Boot problem == pls HELP

I have use the utility disk and format the machintos drive , and use Extended (Journaled , Encrypted) , it ask me for a password (typed the password, confirmed the password - done) , after that i tried to install a fresh copy of Lion (i waited to be downloded from apple.com - done) after that it said that the fresh copy it will be installed and it will reboot by itself -> done ... from here the problem it's starting .... now my macbook air , it dosent start anymore it keep showming me, instaid of the apple sign from the start , a sign like the one from ghost busters (but without the ghost in it ) , i have tried to boot from cd , from usb , nothing dosent seams to be working.
If anyone know a solution to this problem, pls HELP! Thank you in advance...
p.s. before i had 2 hard drives that show up when i press the ALT button (machintos hd and utility drive, or something like that) now.. the only thing that it's showing me is : mac os base system , and if i try to use partition magic or something else, from a usb, it will tell me something about a bootguard , but i don't know how to insert the password.

Glad your issue is fixed. Thanks for the update!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Similar Messages

Urgent: Sessions problem pls help me

Hi all,
Its already late to post this problem.pls help me urgently.
I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
waiting 4 u r reply,

It could be that you have cookies turned off and you're not using URL Rewriting.
In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig

Weird Problem pls help.

Hi guys I have a big problem that I can't figure out. See I have a PT880 Neo and on the mobo box it says it's VIA. But when I go to install the Hyperion 4 in 1 mobo drivers my system crashes. When I boot up I get a Bsod stating my graphics card is in an infinite loop and says the video driver for my card is the problem. Also when I go to install new hardware it doesn't detect it. I checked the bios and pnp is enabled. So I put a new network card in and it will only detect it in the top pci slot so is this some kind of glitch am I downloaded the right drivers? The hyperion 4 in 1's version 455vp1 pls help

I need your full system specs + PSU specs.
Read these guides as well >Moan Guide Power Supply Guide

Import problem,pls help!

Hi,there,
I'm new guy here,I'v got a problem about Import in table mode,I found I can import back all records successfully, but it just appends all records into the orignal table,not overwrite
it,for example, I made a export for a table with 2 records, after then I added some records into that table,
finally I made an import for that table, I found the
total of records is not recovered to 2,but just append
the records from export file,why can't I recover it to 2
record? pls help me,thanks!

All that import does is to run a bunch of SQL statements based on the content of the export file. If you look at the export file in an editor (if its small), or through type (on Windoze) or more on *NIX you will see stuff like:
CREATE TABLE x STORAGE ( ...)
INSERT INTO x col12,col2, ...
VALUES (:b1,:b2, ...
If you give imp the paramter ignore=Y, then the error generated by the CREATE TABLE (table already exists) will be suppressed, but the ata will be inserted. Note that there are no DROP TABLE or TRUNCATE TABLE commands in the export file.
If you want to restore your database to a particular point in time using import, then you will need to manually drop or truncate the tables first. You can generate the required sql from the data dictionary. something like
SET lines 1000 pages 0 feedback off trimspool on;
SPOOL drop.sql;
SELECT 'DROP TABLE '||table_name||';'
FROM user_tables;
SPOOL OFF;
@drop.sqlHTH
John

Upgradation problem pls help

I imported my oracle 8.1.5 database dump in oracle 8.1.7 but when I want to connect to my instance thru a client machine one error message comes as "
problem in connecting to the database, check whether it is started or contact sys admin" whereas the database is in open state.
Then when I connected to sqlplus at the server, it gets connected but some messages also come as below"
ORA-06553: PLS-213: package STANDARD not accessible
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-06553: PLS-213: package STANDARD not accessible
Could anyone pls help..

What is the result of
SQL> show parameter PLSQL_V2_COMPATIBILITY
?

Serious problem. pls help !!!!!!!!!

some "khar, khar sound is coming from below of the keyboard of my hp g6 pavillion 2231 all the time when the lapton is on. what to do. i am fed off of that noise. pls help!!!!!!!!
This question was solved.
View Solution.

