Boot screen messages

I just want to know if I can enable boot screen messages like at boot installation media because I do not have any after install only some systemd clean messages.

I disabled quiet option in grub configuration and now it's working as it should . I haven't enabled quiet option so it has to be default behavior of grub instalation. Thanks for help.

Similar Messages

On boot screen messages - How to read after boot?[SOLVED]

Hi,
On boot. I see an error message but it scrolls by too fast. I can't find any reference in the log files. How can I read the screen messages on boot?
macroron
Last edited by rv2733 (2008-08-10 22:15:00)

lucke wrote:
If it's kernel message, it should be in dmesg (run command "dmesg").
If it's Arch's message (white bold text), you can disable clearing the first virtual console by removing the first line in /etc/issue (you'd better "cp /etc/issue /etc/issue.back" before doing that). Press ctrl-alt-f1 to see the first virtual console.
Thank You,
I removed the first line in /etc/issue after backing up /etc/issue to /etc/issue.back. Then rebooted.
Now I can see Arch's messages (white bold text) on ctrl-alt-f1.
macroron

My iPad Mini was locked up today (for the first time) on a boot screen, with a Debugger Message: Panic. Should I bother trying to fix, or return to store?

My iPad Mini locked up for the first time today. A boot screen, with among many other things, a Debugger Message: Panic. Is there a fix for this even though I can't seem to even get it to reboot past this error, or am I wasting my time and need to return it?

if it is still within the return period, return it. Why try and fix a new iPad.

Gray Boot Screen with progress bar & SMC Issues

Hi All,
Over the last few days I've experienced the grey boot screen with progress bar three separate times after the finder froze and I was forced to manually reboot my imac. Previously I have only seen this during a Firmware update.
I am also concerned about the Finder freezing. It has been happening when I've been trying to access any of my external hard drives at random intervals (connected via usb, and f800). I am concered that my SMC controller might be failing as these drives are testing fine on other computers and in drive test programs. Also, the f800 drives have been self unmounting.
I had my internal drive replaced by apple a few weeks ago, could they have somehow damaged the smc controller unintentially? Or is this simply a Snow Leopard hiccup? (I'm running 10.6.2). I'm really starting to get annoyed with having to hard reboot or constantly reset my SMC. Any ideas before I take it in to a store?
Thanks!
Message was edited by: fkick1

I have found other users have this same problem when using windows. My setup worked fine until I did a windows update. Now apple partition is inaccessible. Guess the windows update whacked the apple partition. Apple should have a workaround. Bad Windows!

Curve 9300 Doesn't start. Stucks at boot screen

Hi,
I've got a brand new Curve 9300 less than a week ago. I've updated it's OS to version 6, and it worked perfectly.
When I attempted to configure my email, it automatically asked to update with my carrier's email setup software. I just chose ok. I got three warning messages, which I don't exactly remember but it was about something may not function correctly (regarding to version difference). I just continued installation, and it asked for a reboot.
When I rebooted the mobile, it goot stuck at the boot screen. Then nothing! The thin status bar bellow BlackBerry's logo fills up until it's full, then nothing happens. When I wait for longer time (a few minutes), I get a message on a white screen with a tiny font with "App Error 606", with one option of 'RESET'.
I pulled out the battery and restored it a few times, nothing different.
Notes:
The LED does not do anything, except for a single red blink when it reboots
The keboard seems to be responsive. I get the Alt and Shift indicators in the top right corner when I press them
The power button doens't seem to cause any response
I appreciate your help.
Edit: The Desktop Software shows that the device is not connected, even though it's attached to the USB cable.
Edit: The Alt-Shift-Del combination causes the system to go to a blank white screen with that "app error" mentioned above
Solved!
Go to Solution.

You will need to use BBSAK or JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Installation stuck at grey boot screen on Macbook Pro 4,1 (Early 2008)

Hey guys,
I would appreciate any help you guys can give me since I would really like to upgrade my laptop to Mountain Lion.
Computer: Macbook Pro 17" 4,1 (Early 2008)
RAM: 4 GB RAM
Hard drive: 128 SSD Hard drive
Video card: NVIDIA GeForce 8600M GT
Current OS: Snow Leopard 10.6.8
Step I have taken but failed to properly install the OS.
Dowloaded Mountain Lion at least 3 times from the App store to make sure the download wasn't corrupted.
I even tried making a Lion Bootdisk so I can install Mountain Lion on a USB drive (Install ESD.dmg).
I have even tried installing Lion first thinking I would take it one version at a time but gets stuck on boot screen too.
I even changed my hard drive to an SSD drive to see any difference.
Each time I install Mountain Lion or Lion, everything is good until the installer has to restart the laptop.
Laptop gets stuck at the grey boot screen with the Apple logo and the loading circle. Nothing ever happens after.
Even waited for 7 hours but no changes in the boot screen.
I always had to use/boot to the Snow Leopard CD so I can restart the laptop back to the Snow Leopard drive.
What can I do? I would appreciate any help at all.
Thanks!
John

