Boot process painfully slow. 2 minutes +

Greetings to all of you out there in BRIGHT SPARK LAND.
My PC is taking about 2 minutes to boot.
MSCONFIG (everything disabled).  Knocks about 15 - 20 seconds.
De-Frag knocks about 5 to 10 seconds.
Checked BIOS and all looks OK.
My laptop takes about 40 seconds maximum.
Friends computers boot quickly.
Once it completes boot, and it does boot (it is just slow), the computer seems to work fine.  Speeds do not appear compremised and all applications appear to run without incident.
Any ideas as to what my problem might be.  BIOS is still at 1.4.  BIOS upgrades thus far have not bothered me.

OnBoard PROMISE controller is disabled.
The SILICON IMAGE PCI only takes about 2 - 3 seconds to find the MAXTOR.
The time seems to be consumed at:
The WELCOME screen, and, on the main display waiting for the ICONS to be propegated with their correct image rather than the basic Windows one that at first appears.  However, I did believe that the NORTONS software and CORE CENTER may have been to blame, but everything is disabled when I used MSCONFIG and it still made very little difference.
I am still most confused.

Similar Messages

  • One secure website loads painfully slow (7 minutes !). Only this site. How can I streamline firefox to load these pages faster?

    one secure website loads painfully slow (7 minutes !). Only this site. How can I streamline firefox to load these pages faster? This started happening only after I switched from McAffee to Norton Security Suite. Other secure sites load just fine.
    == URL of affected sites ==
    http://www.chase.com

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]].

  • CD drive not recognized & Very slow boot process.

    (I posted this in the newbie forum, but got no answer, so I give it another go)
    Hi all,
    After a few years alternating between gentoo and debian, feeling they were ok, but not exactly what I wanted, I found Arch, and now I am happy. It feels just right. I am still very new, but I am already quite sure I'll settle here.
    But happyness and warm feelings asides, I have a 2 problems I'd like to get some help about.
    problem 1: my CD drive is not recognized. my hard drive and its partitions show up correctly, but I don't get a cd drive.
    problem 2: On the boot process, a lot of time (2 minutes or so) is spend scanning the ATA bus. relevant messages are as follow (plus a few lines before and after just to give context)
    Code:
    Freeing unused kernel memory: 256k freed
    Time: acpi_pm clocksource has been installed.
    ACPI: Unable to derive IRQ for device 0000:00:10.0
    ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
    ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2000 irq 14
    ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
    scsi0 : pata_ali
    ata1.00: ATA-5, max UDMA/100, 78140160 sectors: LBA
    ata1.00: ata1: dev 0 multi count 16
    ata1.00: configured for UDMA/100
    scsi1 : pata_ali
    ata2.00: ATAPI, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata2: port is slow to respond, please be patient (Status 0xd0)
    ata2: soft resetting port
    ata2.00: model number mismatch 'QSI CD-RW/DVD-ROM SBW-241' != ''
    ata2.00: disabled
    ata2: soft resetting port
    ata2.00: ATAPI, max UDMA/33
    ata2.00: configured for UDMA/33
    ata2: EH complete
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata2: port is slow to respond, please be patient (Status 0xd0)
    ata2: soft resetting port
    ata2.00: configured for UDMA/33
    ata2: EH complete
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata2: port is slow to respond, please be patient (Status 0xd0)
    ata2: soft resetting port
    ata2.00: configured for UDMA/33
    ata2: EH complete
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata2: port is slow to respond, please be patient (Status 0xd0)
    ata2: soft resetting port
    ata2.00: configured for UDMA/33
    ata2: EH complete
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    problem 2 and 3 are probably related, and linked to the new pata system in the kernel, but I don't really know anything about it, and my understanding of the mkinitcpio is very very limited. here is mine anyway, comments stripped.
    Code:
    MODULES="pata_ali"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect pata usbinput keymap filesystems"
    I had it with
    Code:
    MODULES="pata_ali ata_generic"
    and with scsi in the HOOKS as the result of the install, but the behavior was exactly the same.
    Oh, and the machine I am using is a 4 year old laptop. Nothing in there is scsi or sata.
    I hope anyone can help me with those.
    Thanks

    Hi, I'm a "newbie" too. Coming from Gentoo/Debian. Installed Arch this week and I think it could be just the distro I have been looking for.
    I too had the same problem and think it's related to the pata modules. ¿Did you have to use the legacy-ide option when installing from the CD? I'm using old hardware (4 year old laptop) and had the same symptoms you are describing. I exchanged pata with ide in mkinitcpio.conf. My MODULES and HOOKS looks like this:
    MODULES="ide_disk ata_generic"
    HOOKS="base udev autodetect ide keymap filesystems" (deleted scsi and sata also because I don't think I need them).
    Then run mkinitcpio.
    I also had to change my device names in /etc/fstab from:
    /dev/sda2 / ext3 defaults 0 1
    /dev/sda5 swap swap defaults 0 0
    to:
    /dev/hda2 / ext3 defaults 0 1
    /dev/hda5 swap swap defaults 0 0
    And finally /boot/grub/menu.lst from:
    kernel /boot/vmlinuz26 root=/dev/sda2 ro
    to
    kernel /boot/vmlinuz26 root=/dev/hda2 ro
    ¿Any experienced user can confirm that I'm doing the right thing? I didn't find documentation in the wiki for old systems. Only the mention of an ide-legacy option.
    Hope it helps.
    Last edited by Malakin (2007-04-29 02:29:31)

  • Upgraded from 10.6.8 to Mavericks last week on my MacBook Pro running the 2.4 GHz i5 and it's painfully slow on start-up- I mean, 5 minutes or more, to be fully functional... Is this normal?

    Upgraded from 10.6.8 to Mavericks last week on my MacBook Pro running the 2.4 GHz i5 and it's painfully slow on start-up- I mean, 5 minutes or more, to be fully functional... Is this normal?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Imac is painfully slow. Opening up applications takes 2 to 3 minutes. This occured just after a failed attempt at downloading a TV episode on Itunes.

    I was downloading a TV episode in Itunes when it froze. The download was not completed. I had to use the emergency shut down processes and then restart my Imac. Everything now takes 2 to 3 minutes to open up. I have access to all my applications,as far as I know,  but everything including my internet is painfully slow. Almost like itues is still running in the background or something.

    Go to user>Applications>Utilities>Activity Monitor and check to see what applications are using all your memory.  You can quit the offending app in Activity Monitor - please let us know what happens,

  • Mac mini (late 2012) boot up slow(1 minute plus)

    I notice my mac mini boot up pretty slow, which takes 1 minute and 30 seconds to boot into login screen.
    Does any one face the same issue?

    Mine was the same until I changed out the HD for a faster unit.  The stock drive is 5400 RPM and slow.  However, you should check your startup programs to see what is starting at login.  Go to preferences, users, login items to check.  Remove anything that is not critical to you.  That may help.