Hi
Sorry khar khar ???? Mainly any sounds from under the keyboard would be Fan or HDD either way could mean either the Fan ( if fan ) is struggling to move due to dust build up OR the hard drive is failing ,,, It's difficult to give you a firm answer without more information . Can you tell the difference between the fan noise and a hard drive noise ?? When you start up from cold does the noise start immedietly or is it only heard after say 5-10 minutes ?????? Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Installation problem, pls help

I am trying to install Oracle 10g on SUSE 10.0.0 but when i run the ./runInstaller command, I receive an[b] error of writting to directory /tmp/OraInstall2006-03........, Please ensure this directory is writable and at least 60MB of disk space, i have checked for space using df -h /tmp, there is enough space, i think the problem has got to do with permission because @ the moment it belongs to root user, i don't know what to do, i am a novice to unix and need to install oracle today. Pls help
Usually the standard install of SuSE Linux should set the ownership and access rights to /tmp, if you want to give access to everyone on the system, just use this command (if owner/root access is available):
I have used chmod o+rwx /tmp command and still having the same error. Pls somebody help
chmod o+rwx /tmp

Of course I assume you did correctly follow installation and configuration instructions. Did you read Oracle10g/Linux Errors and Problems from Werner Puschitz ?

Audio+Video Chat works but one small problem.Pls help.

HI..
as i had posted once before in a different query's thread, i have implemented audio and video chat using AVTRansmit2 and avreceive2.
audio and video chat work well.By video chat i mean not only video but VIDEO+AUDIO as well.. just like usual yahoo video chat.
But the problem is like this:-=
I have given an option for user to switch from audio chat to video chat.
now if a user first goes to audio chat and then switched to video chat,
then the problem comes. When he's shifted to video chat i close down previous Audio chat by RTPManager.dispose() , i close the player and everything..
and then i start Video transmit/receive "ALONG WITH" audio transmit/receive..
No this time video starts but audio doesnt work ..
it says"waiting for rtp data to arrive.... "
The problem is that when this new stream of audio data comes, the receiver somehow thinks that its the same old stream since its from same transmitter IP.. and so it tries to UPDATE the previous stream.
It means there is some problem with the close method or RTPManager.dispose() which should have disposed off all the stuff much before the new connection was made.
PLS HELP ASAP>
this is crunch time for my project.

Hi anandreyvk . .
well, i had tried doing removetargets and also, i had disposed RTPManager well. As it turns out the problem was not with any of it but it was the problem of me incorrectly passing RTPManager from AVReceive2 to AVTransmit2.
Actually i am using just one RTPManager.. since i am receiving and transmitting on the same port.
i've solved the problem but i am not sure if this is the right way .. what do you think ??
is creating just one RTPManager {by that,i mean initializing it only once} a good idea ?? Since we are supposed to call both AVTransmit2 and AVReceive2 with the "LOCAL PORT" .. {which in itself is a matter of discussion though! } i and my project mate thought initializing RTPManager only once is a better option .
Whats your take on all of this ?