When I do safeboot I get this endless message "ERROR: Firewire (OHCI) TI ID 8025 built-in: handleUnrecoverableErrorInt"
I don't have any firewire cable connected.
Any ideas?

Windows partition not availible on boot screen

Windows has installed and works great, except I can only access it if it's the default on start up. When I press option, the only option I see is the default mac partition.
I can see the drive on my desktop as well as in Preferences >> Startup disk, but not on the boot screen.
The partition was created with the bootcamp assistant and is FAT 32.

I have the exact same problem. I just bought a new Macbook (with the "Santa Rosa" processor) and installed Windows XP. Everything in both Mac & Windows OS work fine except when I boot up the computer and hold down the OPTION key, I only see the Mac OS partition but not the Windows partition. I've made sure to install (and even re-installed) the Apple drivers in Windows from my Macbook installation disk.
I use a workaround and choose WINDOWS as my startup disk in my SYSTEM PREFERENCES in the Mac, and use the BOOT CAMP control panel in Windows to go back to the Mac. But I used to be able to use the OPTION key prior to the Leopard upgrade. Any help anyone can provide will be much appreciated!!
Message was edited by: macrick1

AUDIGY 2 zs comp freezes at end of boot screen H

I built this computer p23g motherboard, pentD 3.0. So I loaded my counterfit XP PRO and my video card didnt work. Radeon 9250 DVI/VGA. The audigy was in the machine and booted fine but I didnt hook speakers to it yet,as I needed this video card to work.Long story short I had to Buy XP PRO sp2. First thing the video card worked great but putting the Audigy2zs makes the computer freezeat the end of the boot screen. However I did get it to work by slipping the card in just after bootup but before windows loads (scary I know). Go to device manager and scan for hardware changes and it detects the audigy and can install software. Problem is I cant turn off my computer ever again, except to repeat the procces. on boared audio is off in bios. Did all sp2 and board and creative updates but it just seems its not being reconized as a pci card or something. I've contacted cust support at pc chips and they are no help. They act like there botherd to answer questions about products, Microsoft cant explain it and I havn't seen any forums that cover this. Can anyone help? .. MikeMessage Edited by custsupsucks on 04-7-2007:34 PM
Message Edited by custsupsucks on 04-8-20072:47 PM
Message Edited by custsupsucks on 04-8-20072:52 PM
Message Edited by custsupsucks on 04-8-20072:53 PM

OK. I contacted PC Chips because an bios update didnt work, They say its not the bios? and they thought one thing could be the power supply. So I disconnected my extra hard dri've and cd roms and the same result.At least the person I got this time wasn't in a hurry to get off the phone. I have tried the Audigy in my other computer and it works.My machine (new one) booted up with the card in, as sometimes it will do,scan hardware for changes and it see's it. I am using the card right now and it works great,so I dont think its the card. I just cant reboot or on the bootup screen stops at NVRAM UPDATE : OK...... pc chips doesn't seem to be any help. I tested all pci slots and they work so they think its not their problem. If the card works (plays music in all channels) I dont understand why it freezes on bootup. Can the card be bad in any way if it is able to function like it is? Can it be bad and work in one computer and not another?Mike P.S. I also tried the msconfig, booting up with minimal startup items and its the same.Message Edited by custsupsucks on 04-8-20072:50 PM
Message Edited by custsupsucks on 04-8-20070:22 PM

Disable network boot screen in KT4V-L

well this is more of an annoyance than a problem . . .
i was booting up a few days ago and on the screen where u can press (BIOS 1.5 and previous) or (BIOS 1.6) to boot from a network . . .
now i decided to venture into this menu and played around with the options and now a new option comes up after the / screen comes on . . .
it now says something like "press to boot from hard disk" . . . now is there a way to disable this message of booting from the hard disk? or the whole network booting option at all?
my pc boots up fine and i haven't experienced any problems but it just takes up a lot more time to boot into windows . . . i've tried every bios setting possible from disabling everything in the boot menu order, to disabling the network adapter . . . now the only thing that works is by disabling the onboard adapter which i use . . . i've also tried flashing to other bioses in hopes to reset it but it hasn't done anything . . .
does anyone have any suggestions on how to disable this?

