Boot problems after patching

Solaris X86 release 11/06
Root mirrored with lvm.
smpatch update'ed rebooted.
On reboot I get invalid PBR record error from BIOS.
I boot from cdrom and pressed option 6 (looks like failsafe grub mode) It id's that the only installed os is under md control. So I mount the underling slice and remove system root dev and vfstab md entries.
No when I boot from the cd with option 6 it tells me c1d0s0 is a valid OS to mount on /a - OK.
I now run installgrub (tried -m as well) using the stage1 and stage2 present on the original OS install. Now grub loads on boot. fail safe boot works OK, but full Solaris 10 boot only gets asfar as the kernel copyright before reseting the PC.
I've also run the bootadm update archive -R /a and repeated the installgrub steps from failsafe boot. -- Still the same problem. Kernel copyright is displayed then the PC resets.
HELP what can I do next? I'm new to X86 Solaris so far it seems a real pain compaired to obp based sparc.
Thanks,
Bret

I've now edited the grub menu.lst and added -kd to multiboot kernel entry.
run bootadm update.
Now the machine boots into the kdb but the keyboard is not working - numlock stays on and I'm unable to enter anything to step through the boot process.
I really don't want to have to reinstall and it seems rather pointless reinstalling without understanding how to fix x86 Solaris at this point. When I mount root from failsafe it looks fine. What am I missing?

Similar Messages

Solaris boot problem after Patch cluster install

just wondering if anyone can assist. i have just installed solaris 10 x86 recommended patches on a 16 disks server. where first 2 disks are mirrored called rpool, and remaining 14 disks are raid z called spool. upon installing the patches successfully and rebooting server, i am coming up with the following error:
NOTICE: Can not read the pool label from '/pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@0,0:a /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@1,0:a'
NOTICE: spa_import_rootpool: error 5, Inc. All rights reserved.
Cannot mount root on /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@0,0:a /pci@0,0/pci8086,25f8@4/pci111d,801c@0/pci111d,801c@4/pci108e,286@0/disk@1,0:a fstype zfs
panic[cpu0]/thread=fffffffffbc28820: vfs_mountroot: cannot mount root
fffffffffbc4b190 genunix:vfs_mountroot+323 ()
fffffffffbc4b1d0 genunix:main+a9 ()
fffffffffbc4b1e0 unix:_start+95 ()
skipping system dump - no dump device configured
rebooting...
It looks like the solaris 10 os cannot find zfs filesystem and keeps on rebooting in normal solaris os mode, but when I go to safe mode and type: zfs list, I can see zfs rpool (mirrored) file system and cannot see the zfs spool (raid z) file system, any ideas on how i can fix the boot problem and get zfs spool back in the safest way possible?...

Same problem here with actual recomended patch set.
NOTICE: Can not read the pool label from '/pci@0,0/pci10de,375@f/pci1000,3150@0/sd@0,0:a /pci@0,0/pci10de,375@f/pci1000,3150@0/sd@1,0:a'
NOTICE: spa_import_rootpool: error 5
Cannot mount root on /pci@0,0/pci10de,375@f/pci1000,3150@0/sd@0,0:a /pci@0,0/pci10de,375@f/pci1000,3150@0/sd@1,0:a fstype zfs
panic[cpu0]/thread=fffffffffbc28820: vfs_mountroot: cannot mount root
fffffffffbc4b190 genunix:vfs_mountroot+323 ()
fffffffffbc4b1d0 genunix:main+a9 ()
fffffffffbc4b1e0 unix:_start+95 ()
What the hell happened to the bootsektor or the pool or what ever?

Import/Export problems after patching oracle from 9.2.0.1 to 9.2.0.5

Hi, After I applied the 5 patch to oracle 9201 on Win XP the export utility has started to complain about
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
And after I applied catexp.sql script, it didn't fix the issue with export, the error message has become like this:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Can someone advise, what's wrong with it? With oracle 9.2.0.1 export worked fine, after upgrade to 9.2.0.5 it fails every time it gets to the table data export stage.
Thanks in advise

It seems that you have found an answer in other forum :
Imp/Exp problems after patching oracle to 9205
Nicolas.

