Boot Start Error

I have a G62 HP laptop/windows 7 home premium.
Sometimes my notebook wont boot and give me system boot error, how do I fix this?

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

R61 R&R won't start after "unmountable boot volume" error

Hello all,
New user, first post - after problem, of course.
I have an R61 Thinkpad with Windows XP on it. (SP2 or SP3, not sure). Has worked flawlessly for years, then the other day I got the dreaded "unmountable boot volume" error and it would not start.
No problem - I re-start, hit the ThinkVantage button, then hit F11 to use the R&R hidden on a separate partition of the hard drive........I get the black screen with the big progress bar, ok, then a blue screen......then nothing. Hangs up and sits there. I have repeated this about 5 times now.
No problem! - I was smart enough to make an R&R CD set a while ago! Put the primary R&R disk in the CD drive, start the machine, ThinkPad button, F12 this time to choose boot from CD.....much CD activity ensues and I once again get the black screen with the big progress bar. It takes much longer, and I get teh blue screen - BUT - then it goes one extra step to display the "ThinkVantage Rescue & Recovery 4" screen with the life preserver image.
Excellent, I thing - except it then hangs there. Just sits there. No disk activity. No keys will do anything.
I can find no threads here or on any other forum with this particular issue.
Am I fubar? Or is there something else I can do?
Thanks a bunch.
Solved!
Go to Solution.

Hi jim, welcome to the forums,
Is the hard drive recognised in BIOS, was there an entry in the boot list against HDD0?
Regardless of it being shown in BIOS / boot list or not, the first thing I would do is to reseat the hard drive and see if that helps, maybe over time it's lost contact to the mainboard socket. If you don't know how to do this you can find out at the R61 movies site.
The next thing I would do is run a hard drive diagnosis check from a bootable cd, these can be downloaded from all HDD manufacturer's websites e.g. Hitachi's Drive Fitness Test. It may be that the drive has simply gone bad after all those years of work.
Let us know how you get on
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Windows failed to start error

Windows failed to start error
I am running a Compaq mini 110c netbook and the following error message occurred on start up. The netbook does not have a slot for a disc as everything was in the netbook already. I am a complete technophobe and need help to restart my netbook.
windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows instalation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
Status: 0xc000014c
File: \Boot \ BCD
Status: 0xc000014c
Info: An error occurred while attempting to read the boot configuration data.
Help please!!! Answers must be in plain everyday language that I can understand!!!

The following 2 links should help with the issues you are having. I would suggest attempting a system restore first (not I repeat not a system recovery) make sure you are doing the restore option or you will lose everything.
Click the option to "Using System Restore when Windows 7 cannot start normally"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&lc=en&cc=us&dlc=en
The below link is for other basic troubleshooting that might help if the above doesn't work:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Hopefully the steps are basic enough for you to understand and help out. Thanks
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

WinProducer2 start error, won't run with nVidia Capture drivers

I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18) installed, or the 1.22 version from nVidia's website (as of 2-20-03), and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results! ???
Anybody else having this problem?
This is under Win2k, w/SP2, then added SP3, with no improvement.
Stenn

After I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

No Bootable Device - Insert Boot Disk Error...

Ok so today I installed Windows 7 Ultimate 64-Bit on my 750GB Toshiba HDD in my Optibay and was installed successfully, installed all the Drivers from Windows Support flash drive and when I try to reboot into Windows 7 I get the "No Bootable Device - Insert Boot Disk Error" everytime!! lol What the heck is going on here??
Specs:

lennarts wrote:
So, I encountered the same problem...
When I click the icon in bootcamp to install windows, after a bit of activity the Windows installation disc was spit put, the screen goes black and the error "No Bootable Device Insert Book Disk Press Any Key to Continue" appears on the screen. And nothing else but using the OSX installation disc helps.
I realised that the windows installation disc did not even spin up.
So what I did... I went back to OSX, reinserted windows installation disc, went to system preferences, selected the windows cd as a start up disc and locked it against the changes.
After that I went back to bootcamp and clicked gain to install windows. Everything worked fine now.
I just tried this and it didn't work for me. I keep getting a black screen with a cursor flashing in the upper left hand corner.