oh this is before windows even loads up . . . it's a message from the bios/lan rom itself asking to press to boot from the hard disk or pressing to boot from a network . . . in fact, i get no slowdowns going into windows at all . . .
when u do a cold boot, u get the following screens:
1. the main post screen where u're ide devices get detected
2. the screen that i described above comes up where u press and for network booting
3. the computer configuration info (pci devices, cpu, cache info, etc)
4. boot record search from the floppy/hd/cdrom
5. windows boot screen
it's screen #2 that i'm trying to disable . . .

Disable winki automatic boot screen

First time PC builder here. Had the mobo for about 4 months and loving it. However, I went in to the BIOS to tweak some things, installed a SSD and now I'm getting a winki boot screen with a 5 second countdown. That, along with a choose which windows installation 5 second count down, I'm losing 10 seconds of my day! Can I disable this winki screen and just go straight to booting windows? I poked around in the BIOS and couldn't find a setting to skip the winki loader.
Thanks!
EDIT: P67A-GD80B3

oh this is before windows even loads up . . . it's a message from the bios/lan rom itself asking to press to boot from the hard disk or pressing to boot from a network . . . in fact, i get no slowdowns going into windows at all . . .
when u do a cold boot, u get the following screens:
1. the main post screen where u're ide devices get detected
2. the screen that i described above comes up where u press and for network booting
3. the computer configuration info (pci devices, cpu, cache info, etc)
4. boot record search from the floppy/hd/cdrom
5. windows boot screen
it's screen #2 that i'm trying to disable . . .

Boot screen question

Does any one know what the following message is that I get in the boot screen during boot up
"Warning: having option rom can not be revoke (vendor id:10deh, device id:00dfh) I have this message after installing XP64 bit. Willie

Quote from: Okay on 12-January-06, 06:12:32
Is'nt this the message appering with some beta bioses?
It's a fault in all 1.9 , 1.A ,1.B bioses , offilcal and beta , fixed in 1.C3 .
xp64 has nothing to to with it .
Disabling nvidia lan and/not using an addon pci ide/sata card make the "message" go away , but the error is still there
in those bios revisions.
To have the invoke boot option rom solved use all bioses upto 1.8 or 1.C3 .

HP w1907 : Powering-up gets stuck at blue "HP invent" Boot Screen

Hello all,
I've HP w1907 desktop... I am using it since 2008.
Last month I've format it to have new windows 7 Ultimate in it... Previously also I was using win7 Ultimate.
But it was keep restarting after the use of 4-5 minutes and so I've installed the OS all over again.
It was working fine... after 3-4 weeks, when I started it, it gets stuck at blue "HP invent" Boot Screen.
This screen has the instructions for entering the "Boot Menu", "Setup", and "System Recovery" by pressing the "Esc", "F10", aor "F11" key. It just sits there forever.
If I try to enter the "Boot Menu"by pressing the "Esc" key, I get a message "Loading Boot Menu.....", but then it just hangs there forever. If I try to enter the "Setup Menu" I get a similar result - it says "Entering Setup...", and just hangs there. Pressing the "F11" key doesn't seem to do anything.
Any ideas on how to fix this?
By searching forums I've tried resetting the BIOS - which I've got from here :
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Powering-up-gets-stuck-at-blue-quot-HP-in...
and
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01080282&tmp_task=prodinfoCategory&cc=us&dlc=en...
After doing this also, the result is zero
Please help me...
I am in hurry...
Thank you.
This question was solved.
View Solution.

Hello Sir,
You was right...
The CMOS Battery was discharged!
I've replaced it ... and the date and time problem has been solved...
And you was right again by saying that it should not cause the problem while start up...
So the second problem (Major Problem) was CD Writer !!!
(I've changed the location of the PC last 3-4 weeks ago!!)
may be the it has grabbed the hardware of CD Writer..
And as the hardware of CD Writer was not working as per the expectation the BIOS may have got stuck...
And so it was unable to enter in Boot or Setup menu !!
I've removed the data and supply cord of CD Writer... PC is working good now...
I am thankful to you sir.. for your thourough help..
Without you it may not happened
Now I am going to repair the CD Writer by opening it tomorrow..
Any help from you will be great help to me and its really appriciable..
God Bless You...
Thanks for your valuable time.