Help me out to resolve a conditional problem----pls help

Hi Experts ,
I have the requirement in which if the apinumber is greater than or equal to 10 then only the rows should get inserted into the well_header_table from products_mv table.I need to use only merge concept and nothing else.
I am making use of the merge concept here .I am checking for the 10 digit condition during the updation part but same will be inserted into the well header table.This shouldnt happen .Can any one suggest me how can i filter out the insertion part so that it only inserts the rows which has api_number greater than 10 digits.I have marked my 10 digit condition that checks for the update part in bold form.
Pls help me out in resolving this issue .
regards
debashis
[\n]
CREATE or REPLACE PROCEDURE NAG.MERGE AS
BEGIN
merge into NAG.Well_Header_Table
using nag.products_mv
on (SUBSTR(nag.products_mv.API_NUM,0,10) = SUBSTR(NAG.Well_Header_Table.API_NUMBER,0,10) )
WHEN MATCHED THEN UPDATE SET
NAG.Well_Header_Table.WELL_NAME = nags.products_mv.WELL_NAME where nag.products_mv.API_NUM >= 999999999
WHEN NOT MATCHED THEN INSERT (NAG.Well_Header_Table.API_NUMBER,NAG.Well_Header_Table.WELL_NAME,NAG.Well_Header_Table.SECTION,NAG.Well_Header_Table.TOWNSHIP,NAG.Well_Header_Table.RANGE,NAG.Well_Header_Table.WELL_METER_NUMBER,NAG.Well_Header_Table.COUNTY_NAME,NAG.Well_Header_Table.OPERATOR_NAME,NAG.Well_Header_Table.PRODUCTION_FORMATION,NAG.Well_Header_Table.STATE_NAME,NAG.Well_Header_Table.FIELD_NAME,NAG.Well_Header_Table.WELL_FLAC_NUMBER,NAG.Well_Header_Table.WELL_LEASE_FLAC,NAG.Well_Header_Table.WELL_TYPE,NAG.Well_Header_Table.WELLBORE_PROFILE,NAG.Well_Header_Table.STATUS)
values (nag.products_mv.API_NUM,upper(nag.products_mv.WELL_NAME),nag.products_mv.SECTION,nag.products_mv.TOWNSHIP,nag.products_mv.RANGE,nag.products_mv.METER_NUMBER,upper(nag.products_mv.COUNTY_NAME),upper(nag.products_mv.OPERATOR),upper(nag.products_mv.PROD_ZONE),upper(nag.products_mv.STATE_NAME),upper(nag.products_mv.FIELD),nag.products_mv.WELL_FLAC_HZ,nag.products_mv.LEASE_FLAC,upper(nag.products_mv.WELL_TYPE),upper(nag.products_mv.WELLBORE_PROFILE),null);
END;
[n]
regards
Debashis

Try those selects below and look at your on condition
select substr('123456789',1,10) from dual
select 123456789 from dual where 123456789 > 999999999
-- perhaps
on (nag.products_mv.API_NUM = NAG.Well_Header_Table.API_NUMBER and nag.products_mv.API_NUM > 999999999)Regards
Etbin

Im my lap has hard disk problem,how to resolve the problem,pls help me...

Hello,
           I have hp pavilion dv4 lap,in this lap has some hard disk problem,when i am turn on the lap that screen shows this message "The smart hard disk check has detected an imminent failure.To ensure not data loss,please backup the content immediately and run the hard disk test in system diagnostics".
           After that i was diagnostics the system but no changes in the lap,,again again lap shows hard disk error(301).
           Then i am chosen the enter option to start up the lap it take long time for openning the windows,after enter the windows that also shows about the hard disk error in within few minitues,
           What can i do?
           This lap bought at 12-oct-2012 from malasiya,now im in tamil nadu,how to solve the problem please help me.

Hello srhk. Thank you for posting on the HP Forums.
I understand the hard disk is experiencing issues. Error 301 indicates the hard disk possesses a hardware defect. I would contact HP Phone Support for assistance, or purchase an equivalent hard disk.
If you choose to contact HP, their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

