x00200000,0,0,encdec.dll,6.05.2600.2180
XDS Codec,0x00200000,0,0,encdec.dll,6.05.2600.2180
Audio Renderers:
Realtek AC97 Audio,0x00200000,1,0,quartz.dll,6.05.2600.2180
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.05.2600.2180
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.05.2600.2180
DirectSound: Realtek AC97 Audio,0x00200000,1,0,quartz.dll,6.05.2600.2180
WDM Streaming System Devices:
MPU-401,0x00200000,3,2,,5.03.2600.2180
Realtek AC97 Audio,0x00200000,18,2,,5.03.2600.2180

Cold boot problem with X-FI Fata1ty card... Need serious help!

Hey guys:
I just finished upgrading my computer. Realized that I have a cold boot problem. In order to identify the source of problem. I began the following test.
. Remove everything except, cpu, heatsink, ram, video card. Tried to boot with those devices. => No cold boot problem.
2. Install the rest of the ram sticks (I have 4 x 52 in total). => No cold boot problem.
3. Install the other video card (my setup is 7900gtx in SLI) => No cold boot problem.
4. Install the Creative X-FI Fataty card. => COLD BOOT PROBLEM
Once the computer is shut down via the front power switch on the case, the computer will not boot again. To boot the computer, I need to switch off the main power switch on the back of the psu and switch it back on; then turn on the computer via the front power switch on the case. I tried the problem with and without the sound card. Whenever the sound card is installed. There is the problem. If there is no that sound card in my rig, then there won't be any cold-boot problem.
My rig specs:
DFI Lanparty nF4 SLI-DR Venus
AMD Opteron 65 CCBE 609 - Stock speed
4 x 52 MB G.Skill Samsung TCCD LE 2.85V DDR 400
CPU Cooling - Tuniq tower 20
2 x EVGA 7900 GTX Stock - SLI
3 x WD Raptor 74G RAID-0 SATA (-3) 0000 rpm (System)
x Seagate Barracuda 7200.7 60Gb 7200RPM NCQ SATA - 4 (Backup)
Pioneer Black DVR 0 DVD+/-RW - IDE /0
Lian-li PC-V 200B Plus-2 with little case mod
OCZ GameXstream 600W
Creative Fatalty Sound Card w/ Front Panel
Logitech Z5500 5. speakers
I need serious help. This problem is so annoying.
Tnanks and will greatly appreciate it.Message Edited by White_Hair on 0-27-200605:4 PM

The onboard sound is disabled. Unfortunately I sold the Seasonic PSU to my friend. The OCZ GameXStream is suppose to be the higher grade psu than Seasonic PSU. Also, the cold boot problem only exists if the sound card is plugged to the motherboard. I tried change different pci slot. It doesn't seem to help the problem. Thanks for the reply Message Edited by White_Hair on 2-02-200606:07 AM

MSI 645 Combo on 8X FX5200 AGP

Hi does this MOBO (MSI 645 COmbo) Supoort Geforce FX5200 8X AGP?
It start normally when there's no driver installed on WIN XP. Then I download the latest NVIDIA driver from Nvidia website & installed it then the my PC Hang during bootup. I don't even seen the Starting WIn XP image, I mean the black screen with a Win XP Logo & Blue Line moving.
This is my spec
P4 2.0
MSI 645 Combo
512 Kingston PC2700
MSI Geforce MX440SE / Asus V9520 Magic/T (FX5200) 128MB
400W PowerMax PSU
Intel Network Card
Maxtor 80GB
Is there any incompatible of my hardware or just the Mobo doesn't support it?
Please Help Thanks.

I have a similar problem, in that there is startup screen corruption, and graphics corruption. Granted I'm running WIN98SE so at least it starts. Several restarts and the occasional driver reload get it going, after which it's fine.
I've looked at Ram timings in safe and normal, AGP APERTURE (128), Oveclocking (none used) using the latest 52.16 drivers after using detonator destroyer to get all the sticky bits of code from Nvidiot out, and eventually replaced the card with the previous fan cooled XFX fan cooled 440MX ge4. It runs fine now.
The removed non fan cooled PV-T18K-QTHG GF4 440MX AGP8X 64MB DDR TV card is now in my P3/500 on a Soyo 6BA+ Mobo........where it does the same blessed thing!!!!
Possibly not an MSI problem, but an old driver removal/ conflict issue.
I've asked MSI tech support, and XFX tech support for a clue, but no replies yet.
I've also asked CCL computers, who supply all me bits for a clue. Just sent tonight.
If I get an answer, I'll post.
You have my sympathy.
regards,
Bill

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

1st series iMac G5: Booting problems, kernel panics, waking from sleep...

