Boot up Tiger from Lastest Mac Pro shipped from Apple

Ok, I am testing to upgraded our Tiger to leopard for the Marketing department. my problem is, the lastest or current mac pro that from Apple is not booting up from Tiger so I can install it on a 250gig hard drive brand new. I hold down the "C" and nothing comes up to prompt me to install. Mac Pro comes with 6gig and 650gig hard drive leopard, but I need to downgrade the OS to Tiger to test it.
Any suggestion what I did wrong or you can downgrade OS on this new model from Apple?

You can't boot the new mac with Tiger.

Similar Messages

AMD Crossfire, Boot Camp, and the new Mac Pro Issue

Hello, all.
I have a new Mac Pro (Late 2013) with 6 cores, 32 GB RAM, and dual D700 AMD graphics cards. I'm using an older 30 inch Apple Cinema Display (with the dual link DVI adapter). I've successfully installed Windows 8.1 under Boot Camp. Here's my problem...
I understand that for the new Mac Pro under Boot Camp enables AMD CrossfireX by default from multiple sources online. However, it's disabled on mine, and every time I try to enable it (and hit "Apply" in the AMD Control Center), it disables again.
Is Crossfire only available for use with a Thunderbolt Display attached? Could that be the problem? Or is the AMD Control Panel lying to me?
Now, games in Windows are still running well... But I'd like to take full advantage of the dual graphics cards in the new Mac Pro with Crossfire. Any help is greatly appreciated, thanks!

Fixed it!
So, not only would Crossfire not enable under Windows 8.1 on my Mac Pro in Boot Camp... But Windows started crashing massively. I was about to wipe Boot Camp entirely and try a clean install (even though the only three things I'd installed were Windows itself using Apple's exact instructions, Steam, and Skyrim), but decided in a last ditch effort to try disconnecting and reconnecting peripherals.
Turns out the culprit was my Belkin Thunderbolt Express Dock.
Disconnecting the Belkin Thunderbolt dock not only stopped Windows from crashing, but now I can enable Crossfire, as well!
Now, this is especially strange since I have read elsewhere that people have no problems using the Belkin dock under Boot Camp with other Macs... This issue is probably isolated to using it in Boot Camp with the new Mac Pro. But disconnecting the dock from my Mac Pro has solved not just one but all of my Boot Camp issues. (Of course, using the Belkin dock under OSX on my Mac Pro is no problem.)
Long story short, if you have a new Mac Pro and plan on using Windows 8.1 under Boot Camp, don't have the Belkin Thunderbolt Express Dock attached.
I'm going to contact Belkin and tell them what I've discovered.
Hope that helps y'all.

Are the Nehalem Mac Pros shipping?

Hi.
Are the new Nehalem Mac Pros shipping? I don't see any signs, reviews.
Did anybody get theirs?
W.W.
(I don't know if this is the right place to ask this question?)

Hi W.W.;
http://www.barefeats.com/nehal04.html
http://www.barefeats.com/nehal03.html
http://www.barefeats.com/nehal02.html
http://www.barefeats.com/nehal01.html
Allan

How do i connect a Mac Pro desktop to apple tv

How do i connect a Mac Pro desktop to apple tv

Plug the ATV into the TV. Switch to the appropriate input on the TV to view content from the ATV.

Trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
I quote
How to update software on your Apple TV (2nd and 3rd generation)
Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
Update your software
Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
Click Download and Install to start the download process.
Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

Does the new mac pro support the Apple cinema display

Does the new mac pro support the Apple cinema display

There is no 2007 23" Cinema Display
There is a 2002 23" display that has the Apple ADC connector
http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg
There is also the 2004 23" display with a DVI connector.
For the latter you just need a mini display port to DVI connector that plugs into the Thunderbolt port
For the former you need that connector plu an DVI to ADC connector
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=sr_sp-atf_ title_1_1/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-1&keywords=dvi+to+adc+ display+adapter
http://www.amazon.com/Dr-Bott-DVIator-US-110V/dp/B000NSGIQO/ref=sr_sp-btf_title_ 1_6/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-6&keywords=dvi+to+adc+displa y+adapter
http://www.amazon.com/Dvi-Adc-Conversion-Box-instock/dp/B0002CZJ7A/ref=sr_sp-atf _title_1_4/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-4&keywords=dvi+to+adc +display+adapter