Authorization problems after patch 6 upgrade and re-install

Hello everybody.
I had a perfect working Visual Composer installation.
After patching it, I got an 401 message, stating that I do not have authorization to view this page:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Uninstalling and reinstalling didn't bring me much further. It seems to be an Internet Explorer and/or IIS 6.0 related problem.
Of course I followed the very valuable note 804996, but the problem remains...
Can anyone help me out?
Thanx.

Hi all.
I resolved my own problem.
Additional to the permission settings as they are explained in note 804996, you must add the Directory Security - Authentication & Access Control, set to Integrated Windows Authentication.
Otherwise Windows NTFS security will block you.
Gr.,
Marc.

Mac Pro Boot Problems After 10.6.2 Update

After installing the latest version of snow leopard I am now having boot problems on my mac pro.
Symptoms;
-Screen resolution is incorrect at apple splash screen.
-Takes a lot longer than usual to boot.
-Once booted the blue tooth magic mouse isn't imediately reckonised, takes a while to find that.
-Once the mouse is finally reckonised it can move around but can't click on anything or bring up the dock. Tried a wired mouse, had the same problem.
-The keyboard is also not appearing to do anything, none of the shortcuts or quick keys work..
Had exactly the same problem after 3 restarts but on the 4th after leaving it for a good 20-30minutes it setled down and everything was working okay. However this is a recurring problem as I had the same thing yesterday...
I have a my 10.5.8 system backed up on an external so I am running from that at the moment. Don't want to go back to snowy til these problems are solved.
Any help will be greatly appreciated!
Martin

Try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
Let us know.
-mj

Satellite A660 - USB boot problems after BIOS update

Hello,
I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
Regards,
Claudiu.

I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
HOPE someone can help me with this...
John.

How to solve problem After patch 10.2.0.4 applying on owb 10.2.0.1

HI OWB Gurus,
We have recently a patchapplied for oracle 10g .
prev version was oracle 10 g r2 10.2.0.1
new version is 10.2.0.4 ( patchset 4)
After patch applied at database and owb level there are some problem we are facing like
ETL process is very slow , cpu is going to 100% after start any mapping.
and audit browser are not opening.
Can any one help me on this so that we can resolve the problem.
- Umesh

Hi Umesh,
This might help you in diagnosing the client's performance
Accurate optimizer statistics are generally very important. They are gathered automatically at OWB install time and the Design Center -> Tools -> Optimize Repository menu selection is available to refresh them on an as needed basis.
The DBA can always help by pre-expanding tablespaces, making sure multiple tablespaces are available on separate disks or disk arrays so that I/O to indexes, metadata tables, snapshot tables, DB undo and redo logs, etc., can be evenly distributed.
With more complex metadata in this OWB release, you can expect many JDBC round-trips to the DB. Network latency can have a big impact on performance. To see how much time the owbclient uses for JDBC roundtrips to the DB, add the following line to Preference.properties in <owb home>/owb/bin/admin on your client machine:ClientProfile=true
Run OWB, then check ClientProfile.log in the admin directory. Keep in mind that a ping to localhost is probably about 0.025 ms, to another machine in the LAN about 0.25 ms. If the roundtrips are greater than 40 ms, then the issue is likely related network latency.
The two basic workarounds for network latency are:
-Remote control an OWB client machine that is physically close to the server.
-Do design-time work on a local repository, then MDL export the work for import to a central repository.
If the client and server are not on the same (high bandwidth) LAN, then total available bandwidth may become a factor. Same thing if the DB server is heavily loaded with respect to CPU or I/O, or if all your OWB design-time metadata is located on the same tablespace on the same hard drive. Distributing projects across multiple repositories which use their own
tablespaces spread across multiple hard drives would be very desirable.
The object editors are more functional and complex, as such, the required processing power to render them is greater (processor > 2GHz) Also note the OWB client software is mostly single-threaded, so it won't take advantage of multiple processors on one machine.
Long running sessions or large bulk operations (MDL import, validation, generation, deployment over large or multiple modules) can push up against the JVM memory limit. If performance begins to suffer due to memory, either:
a)exit and restart the OWB session;
b) if adequate physical memory exists, increase the -Xmx and -Dlimit values in the owbclient and OMBPlus startup scripts to better accommodate large operations.
ie.
If you have 2 GB or more, backup and edit owb\bin\win32\owbclient.bat file and modify line starting with %JAVAPATH
ie.
%JAVAPATH%\jre\bin\java -Xms128M -Xmx1024M -Dlimit=1024M -XX:MaxPermSize=1024M
This will add more memory to JVM for OWB client. Do the same for owb.cl file
Hope this will add some value.
Best Regards,
Prasad Bolla.

