Boot up 10.6.8 imac...start up disk stuck in disk drive

I shut down my imac...for 2 days...came back and it won't boot up...there is power and sound - I can hear it working but the screen in black...I put in a start up disk and held down C but now that disk is stuck in the computer ...and I can't eject it...any ideas how to proceed...most of my material is backed up...but it would be really great to get it back working...Any key strokes or tricks to get it...out of its loop?  Sweetspirit

If it's still running force it to shut down by holding the power button in for about 6-10 seconds. Then restart while holding the mouse button down to eject the disc.

Similar Messages

  • Imac Starting To Slow And Increase Hard Drive Paging

    Hello,
    I have been noticing that my computers seems to be getting slower, and also I am noticing much more hard drive paging, to the point where it is a concern. I do not do any graphics or high intensity CPU usage on this computer. I have run the disk utility from the Mac, and no issues found. Is this a sign that the hard drive might be failing? Or do I just reinstall operating from scratch?If hard drive failing, on this computer, can I put one of the new solid state drives?
    Thanks JR
    System:
    Yosemite 10.10.1
    Processor 3.06 Intel Duo
    Memory 4gb
    Graphics ATI Radeon HD
    EtreCheck version: 2.0.11 (98)
    Report generated November 27, 2014 at 10:40:55 AM PST
    Hardware Information: ℹ️
    iMac (27-inch, Late 2009) (Verified)
    iMac - model: iMac10,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
    BANK 0/DIMM0
    empty empty empty empty
    BANK 1/DIMM0
    empty empty empty empty
    BANK 0/DIMM1
    2 GB DDR3 1067 MHz ok
    BANK 1/DIMM1
    2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Video Information: ℹ️
    ATI Radeon HD 4670 - VRAM: 256 MB
    iMac 2560 x 1440
    System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 0:8:55
    Disk Information: ℹ️
    Hitachi HDS722020ALA330 disk0 : (2 TB)
    S.M.A.R.T. Status: Verified
    EFI (disk0s1) <not mounted> : 210 MB
    Macintosh HD (disk0s2) / [Startup]: 2.00 TB (1.85 TB free)
    Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    PIONEER DVD-RW DVRTS09 
    USB Information: ℹ️
    Western Digital My Book 1110 999.5 GB
    S.M.A.R.T. Status: Verified
    EFI (disk1s1) <not mounted> : 210 MB
    Time Machine (disk1s2) /Volumes/Time Machine : 999.16 GB (508.75 GB free)
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    Configuration files: ℹ️
    /etc/hosts - Count: 3
    Gatekeeper: ℹ️
    Mac App Store and identified developers
    Kernel Extensions: ℹ️
    /Applications/SmartSwitch.app
    [not loaded] com.devguru.driver.SamsungACMControl (1.4.11 - SDK 10.6) Support
    [not loaded] com.devguru.driver.SamsungACMData (1.4.11 - SDK 10.6) Support
    [not loaded] com.devguru.driver.SamsungComposite (1.4.11 - SDK 10.6) Support
    [not loaded] com.devguru.driver.SamsungMTP (1.4.11 - SDK 10.5) Support
    [not loaded] com.devguru.driver.SamsungSerial (1.4.11 - SDK 10.6) Support
    /Library/Extensions
    [loaded] org.virtualbox.kext.VBoxDrv (4.1.0) Support
    [not loaded] org.virtualbox.kext.VBoxNetAdp (4.1.0) Support
    [not loaded] org.virtualbox.kext.VBoxNetFlt (4.1.0) Support
    [loaded] org.virtualbox.kext.VBoxUSB (4.1.0) Support
    /System/Library/Extensions
    [loaded] com.dvdfab.kext.fabio (1) Support
    [not loaded] com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
    [not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
    [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
    /System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns
    [not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
    [not loaded] com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
    [not loaded] com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
    [not loaded] com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
    [not loaded] com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
    /Users/[redacted]/Library/Application Support/Sparkle/Transmit/Transmit 680 Update/Transmit.app
    [not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.5) Support
    Launch Agents: ℹ️