Installing OS and Apps on SSD boot drive on early 2008 Mac Pro while keeping all other data from old iMac on hdd

So I've just got myself a early 2008 Mac Pro with a OCZ RevoDrive 80GB PCIe SSD to replace my old iMac which is slowly but surely giving up on me. I want to put my OS (mavericks) and some/all (whichever is possible/easier) apps, both apple and 3rd party, from my old iMac, onto the SSD but keep all my other data on the 2TB HDD, also from my old iMac, in the mac pro. Can anyone tell me how to do this/if its possible? (not massively tech savvy so simpleish language and steps would be handy!) Thanks!

How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Starting up problems from an old boot drive in a new mac pro

Just purchased a refurb mac pro last weekend through the apple store. I took my old drive my my first mac pro and was trying to usee it for the boot drive, That machine did not come with snow leopard. I did upgrade it to 10.6.6. When I start up from that drive in the new mac pro it was either starting up real slowly or starting up and would not give me a cursor or. On some occasion I would get a translucent blue huge on the screen. Or I could get a clear screen but nothing would happen if I clicked to open anything. I called support and we reinstalled the on the old drive. I seemed stable and was booting properly from the old drive. Then I upgraded to 10.6.6 again. We used the software the new machine came with for this process. I maybe used the new boot drive for maybe 50 seconds. Apple support wishes for me to go through the process of isolating elements. I've been running the new drive since yesterday. Everything is working well. Except after letting it run for a period of time yesterday got s grey screen after it went to sleep. We'll see what happens with that today. I do not know if it's coincidence or not but the old system went hicky after I started up Paralllels desktop.I'm using Parallelsto run Playon. I'm wondering if Parallels or the xp emulation machine I'm running with it is still trying to read the old macpro ? It did work however. I'm just curious that it's altering something in the Mac osx ? Another thing should I subtract other wirleeless choice devices on the old drive's system ? The old macpro had wireless but the module was installed aftermarket by a mac store.
Thanks

Hard to follow your steps and thoughts. Maybe re-read and cut it into actual steps.
Always clone a system so you have a bootable backup image.
Make sure your software and drivers are compatible.
2010s boot into 64-bit kernel mode by default.
Apple still sells 2009s also on Specials page.
Your old Mac Pro wouldn't come with 10.6 unless it came out in Sept 2009 or later.
Is Parallels current? Is it attached to Windows partition or VM only? does it care that it is running on new hardware? that usually is a non-starter.
New Mac is also a good time to do thorough spring house cleaning. Clean install all the applications and drivers.
Pull your old drive out. The only use for it would be to run Setup Assistant to import your home account prefs.
The "new" refurbished hard drive is still in same state it was in when you got it?
Sleep issue. you may have external devices or 3rd party drivers or bad cable somewhere.
Wireless?
At this point I doubt I can read between the lines.
+Break it into compartments and subjects instead of hash stew for us!+

Migrating from a Mini w/ Tiger to a Mac Pro w/ Leopard

Tomorrow FedEx should be delivering a Mac Pro that I got a sweet deal on via the Apple Refurbished Macs store online. I want to migrate the apps I have installed on a Mac Mini onto the Mac Pro so that I don't have to reinstall them, and I wouldn't mind having all my preferences and settings show up on the new Pro as well.
I went by the Apple store in Green Hills and they gave me a primer on using the Migration Assistant to get stuff from one machine to the other. I have a question from my notes:
I've written down that "the Pro will ask if I want to migrate from another computer - select the Mini" (which I'll have connected via Firewired).
Then it is going to ask something like "Files" or "Home Folder" -- and I neglected to note which is the proper choice.
Anybody familiar enough with this routine to be able to tell me which choice I'm supposed to make at that juncture?
Thanks,
--PS

Is your Mini an Intel or PPC model? If the latter I'd recommend against using Migration Assistant. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (pre 4.0 does not work, 4.1 required for Leopard), TechTool Pro (pre-4.5.1 versions do not work, 4.6.1 required for Leopard), SuperDuper (newest release), and Drive Genius work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
If you plan to migrate an entire user account, then you cannot be logged into a user account with the same name. You should create your first admin account using a different name from the one you will migrate. You can log into your old account after migration and delete the other account.