Problem after Patching

Hello ,
I have patch SM system fromSP16 to SP17.
After patching i am not able to see any My customizing worklist project in TC-SPRO
and also i am not able to see system in Maintenance Optimizer Transaction .
Please let me know is anything else to do after patching?
Regards,
Swaroop

Go through these links..
spau
SPDD and SPAU after patch implementation

Problems after patch abap/java sp04 to sp07 and cimmodel/cr data on PI7.1

hello friends,
after patch abap/java stack aan update cim model and cr content 3.00 to 4.xx, i have the following error by url:
http://<hostname:50000>/dir
error:
Internal Error
Internal error; contact your system administrator
Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
i have manually added the parameter in exchangeprofle, but what is the right value? is this the right way?
Thanks,
christoph

Guys,
Any success????
I am working on PI 7.1. I m also facing same issue..... when I tried to upgrade SAP-XICONS and SAP_XIPCK component from SP 4.0 to 7.0.
In my case the SLD, RWB and NWA is working... but I am not able to access
http://pidev:50000/dir/start/index.jsp.
The error says:
Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
deatiled error ************************
Stacktrace
Thrown:
com.sap.aii.ib.core.applcomp.StartupException: Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
     at com.sap.aii.ib.core.applcomp.StartupException.newEntryClassNotFound(StartupException.java:78)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:101)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
     at JEE_jsp_start_index_6931850_1232360340765_1232372432437._jspService(JEE_jsp_start_index_6931850_1232360340765_1232372432437.java:122)
     at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:295)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Initial Startup Exception
Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
Thrown:
com.sap.aii.ib.core.applcomp.StartupException: Internal error: Unable to start component DIRECTORY_SERVER. Specified StartupCodeEntry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
     at com.sap.aii.ib.core.applcomp.StartupException.newEntryClassNotFound(StartupException.java:78)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:101)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
     at com.sap.aii.ibdir.server.cache.monitoring.CacheMonitorServlet.startup(CacheMonitorServlet.java:104)
     at com.sap.aii.ibdir.server.cache.monitoring.CacheMonitorServlet.init(CacheMonitorServlet.java:45)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:97)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:341)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:849)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:219)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Regards,
Siddhesh S.Tawate

T420s Boot problem after BIOS update

I updated T420s from 1.37 to 1.38 while laptop was in the dock, not connected directly to power. Now it starts to boot then goes to a black screen and hangs. If I use f11 to boot from a CD, then it boots normally to Windows 7 Pro and works fine. I also notice the power indicator no longer lights, it only flashes a couple times then stays dark.
I still had 1.36 in my drivers so I tried going back to 1.36 BIOS, hooked to power this time, not dock. That worked and it shows 1.36 version as the BIOS but boot behavior is the same. Any ideas?
Moderator Note; subject edited; system type added