    [not loaded] com.adobe.AAM.Updater-1.0.plist Support
    [loaded] com.citrix.AuthManager_Mac.plist Support
    [running] com.citrix.ReceiverHelper.plist Support
    [running] com.citrix.ServiceRecords.plist Support
    [loaded] com.hp.messagecenter.launcher.plist Support
    [running] com.hp.productresearch.plist Support
    [loaded] com.lexmark.bmlaunchd.plist Support
    [loaded] com.lexmark.lexnetlaunchd.plist Support
    [invalid?] com.motorola.MDMUpdater.plist Support
    [running] com.motorola.motohelper.plist Support
    [loaded] com.motorola.motohelperUpdater.plist Support
    [invalid?] com.oracle.java.Java-Updater.plist Support
    [running] com.rim.BBLaunchAgent.plist Support
    [loaded] org.macosforge.xquartz.startx.plist Support
    Launch Daemons: ℹ️
    [loaded] com.adobe.fpsaud.plist Support
    [invalid?] com.adobe.SwitchBoard.plist Support
    [invalid?] com.motorola-mobility.mmcfgd.plist Support
    [failed] com.mysql.mysqld.plist Support
    [invalid?] com.oracle.java.Helper-Tool.plist Support
    [running] com.rim.BBDaemon.plist Support
    [loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
    [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    User Launch Agents: ℹ️
    [loaded] com.adobe.AAM.Updater-1.0.plist Support
    [invalid?] com.adobe.ARM.[...].plist Support
    [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
    GrowlHelperApp UNKNOWN (missing value)
    Canon IJ Network Scanner Selector EX UNKNOWNHidden (missing value)
    Dropbox Application (/Applications/Dropbox.app)
    TwonkyMediaServer Application (/Applications/TwonkyMediaServer.app)
    KiesAgent UNKNOWNHidden (missing value)
    fuspredownloader UNKNOWNHidden (missing value)
    Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    Music Manager UNKNOWNHidden (missing value)
    Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
    Music Manager ApplicationHidden (/Users/[redacted]/Library/PreferencePanes/MusicManager.prefPane/Contents/Helpe rs/MusicManagerHelper.app)
    Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 2.3.5.4 Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    AdobePDFViewer: Version: 10.1.2 Support
    QuickTime Plugin: Version: 7.7.3
    CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
    nplastpass: Version: 2.5.5 Support
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    Silverlight: Version: 4.0.50826.0 Support
    iPhotoPhotocast: Version: 7.0
    User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0 Support
    WebEx64: Version: 1.0 - SDK 10.6 Support
    Safari Extensions: ℹ️
    LastPass
    3rd Party Preference Panes: ℹ️
    Flash Player Support
    MacFUSE Support
    MusicManager Support
    MySQL Support
    Web Sharing Support
    Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
    Macintosh HD: Disk size: 2.00 TB Disk used: 146.80 GB
    Destinations:
    Time Machine [Local]
    Total size: 999.16 GB
    Total number of backups: 154
    Oldest backup: 2012-11-02 01:12:05 +0000
    Last backup: 2014-11-27 15:20:34 +0000
    Size of backup disk: Adequate
    Backup size 999.16 GB > (Disk used 146.80 GB X 3)
    Top Processes by CPU: ℹ️
    17% App Store
    9% WindowServer
    8% Google Chrome
    4% twonkymediaserver
    4% com.apple.WebKit.WebContent
    Top Processes by Memory: ℹ️
    219 MB Google Chrome
    193 MB thunderbird
    190 MB mds_stores
    90 MB ocspd
    82 MB Dropbox
    Virtual Memory Information: ℹ️
    959 MB Free RAM
    1.85 GB Active RAM
    912 MB Inactive RAM
    569 MB Wired RAM
    7.43 GB Page-ins
    16 KB Page-outs

    Hello,
    Thank you very much for the reply. Is it possible I turn off some of the plugins? I do not think some are even used anymore?
    Thanks JR

  • IMac has a disk stuck and wont boot

    Hi all,
    My iMac has an installation disk stuck in the drive. Having been turned off, it now won't open in safe boot mood or some or the other short key problem solvers I have googled, and the disk won't eject. The opening screen doesn't even get to the spinning grey circle, just the main apple logo appears and the cd drive makes a repetitive noise.
    I dont know with where the problem lies, the non-booting computer or the non-ejecting disk. Please help.