SQL server weird connection problem-Pls help

I m using SQL server 2005 express. My default logon mode setting is set to-SQL server authentication and I can logon to using SQL server management studio express always. I enabled TCP/IP from SQL server configuration manager. The sqljdbc.jar (JDBC driver) is set correctly in classpath and 1433 port is allowed in windows firewall. YET, I can�t connect to sql server using the following code-
import java.sql.*; public class testconn { Statement stmt; Connection con = null; String driver = "jdbc:sqlserver://"; String server = "localhost:1433;"; String db = "database=IDLC-Customer;"; String user = "userName=Tanvir;"; String pwd = "password=abcd;"; String connectName = driver + server + db + user + pwd; testconn() { try { Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver"); con= DriverManager.getConnection(connectName); stmt=con.createStatement(); if(!con.isClosed()) System.out.println("Successfully connected to " + "SQL server using TCP/IP..."); } catch(Exception e) { System.err.println("Exception: " + e); } finally { try { if(con != null) con.close(); } catch(SQLException e) {} } } public static void main(String args[]) { testconn tc=new testconn(); } }
My host name is- Tanvir. So, in management studio express the server name is shown- TANVIR\SQLEXPRESS
When I run the code it says-The TCP/IP connection to the host has failed.
Java.net.connectException:Connection Refused: Connect
One more thing, though 1433 port is allowed in windows firewall, I can�t connect to that port using telnet (e.g. telnet <server_host> 1433).I even disabled firewall and tried but in vain. PLEASE help me brother.

masijade. wrote:
Then you, seemingly, have not configured your SQL server properly, or you have not "activated" that configuration.
(don't ask because I don't know how, or even if, you do it that way with SQL Server).
But, not being able to connect with telnet, means that nothing is listening on that port. What does the netstat command tell you?Brother,as u know that sql server use the default port 1433 even if i don't mention it.And I tried disabling my firewall and antivirus but yet I cant connect.I searched the ports using "Advanced port scanner" but the port 1433 is neither in its open ports list nor in closed port list. WHat can I do now.The port 1433 is by default used by sql server.So even if I dont mention it or set it, it should work.Isn't it? I m getting out of my mind, pls help .

Email problems pls help

cut a long story short bought a brand new curve 8900 on ebay i am with t- mobile unlimited internet
but how do i set up hotmail to work on my new phone pls help am new to this phone

you need to call T-Mobile and ask for a BlackBerry Data Plan. Otherwise you can only do phone calls & sms.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Msi nx6800gt agp atrifact problem pls HELP!!!

hello all,
well guys need a help, a real bit starnge problem im facing, i got a MSI NX6800GT 256MB DDR3 AGP graphic card, the system boots up well no issues in the 2d mode but when i ran cod2 i faced kind of shall i say pixel sized squares appearing during gameplay the same was noticed playing f.e.a.r also, i chcked the card with riva tuner it showed the card as a proper 6800gt with 16pipelines etc i dont knw whts the problem i tried the same card in my frnds system also, he is running a gainward 6800gt golden sample we noticed the same kind of square artifacts which run all round the screen sometimes very few but i think as the game goes on its more, the card was run at stock speed of 350/1000 and the temp maintains at 62 degrees...
the system tested on had specs amd 3400+ 754 on a asus k8ne dlx mobo, with 1 gb twinmoss ram, an 500w power supply, the 3dmark2005 scroce is 4736pts, an we noticed these spots even during the benchmark....
the driver version used was 71.77 series then we used the 66 series an even msi's default series or drivers but to no avail pls do guide me on this guys it wud be really really helpful...
regards,
vicky

hey richard,
i tired tht also, infact in the very begening the new forceware drivers were used then we tried the others, actually the artifacts are not like polygons or anthying they are square sized pixels tht appear on the screen, the monitor used was a viewsonic 17'' flat screen and the res was 1024 X 768.
we saw some serious square pixels in bf2, cod2 an even fear! 3dmark05 also displayed the same, do you think its a problem with the card or the cooling, the temp of the card remains between 56-62 deg.
we dont wanna underclock te card as i think it wud void the warranty!