Hi,
Welcome to Lenovo Community Forums!
I'm really sorry to hear that your Lenovo T420s does not boot properly after a BIOS update.
I would suggest you to disable Intel AMT in BIOS and set the security chip, TPM, as active in BIOS and check if the system boot properly.
Occasionally, a system BIOS flash procedure will not execute properly and a system may be hung in a black screen state. If the system not booting properly, it can often be recovered by clearing CMOS.
Remove AC and System battery.
Press and hold the power button several times (3-5 time) for a count of 5 seconds
Reconnect AC and press the power button - if system starts normally, shut down and insert the battery
Remove the CMOS battery, and allow system to set for 30 minutes.
Location of CMOS battery and instructions for removal can be found in the hardware maintenance manual.
Try updating your docking station firmware as well.
Do post back if issue persists after performing the above troubleshooting steps.
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[SOLVED] Boot problems after system upgrade

hi everybody,
first of all i have to say, that the machine where i installed Arch is pretty old (something around 5 years).
I already tried installing Arch two times and every time after i performed a system upgrade, i couldn't boot arch.
Before the upgrade i rebooted several times to ensure that its working with the brand new installation - it worked.
Here i'm the 3rd try. This time i configured packman to ignore the kernel package and voila its working now with kernel 2.6.25.6-1.
So, here is my question: Is there any problem that could appear later on if i never upgrade the kernel?
I'm quite new to linux and really appreciate your support.
Regards
Daniel
Last edited by mrorange (2010-02-25 21:35:32)

Well ... the kernel, like any other piece of program, from time to time has to be patched if they find a bug in it.
Never upgrading means that you do not get the benefit of security and improvements patches.
There is also the issue that some programs, a few, may want to have a certain kernel to run but I think that is less common.
I, for instance, have not upgraded the kernel for a few months now because it screws up my wifi.
If you can live with that then you are OK.
R.

Java desktop problem after patch 118870-01 install

FYI
Java desktop stopped functioning properly after the installation of patch 118870-01, part of the recommended patch cluster.
Symptoms included no longer being able to launch mozilla, and upon reboot, no longer being able to login to java desktop.
patchrm 118870-01 fixed the problem.

Found that patch 119593-01 also appears to be causing the problem, along with patch 118870-01.
Fun :)

Windows 7 boot problems after partitioning Mac Disc

Hi
I got a big Problem. I installed Windows 7 with Bootcamp. I have a 600Gb Mac Partition and a 150Gb Bootcamp Partition.
After Configuring Windows, I switched to the Mac OSX Snow Leopard System. I changed the Main Partition of 600Gb into 3 smaller ones. After this change I can't boot Windows 7 anymore. With the Option Key it doesn't show me the Bootcamp Partition. In the Sys. Preferences under Startup Disk it show me the Windows on Bootcamp Partition, but when I click restart, it shows me only the No System Disk Boot black screen.
I read a bit in the forum, but I haven't found the problem yet.
Thx for your help
NESTi

Your problem is quite clear and simple: you added and changed the parition numbers and table.
You want a linux style with a slice for swap, root, usr and data?
Use Mac's new Recovery - command d on startup.
Enable viewing hidden partitions in Disk Utility.
Use Windows DVD to fix and edit BCD
What you did is not supported. I know XP can't boot unless it is partition #4 or lower.
There is 200MB GPT, 128MB EFI, HFS+ 600GB would have been 3rd but GPT is zero, only now you have three where there was one.
Manage all partitions with Disk Utility in OS X
Check partition table health in Lion's Disk Utility
BCD for Windows 7 and Lion