Specifications of the iMac described: 1.8 Ghz, 1GB, 80GB, 64 Mb Nvidia VRAM, Airport, 10.5.5
Back in August 2004 my dad bought us kids an iMac G5 for ‘family use’. It had a fresh install of 10.3.5 on it and compared to the (1999) iMac G3 it replaced it was amazingly fast.
The iMac never showed any signs of probable issues, until we decided to upgrade to Leopard in January 2008. Initially, this upgrade was only meant to be able to sync with the latest iPod nano (who demanded a newer version of iTunes).
After the installation the first thing I noticed was a high CPU usage, the machine seemed slower than ever and that with 1 Gb of RAM (the minimum sys. req. for Leopard are 512 Mb of RAM). Anyway, then the real thing started, it wouldn’t turn on anymore. We brought it to an Authorized Apple Reseller, the Tech department said the Logic board had failed. The costs of the fix weren’t the worth the computer anymore, so...end of story. The iMac was indeed one of the bad series, although it hadn’t any swollen capacitors.
My dad already made up his mind and bought himself a Macbook. He then told me that if I was able to get the broken iMac fixed, I could keep it. And so, I bought an ‘as-is’ logic board on Ebay. Last weekend I installed it, and it actually seemed to work! Yet, the problems are during the startup: the first thing I see is a screen full with horizontal lines flickering all the time, like an old TV with bad signal. Mostly it won’t boot and I get the message to restart the computer (kernel panic, I got dozens of logs already!). Sometimes it got stuck during booting (grey apple screen with gear in the middle) making the fans go crazy (after a while) and sounding what others describe as a ‘jetliner taking off’ sound. Sometimes the screen remains black. Generally it takes me 5 to 10 minutes to start up properly. Maybe it’s just me but it seems like when the computer has warmed up a little (by turning on and off on and on) starting up gets smoother. I mean the startup screen suffers from less horizontal flickering lines.
During the use of Leopard, I again get high CPU usage, especially when I use multiple programs at the same time, or when starting multiple programs. My iStat Pro said once that the fans were running at 4700 rpm and the heat of the CPU was about 70 Celsius. If I really want to **** my iMac off I should play a racing game. That just totally freaks him out! These problems could probably be solved by adding more RAM. Right?
The iMac also has a sleep problem. Sometimes after lets say an hour or so, you can’t get it out of sleep mode (by manipulating keyboard and/or mouse, the sleep light stops, but the screen stays off --> only solution is to restart). What happened to me once was that it slept so long that it just got into a deep sleep by turning itself off completely!
Here’s a list of what I tried so far:
- Disk Utility: Resetting the permissions, no problems were found.
- Resetting the SMU, both on the logic board itself as by pressing the power button 5 - 8 seconds, no improvements.
- Resetting the PRAM, no improvements.
- Did the Hardware test of the original install CD, nothing was found, all good.
- Did Archive and Instal, this actually messed my system entirely, cause it wouldn't boot at all and when starting up from the Leopard installation DVD it wouldn't recognize the Macintosh HD.
- Did Archive and Instal with the original disks, this disk did recognize Macintosh HD and so I installed the original system, 10.3. Booting problems and those flickering lines are still there though.
Next phase will be erase and install, but first I want to know what you guys think about all this.
Oh eh, One more thing; The guys at Applecare (phone support) told me that the replaced logic board was also out of warranty and so they couldn’t help me. But as the man on the phone was kind, he told me to go look for a special ‘driver’ on the net. He said that the driver should be able to resolve some of the issues described. He said that I had to give in the name of the LB on google and look for results. Is this bogus? Because I haven’t found anything useful on google so far. What’s the name (rather than a number) of the LB in the first place?
I hope you guys can give me some answers. I'm kinda desperate. But I still feel there's hope...