  • Macbook pro 2010 boot time slow 1 minute plus using mavericks 4gb

    hi guys,
    my macbook pro boot time is slow. average is around 1 minute 20s. need help.

    hi kappy
    these results were after doing pram reset and disk repair and disk permission repair.
    following are my bootlogs if this can help identify whats making it slow.
    Jul 30 02:15:43 localhost bootlog[0]: BOOT_TIME 1406666743 0
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.appstore" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
      Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.authd" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.bookstore" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.eventmonitor" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.install" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.iokit.power" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.mail" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.MessageTracer" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.performance" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:11 localhost syslogd[22]: Configuration Notice:
      ASL Module "com.apple.securityd" claims selected messages.
      Those messages may not appear in standard system log files or in the ASL database.
    Jul 30 02:16:12 --- last message repeated 6 times ---
    Jul 30 02:16:11 localhost kernel[0]: Longterm timer threshold: 1000 ms
    Jul 30 02:16:11 localhost kernel[0]: PMAP: PCID enabled
    Jul 30 02:16:11 localhost kernel[0]: Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Jul 30 02:16:11 localhost kernel[0]: vm_page_bootstrap: 804579 free pages and 235805 wired pages
    Jul 30 02:16:11 localhost kernel[0]: kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
    Jul 30 02:16:11 localhost kernel[0]: zone leak detection enabled
    Jul 30 02:16:11 localhost kernel[0]: "vm_compressor_mode" is 4
    Jul 30 02:16:11 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jul 30 02:16:11 localhost kernel[0]: standard background quantum is 2500 us
    Jul 30 02:16:11 localhost kernel[0]: mig_table_max_displ = 74
    Jul 30 02:16:11 localhost kernel[0]: TSC Deadline Timer supported and enabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
    Jul 30 02:16:11 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
    Jul 30 02:16:11 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Jul 30 02:16:11 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Jul 30 02:16:11 localhost kernel[0]: calling mpo_policy_init for Sandbox
    Jul 30 02:16:11 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    Jul 30 02:16:11 localhost kernel[0]: calling mpo_policy_init for Quarantine
    Jul 30 02:16:11 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    Jul 30 02:16:11 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jul 30 02:16:11 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jul 30 02:16:11 localhost kernel[0]: MAC Framework successfully initialized
    Jul 30 02:16:11 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    Jul 30 02:16:11 localhost kernel[0]: AppleKeyStore starting (BUILT: Jun  3 2014 21:40:51)
    Jul 30 02:16:11 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Jul 30 02:16:11 localhost kernel[0]: ACPI: sleep states S3 S4 S5
    Jul 30 02:16:11 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
    Jul 30 02:16:11 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 21:36:10 Jun  3 2014) initialization complete
    Jul 30 02:16:11 localhost kernel[0]: pci (build 21:30:51 Jun  3 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    Jul 30 02:16:11 localhost kernel[0]: [ PCI configuration begin ]
    Jul 30 02:16:11 localhost kernel[0]: console relocated to 0xf80000000
    Jul 30 02:16:11 localhost kernel[0]: [ PCI configuration end, bridges 12, devices 16 ]
    Jul 30 02:16:11 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe5c4b24; max speed s800.
    Jul 30 02:16:11 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    Jul 30 02:16:11 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    Jul 30 02:16:11 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    Jul 30 02:16:11 localhost kernel[0]: rooting via boot-uuid from /chosen: 9CCABAAB-0C77-3533-91BD-B9FFBE8D3445
    Jul 30 02:16:11 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jul 30 02:16:11 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    Jul 30 02:16:11 localhost kernel[0]: com.apple.AppleFSCompressionTypeLZVN kmod start
    Jul 30 02:16:11 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    Jul 30 02:16:11 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    Jul 30 02:16:11 localhost kernel[0]: com.apple.AppleFSCompressionTypeLZVN load succeeded
    Jul 30 02:16:11 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    Jul 30 02:16:11 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    Jul 30 02:16:11 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS545032B9A302 Media/IOGUIDPartitionScheme/Customer@2
    Jul 30 02:16:11 localhost kernel[0]: BSD root: disk0s2, major 1, minor 1
    Jul 30 02:16:11 localhost kernel[0]: BTCOEXIST off
    Jul 30 02:16:11 localhost kernel[0]: BRCM tunables:
    Jul 30 02:16:11 localhost kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    Jul 30 02:16:11 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
    Jul 30 02:16:11 localhost kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
    Jul 30 02:16:11 localhost kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    Jul 30 02:16:11 localhost kernel[0]: Waiting for DSMOS...
    Jul 30 02:15:45 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Jul 30 02:15:45 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    Jul 30 02:16:08 localhost hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    Jul 30 02:16:08 localhost hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Jul 30 02:16:08 localhost distnoted[66]: # distnote server daemon  absolute time: 24.899141653   civil time: Wed Jul 30 02:16:07 2014   pid: 66 uid: 0  root: yes
    Jul 30 02:16:08 localhost com.apple.SecurityServer[14]: Session 100000 created
    Jul 30 02:16:11 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    Jul 30 02:16:11 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    Jul 30 02:16:11 localhost kernel[0]: VM Swap Subsystem is ON
    Jul 30 02:16:13 localhost com.apple.usbmuxd[20]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    Jul 30 02:16:13 localhost configd[56]: IPConfiguration: IPv4 ConfigMethod is missing/invalid
    Jul 30 02:16:13 localhost kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    Jul 30 02:16:14 localhost kernel[0]: IOBluetoothUSBDFU::probe
    Jul 30 02:16:14 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
    Jul 30 02:16:14 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x7400 ****
    Jul 30 02:16:14 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x7400 ****
    Jul 30 02:16:14 localhost kernel[0]: init
    Jul 30 02:16:14 localhost kernel[0]: probe
    Jul 30 02:16:14 localhost kernel[0]: Enter com_eltima_async_Navel::init(this=0xffffff803a046700,dict=0xffffff803a144ec0).
    Jul 30 02:16:14 localhost kernel[0]: Leave com_eltima_async_Navel::init(rs=1).
    Jul 30 02:16:14 localhost kernel[0]: start
    Jul 30 02:16:14 localhost kernel[0]: Enter com_eltima_async_Navel::start(this=0xffffff803a046700,provider=0xffffff803794ac 00).
    Jul 30 02:16:14 localhost kernel[0]: Leave com_eltima_async_Navel::start(rs=1)
    Jul 30 02:16:14 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x7400
    Jul 30 02:16:14 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
    Jul 30 02:16:14 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Jul 30 02:16:14 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xacc0 -- 0xa000 -- 0x7400 ****
    Jul 30 02:16:14 localhost kernel[0]: com_protech_nosleepextension: setting state: 0, for mode: 0 (ac-mode)
    Jul 30 02:16:14 localhost kernel[0]: com_protech_nosleepextension: successfully started
    Jul 30 02:16:14 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    Jul 30 02:16:14 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    Jul 30 02:16:14 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    Jul 30 02:16:14 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    Jul 30 02:16:14 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    Jul 30 02:16:14 localhost kernel[0]: Previous Shutdown Cause: 5
    Jul 30 02:16:14 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    Jul 30 02:16:14 localhost kernel[0]: mTail has not been written to hardware: mTail = 0x00000000, hardare tail register = 0x00000040
    Jul 30 02:16:14 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x7400 ****
    Jul 30 02:16:15 localhost com.apple.SecurityServer[14]: Entering service