Trouble installing OS X 10.4 Tiger on new Mac Pro

I just got my new Mac Pro, of course it has Leopard installed. However, I have programs that are not yet updated from 10.4. I have a family license CD with Tiger, and I tried to install it into another partition or another hard drive in this computer, but I get a screen that says it cannot be installed in my computer. I don't understand. Any advice?
Message was edited by: tom in mpls

Operating systems are hardware specific. You can't install a 64-bit windows if the hardware and cpu doesn't support it, you cannot or should not install or upgrade 64-bit over 32-bit.
XP has to be installed ahead of Vista if you want both, not the other way around.
Some versions of Vista support only one physical cpu, or limit you to how much memory can be addressed and limited also by BIOS and memory controllers.
I wish Apple had a retail Intel version of Tiger but they don't, and the last DVD was 10.4.6 which predates the earliest OS that the Mac Pro can boot from and use. So double whammy there. And that is if you have the latest and not some 10.4.3 or original.
Given some of the installer glitches with 10.5.0 I hope we see 5.3/5.6 AND a 10.5.9 DVD down the road.

Mac pro shipped with OS 10.73 able to run snow leopard

I'm trying to salvage my old power PC applications and am hoping I will be able to run them if I load Snow Leopard. My mac pro is a 2 x 2.4 GHZ quad core xeon mac with 10.7.3 shipped loaded. Is there a way to run OSX 10,5.8?. will booting in 32 bit mode help with the old apps?

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.           Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
          After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.           You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.           In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.           Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

Mac Pro 2006 won't boot after attempted cpu swap, Mac Pro 2006 won't boot after attempted cpu swap

I just picked up a used Mac Pro 1,1 (2006). It has 2x2.0 GHz dual-core processors and 5GB of RAM with the 7300GT card.
In this configuration, the machine was running perfectly. I, of course, wanted to upgrade....
I ordered a pair of 5160 3.0GHz processors cheaply and followed a video tutorial to install them. I used Arctic Cleaner and Arctic Silver 5 for the thermal paste.
Bottom line is: I installed the two new processors and when I fired it up, I could hear the fans, optical drive and hard drives all spinning (normal fan speed - NOT "jet mode", and the HD sounds like it's spinning - NOT like it's booting). NO boot chime and NO display. I popped the cover off and saw the CPU B FAIL light on. I swapped CPUs to test the processor, expecting to see the CPU A FAIL light come on. It did not. It just powered the fans/drives with no result (again, with no boot chime and no display).
To make a long and frustrating story short, I wound up putting one of the original 2.0GHz processors in slot A, leaving B empty (maybe I damaged the socket?) and IT STILL WILL NOT BOOT. I have tried all of my processors - the original 2.0GHz and the new 3.0GHz ones - with the same result. There are NO symtoms or indications - no error LEDs, no beeps - no indication why this machine will not boot.
I have reset the SMC, pulled (and replaced) the coin battery, and left it unplugged for over an hour. I have re-seated everything I can think of.
As of rigt now, I can hear the fans quietly humming with the optical drive making a quiet "click" sound as it seeks for a disk to read, and I can hear the faint chatter of the HD head. The power LED is nice and bright (no flashes or pulses), and there are no red LEDs on inside the case. The memory LEDs flash once during bootup and that's it (it's the RAM the machine came with). Pressing the DIAG LED button tells me the machine has power (green LED), has trickle (yellow LED) and the GPU light flashes green.
Of note, during the swap, I got a tiny bit of thermal paste (non conductive) on the contacts of my 2.0 CPUs - which I cleaned off with alcohol and let dry. The gold contacts all appear to be good on the original processors. I can't really see the tiny little pins in the CPU sockets (my eyes are not as young as they used to be!), but the "look" like they're all there.
I'm going to leave this unplugged overnight, but does anyone have any ideas?? If I managed to somehow destroy ALL of the CPUs, wouldn't I get a warning LED or beep or something? Ideas are welcome, as I cannot afford to replace this machine - it has to get me the rest of the way through college.
thanks
Richard