Qosmio X505 - Q870 Freezing Problem PLS HELP !!!

hello everyone
i have toshiba qosmio x505 q870 with nvidia gts 360m. core i7 q720 @1.6
i have this strange problem .. the laptop freezes recently alot that im not being to use it, it happens not in particular situation .. it may happen in any time in anything you are doing. last time happened, i was logging in.
i wish to know whats the problem .. after freezing the only thing that i can do is ahard shut down by keep pressing the power button.
i tried mem test to check the rams .. no errors i have 8gb ram.
i tried scanning the hard disk for bad sectors .. also nth, i have 128 gb ssd
( the laptop came with 500gb hitachi 7200rpm, i added SSD 128gb Kingston later )
and another 500gb seagate 7200 rpm.
i tried replacing rams .. still happening.
i used the laptop without battery only on power still happening.
i used the battery alone also happened.
i changed the windows copy yes it freezed.
some times when it happens i take off the battery and take of the rams and keep pressing the power button to reset the laptop thing about electricity, thats what they told me .
Then it will happen but after awhile. one time i did this thing:
i disassembled the laptop with eveything out and did a cleaning for eveyrhing ( bearing in mind it wasnt full of dust or anything it was clean ) and then reinstalled everything in place.
That was a while ago..
After that it took awhile before rehappening, something about a month . and one time happened during the installtion of windows =S
i tried eveything .. i updated all the drivers, uninstall reinstall, i did a recovery i did eveything with no results no over heating problems
i asked the support center and they didnt figure out whats causing. they did not figure out the problem soo... to show me that they are a good costumer care center they told me that they want to replace :
1. motherboard 280 $
2. graphic card 600 $
3. 2 x 4 gb ram 100 $
4. HDD 70 $
the laptop is out of warranty and im sure i wont do such a thing ..
all of that to be replaced just because they did not figure out.
and im the one whos gonna cry !
im sure that this solution is not the right one.
i tried four different HDD same result and as i mentioned .. one of them was during the installation of windows during the recovery ...
i almost tried eveything i tried to run with one memory module, then the other module, and see if either provides more stability. For clarity, let's call one RAM 1 and the other RAM 2. and i have two slots; call them slot 1 and slot 2. Try RAM 1 in slot 1 with slot 2 empty. If that does not allow the system to work well, try RAM 1 in slot 2 with slot 1 empty. If that does not provide more stability, try RAM 2 in slot 1 with slot 2 empty. If that still is not stable, try RAM 2 in slot 2 with slot 1 empty. still freezing =(
Plus .. i tried 8 different rams modules 1 in 1 , 1 in 2, 2 in 1, 2 in 2 and goes on .. etc .. still freezing .. i tried eveything humanty can do ..
i guess im gonna buy a robot and let him set, think, work, and figure out whats causing ..
after all im guessing its sth about electricity .. i think thats theres atiny black thing in the motherboard causing loose or giving more static or delivering more or less electricity to some parts or anything like this .
who knows ... my humanty after i did all that made think like this .. or lets say its BY LOGIC .. Please Anyone can Help ... !!
anyone can help =( im disperate

A FIX THAT WORKS SO FAR!
I have a x505 - q870 myself and have had problems with freezing for a long time - till a few days ago, it began to freeze at random times even 15 minutes after boot, making the laptop unusable. I use a cooling pad, and that didn't help either. I thought it maybe a corrupt OS, bad memory or a heating problem.
I found this toshiba form post and on advice decided to unseat and reseat the CMOS battery. WARNING: this takes time and patience, you have to disassemble the entire laptop to get to the motherboard. I'll attach an X505 service manual that I found a while ago.
While getting to the CMOS battery, I also discovered that the fans had a carpet layer of dust/lint covering the rear vents (after 2 years heavy travel and use). I cleaned these out (with air), unseated and reseated the battery, and reassembled the laptop. You will have to update system time on first boot. VOILA! I have had the laptop working for two days now, no freezing yet! I am guessing a couple of reasons:
1. Hard resetting the motherboard did something magical - worth a try.
2. Cleaning dirt blocking vents under the motherboard definitely helped heating issues. You may not have this problem. But in any case, do you use a cooling pad?
If you are out of warranty (like me) and have some technical knowledge, I suggest you give this a try. Since I did this I have not had a freeze yet after constant use! This after having repeated freezes every hour of use is definitely an improvement.
Attachments:
x505 manual.pdf ‏6441 KB

Boot problem == pls HELP

Similar Messages

Maybe you are looking for