    Jul 30 02:16:15 localhost kernel[0]: DSMOS has arrived
    Jul 30 02:16:15 localhost UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    Jul 30 02:16:15 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    Jul 30 02:16:15 localhost UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    Jul 30 02:16:15 localhost mDNSResponder[37]: mDNSResponder mDNSResponder-522.92.1 (Jun  3 2014 12:57:56) starting OSXVers 13
    Jul 30 02:16:15 localhost digest-service[67]: label: default
    Jul 30 02:16:15 localhost digest-service[67]: dbname: od:/Local/Default
    Jul 30 02:16:15 localhost digest-service[67]: mkey_file: /var/db/krb5kdc/m-key
    Jul 30 02:16:15 localhost digest-service[67]: acl_file: /var/db/krb5kdc/kadmind.acl
    Jul 30 02:16:15 localhost awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    Jul 30 02:16:15 localhost digest-service[67]: digest-request: uid=0
    Jul 30 02:16:15 localhost loginwindow[40]: Login Window Application Started
    Jul 30 02:16:15 localhost awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
    Jul 30 02:16:15 localhost mds[36]: (Normal) FMW: FMW 0 0
    Jul 30 02:16:15 localhost digest-service[67]: digest-request: netr probe 0
    Jul 30 02:16:15 localhost digest-service[67]: digest-request: init request
    Jul 30 02:16:15 localhost aosnotifyd[62]: aosnotifyd has been launched
    Jul 30 02:16:15 localhost configd[56]: dhcp_arp_router: en1 SSID unavailable
    Jul 30 02:16:15 localhost digest-service[67]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
    Jul 30 02:16:15 localhost configd[56]: network changed.
    Jul 30 02:16:15 localhost airportd[63]: airportdProcessDLILEvent: en1 attached (up)
    Jul 30 02:16:15 localhost kernel[0]: createVirtIf(): ifRole = 1
    Jul 30 02:16:15 localhost kernel[0]: in func createVirtualInterface ifRole = 1
    Jul 30 02:16:15 localhost kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
    Jul 30 02:16:15 localhost kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    Jul 30 02:16:15 localhost kernel[0]: Created virtif 0xffffff803a0bd800 p2p0
    Jul 30 02:16:16 localhost apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    Jul 30 02:16:16 ALBATROSS-229.local configd[56]: setting hostname to "ALBATROSS-229.local"
    Jul 30 02:16:16 ALBATROSS-229.local configd[56]: IPConfiguration: IPv4 ConfigMethod is missing/invalid
    Jul 30 02:16:16 ALBATROSS-229.local WindowServer[85]: Server is starting up
    Jul 30 02:16:16 ALBATROSS-229.local configd[56]: IPConfiguration: IPv4 ConfigMethod is missing/invalid
    Jul 30 02:16:16 --- last message repeated 1 time ---
    Jul 30 02:16:16 ALBATROSS-229.local mDNSResponder[37]: D2D_IPC: Loaded
    Jul 30 02:16:16 ALBATROSS-229.local mDNSResponder[37]: D2DInitialize succeeded
    Jul 30 02:16:16 ALBATROSS-229.local configd[56]: network changed: DNS*
    Jul 30 02:16:16 ALBATROSS-229.local mDNSResponder[37]:   4: Listening for incoming Unix Domain Socket client requests
    Jul 30 02:16:17 ALBATROSS-229.local networkd[105]: networkd.105 built Aug 24 2013 22:08:46
    Jul 30 02:16:17 ALBATROSS-229 UserEventAgent[11]: assertion failed: 13E28: com.apple.telemetry + 17682 [AE0C3032-1747-317E-9871-E26B5B6B0120]: 0xffffffffe0000001
    Jul 30 02:16:17 ALBATROSS-229.local systemkeychain[86]: done file: /var/run/systemkeychaincheck.done
    Jul 30 02:16:17 ALBATROSS-229.local locationd[42]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
    Jul 30 02:16:17 ALBATROSS-229.local locationd[42]: NBB-Could not get UDID for stable refill timing, falling back on random
    Jul 30 02:16:18 ALBATROSS-229.local locationd[42]: Location icon should now be in state 'Inactive'
    Jul 30 02:16:18 ALBATROSS-229 kernel[0]: en1: 802.11d country code set to 'TW'.
    Jul 30 02:16:18 ALBATROSS-229 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    Jul 30 02:16:23 ALBATROSS-229.local stackshot[24]: Timed out waiting for IOKit to finish matching.
    Jul 30 02:16:25 ALBATROSS-229 kernel[0]: hfs: mounted Recovery HD on device disk0s3
    Jul 30 02:16:25 ALBATROSS-229.local mds[36]: (Normal) Volume: volume:0x7f936b00f200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
    Jul 30 02:16:25 ALBATROSS-229.local fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
    Jul 30 02:16:25 ALBATROSS-229 kernel[0]: fGPUIdleIntervalMS = 0
    Jul 30 02:16:25 ALBATROSS-229 kernel[0]: en4: promiscuous mode enable succeeded
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Session 256 retained (2 references)
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Session 256 released (1 references)
    Jul 30 02:16:25 ALBATROSS-229.local configd[56]: IPConfiguration: IPv4 ConfigMethod is missing/invalid
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Session 256 retained (2 references)
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: init_page_flip: page flip mode is on
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Found 13 modes for display 0x00000000 [13, 0]
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
    Jul 30 02:16:25 --- last message repeated 2 times ---
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000001)
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: mux_initialize: Mode is safe
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Found 13 modes for display 0x00000000 [13, 0]
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Found 1 modes for display 0x00000000 [1, 0]
    Jul 30 02:16:25 --- last message repeated 2 times ---
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: WSMachineUsesNewStyleMirroring: false
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 13 modes available
      Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
      UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[4096 x 2160], 2 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: WSSetWindowTransform: Singular matrix
    Jul 30 02:16:25 --- last message repeated 2 times ---
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 13 modes available
      Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
      UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f0040: GL mask 0x10; bounds (2304, 0)[1 x 1], 2 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f003f: GL mask 0x8; bounds (2305, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f003e: GL mask 0x4; bounds (2306, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: Display 0x003f003d: GL mask 0x2; bounds (2307, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: CGXPerformInitialDisplayConfiguration
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]:   Display 0x042731c0: Unit 0; Vendor 0x610 Model 0x9cc7 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]:   Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]:   Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2307,0)[1 x 1], Rotation 0, Resolution 1
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: CGXMuxBoot: Unexpected boot switch return value (0xe00002c7)
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000001f, accelerator 0x00002ec3, unit 0, caps QEX|MIPMAP, vram 451 MB
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: GLCompositor: GL renderer id 0x01024301, GL mask 0x0000001f, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: GLCompositor enabled for tile size [256 x 256]
    Jul 30 02:16:25 ALBATROSS-229.local WindowServer[85]: CGXGLInitMipMap: mip map mode is on
    Jul 30 02:16:25 ALBATROSS-229.local loginwindow[40]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    Jul 30 02:16:27 ALBATROSS-229.local WindowServer[85]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Jul 30 02:16:27 ALBATROSS-229 kernel[0]: MacAuthEvent en1   Auth result for: c0:a0:bb:16:dc:4c  MAC AUTH succeeded
    Jul 30 02:16:27 ALBATROSS-229 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    Jul 30 02:16:27 ALBATROSS-229 kernel[0]: AirPort: Link Up on en1
    Jul 30 02:16:27 ALBATROSS-229 kernel[0]: en1: BSSID changed to c0:a0:bb:16:dc:4c
    Jul 30 02:16:28 ALBATROSS-229 kernel[0]: AirPort: RSN handshake complete on en1
    Jul 30 02:16:28 ALBATROSS-229 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    Jul 30 02:16:28 ALBATROSS-229.local WindowServer[85]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fe13a416390) - enabling OpenGL
    Jul 30 02:16:30 ALBATROSS-229.local awacsd[59]: Exiting
    Jul 30 02:16:30 ALBATROSS-229.local WindowServer[85]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Jul 30 02:16:30 --- last message repeated 1 time ---
    Jul 30 02:16:30 ALBATROSS-229.local launchctl[131]: com.apple.findmymacmessenger: Already loaded
    Jul 30 02:16:30 ALBATROSS-229.local WindowServer[85]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Jul 30 02:16:30 ALBATROSS-229.local com.apple.SecurityServer[14]: Session 100004 created