Problems after patch 120230-08

I have installed that patch and i encountred a lot of problems. I'll start with the most important SSL imap, pop3 doesn't work. After upgrade i noticed that my ssl certification is out of date so i tried to recreate it
/opt/sun/messaging/sbin/certutil -N -d /opt/sun/messaging/config -f /opt/sun/messaging/config/sslpassword.conf
/opt/sun/messaging/sbin/certutil -S -n SampleRootCA -x -t "CTu,CTu,CTu" -s "CN=Sample Root CA, O=Sample.pl" -m 25000 -o /opt/sun/messaging/config/SampleRootCa.crt -d /opt/sun/messaging/config -f /opt/sun/messaging/config/sslpassword.conf -z /etc/passwd
/opt/sun/messaging/sbin/certutil -S -n Server-Cert -c SampleRootCA -t "u,u,u" -s "CN=sun.workgroup.Sample.pl, o=Sample.pl" -m 25001 -o /opt/sun/messaging/config/SampleSSLServer.crt -d /opt/sun/messaging/config -f /opt/sun/messaging/config/sslpassword.conf -z /etc/passwd
/opt/sun/messaging/sbin/certutil -V -u V -n SampleRootCA -d /opt/sun/messaging/config
/opt/sun/messaging/sbin/certutil -V -u V -n Server-Cert -d /opt/sun/messaging/config
/opt/sun/messaging/sbin/certutil -L -d /opt/sun/messaging/config/
/opt/sun/messaging/sbin/certutil -L -n Server-Cert -d /opt/sun/messaging/config/
/opt/sun/messaging/sbin/modutil -list -dbdir /opt/sun/messaging/config/
chown mailsrv:mail /opt/sun/messaging/config/key3.db
chown mailsrv:mail /opt/sun/messaging/config/cert8.db
Did all that steps (where Sample = my company name) and every result from that command was as before. Checked configutil:
service.imap.allowanonymouslogin = no
service.imap.banner = "%h %p service (%P %V)"
service.imap.enable = 1
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
Everything seems fine. I checked my old old configutil entries and turned out almost all 'encryption' entries aren't there. So i added those
encryption.nscertfile = config/cert8.db
encryption.nskeyfile = config/key3.db
encryption.nsssl3 = on
encryption.nsssl3ciphers = "rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha"
encryption.rsa.nssslpersonalityssl = Server-Cert
But everytime i added them i had:
/opt/sun/messaging/lib/configutil -o encryption.nsssl3ciphers -v rsa_rc4_40_md5,rsa_rc2_40_md5,rsa_des_sha,rsa_rc4_128_md5,rsa_3des_sha
OK SET
WARNING: unrecognized option encryption.nsssl3ciphers has been set
So i wonder what's up, what changed between versions. It was supposed to be quick fix but it wasnt :/
My version:
Sun Java(tm) System Messaging Server 6.3-0.08 (built Jun 8 2006)
libimta.so 6.3-0.08 (built 08:28:13, Jun 8 2006)
Linux workgroup.sample.pl 2.6.12-1.1381_FC3smp #1 SMP Fri Oct 21 04:03:26 EDT 2005 i686 i686 i386 GNU/Linux
Any help will be appreciated :/

I've solved the problem myself. Turns out there were few sslpassword files.
sslpassword file had just: mypassword
while
sslpassword.conf had Internal (Software) Token:mypassword
seems the LEGIT one is just plain password in sslpassword file. Then it all works fine. Hopefully this will save some time to some ppl.
Cheers

Windows XP boot problems after latest BDM Installed

Blackberry Desktop Manager 5.0.1
Hi Everyone,
I installed Blackberry Desktop Manager on a Dell Laptop yesterday and after a reboot it took forever to boot into Windows XP SP3 and when it did the machine was completely unresponsive.
I eventually managed to get the Task Manager running and it turns out that the process called System was using 99% CPU constantly.
Safe Mode took 20 minutes to go into Windows and again windows was unresponsive to the point I was unable to open the Control Panel and uninstall BDM.
I tried Last Known Good Configuration to no avail and in the end I reinstalled the System from Scratch.
I couldn't be 100% sure it was the installation of BDM that caused the problem because Windows had installed some updates so I figured a clean install would be a wise move.
I clean installed XP and updated to SP2 and everything was working perfectly again this morning so I tried to install BDM again - same problem!!!
The system is in a state of unresponsiveness again and I am trying desperately to get into Safe Mode to uninstall BDM which will hopefully restore my PC to a working state.
Does anyone have any ideas I can try or has anyone else experienced this?
I am relatively new to the Blackberry world but I am competent with Windows XP and a manner of technical issues but this is something that is really causing me a headache.

I have had the same problem repeatedly since I first got the 'update avilable' message on my Dell xp sp3.
I've found that turning off communication speeds up the computer so that you can go to a restore point or remove the program through the windows add/remove facility. On my machine (Inspiron 6000) it is fn and f2 keys together.
I did NOT have to rebuild my system.
And thank you - I was beginning to think it was me

Boot problems after patching

Similar Messages

Maybe you are looking for