    Have you tried booting up whilst holding down the mouse button until it ejects?

  • Is there an emergency eject hole on the newer iMacs. disk stuck in drive and computer won't boot.

    Is there an emergency eject hole on the newer iMacs? I have a disk stuck in the drive and the computer won't boot. Need to get this disk out to load repair disk.

    If you are getting nothing at all you should take it in for repairs.

  • 22" iMac desktop OSX 10.6.6 Snow Leopard and it won't boot. I've tried shift start, option command+P+R. It's stuck at the restart, all I see is the spinning wheel below the apple logo.

    I have a 22" iMac desktop running OSX 10.6  Snow Leopard and it won't boot. I've tried shift start, option command P R. It's stuck at the restart, all I see is the spinning wheel below the apple logo. And I lost my OSX DVD is there any way to fix this? I just did a software update yesterday and have about 20GB left on my Hard drive. The last thing I did was try to install some plugin's for Pro Tools 8, but it wouldnt let me install so I restarted and now I'm screwed. Please Help!
    other specs for my computer: 3.06GHz Intel core 2 duo processor 500 GB Serial ATA hard drive, iSight, magic mouse, wireless mac keyboard
    iPod classic 160GB (Late 2009), Mac OS X (10.6.6)

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • IMAC starts up w/ tone, then white screen , then 1 min later grey apple - nothing else. When I boot up holding shift, no tone, white screen, grey apple, then 1 min later prohibitory sign and pinwheel ...

    IMAC starts up w/ tone, then white screen, then 1 min later grey apple - nothing else.
    When I boot up holding shift, no tone, white screen, grey apple, then 1 min later prohibitory sign and pinwheel ... nothing else ?

    Tried disabling everything USB and FireWire and the Likes

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    Hi daveormond,
    I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
    Mac OS X: Gray screen appears during startup - Apple Support
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • Imac 27-inch 10.9 recovery disk will not start

    hello everyone,
    I am having boot up problems on my imac 27-inch.
    I pressed the power button and press and held the Option key, I chose the
    Recovery disk, but the Recovery disk did not start, instead I have the grey Apple logo and it keeps running but will not start.
    The imac 27-inch was bought refurbished in late 2010
    I also have imac apple care from 2010 never used. First time problem.
    On pressing the Option key during startup,
    Mach Hard disk and Recovery Disk 10.9 is displayed.
    Choosing mac hard disk does not boot up the OS instead I get a big Zero sign with line through it or a big flash question mark sign.
    Choosing the Recovery Disk 10.9 does not boot up Disk Utility, instead I get the grey Apple logo.
    Please help. Thanks.

    Your Recovery HD is damaged. You may be able to repair it using Carbon Copy Cloner 3.5.4. Under the Windowm menu select Disk Center. Select your boot volume from the list. Click on the Recovery HD tab then click on the Create a Recovery volume for this disk. Select Mavericks from the dropdown menu labeled "Recovery HD version to be applied." See if that works. If it does not then see Update - Create Lion RecoveryHD Partition Quickly Without Reinstalling | brunerd. Or see Recovery Partition Creator 3.7 – Updated for Mavericks ...

  • Why is my iMac Start up SSD Drive filling up without any use?

    I noticed yesterday that my main boot drive, my SSD drive, on my iMac was seriously depleting in memory without me doing anything or downloading anything either so much so that but 10pm last night it was saying my start up drive was full. I ran Disk Utility on the drive and it said I had a problem and should run in Recovery HD so rebooted the computer and ran it, it said it had fixed permissions so thought all was okay but after rebooting again the memory is still running down!
    I also tried erasing the disk and using Time Machine as a back up from a previous time, this had no effect. I thought it could be a Snow Leopard update that came in yesterday but that doesn't seem to be the problem as I have used a back up from before I updated...
    I'm literally watching the 'Used' numbers from the Get Info on my SSD drive go up infront of my eyes every few seconds.
    Any help would be much appriciated!