    Jul 30 02:16:30 ALBATROSS-229.local UserEventAgent[133]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    Jul 30 02:16:30 ALBATROSS-229.local configd[56]: network changed: DNS* Proxy
    Jul 30 02:16:30 ALBATROSS-229.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'vijayvargiyas' making interface primary (protected network)
    Jul 30 02:16:30 ALBATROSS-229.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    Jul 30 02:16:30 ALBATROSS-229.local UserEventAgent[11]: Captive: en1: Probing 'vijayvargiyas'
    Jul 30 02:16:31 ALBATROSS-229.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    Jul 30 02:16:31 ALBATROSS-229.local loginwindow[40]: Setting the initial value of the magsave brightness level 1
    Jul 30 02:16:31 ALBATROSS-229.local loginwindow[40]: Login Window Started Security Agent
    Jul 30 02:16:31 ALBATROSS-229.local configd[56]: network changed: v4(en1!:192.168.0.103) DNS+ Proxy+ SMB
    Jul 30 02:16:31 ALBATROSS-229.local airportd[63]: _doAutoJoin: Already associated to “vijayvargiyas”. Bailing on auto-join.
    Jul 30 02:16:32 ALBATROSS-229.local SecurityAgent[142]: This is the first run
    Jul 30 02:16:32 ALBATROSS-229.local SecurityAgent[142]: MacBuddy was run = 0
    Jul 30 02:16:32 ALBATROSS-229.local SecurityAgent[142]: User info context values set for mrinalvijayvargiya
    Jul 30 02:16:33 ALBATROSS-229.local loginwindow[40]: Login Window - Returned from Security Agent
    Jul 30 02:16:33 ALBATROSS-229.local loginwindow[40]: USER_PROCESS: 40 console
    Jul 30 02:16:33 ALBATROSS-229.local airportd[63]: _doAutoJoin: Already associated to “vijayvargiyas”. Bailing on auto-join.
    Jul 30 02:16:34 ALBATROSS-229.local apsd[61]: Unrecognized leaf certificate
    Jul 30 02:16:36 ALBATROSS-229.local ntpd[111]: proto: precision = 1.000 usec
    Jul 30 02:16:37 ALBATROSS-229 kernel[0]: AppleKeyStore:Sending lock change 0
    Jul 30 02:16:38 ALBATROSS-229 com.apple.launchd.peruser.501[147]: Background: Aqua: Registering new GUI session.
    Jul 30 02:16:38 ALBATROSS-229 com.apple.launchd.peruser.501[147] (com.apple.EscrowSecurityAlert): Unknown key: seatbelt-profiles
    Jul 30 02:16:38 ALBATROSS-229 com.apple.launchd.peruser.501[147] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    Jul 30 02:16:38 ALBATROSS-229.local launchctl[151]: com.apple.pluginkit.pkd: Already loaded
    Jul 30 02:16:38 ALBATROSS-229.local launchctl[151]: com.apple.sbd: Already loaded
    Jul 30 02:16:38 ALBATROSS-229.local distnoted[154]: # distnote server agent  absolute time: 55.108637984   civil time: Wed Jul 30 02:16:38 2014   pid: 154 uid: 501  root: no
    Jul 30 02:16:41 ALBATROSS-229 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
    Jul 30 02:16:41 ALBATROSS-229.local WindowServer[85]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Jul 30 02:16:41 ALBATROSS-229.local sharingd[175]: Starting Up...
    Jul 30 02:16:41 ALBATROSS-229.local UserEventAgent[153]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    Jul 30 02:16:41 ALBATROSS-229.local mds[36]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    Jul 30 02:16:41 ALBATROSS-229.local WindowServer[85]: Display 0x042731c0: Unit 0; ColorProfile { 3, "Color LCD Calibrated"}; TransferTable (256, 12)
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
    Jul 30 02:16:41 ALBATROSS-229 xpcproxy[183]: assertion failed: 13E28: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
    Jul 30 02:16:41 ALBATROSS-229.local com.apple.audio.DriverHelper[173]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    Jul 30 02:16:42 ALBATROSS-229 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=208[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    Jul 30 02:16:42 ALBATROSS-229.local SystemUIServer[163]: Cannot find executable for CFBundle 0x7fe692d34f10 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
    Jul 30 02:16:42 ALBATROSS-229.local SystemUIServer[163]: Cannot find executable for CFBundle 0x7fe692d346b0 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
    Jul 30 02:16:42 ALBATROSS-229.local SystemUIServer[163]: Cannot find executable for CFBundle 0x7fe692d3ba00 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
    Jul 30 02:16:42 ALBATROSS-229.local com.apple.SecurityServer[14]: Session 100005 created
    Jul 30 02:16:42 ALBATROSS-229.local WiFiKeychainProxy[188]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
    Jul 30 02:16:42 ALBATROSS-229.local WiFiKeychainProxy[188]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    Jul 30 02:16:42 ALBATROSS-229 xpcproxy[222]: assertion failed: 13E28: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    Jul 30 02:16:43 ALBATROSS-229 accountsd[217]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
    Jul 30 02:16:43 ALBATROSS-229.local com.apple.IconServicesAgent[218]: IconServicesAgent launched.
    Jul 30 02:16:43 ALBATROSS-229.local com.apple.SecurityServer[14]: Session 100008 created
    Jul 30 02:16:45 ALBATROSS-229.local SocialPushAgent[190]: ApplePushService: APSConnection being used without a delegate queue
    Jul 30 02:16:45 ALBATROSS-229 com.apple.launchd.peruser.501[147] (com.apple.mrt.uiagent[195]): Exited with code: 255
    Jul 30 02:16:45 ALBATROSS-229.local accountsd[217]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "[email protected]" (EDC70E8C-77B7-4A27-A8E0-918A8EEF6697) could not be found!
    Jul 30 02:16:45 ALBATROSS-229.local accountsd[217]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account [email protected]. Falling back to legacy behavior.
    Jul 30 02:16:45 ALBATROSS-229.local parentalcontrolsd[229]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    Jul 30 02:16:46 ALBATROSS-229.local SystemUIServer[163]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Jul 30 02:16:46 ALBATROSS-229.local SystemUIServer[163]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Jul 30 02:16:56 ALBATROSS-229.local com.apple.time[153]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    Jul 30 02:16:59 ALBATROSS-229.local com.apple.SecurityServer[14]: Session 100011 created
    Jul 30 02:17:01 ALBATROSS-229.local parentalcontrolsd[238]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    Jul 30 02:17:02 ALBATROSS-229.local syncdefaultsd[211]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
    Jul 30 02:17:02 ALBATROSS-229.local Google Drive[215]: PyObjCPointer created: at 0xa186a438 of type {__CFBoolean=}
    Jul 30 02:17:02 ALBATROSS-229.local Google Drive[215]: PyObjCPointer created: at 0xa186a430 of type {__CFBoolean=}
    Jul 30 02:17:02 ALBATROSS-229.local Google Drive[215]: PyObjCPointer created: at 0xa186a440 of type {__CFNumber=}
    Jul 30 02:17:02 ALBATROSS-229.local Google Drive[215]: PyObjCPointer created: at 0xa186a450 of type {__CFNumber=}
    Jul 30 02:17:02 ALBATROSS-229.local Google Drive[215]: PyObjCPointer created: at 0xa186a460 of type {__CFNumber=}
    Jul 30 02:17:02 ALBATROSS-229.local mds[36]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    Jul 30 02:17:03 ALBATROSS-229 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=240[ksadmin] final status 0x0, allowing (remove VALID) page
    Jul 30 02:17:10 ALBATROSS-229.local mds[36]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    Jul 30 02:17:11 --- last message repeated 2 times ---
    Jul 30 02:17:11 ALBATROSS-229.local WindowServer[85]: disable_update_timeout: UI updates were forcibly disabled by application "Canon IJ Network Scanner Select" for over 1.00 seconds. Server has re-enabled them.
    Jul 30 02:17:13 ALBATROSS-229 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
    Jul 30 02:17:13 ALBATROSS-229 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
    Jul 30 02:17:18 ALBATROSS-229.local gamed[221]: CKSoftwareMap: Registering with Daemon
    Jul 30 02:17:18 ALBATROSS-229.local com.apple.internetaccounts[222]: [Warning] ************* com.apple.internetaccounts timed out connecting to imagent, please file a radar, and attach the stackshots generated ***********************
    Jul 30 02:17:19 --- last message repeated 1 time ---
    Jul 30 02:17:19 ALBATROSS-229.local com.apple.internetaccounts[222]: -[IAAccount initWithProviderType:loginName:] [358] -- *** Missing parameter. provider = com.apple.account.addressbook; loginName = (null)
    Jul 30 02:17:19 ALBATROSS-229.local com.apple.internetaccounts[222]: *** Couldn't create account from account settings: {
         IAAccountTypeKey = kIAServiceCardDAV;
         accountDescription = "untitled source";
         inactive = 1;
    Jul 30 02:17:19 ALBATROSS-229.local com.apple.internetaccounts[222]: -[AccountCollection _collectAccountsFromAppsFromPluginID:] [471] -- *** account was nil (com.apple.contacts.iaplugin)
    Jul 30 02:17:19 ALBATROSS-229.local parentalcontrolsd[249]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    Jul 30 02:17:19 ALBATROSS-229.local com.apple.NotesMigratorService[248]: Joined Aqua audit session