The symptoms of a flakey power supply are sleep problems and you have done all the right things as far as resetting the SMU and PRAM. Your CPU usage can be tracked by going to Utilities>Activity Monitor - look and see what is hogging the memory. The flickering lines could also be an optical system going south.
The other thing you can do is run DiskWarrior or TechToolPro to see if you have corrupted directories. Preferential Treatment will let you check for corrupted preferences.

MSI P45 Neo-f with intermittent boot problems

Current system:
*CPU: Intel core2duo 4300 1,80GHz
Mobo: MSI P45 Neo-F LGA775
*Memory: 1 Kingston 1GB PC2-5300 667MHz DDR2 and 1 Dane-Elec 1GB PC2-5300 667MHz DDR2
Videocard: Club3D Nvidia 8800GT 512MB GDDR3
*Hard drive: 120GB IBM deskstar 7200rpm Ultra-ATA/100 (yes I realize it is known as the deathstar, but it hasn't failed so far, I do back-up because I'm paranoid
PSU: Real Silent Nexus NX-5000 500 watt
*Soundcard: Soundblaster Audigy
OS: Windows XP home, service pack 2
*Lite-on IT dvd-rom drive
*floppy disk drive
I also have 3 case fans spinning away in a marginally large Chieftec Dragon tower.
The parts I marked with an asterisk (*) are parts that I removed from my old rig and re-used.
I'll try to give a clear rundown of my problem and the steps I've taken so far.
3 days ago I acquired the P45 Neo and installed it into my system, together with the 8800GT videocard. I was still using my old PSU, a Chieftec 360watt. This PSU served me well for 7 years, but it was starting to build up noise while trying to keep up games on my old rig.
I had some trouble getting the system to boot, I tried changing some of the 4 pins wires going to the hard drive and the dvd drive. I don't know if it was luck or if I managed to divide the load properly for the system to boot. But I succeeded into booting up, got into the bios and eventually installed WinXP.
As soon as it was time to install the videocard drivers, it stopped responding. I assumed it was a power issue, since I could only install the 20pin and 4pin cpu, but my Chieftec PSU didn't have a 24pin plug to the mobo - and it needed replacing anyway! So I bought a new 500watt PSU that had all the required plugs and more wattage.
I installed the new PSU, checked every connection and pressed the power button. 'Lo and behold, the computer starts up. I install the videocard drivers and it proceeds with no problems. I try to install the soundcard, but the cd says I don't have one installed. I fix that by going to the System list and install the drivers from there. I install a firewall. By then I have successfully rebooted the computer 3 or 4 times. I decide all is well and turn off the computer. But I realize I wanted to check up something on the internet.
I press the powerbutton. The PC power light go up for just a fraction of a second. I can see the blue LED of one of the case fans switching on just as briefly - then it goes out. The computer keeps trying to turn itself on. It looks like it's hickupping to try and boot!
I turn off the PSU power on the back-side because the computer keeps trying and wait for a bit. After 10 minutes, it still doesn't work. I leave the computer for a bit and return an hour later. The computer then starts up with no problems. I turn it off after a few hours, do a reset, start it up, no problems. But then the next day it happens again.
It's pretty tough figuring out what the problem is because it looks..almost random. I considered it could be a heat issue, but sometimes it *does* start up just after it's been turned down. Checking the bios shows no strange temperature shifts.
Hope anyone can help me, because I do not want to go back to my old Asrock mobo

While powered down I cleared the cmos data, removed the Dane Elec DDR2 module and set the bios to optimized defaults. Computer restarted to WinXP with no problems (it has been off the whole night). I shut down WinXP, wait a few moments and then turn the computer back on. Alas, it won't start and starts hick-upping. I turn power off at the PSU again, so it stops.
Now I try switching out the Kingston module instead. By now the computer has been off for 10 min (while I write this entry on laptop). I press the power button on the PSU and then the power button on the front. There is a short pause, lasting a second. The computer turns on, longer now, but it only lasts 2 whole seconds before it turns off again and goes on again (I believe now you can call it powercycling). It repeats this process until I shut off the PSU.
I check to see if I have installed it properly and try again but it starts powercycling again.
15 min pass, I put the Kingston module back in, press the power button and voila, this time it does start. WinXP shows up, no problems. I leave it on for a bit and then shut down. And when I press the power button again - the feeling of dread returns, when it starts hickupping again.
I'm going to see if I can install one of the memory modules from my housemate. Then hopefully tommorrow, I'm going to try if I can test a different PSU, since I see someone else on the forum - who recently posted, has the exact same power supply and also has boot problems, coincidence... or not ^^;.