All Windows I Install return boot\bcd error

Have a l645d-s4040.
Im Lost now.. I've read many threads similar to my problem, or exactly like my problem. Ive tried it all, and done at least 12 Different installs. heres the info:
Bought it brand new, was unaware of making the restoration disks until it was too late.
I had a virus, so I did "clean all" in diskpart, at the cmd prompt. So i can start fresh. I have a retail version of Windows 7 Home Premium 64 bit, which was the original OS. went through the installation process fine, until the reboot where its supposed to go through the second step of the installation. on reboot i get a "bcd\boot" error. Ive tried repairing the MBR, the Boot record, ive tried using align=1024, ive tried using paragon, and acronis to fix the boot record. Ive tried using boot managers. Ive tried installing windows vista, ive tried windows 7 ultimate 64 and 32 bit versions.. the only OS i can get to install is XP.. Im at a loss
of course of done : Startup Repair (http://www.sevenforums.com/tutorials/681-startup-repair.html)
So after the first step of of installation, which goes fine then reboots to continue the installation i get:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click “Next.”
3. Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue ESC=Exit
so i reboot with the install cd. which i downloaded from www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct- download-links-ultimate-professional-and-home-premium/.
And ran the startup repair, first time no OS found and failed to save startup options. rebooted and this time the repair worked and it booted fine running the 2nd step of the installation process.. on the reboot i got same boot\bcd error.. so i repeated the repair steps above.. it finally booted and finalized the installation.. i got to the desktop fine and installed all my drivers. when i rebooted i got the same error.
WHATS UP WITH THIS???

Satellite L645D-S4040
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media, which you can obtain from Toshiba.
Order Toshiba Recovery Media
-Jerry

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

MacBook Air will not boot. Error Message says "Your Computer restarted because of a problem."

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

Java Web Start Error in through codebase url with SSL

I have created one Java web-start plugin application in swing which is launched from PHP site at browser plugin.
All things were working fine, but when we implemented SSL in our site it stopped working. And when we try to start the application from browser it thorws error like:
Unable to launch Application.
In Java console it puts following log:
JNLP Ref (...): NULL !
#### Java Web Start Error:
#### null
Following is my JNLP file:
<jnlp spec="1.0+" codebase="https://<<server_domain>>/MyPlugin/">
<information>
    <title>Test Plugin</title>
    <vendor>The Java(tm) Tutorial</vendor>
    <homepage href="null"/>
    <description>Test Plugin</description>
    <description kind="short">Test Plugin</description>
    <offline-allowed/>
</information>
<security>
    <all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
    <java version="1.7+"/>
    <jar href="http://<<server_domain>>/MyPluginJar.jar" download="eager" main="false"/>
</resources>
<application-desc>
    <argument>test</argument>
    <argument>test</argument>
    <argument>test</argument>
    <argument>test</argument>
    <argument>test</argument>
</application-desc>
</jnlp>
The issue started only after implementation of SSL in our site. Please provide any solution for this. Many thanks in advance.
P.S. My Jar file is signed by third party authorized certificate.

Have you tried using Rosetta?

Unmountable Boot Volume error in Z61T

Hi Members,
I just encountered the the Error Unmountable Boot volume error(Blue Screen) in my Z61T Think pad laptop.
I'm not sure what caused this error. Is it possible to fix the error?
I tried to go in to Recovery Console using XP CD and then repair the OS, but unfortunately when i go to repair mode i get another error which says unable to recognize the hard drive. Im really confused as of what is the exact problem with my laptop and also im worried about that data.
appreciate if anyone can throw some light in to the issue and help me out in fixing the same.
Thanks
Rajesh

If you believe that your hard disk/file system may be corrupted, try using any bootable diagnostic cd.They are operating system independent and will let you know if your HDD is getting corrupted.
Try the data life guard diagnostics(bootable).
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Apple Mobile Device service is not started error 1067

Apple Mobile Device service is not started error 1067 in Windows 7.

Thanks Ryan Sensei. I followed your link. Though I didn't have any Megaupload software installed on my computer, I saw a related article on http://senseiphone.com/fix-apple-mobile-device-not-started_itunes-0315129/ which was my actual problem and fixed it perfectly.

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

How to correct "service 'apple mobile device' failed to start" error?

How to correct " service 'Apple Mobile Device' failed to start" error?

How to restart the Apple Mobile Device Service (AMDS) on Windows
Solving MSVCR80 issue and Windows iTunes install issues.

RFC adapter not started (Error starting AS Java Service XPI Adapter)

Dear Experts,
We have recently Upgraded our sustem from XI3.0 to PI 7.1, and have encountered a peculiar error in RFC adapter which could not be started
error says: Error starting AS Java Service XPI Adapter: RFC
corresponding instance when started says
Error starting AS Java Service XPI Adapter: RFC on DVEBMGS00
Hence our RFC channels are not functioning
Please help
Regards,
Rana De

can you try to restart XPI Adapter:RFC in NWA. if still it throws error then try to restart java stack.

Distiller Start Error, Time-out occured

We are using Acrobat distiller 7 in our Formscape/Bottomline
Project. The incoming file is a pdf from JDE OneWorld XE. WHen Formscape tries to create the pdf, it has an error that says "Distiller start error. time-out occured."
Has anyone else had this issue? What could be causing it? and How do I fix it? Distiller 9 doesn't work with Formscape/Bottomline. I haven't tried 8

This forum is for issues relating to Distiller Server, not Acrobat Distiller. Please repost in the Acrobat Windows forum.

Boot Start Error

Similar Messages

Maybe you are looking for