  • Equium M40X - Boot Post Process is slow

    Is there anyway I could turn off the POST. The computer takes at least 5minutes booting up and when the Desktop appears applications cannot be used for another 7 minutes until the boot process has completed. The hard drive is half full, I have de-fragmented the files, done the drive clean, but the problem remains.
    Every day the laptop crashes, often receives updates and so much time is wasted. I have tried to find an option in the BIOS to turn off the post for the software I've installed but could not find one.
    I would appreciate any advise on this.
    Je

    Hi Gemma
    I agree with TOM. Is there any strange sound when HDD is active? I recommend you to check sectors on the HDD. For that you can use tool called HDD Regenerator.

  • I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

    I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

    Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot.  After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

  • Good Spec Mac Mini got painfully slow

    Hi All
    Following reading posts on this forum, I have upgraded my 2011 Mac Mini from 4gb to 8gb Memory, but it is still painfully slow, with the spinning beach ball always in play.
    I now have a Core i7, 2.7ghz Mac Mini, with 8GB DDR3 memory, 500 mb disc (with 300gb free), running OSX 10.9.1.  I run Microsoft office and Iphoto and thats pretty much it, but even using Iphoto can take seconds for ecah photo to move, and typing emails often means waiting for the text to catch up with my typing.
    In my frustration I copied everything off, re formatted the hard disc, and re installed everything, but its still the same speed.  The Activity monitor shows very little CPU activity, although the memory shows as 7.87GB used out of 8GB, not sure if that is normal.
    Any ideas would be really welcome, as its getting very frustrating to use, when I first purchased the MAC mini it was blindingly fast on everything.
    Thanks
    Martyn

    If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic  test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
    Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
    Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
    The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
    If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/   /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0));  PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
    Step 2 
    Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
    PR () { [[ "$o" ]] && o=$(sed 's/^/   /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    You can then quit Terminal. Please note:
    ☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
    ☞ When you type your password, you won't see what you're typing.
    ☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
    ☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
    ☞ The commands don't change anything, and merely running them will do neither good nor harm.
    ☞ Remember to post the output of both steps (unless you had to skip Step 2.) It's already in the Clipboard after you complete each step. You don't have to copy it. Just paste into a reply    
    ☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
    ☞ Don't post what you see in the Terminal window. The output is copied automatically to the Clipboard.
    ☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply.

  • My MacBook Pro is running painfully slow all of a sudden. I am trying to clean up my iPhoto library and it's all of a sudden running really slow. I've uninstalled and disabled as many unnecessary apps as possible as far as I can tell.

    Here is the etrecheck info. Please advise... thank you!
    Problem description:
    iPhoto is running painfully slow. My library is on an external hard drive. It was runing just fine yesterday. i disabled Dropbox and a few other applications, to no avail.
    EtreCheck version: 2.1.5 (108)
    Report generated January 7, 2015 at 12:40:17 PM EST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro6,2
      1 2.4 GHz Intel Core i5 CPU: 2-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics - VRAM: 288 MB
      NVIDIA GeForce GT 330M - VRAM: 256 MB
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:55:4
    Disk Information: ℹ️
      Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 318.84 GB (54.79 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Seagate Backup+ Desk 4 TB
      disk2s1 (disk2s1) <not mounted> : 262 KB
      Seagate Backup Plus Drive (disk2s3) /Volumes/Seagate Backup Plus Drive : 4.00 TB (2.73 TB free)
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Apple Inc. Built-in iSight
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) [Support]
    Startup Items: ℹ️
      ProTec6b: Path: /Library/StartupItems/ProTec6b
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [loaded] com.citrix.AuthManager_Mac.plist [Support]
      [running] com.citrix.ReceiverHelper.plist [Support]
      [running] com.citrix.ServiceRecords.plist [Support]
      [invalid?] com.logmein.LMILaunchAgentFixer.plist [Support]
      [not loaded] com.logmein.logmeingui.plist [Support]
      [not loaded] com.logmein.logmeinguiagent.plist [Support]
      [not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
      [invalid?] com.oracle.java.Java-Updater.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [not loaded] com.gopro.stereomodestatus.plist [Support]
      [not loaded] com.logmein.logmeinserver.plist [Support]
      [invalid?] com.logmein.raupdate.plist [Support]
      [loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
      [invalid?] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.sharpcast.xfsmond.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      Dropbox Application (/Applications/Dropbox.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      ThisLife Uploader ApplicationHidden (/Applications/ThisLife Uploader.app)
      WDQuickView Application (/Library/Application Support/WDSmartWare/WDQuickView.app)
    Internet Plug-ins: ℹ️
      LogMeInSafari64: Version: 1.0.586 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      LogMeIn: Version: 1.0.586 [Support]
      Silverlight: Version: 4.0.60831.0 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      LogMeInSafari32: Version: 1.0.586 [Support]
      CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
      Picasa: Version: 1.0 [Support]
    Safari Extensions: ℹ️
      Evernote Web Clipper [Installed]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      GoPro  [Support]
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 318.84 GB Disk used: 264.06 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 264.06 GB X 3)
    Top Processes by CPU: ℹ️
          8% WindowServer
          2% Safari
          1% mds
          1% loginwindow
          0% AppleSpell
    Top Processes by Memory: ℹ️
      2.13 GB iPhoto
      610 MB Image Capture Extension
      155 MB mds_stores
      129 MB Safari
      129 MB Finder
    Virtual Memory Information: ℹ️
      48 MB Free RAM
      3.71 GB Active RAM
      3.68 GB Inactive RAM
      1.04 GB Wired RAM
      6.89 GB Page-ins
      293 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 7, 2015, 12:28:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-122848_[redacted].cpu_resourc e.diag [Details]
      Jan 7, 2015, 12:13:08 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-121308_[redacted].hang
      Jan 7, 2015, 12:07:39 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120739_[redacted].cpu_resourc e.diag [Details]
      Jan 7, 2015, 12:02:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120248_[redacted].hang
      Jan 7, 2015, 11:51:45 AM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-115145_[redacted].cpu_resourc e.diag [Details]
      Jan 7, 2015, 11:45:54 AM Self test - passed
      Jan 6, 2015, 05:01:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-06-170158_[reda cted].crash
      Jan 5, 2015, 02:12:40 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-05-141240_[redacted].cpu_resourc e.diag [Details]
      Jan 5, 2015, 10:04:15 AM /Library/Logs/DiagnosticReports/com.apple.MediaLibraryService_2015-01-05-100415 _[redacted].cpu_resource.diag [Details]
      Jan 4, 2015, 05:28:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/HandBrake_2015-01-04-172820_[r edacted].crash
      Jan 4, 2015, 05:28:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-172804_[reda cted].crash
      Jan 4, 2015, 03:09:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-01-04-150950_[reda cted].crash
      Jan 4, 2015, 03:09:15 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-150915_[reda cted].crash