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Windows 8.1 pro boot problems

I upgraded my OS on a hp pavilion g6-1d73us from windows 7 home premium to windows 8.1 pro and ever since I have had boot problems. I took all the software off since I thought that might be the problem but the boot problems persist. The computer's self diagnosis helps but I still have problems. Is my laptop incompatible with windows 8.1? Windows 8.1 was a download and I still have recovery disks for windows 7. I originally thought the problem was incompatible software but now I am not sure.

Hi @hifive11 ,
Thank you for visiting the HP Support Forums and Welcome. I am glad you have recovery disks for windows 7, smart thinking. I have looked into your issue about your HP Pavilion g6-1d73us Notebook and having issues with the Windows upgrade to 8.1. Here is a link to the drivers page for your product. I do notice there are drivers for Windows 8.The Updates you need for the system are the Chipset. These are located on the driver page link above.
One of the things that can cause an issue is things connected USB. The computer can not load the drivers so it causes an issue. Once the machine is up to date then return the USB devices.
Then I recommended to restore the BIOS to factory defaults.Here is a link to restore the BIOS.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
Please note remove any and all USB devices. Disconnect all non-essential devices.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Server will not boot after update !! Help needed fast !!

I have a new (Aug 2005) XServe G5, running 4.3.
Active Directory integrated, stores home folders (AFP), manages preferences and 5 print queues for 55 Mac OS X.4.3 clients and 200 users.
It downloaded the 4.4 update, unchecked the OS 4.4 update (I think was my first mistake), restarted. Now, at boot up, about the moment the apple would appear (maybe it appears for a split second) all I get is the ugly not sign.
-- Am able to boot to external firewire drive
-- Drive shows as boot option
-- Disk repair reported no problems to fix
-- Can not find any log entries after last shut down. No service ever starts for any entries to be made.
-- Applied the 4.4 update successfully while booted from external fw drive, no effect. Startup disk reports system to be OS X Server 4.4 and lists as a boot option.
-- Drive behaves same when transferred to my G5 tower: big not sign.
What other steps can I do to troubleshoot this boot problem? If I don't get this server up this weekend, I'll get roasted by an angry mob.
Any suggestions are welcomed and greatly appreciated.

Eeh...
Always clone the existing system prior to updating it. Do so when the server is not in use, shut off services where possible (you want it to be as quiescent as possible).
Mike Bombich (at Apple) describes how you can do this via the command-line, which I prefer for this purpose (you can stagger the process):
http://www.bombich.com/mactips/image.html
Now then:
Have you booted from the install CD and used Disk Utility to run Repair Permissions ? That should be your first step.
It may change nothing, but can you boot into Safe mode ? Hold down the Shift key at powerup and keep holding it until you see: "Safe boot"
If you CAN get it booted in that state, then run the 10.4.4 COMBO updater
you need to run the combo updater at this point. After doing so, use Disk Utility to run repair permissions on the boot drive itself, and then reboot.
Otherwise, start it in Target Disk Mode as you did before, connect it to a unit running 10.4.4, and run the /combo/ 10.4.4 Server updator (NOT client, of course) onto the server's mounted hard drive.
I'm not sure you can do this while running 10.4.x client. You may need to do a quick install of 10.4 server (say onto a Firewire drive), boot your spare Mac from it, and -then- mount the server via Firewire target mode, and apply the 10.4.4 server combo updater.
Good luck !

Mac Pro Boot Problems After 10.6.2 Update

After installing the latest version of snow leopard I am now having boot problems on my mac pro.
Symptoms;
-Screen resolution is incorrect at apple splash screen.
-Takes a lot longer than usual to boot.
-Once booted the blue tooth magic mouse isn't imediately reckonised, takes a while to find that.
-Once the mouse is finally reckonised it can move around but can't click on anything or bring up the dock. Tried a wired mouse, had the same problem.
-The keyboard is also not appearing to do anything, none of the shortcuts or quick keys work..
Had exactly the same problem after 3 restarts but on the 4th after leaving it for a good 20-30minutes it setled down and everything was working okay. However this is a recurring problem as I had the same thing yesterday...
I have a my 10.5.8 system backed up on an external so I am running from that at the moment. Don't want to go back to snowy til these problems are solved.
Any help will be greatly appreciated!
Martin