Hello Grant
>
Hardware sets the fans to maximum, and only properly-operating software resets them to "normal levels. If you have fans at normal levels, some software is running.
>
That's what I was thinking, but I'm not even getting the startup chime, and the HD sounds like it's powered on but not doing anything.
EDITED TO ASK: what software could be running at this point? Nothing has loaded from the HD, that much I know...
>Do you still have CPU A or CPU B failure lights?
No. I have just one original processor installed in the CPU A socket. No lights of any kind. (Even if I install an original processor in CPU B, I still occasionall will get a CPU B FAIL light, so I'm thinking I damaged the socket somehow...the light will not be consistent, but it's always the CPU B FAIL light - the light only turns on some of the time (and stays on once lit) - so that's why I pulled the B processor and am simply trying to boot with A alone)
>Do you have a flashing power on light, indicating failed or no memory?
Again, no. I can "make" the light flash by removing the memory riser, but when I re-install the riser, the light stops blinking (with power off during removal/install, of course!)
>Have you done the more severe SMC reset with the reset button OR:
unplug AC power.
Yes. I have used the SMC reset button 3 or 4 times. I unplugged the machine and left it (with coin battery installed) for an hour. The last thing I did last night was that I left it unplugged overnight (with coin battery removed). I have yet to attempt a power on this morning. I will do so and report back.
>
unplug AC power.
Press and hold power-on for a quarter minute to drain the power capacitors.
Re-plug AC power.
wait a quarter minute.
then power on.
>
Haven't done that one yet. (Didnt know about it!). Will try that second today, after attempting the initial boot up after leaving it unplugged all night. (fingers crossed) Of course, the capacitors are likely discharged now after being unplugged and battery-less all night, but you never know...
>Many things have to get synchronized after a CPU swap. It may take a half-dozen reset attempts before everything lines up again and goes.
Thanks for the hope. I will keep trying.
>
I recommmend you remove ALL distractions: all drives, all graphics cards, all PCI cards, all USB devices -- until you get the chime nothing else matters.
Already have done so. Last night I was down to 1 original CPU (CPU A), one memory riser with 1 set of original 1GB DIMMS, 1 bootable HD and nothing else (not even a keyboard/mouse - literally NOTHING else). Will keep trying in this configuration. All I really wanted last night was to hear the "bong" at power on!
Will do a bit more troubleshooting today and will report back.
Thank you!
Richard
Message was edited by: Richard Williams Jr

How to install OS X Tiger on new Mac Pro

Does anyone why you can´t install OS X Tiger on the new Mac Pro? I bought it recently and it came with Leopard of course but I really need to run Tiger because of many of my plug-ins for Protools costs a fourtune to upgrade...
Is it possible to do it? Workaround anybody..?

Is the hardware in the mac pro all that different than to the one shipped with Tiger???
I don't know all the differences, but iirc, the Graphics card is a big diff.
I have Tiger discs for a mac mini shipped just before 2008, would that work you think?
Can only guess, but no, I don't think it would, all Tiger disks for IntelMacs are Machine specific.
Sorry, can't help with the links, I've just read about attempts & the difficulties.