    Start time: 15:08:00 01/08/15
    Model Identifier: MacBookPro6,2
    System Version: OS X 10.10 (14A389)
    Kernel Version: Darwin 14.0.0
    Time since boot: 1 day3:22
    Memory
        BANK 0/DIMM0:
          Size: 4 GB
          Speed: 1067 MHz
          Status: OK
          Manufacturer: 0x859B
        BANK 1/DIMM0:
          Size: 4 GB
          Speed: 1067 MHz
          Status: OK
          Manufacturer: 0x859B
    SerialATA
       Hitachi HTS545032B9SA02                
    USB
       Backup+ Desk (Seagate LLC)
       USB Receiver (Logitech Inc.)
    FileVault: On
    Diagnostic reports
       2014-12-17 Safari crash
       2014-12-17 com.apple.appkit.xpc.openAndSavePanelService crash
       2014-12-17 garcon crash x4
       2014-12-27 Finder crash
       2014-12-27 ThisLife Uploader crash
       2014-12-27 garcon crash x2
       2014-12-28 Finder crash
       2014-12-28 garcon crash x3
       2014-12-31 com.apple.appkit.xpc.openAndSavePanelService crash
       2014-12-31 garcon crash
       2015-01-02 Finder crash
       2015-01-02 garcon crash
       2015-01-05 Finder crash
       2015-01-05 HandBrake crash
       2015-01-05 garcon crash x2
       2015-01-07 garcon crash
       2015-01-08 iPhoto hang x2
    Log
       Jan  7 11:47:39 com.apple.xpc.launchd.domain.user.55: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 11:47:43 com.apple.xpc.launchd.domain.user.202: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 11:47:43 com.apple.xpc.launchd.domain.user.202: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 11:47:58 com.apple.xpc.launchd.domain.user.89: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 11:47:58 com.apple.xpc.launchd.domain.user.89: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 11:48:38 jnl: disk2s3: replay_journal: from: 50180096 to: 50778112 (joffset 0x3a3c000)
       Jan  7 11:48:39 jnl: disk2s3: journal replay done.
       Jan  7 11:49:37 com.logmein.LMILaunchAgentFixer: Service setup event to handle failure and will not launch until it fires.
       Jan  7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
       Jan  7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
       Jan  7 11:49:39 com.citrix.ServiceRecords: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.citrix.Beacons
       Jan  7 11:51:29 process iPhoto[248] thread 2450 caught burning CPU! It used more than 50% CPU (Actual recent usage: 52%) over 180 seconds. thread lifetime cpu usage 90.109268 seconds, (87.476202 user, 2.633066 system) ledger info: balance: 90008641218 credit: 90014455352 debit: 5814134 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 172082865204
       Jan  7 11:52:49 com.apple.xpc.launchd.domain.user.99: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 11:52:49 com.apple.xpc.launchd.domain.user.99: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
       Jan  7 12:07:36 process iPhoto[490] thread 12067 caught burning CPU! It used more than 50% CPU (Actual recent usage: 93%) over 180 seconds. thread lifetime cpu usage 90.200179 seconds, (88.682346 user, 1.517833 system) ledger info: balance: 90012025000 credit: 90016246356 debit: 4221356 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 96436947650
       Jan  7 12:19:32 com.apple.xpc.launchd.domain.pid.quicklookd.536: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
       Jan  7 12:21:38 process WindowServer[134] caught causing excessive wakeups. Observed wakeups rate (per sec): 174; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 130324
       Jan  7 12:24:23 process Image Capture Ex[494] caught causing excessive wakeups. Observed wakeups rate (per sec): 1570; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45166
       Jan  7 12:28:45 process iPhoto[643] thread 21591 caught burning CPU! It used more than 50% CPU (Actual recent usage: 90%) over 180 seconds. thread lifetime cpu usage 90.114637 seconds, (88.373536 user, 1.741101 system) ledger info: balance: 90002127665 credit: 90005648813 debit: 3521148 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 99086317519
       Jan  7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
       Jan  7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
       Jan  7 13:13:15 process com.apple.WebKit[827] caught causing excessive wakeups. Observed wakeups rate (per sec): 560; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 55866
       Jan  7 20:09:33 process iPhoto[643] caught causing excessive wakeups. Observed wakeups rate (per sec): 198; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 269536
       Jan  8 01:12:04 AppleUSBMultitouchDriver::validateChecksum - 512-byte packet checksum is incorrect (expected 0xf60c, checksum bytes were 0xdead)
       Jan  8 15:06:18 com.apple.xpc.launchd.domain.pid.quicklookd.1302: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
    Memory: iPhoto (UID 501) is using 2093 MB
    kexts
       com.logmein.driver.LogMeInSoundDriver (4.1.46f67)
    Daemons
       com.adobe.fpsaud
       com.apple.installer.osmessagetracing
       com.logmein.raupdate
       com.macpaw.CleanMyMac2.Agent
       com.sharpcast.xfsmond
    Agents
       com.adobe.ARM.UUID
       com.apple.AirPortBaseStationAgent
       com.apple.photostream-agent
       com.citrix.AuthManager_Mac
       com.citrix.ReceiverHelper
       com.citrix.ServiceRecords
       com.google.keystone.user.agent
       com.logmein.LMILaunchAgentFixer
    Startup items
       /Library/StartupItems/ProTec6b/DemoOver
       /Library/StartupItems/ProTec6b/Nalpeirond6b
       /Library/StartupItems/ProTec6b/ProTec6b
       /Library/StartupItems/ProTec6b/StartupParameters.plist
    dylibs
       /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
       /Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.6.703/_platform_specific/mac_x64/libwidev inecdm.dylib
       /usr/lib/HDREfexProFC.dylib
    App extensions
       com.getdropbox.dropbox.garcon
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist
       - mod date: Jun  7 11:58:25 2013
       - checksum: 1591517921
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist
       - mod date: Jun  7 11:58:25 2013
       - checksum: 676087606
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.citrix.ReceiverHelper</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist
       - mod date: Jun  7 11:58:25 2013
       - checksum: 1445213025
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.Beacons</key>
        <true/>
        <key>com.citrix.ServiceRecords</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.ServiceRecords</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
        </array>
       ...and 8 more line(s)
    Contents of /Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist
       - mod date: Nov 10 20:47:41 2014
       - checksum: 94065829
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Label</key>
        <string>com.logmein.LMILaunchAgentFixer</string>
        <key>OnDemand</key>
        <true/>
        <key>ThrottleInterval</key>
        <integer>1</integer>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/LogMeIn/bin/LMILaunchAgentFixer.app/Contents/MacOS/LMILaunchAgentFixer< /string>
        <string>fromlaunchagent</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.logmein.logmeingui.plist
       - mod date: Jan  7 12:05:30 2015
       - checksum: 849719711
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.logmein.logmeingui</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>Aqua</string>
        </array>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/LogMeIn/bin/LogMeInGUI.app/Contents/MacOS/LogMeInGUI</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.logmein.logmeinguiagent.plist
       - mod date: Jan  7 12:05:30 2015
       - checksum: 1227007658
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.logmein.logmeinguiagent</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>Aqua</string>
        </array>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>Sockets</key>
        <dict>
        <key>Listeners</key>
       ...and 19 more line(s)
    Contents of /Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist
       - mod date: Jan  7 12:05:30 2015
       - checksum: 3390435066
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.logmein.logmeinguiagentatlogin</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>LoginWindow</string>
        </array>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>Sockets</key>
        <dict>
        <key>Listeners</key>
       ...and 19 more line(s)
    Contents of /Library/LaunchDaemons/com.gopro.stereomodestatus.plist
       - mod date: Jan 29 17:22:17 2014
       - checksum: 2319101607
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.gopro.stereomodestatus</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>RunAtLoad</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/GoPro/Tools/StereoModeStatus.app/Contents/MacOS/StereoMod eStatus</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.logmein.logmeinserver.plist
       - mod date: Jan  7 12:05:30 2015
       - checksum: 1427099528
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.logmein.logmeinserver</string>
        <key>LegacyTimers</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>ProcessType</key>
        <string>Interactive</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/MacOS/LogMeIn</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/LogMeIn/stderr.log</string>
        <key>StandardOutPath</key>
       ...and 7 more line(s)
    Contents of /Library/LaunchDaemons/com.logmein.raupdate.plist
       - mod date: Nov 10 20:46:56 2014
       - checksum: 3493110929
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.logmein.raupdate</string>
        <key>OnDemand</key>
        <true/>
        <key>RunAtLoad</key>
        <false/>
        <key>KeepAlive</key>
        <false/>
        <key>LaunchOnlyOnce</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/LogMeIn/update/raupdate</string>
        <string>/s</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/LogMeIn/stderr.log</string>
        <key>StandardOutPath</key>
        <string>/Library/Logs/LogMeIn/stdout.log</string>
        <key>WorkingDirectory</key>
        <string>/Library/Application Support/LogMeIn/bin/</string>
       ...and 2 more line(s)
    Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
       - mod date: Sep  1 15:15:35 2014
       - checksum: 2214847194
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2.Agent</string>
        <key>MachServices</key>
        <dict>
        <key>com.macpaw.CleanMyMac2.Agent</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
       ...and 8 more line(s)
    Contents of /Library/LaunchDaemons/com.sharpcast.xfsmond.plist
       - mod date: May  4 20:28:27 2013
       - checksum: 3377386094
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//ENhttp://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <!-- SugarSync version 1.9.96.111090.20130403 -->
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.sharpcast.xfsmond</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/SugarSync/scxfsmond</string>
        <string>-log</string>
        <string>error</string>
        <string>-launchd</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>Listeners</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
       ...and 14 more line(s)
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
       - mod date: Jul 24 11:11:09 2013
       - checksum: 394026997
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
        <string>semi-auto</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist
       - mod date: Nov 30 14:26:35 2014
       - checksum: 4084537214
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Listeners
       cupsd: ipp
    User login items
       Garmin Express Service
       - /Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app
       Dropbox
       - /Applications/Dropbox.app
       Google Chrome
       - /Applications/Google Chrome.app
       ThisLife Uploader
       - /Applications/ThisLife Uploader.app
       WDQuickView
       - /Library/Application Support/WDSmartWare/WDQuickView.app
    Safari extensions
       Evernote Web Clipper
       - com.evernote.safari.clipper
    Widgets
       iCal
       Earth
    Restricted files: 339
    Lockfiles: 101
    Elapsed time (s): 844
    Wow, that's a lot of data for you to sift through, but I suppose you know what you are looking to find. I bet you earned every one of those points. Thanks, Linc. All the folks in the world waiting for me to share their photos with them thank you as well : )  Cathleen