Try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
Let us know.
-mj

Booting Problems

Booting Problems
Help !! my new K8N does not boot from Hard Disk (sorry for very bad english)
My bios detect
Ide Primary MAster : Maxtor 40 Gb -34098H4 5400 rpm Ultra-ATA/100
Ide Primary Slave : ---
Ide Secondary Master : Seagate 120 gb Barracuda - st3120026a 7200 rpm
Ide Secondary Slave : CD-Rom Sony
1st/2nd/3rd Boot Device :Floppy / CD-ROM / Hard Drive
I Format my first partition in NTFS (maxtor) installing XP then not Boot from my hard disk ...only boot from my bootable Xp CD
When i boot up it says
"Verifying DMI Pool Data ..........
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
Finally work!! ...but only work if I turn off Secondary Master & Slave in Bios ==> (NONE)
I change my the IDE HDD cable , jumpers , etc
The memory works good in my old PC (athlon 2.0 hs -MSI k4 ultra)
any suggestion , idea or opinion ? Thanks
CPU AMD Athlon™ 64 Processor 3200+ Newcastle
BIOS Award Phoenix - AwardBIOS v6.00PG
BIOS Award W7030NMS V1.4 082604
MSI K8N Neo Platinum (nVIDIA nForce3-S, AMD Hammer)
Soundblaster Live 5.1
Font Vitsuba Vtx-45-C (450 w)
ATI Radeon 9600 XT 128 mb (RV360) (Asus A9600XT) Internal DAC(400MHz)
Samsung SyncMaster 905DF(X)/955DF(X)/MagicSyncMaster CD195A
Microsoft Windows XP Professional V5.1.2600 (WinXP Retail)
Service Pack 1
DIMM 1
Module Name SMT-OF-AMERICA
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
DIMM 2
Memory Module Properties
Module Name SpecTek
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us)
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 100 MHz 2.0-2-2-5 (CL-RCD-RP-RAS)

hi Dzal,
1) Change
1st/2nd/3rd Boot Device :Floppy / CD-ROM / Hard Drive
1st/2nd/3rd Boot Device :Floppy / Hard Drive / CD-ROM
2) Bios
Advanced bios:
Hard Disk Boot Order
1st Maxtor 40 Gb -34098H4 5400 rpm Ultra-ATA/100
2nd Seagate 120 gb Barracuda - st3120026a 7200 rpm
if no [Pageup] [Pagedown] until Maxtor 40 Gb -34098H4 5400 rpm Ultra-ATA/100 top
save & exit
good luck

A very strange boot problem not yet found in the User Forums

Hi
I know you guys are fed up with all the booting problems, but this one is the strangest one I've yet come across.
I'm putting a PC together to function as an extra render for my 3D animations. Here is the specs as follows.
865PE Neo2-P Mobo
Intel Pentium 4 2.8GHz Processor
2 x 256 DDR 400MHz Memory modules (two of the exact same make and model)
300w PSU
60GB HDD Maxdor
nVidia nForce 5600
here is the problem.
It goes past the post, but then the system stops there. It does not go to boot at all.
In the top of the screen below the memory testing and above the HDD and DVD Ram listings it displays as follows:
DEL -> Bios, F12 - Boot Menu etc.
when i press any of keys listed there, that line changes accordingly to the function I selected.
I can get into the BIOS.
But the Motherboard does not boot any further, it just stays there.
I tried diffrent memory, CPU, Powersupply etc, but to no avail.
(I disabled the QUICK BOOT options to see what problems it may give, but it lists none what so ever.)
On the motherboard, where the DIMM2 starts and the MSI CoreCell chip, to above the IDE1 connector to the full length of the IDE connectors, it looks like the transistors/chips connections has a kind of plaque, it does not shine like the rest. Could that be the problem? How can I clean it?
Please help, this is sort of urgent!!!!!!

Disconnect hard & optical drives........
Power up system.
Do you still have freeze on post? (Start up)
I would also concur with Bas, 300w psu no go.
Intel P4 478 2.4 and above Northwood processors are very power hungry. You would be advise to look for PSU with at least 24amps on the +12V rail....... (Enermax 465 and some 365's or the new Corsair VX 450)

Boot problem on 645 combo. help !

Similar Messages

Maybe you are looking for