Boot problems with IDE HD and SATA HD on K7N2-Delta L

I'll get right to the point.
I have an PCI SATA Controller Card in my system (using a K7N2 Delta-L motherboard, BIOS v5.7 with an Athlon XP 2800+ and Corsair ValueSelect 512MB DDR400 RAM on a single stick). My system works fine in it's original configuration of drives (CD-RW drive only drive on IDE bus, and SATA drive only hard drive). However, upon installing my IDE hard drive from my old computer, the system will no longer boot right. I am connecting the other IDE HD as Slave on the CD-RW's bus, as I'm reserving the second bus for bigger and better things such as a DVD burner, and speed isn't too important for this hard drive as it's just my MP3/data I don't need in a hurry drive.
In the current configuration, all three drives are detected properly (CD-RW and HD detected on the IDE detection screen, and the SATA drive detected on the SATA card's detection screen). However, after the SATA detection screen, the system just stops. The cursor is still blinking, but nothing comes up.
Both hard drives are Western Digitals (IDE is a ATA100 Western Digital 60GB at 5400 RPM, and the SATA is a Western Digital 36.7GB at 10,000 RPM), and the CD-RW is a HP CD-Writer 9100. I have Windows XP installed on both hard drives (first partition of the IDE, which is divided into two), but considering the system doesn't even attempt to boot I don't think that's an issue. I've gone through and tried enabling and disabling "Boot Other Device", but still no love. My boot order is set to Floppy, CD-ROM, and SCSI, which works fine when the SATA drive is in there.
Any idea what's up? I can provide more information upon request, as I'm sure there's something I forgot to mention that's important.
Thanks.

Take a look at this link, https://forum-en.msi.com/index.php?threadid=71384, I think you both have the same problem. It seems that a sata drive doesn't like having an ide drive in the system that has an active partition.
Do like Wonkanoby suggest, reformat the ide hard drive and make sure that it's not set to be the active partition in the system. Boot with a 98 boot floppy if you have to so you can format the ide drive to fat32, once you can boot up using the sata drive you can use xp disk manager to convert the ide drive to ntfs.

Similar Messages

Connection problems with idea pad and public network

My Lenovo Idea Pad connects fine at home on our ATT internet connectoin, but will not connect to a local public network at a local departent store. Anyone having suggestions email me at xxxxxxxxxxxxxx Thank you!\
Richard
Moderator note; e-mail address removed to stop the spambots getting it

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Problem with KM4AM-L and SATA

Hi all
My new Seagate Barracuda SATA does not get picked up in the BIOS nor in Windows. I have tested the HDD on another PCand it worked, and tried another SATA HDD on my PC with no success. When trying the HDD on another PC with an identical motherboard I got the same problem. The settings on the BIOS seems fine. I get a "The BIOS does not be installed, press g to continue" error. My PATA HDD's work fine. In windows at the device manager, the "VIA SATA RAID Controller" says "This device cannot start. (Code 10)".
A friend suggested a BIOS update but since I have the latest version (v3.5) i doubt that will fix anything.
Can anyone help me?

Quote from: poties on 26-September-06, 02:16:41
Hi all
My new Seagate Barracuda SATA does not get picked up in the BIOS nor in Windows. I have tested the HDD on another PCand it worked, and tried another SATA HDD on my PC with no success. When trying the HDD on another PC with an identical motherboard I got the same problem. The settings on the BIOS seems fine. I get a "The BIOS does not be installed, press g to continue" error. My PATA HDD's work fine. In windows at the device manager, the "VIA SATA RAID Controller" says "This device cannot start. (Code 10)".
A friend suggested a BIOS update but since I have the latest version (v3.5) i doubt that will fix anything.
Can anyone help me?
I am not familiar with this board so this may not be important. You mention the message refering to RAID. Did you set this drive up in the BIOS as RAID? If so, that may be your problem. See if you can go into the BIOS and set it to NOT be RAID. The fact that the POST does not see the drive tells you it is NOT your OS, but is the motherboard. Whether it is a hardware problem or just a BIOS problem is the question now.
The operation of the PATA drives is not important to this issue. The PSU is also not important to this issue. Any messages in Windows are not important at this point because if the POST does not show the drive, Windows can't see it either.

Boot Camp problems with Windows 7, and a new Macbook Pro

When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
1. No sound with my new Windows 7 64 bits.
2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
Please help.