  • Painfully slow access to admin console (how can I fix it?)

    Hi,
    I'm using using Sun Java System Web Server Version 7.0U4 B12/02/2008 02:17 running on CentOS (Redhat EL) release 4.4.
    The problem is that using the Admin Console (on port 8989) is painfully slow. It takes minutes for each page to load, but they do usually load.
    Any ideas on how to fix that?
    There are some other things going on that might be related and helpful to know:
    I get certificate errors when I access the Admin Console (e..g, IE complains about a mismatched address). I've tried following the directions to install the certificate in IE7 and FF3, but neither has stopped bothering me about the certificate error.
    I have the server behind a firewall which allows all outgoing traffic and select incoming ports to the server. The firewall also maps a public IP address to the server's local IP address (e..g, 10.10.10.8).
    If I access the Admin Console locally via the LAN address (https://10.10.10.8:8989) it is no longer slow, but I get booted back to the login screen very frequently (e.g, every minute or two of casual browsing through the console), and I still get the certificate error
    We haven't given the server a name, but access it by IP address, and the virtual server configuration in the Admin Console is name "localhost.localdomain"
    Any help and suggestions would be greatly appreciated!! I've tried searching for solutions several times, but haven't succeeded.
    Thanks,
    Tim

    Thanks for the thoughts
    sriram.natarajan wrote:
    The problem is that using the Admin Console (on port 8989) is painfully slow. It takes minutes for each page to load, but they do usually load.
    Any ideas on how to fix that?
    sounds more like some network issues. are you running your browser on your centos 4.4 as well ? also, did you try to connect using your IP - some thing like https://<ip>:8989 ?
    No, we're not running the browser on centos 4.4. We're runing browsers on laptops, connecting both offsite via public IP address and in the office via both the public IP address and the LAN ip address.
    Yes, we're using the ip address as you demonstrated. This machine does not have a domain name attached, so we only connect via ip addresses (mapped public or LAN)
    >>
    I get certificate errors when I access the Admin Console (e..g, IE complains about a mismatched address). I've tried following the directions to install the certificate in IE7 and FF3, but neither has stopped bothering me about the certificate error.it is not a certificate error. web server 7 admin server uses a self signed certificate . this is necessary step. however, IE reports a warning when it sees a self signed certificate. it wants you to know that it does not understand who sent this certificate. you need to create an exception - saying that you know what you are doing then there won't be any certificate error ..Okay, I'll look for how to do that, but so far I've only found instructions for how to install the certificate in the browsers, and unfortunately, that hasn't made a difference.
    >>
    I have the server behind a firewall which allows all outgoing traffic and select incoming ports to the server. The firewall also maps a public IP address to the server's local IP address (e..g, 10.10.10.8).
    sounds like some network misconfiguration - outside the scope of this forum.I cannot rule that out, but other servers/websites seem to work fine with this same setup. Although, only this server is using https
    >
    If I access the Admin Console locally via the LAN address (https://10.10.10.8:8989) it is no longer slow, but I get booted back to the login screen very frequently (e.g, every minute or two of casual browsing through the console), and I still get the certificate error
    if you want to increase this time out, you could do so by manually editing <install-root>/lib/webapps/admingui/WEB-INF/web.xml and change the value for session-timeout to say 600 (for 10 minutes).. . pl . note that this is not a supported way and you could potentially leave others to use your session if you are careless. but, if you know what you are doing .Thanks I did that. It surprises me that the default timeout appears to be 1 minute.

  • Photoshop CS5.5 extended and XP sp3 PAINFULLY SLOW

    I've reinstalled Photoshop to clear up the errors.
    Windows XP is fully updated.
    Disk is regularly cleaned and defragged
    But working in Photoshop is PAINFULLY slow with lots of processes just hanging for several minutes.  Mini-bridge will sometimes completely fail.
    Running on a 1.73 GHz Intel Pentium(r) processor with 2.00 gb RAM and 40g free working space.
    is this box just too old and powerless for PS to function well on it?
    thanks for any suggestions.
    e

    As Noel mentions, the 2GB RAM is not going to be able to handle all that much, and with only 40GB of HDD space left, you have a bottleneck there too. First, PS's Scratch Disks will be limited, and also your Windows Virtual Memory (Page File) will need free, defragmented space to take up the slack, from the lack of RAM. My guess would be that you left the Page File on the default, and that it is being dynamically managed, so it grows and shrinks, as is needed.
    When a HDD gets neare 70% capacity, it begins to slow down. The closer to capacity it gets, the slower it gets, and the closer to a failure it gets.
    From a BftB (Bang for the Buck) standpoint, more RAM would be a good first step, and an additional HDD would be the next. Both RAM and HDD's are quite cheap nowadays, and in cases like this, their impact can be great. For the HDD, you would probably want to clean up C:\, storing some "stuff" onto your new D:\ (or whichever drive letter is assigned), and then locate your PS Scratch Disks there too.
    Good luck,
    Hunt

  • PAINFULLY slow- can take 4 min to infinity to change tabs!