Mac Pro, ATI X1900, Apple Cinema, and Boot Camp

Ok so I finally got Windows to install on to my Mac Pro. This is a long explanation because it includes a lot of information for users who may be having the same problems I had. My problem is at the bottom, but for those of you who are still stuck on the blank screen, READ ON!
Many have users been having problems installing Windows on Mac Pros with the ATI x1900 video card.
For Example, after running boot camp and loading XP the screen would go blank.
To get around this use the DVI to VGA addapter and plug a seperate monitor in, once the computer has finshed installing Windows, then install the drivers.
At this point my graphics card was still not installed correctly. I downloaded the driver off of the ATI website, however I kept recieving errors. So I unpakaged the driver and had the computer find a driver in that folder. Once this was done I went back and installed the remaining software without errors!
Now, currently I am still having to use a second monitor because my HD 23 inch was just showing a blank screen. To fix this I,
1. Installed the video card controller from the ATI website for the ATI X1900
2. Opened advanced settings and supported HD 1080i
3. Connected my HD monitor in the second DVI slot
4.exteneded onto that monitor
5. Switched that monitor to primary
And Perfect! It works
However, this is where problems began to arise. After customizing everything to my taste, I ran a test within this same program which sets all of your graphics card's settings to the optimal setting. I walked away because it was taking a long time, and when i came back my screen was totally messed up. It looked as if the settings had been changed and it had been moved up. With the top of the windows screen down where the dock is supposed to be, and then the dock right above that. I cannot correct this and it is extremely frustrating!
Is there anyway for me to correct this? It is normal in Mac Mode, but in XP i can't correct it. It just seems like there is one problem after another!

so did you install the bootcamp drivers?
because i had no luck with ati's drivers from their web site but apples drivers worked fine.

Option to boot into leopard has disappeared mac pro/boot camp

I have a mac pro. running the latest version of leopard. quad core xeon 2.66 w.4 GB of RAM. Runs like a dream. Sadly, however, I absolutely had to run a windows program natively. So I dutifully went out and bought a copy of vista, installed it via boot camp, and went merrily on my way. Booting in and/or out of either OS, as warranted, was perfectly smooth. Then I had a few weeks away from work, and when I returned, it was as if leopard had vanished. Starting up I found myself in windows. Odd, as I had the defaults set to open in MacOS. So I restart, holding down the option key. No MacOS. Only windows. Then I see that Vista is yelling at me cuz I have yet to "activate" it and I now apparently have a fake OS. So I activate the *****, all goes well, my fake copy is now miraculouslt genuine again. So I restart again, holding down the option key, and no change from before. So I do it again only this time I zap the PRAM first, and THEN hit option, and same thing, windows only. So I go into windows looking for the Boot Camp Assistant control panel thingie, guess what, it aint there. So I go to startup and recovery options in Windows (control panel, system, advanced) and attempt to reset the default to Mac, only there is no Mac option. OK so now I am perplexed as ****. So I do a system restore in windows, to a restore point just a couple weeks ago when I am, in fact, quite sure that everything worked. and I could boot into and use either OS with ease. Once it restores and restarts, I'm back in windows AGAIN but now it says my OS is a fake (again) and I have to activate it (again) and STILL no sign of Mac OS or boot camp assistant or anything like it anywhere. I dont wanna do anything else cuz now I am seriously afraid I am gonna f* it all up even more. PLEASE PLEASE PLEASE help. I am doomed. Where did my leopard go? What do I do? How do I fix this? THANK YOU IN ADVANCE FOR SAVING MY ABOUT-TO-BE-MEANINGLESS life...

There is a chance you somehow programed your machine to boot to Windows only. To undo this you need a functional Boot Camp Manager. You can repair the Boot Camp Manager using your OSX install DVD - WHILE IN WINDOWS. (Just boot to Vista and shove the DVD in the optical drive - then the re-installation of Boot Camp Drivers and BC Manager can begin).
Before you do that - right-click My Computer then click Explore. Click local disk (C). Next click Program Files and Boot Camp should be about 5 or 6 items down (alphabetically) Click Boot Camp then kbd.mgr (KeyBoard Manager) IF THIS activates Boot Camp Keyboard Manager you'll have no problems choosing an OSX reboot option. NOTE - in my own case, clicking kbd.mgr only prompted the tray icon to appear (which for me is great because I can right-click that icon to access the Boot Camp controls....) but it might work either way.
If it is gone / broken - then find and Click your Set Program Access and Defaults and then Click Change or Remove Programs. You might still have enough of your old Boot Camp Install there left to start a repair (without the DVD). Just locate Boot Camp Services and Click "Change" and repairs will begin.
Anyway - using the Boot Camp Manager you can force a reboot to OSX just by choosing. Good luck.
Message was edited by: NA Smith

Boot up Tiger from Lastest Mac Pro shipped from Apple

Similar Messages

Maybe you are looking for