ThinkPad hangs on boot - stuck at Lenovo boot screen

I'm experiencing random boot issues with a brank new thinkpad yoga 20CD0038PB win 8.1 pro. Once the system stalls on the boot screen the fn light stays on and I cannot even access bios. Powering down and keeping power button pressed for several second doesn't help either, However If I leave the computer powered down for and hour or longer it usually boots like nothing happened. Then the issue comes back intermittently with a restart or sometimes a preceeding blue screen.
Sometimes when the issue occures it also reports hdd0 error, and lenovo sent me a new hdd which I replaced that this has not fixed the issue.
I have the latest BIOS GQET29WW 1.09. I've run memory and disk tests using Lenovo Solution Center and memory tests in bios and they were ok.
On the BIOS download page I've found references to some issues regarding boot hangs with earlier versions of bios (1.7).
At this point I'm stuck. Anyone experiencing similar issues?

I am also experiencing this problem Like the OP, it seems random and has occured from day one.
Boots to Lenovo Screen
Fails to show spinning circle
F1 light stays on
Nothing further happens (longest I have left it for is ~ 5 min).
If I hold the power button down for several seconds, I can switch the machine off. Usually waiting 30-60 seconds and re-starting is sufficient for a normal boot and start up. On occassion, I have to go through the shut down cycle twice before I can successfully start the computer.
Unlike the OP, I have not seen any error messages, or blue screen.
System Info:
20CDCT01WW
Windows 8.1 Pro
256gb/8gb
Emdedded Controller Version 1.09

Blackberry Bold 9900 stuck on boot screen

Hello,
My BB Bold 9900 has been stuck on the boot screen for a long time now - each time i re-insert the battery or conect to a power supply the the boot screen comes up starts to load and then stops just above the 'bavck' button and then stays like that fior ever untl i unplg or take the battery out.
I have put in new batteries but it still does the same, it has been left of for a while due to being out the counrty and when i came back to turn it on the above keeps happeneing.
I have conected it to the BlackberryDesktop manager with out battery and i get a pop up asking to 'repair' 'updater' or 'cance' . when i select repair it wount do anything and update starts and then ask me to update software etc and each time i select the update it comes back with an error and im unable to do so anymore.
Please help somebody.
Regards

This process will erase all data in your phone memory. Via JSanders.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
BlackBerry Device Operating System downloads: http://www.blackberryforums.com/blackberry-device-specific/
Just select the appropriate device model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
IF the above does not work or help, You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
Download JL_Cmder http://www.blackberryforums.com/rim-software/18789-jl_cmder.html
or download BBSAK http://bbsak.org/download.php
If JL_Cmder does not work, you can try this:
KB10144, http://www.blackberry.com/btsc/KB10144
and this: KB20371 http://www.blackberry.com/btsc/KB20371
Additional information:
http://www.blackberry.com/btsc/KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Article ID: http://www.blackberry.com/btsc/KB10144
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

After restoring imac from time capsule stuck at apple booting screen

Hello,
I had an IMAC with hard drive that crashed. I installed a new internal HD.
Restored from time capsule. After 10 hours of restoring, it restarted.
Now it has been stuck at the Apple boot screen with the spinning wheel now for 3 hours.
Does it take that long? Anything wrong maybe.
Thanks for all your help.

Hello Brenden,
Thanks for the link. I have already tried everything in that kink but still getting the same issue.
One clarification if you can help me.
When I replaced my HD, I booted up using Mountain Lion CD.
I went to Disk Utility I paritioned the new drive.
I then went to System Restore and tried to restore from my time capsule a backup from Yosemite, Maverick and Snow Leopard
When imac restarted i was getting messages that it cannot boot up..Same message over and over.
Therefore, I once again went in and booted up using Mountain Lion CD,
Went to Disk Utility and erased all contents of the whole drive. Clean.
This time I went ahead and ran the Mountain Lion Installer.
Imac restarted and booted fine to Mountain lion.
Did all updates and so forth.
Now went to Utilities folder and selected Migration Assistant and chose to restore once more.
Restored finished, and this time I am getting the issue I originally reported.
My question is, since I am running Mountain Lion, if the backup was made using Yosemite, just before my IMAC crashed,
is this the problem why it is stuck at Boot. Because i need to be running Snow Leopard at leat to upgrade to Yosemite.
However, how come none of my backup s can be restored , just by going straight to restore backup instead of installing some mac os x first.
Thanks,

Boot screen messages

Similar Messages

Maybe you are looking for