    I have a late 2008 MacBook Pro (original unibody MBP) that's running PAINFULLY slow! I used to be able to run 2 browsers with 15 tabs each, Photoshop, and word all at once. Over the last couple months, I can have as little as a browser with a few tabs and it grinds to a halt. I can simply click on a tab, or on a drop down menu, and I'll get the spinning beach ball for 4 or 5 minutes. Even cmd-opt-esc is unresponsive. Then, minutes later, it'll instantly execute anything I commanded over the last several minutes.  Firefox seems to be the worst offender, but it can happen no matter what's running.  It can happen immediately after rebooting, too (I used to only have to reboot every few weeks, now it's several times per day)
    CPU load is 98% idle after it catches up, but once it catches up and the graph refreshes and I can see it was about 60% user load and 15% system while it was choking on the monumental task of opening the "File" drop-down menu
    There are 482 threads and 129 processes.
    This is the original unibody Mac with 2.4 ghz core 2 duo. It's been upgraded with 4GB of ram (2.7 used) and a 1TB hard drive.  I did those upgrades 2 years ago and they've worked fine until recently.  Clicking  "get info" on the HD says 333 GB are free, but under "about this mac" it says 121 GB are free and 211 are used for "backup".  I'm running OS-X 10.9.2 and it says there are no updates to install.
    I've reset system manager
    I've reset PRAM
    I've fixed disk permissions.
    No effect
    I know I don't have the speediest machine, but even a mid-80's mac could smoothly handle a drop-down menu, and this is a recent problem.  I'm at a loss here, guys. Any idea? My computer is quickly becoming unusable!

    Great- Thanks!  Here's the info...
    Hardware Information:
              MacBook Pro (15-inch, Late 2008)
              MacBook Pro - model: MacBookPro5,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
              NVIDIA GeForce 9600M GT - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 3:17:46
    Disk Information:
              SAMSUNG HM100UI disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (121.34 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-868 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple, Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    Thunderbolt Information:
    Gatekeeper:
              Anywhere
    Kernel Extensions:
              [not loaded] com.parallels.kext.prl_hid_hook (4.0 3522.205912) Support
              [not loaded] com.parallels.kext.prl_hypervisor (4.0 3522.205912) Support
              [not loaded] com.parallels.kext.prl_netbridge (4.0 3522.205912) Support
              [not loaded] com.parallels.kext.prl_usb_connect (4.0 3522.205912) Support
              [not loaded] com.parallels.kext.prl_vnic (4.0 3522.205912) Support
              [not loaded] com.roxio.TDIXController (1.7) Support
    Startup Items:
              FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.google.keystone.daemon.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
    Launch Agents:
              [running] com.canon.MFManager.plist Support
              [loaded] com.google.keystone.agent.plist Support
    User Launch Agents:
              [failed] com.adobe.ARM.[...].plist Support
              [loaded] com.facebook.videochat.[redacted].plist Support
              [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
              [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
              [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
    User Login Items:
              Temperature Monitor
              Quıcĸsıɩⅴεʀ
              WDQuickView
              HP Scheduler
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.3.1.18536 Support
              Google Earth Web Plug-in: Version: 6.1 Support
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
              Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
              FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
              iPhotoPhotocast: Version: 7.0
              googletalkbrowserplugin: Version: 5.3.1.18536 Support
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewer: Version: 9.5.4 Support
              CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
              GarminGpsControl: Version: 2.8.2.0 Release Support
              SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 Support
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins:
              TuneUp Visualizer: Version: 2.4.0 - SDK 10.7 Support
    User Internet Plug-ins:
              fbplugin_1_0_3: Version: (null) Support
              WebEx: Version: 1.0 Support
    3rd Party Preference Panes:
              Fan Control  Support
              Flash Player  Support
              Flip4Mac WMV  Support
              Growl  Support
              MacFUSE  Support
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 817.71 GB
              Destinations:
                        Time Machine Backups [Local]
                        Total size: 3 
                        Total number of backups: 22
                        Oldest backup: 2014-03-12 09:26:21 +0000
                        Last backup: 2014-04-07 15:52:25 +0000
                        Size of backup disk: Excellent
                                  Backup size 3  > (Disk size 930.71 GB X 3)
                        Seagate-40A98A TM Backup [Network] (Last used)
                        Total size: 4 
                        Total number of backups: 34
                        Oldest backup: 2014-03-12 09:26:21 +0000
                        Last backup: 2014-04-21 16:19:38 +0000
                        Size of backup disk: Excellent
                                  Backup size 4  > (Disk size 930.71 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   0%          Google Chrome
                   0%          TemperatureMonitor
                   0%          WindowServer
                   0%          fontd
                   0%          FanControlDaemon
    Top Processes by Memory:
              324 MB          Finder
              123 MB          com.apple.IconServicesAgent
              119 MB          Google Chrome
              90 MB          mds_stores
              79 MB          com.apple.WebKit.WebContent
    Virtual Memory Information:
              125 MB          Free RAM
              1.58 GB          Active RAM
              1.51 GB          Inactive RAM
              552 MB          Wired RAM
              2.23 GB          Page-ins
              0 B          Page-outs

  • Painfully slow internet after upgrading to Snow Leopard

    hi all, i recently upgraded to Slow leopard.
    My internet has soon become painfully slow, taking (literally) minutes to load pages. I have checked my modem & router, they seem to be fine as my iPhone & Vista laptop run perfectly on the same network.
    does anybody know what this could be?

    If you have not done so since upgrading to Snow Leopard, you should run Disk Utility and use +Repair Disk Permissions+.
    Have you used Software Update to apply Apple's latest updates after upgrading to Snow Leopard. If there are updates, you should run it a second time to ensure there were no dependent updates.
    As a test, you can create a new admin user account in System Preferences Accounts pane.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    Log out and log in to the new account. Try the things that caused the problems. Is it fast in the new account, or is it the same? If it is fast, then the cause is likely to be in your normal user account. If it is the same, then the cause is likely to be with the overall system (the OS).
    You can also try doing a Safe Mode startup
    http://support.apple.com/kb/HT1455
    This will do some maintenance during startup and also load only Apple's essential system extensions and processes. Any third party software you have installed will not automatically run. Check the performance while in safe mode, and if there is improvement, restart normally to see if the problem comes back or not.

Maybe you are looking for

  • Does apple needs to make a external hard drive?

    me personally. i think if apple would make a external hard drive or make the ipad/iphone/ipod compatible with a third party hard drive i wouldnt have a need for a computer the apple system would be a all in one. Im going to get a ipad 2 but was inter

  • CAN I GET AN UPGRADE FOR MY OJ PRO 8600 TO A 8600 Preium

    I have a hp OJ 8600 pro eprint can i buy and upgrade to a 8600 pro preium.  I would to be able to scan duplex.

  • Monthly wise sales report

    hai,      i m working on sales report where in i need to get month wise sales of the products and the related cost incured to company by the sales in the matrix form as shown below  can u help me in which way can i get this monthly report           m

  • Is it possible to create views with parameters ?

    Hi, As MS-Access, is it possible to create views with parameters ? Ms-Access syntax : parameters [a] text; select * from table where code = [a] If yes, can you give samples ? Regards Pascal

  • Trying to set up redirect and A Record to mask BC in URL

    We've gotten this far with our domain provider, but I'm not sure what to do next in BC. Our redirect is getting a No Start page. Our BC URL is: http://betheldualenrollment.businesscatalyst.com This is from our DNS provider: Ok, the A Record has been