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

Problem with Data Model and Analysis View

I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
        at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
        at java.lang.Throwable.<init>(Throwable.java:196)
        at java.lang.Exception.<init>(Exception.java:41)
        at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
        at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
        at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
        at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
        at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
        at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
        at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
        at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
        at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
Thanks

I follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Photosho cs4 - problem with filter liquify and gallery

Hello averydoby, when i try to open the filters liquify and the gallery filters happens that before you open takes 10 minutes to load and when you open the program takes any action carried out for 2-3 minutes. The problem essentially is that charge too.
I own a compute macbook pro with 512 mb video card and 2 gb of ram, I have also tried to use the filters with images of a few kb but the same thing happens.
Someone knows what could be the problem?
Thanks to all

I asked because I had the same problem with PS CS2 and mac OS 10.2.8 on a 2 x 1Ghz mac.
(adbobe level 3 Support was able to reproduce the error but there was no solution)
I don't have the this Problem neither with PS CS4 nor PS CS2 on a mac pro (early 2008) running mac os 10.5.6 anymore.
I was just curious if I 'd have an idea to solve this problem.

Boot problems - can I "Archive and Install" to back-up and then reformat?

Hi all!
I'm having booting problems with my PowerBook 15".
I've ran the hardware/disk utility tests and everything seems fine. The problem is, I get a blue-screen with the spinning sun-dial or sthing. It keeps spinning and spinning! I tried going into safe-mode, but it doesn't work!
My question is, can I do an "Archive and Install"... load a fresh copy of OS X on my PowerBook so that I can back-up my data? Would this work?
Please help, thanks!

I took the risk and managed to install Tiger over my previous OS successfully! Afterwards, I backed up everything as fast as I could, and then did a Clean Install. Worked like a charm! haha..
However... after doing the Clean Install, I realised that I am UNABLE to install "Windows Media Player for Mac OX X" on to my machine!?!?! I downloaded "WindowsMediaInstaller.bin", and opened it with StuffIt Expander. StuffIt Expander just hung at the "Preparing" mode and says "Preparing..."
Anyone else has/had the same problem? Please help, as a number of online radio sites require Windows Media Player to run, and now I can't access them!! =(

Poll: Do you have cold boot problem with SB X-FI Fatal1t

Hi guys:
I have post a thread regarding the cold boot problem with SB X-FI Fatalty and OCZ GameXStream 600W SLI power supply combination. Apparently, no one has answer to that . In addition, I have recently RMA'd my psu and received a brand-new unit. The same problem still exists. If the problem is really with the power supply, doesn't matter what kind of the setup I have, I should still have the cold-boot problem. However, it doesn't seem like that. Doesn't matter what kind of cards I put on the motherboard, as long as the SB X-FI Fatalty card is there, there is cold boot problem (even with the setup of cpu, mother, ram, and the sound card only, WITHOUT video card and harddri've). And for other different setup without the SB X-FI Fatalty card, there is no cold boot. The cpu and memory are running at stock speed.
My post regarding the cold boot issue:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=79753
There is one user on the forum saying he has the same problem. Therefore, I think it might be the imcompatibility between the X-FI Fatalty and OCZ GameXStream PSU.
I would like to know how many people that has the same problem that I am having. So I can possibly narrow down the problem and contact OCZ tech support or creative tech support with more information. It would also be benefitical to those who have the same problem as I do.
Please post your system setup as well in the thread.
Greatly appreciate your opinions. Message Edited by White_Hair on 2-02-200604:58 AM
Message Edited by White_Hair on 2-02-200603:22 PM

I would venture to say that it isn't your powersupply, but more likely the X-Fi. I had troubles with my system, until I pulled out my X-Fi and replaced it with a non Creative Labs sound card. One of my troubles, which I incorrectly blamed on my powersupply was the ASUS A8R-MVP motherboard I had and the X-Fi XtremeMusic card, was after gaming for 4 hours, was the?sudden reboot of my system. Powersupply before, was an Antec TrueControl 2 550watt PSU. As it stands right now, I no longer have the parts mentioned and have a decent 700watt powersupply in my system, along with an ABIT AT8 32X motherboard. As you have probably seen there are a lot of problems with the X-Fi soundcards, and I in my right mind can't blame the motherboard, powersupply, motherboard chipset, ram, or any other component in ones system, if one is having trouble other than the X-Fi itself. I'll be honest, there is something quite frankly wrong with the X-Fi, and exactly what that is, I'll probably never know like most people.

K8N NEO4 Platinum cold boot problem with 165 opteron?

I have this board and have a cold boot problem with my opteron. Is there anything I can do to fix this? Its starting to get very anooying.
K8N NEO4 Platinum
165 opty dual core
2X1GB Ballistix PC4000
160GB sata2
7800GTX
X-Fi platinum
600 watt seasonic PSU

Well I am running them at the rated speed of 250 and the rated timings of 3-4-4-10 on the rated 2.8 volts. Ballistix have been known to die quickly when you throw to many volts at them for some reason. I dont get the cold boot problem with the OCZ. Once I finally get it to boot with the Ballistix it works just fine but the next morning I play hell to get it to boot again. I dont even get the main screen to let me get into bios. It just stays black. I have done all kinds of stress testing and ran memtest with no problems. I am really at a loss here.

Boot problems with IDE HD and SATA HD on K7N2-Delta L

Similar Messages

Maybe you are looking for