    In your Mountain Lion's Time Machine settings, you are now allowed to designate not just one only, but multiple Time Machine backup drives, though you don't have to.  I'm wondering if possibly your TM settings are backing up one of your internal hard drives both to your external hard drive AND to the internal SSD drive.  You might want to check to see if that is the case, and if so, change it.
    Hope this helps

  • Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
    If the screen comes on, basic graphics is working.
    The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
    When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
    What could be the problem depends on where in the process it stops, and whether the power light is blinking.

  • How to turn off sound when iMac starts up

    how to turn off or turn down sound when my imac starts up

    debrafromusa,
    This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to  boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
    Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

  • How do you eject a CD stuck in the drive from an imac that won't start?

    My Imac won't start. Its stuck on the Apple screen with the little gear going around. Other discussion have suggesting trying to boot directly from the install disc, which I want to try but can't because when it crashed there was a DVD in the optical drive and I now cannot remove it.
    Any suggestion on how to remove it as a first step to fixing the start up screen issue!

    Here is a collection of ways to eject a stuck CD/DVD from your Mac.
    How to Eject CDs or DVDs From Your Mac Even When They Are Stuck
    Tom
    http://macs.about.com

  • IMAC start issues: black screen and required to enter EXIT.

    At iMAC start I get black screen with Root directory and requested to enter EXIT to continue. This happens very frequently. Can somebody help me to solve this issue? Thanks

    I would suggest booting from the Recovery partition, choosing Disk Utilities, then running Repair Disk and Repair Permissions.  See if that clears this issue.
    Others may have suggestions, but if the above doesn't work you may need to reinstall Mountain Lion...again, from the Recovery partition.

  • IMac start up clicking noise and folder, won't work at all.

    For a long time now it turns on with chime, starts the clicking and than shows folder
    Every time for about 7 months. I don't know what to do, I don't have any discs for it ive had the iMac for 7-8 years
    Is there anything to do. And if I take it to Genius Bar do I get charged for the appointment?

    The folder with the question mark means that the computer cannot find an operating system to boot. The clicking sound you hear USUALLY means a bad hard drive. If your hard drive is damaged or failed, there is usually no way to boot from it. Someone with the correct tools and software may be able to salvage the data on the hard drive, best case. At the very least, you will have to replace the hard drive. I would recommend and expert in any case. Good luck. Hopefully, you had all of your important things backed up.

Maybe you are looking for

  • Adding one setting to multiple files?

    I am new to Compressor.  Is there a way to add one setting to multiple files in the batch area without having to go into each file seperately?  Thanks

  • How to connect MBP to MacAir in target

    My cursed 15" 2011 MBP has had a disk fail and won't boot. I tried repairing from a disk but it said to back up my files and reinstall. I have a MacAir but is there a way to connect the MBP to the MacAir in target mode so I can run a back up? I know

  • Tracking of points

    Hello everyone, is there any "standard" algorithm for tracking a lower number of points (i.e. ~ 5 ) in a sequence of frames? At the current point, I'm able to analyse a video stream and search for the center points of circles. Now i have to determine

  • Login failed for user 'xyz'. This session has been assigned a tracing ID of 'c2d....'. Provide this tracing ID to customer support when you need assistance.

    Hello, This error show up only when my application is running under Windows Azure. Everything work perfect on Windows Server 2008/IIS 7.5 with MS SQL server 2012. What i try to do, is to change the database of the connection string at run-time. My co

  • Calendar size in iphoto 06

    Hi. In iphoto 08 the calendar size is now 10x13 or something like that, at least bigger than the rather small size they used to be. However, I am using iphoto 06 and was wondering, if I order a calendar today, will I get still the old and smaller siz