Bootable partitions won't display on boot selection screen
Hi,
i have four bootable partitions - my regular Mac partition - a boot camp Vista partition - a Time machine partition and a Image partition (created by Carbon Copy from system partition).
Normally in the boot selection screen (pressing alt during startup) i got to see all 4 partitions and could boot from them. At some time this changed and at the moment i only see mac and vista - the Time machine and the image partition are no longer available.
In the mac system panel - start volumes i do see both partitions as it should be. Both volumes are absolutely ok - i have used also the hard disk service utility but there were no errors. Has anybody got a clue why this happens and how it could be changed.
I am not absolutely sure but it could be that both partitions were lost, when i migrated the machine to snow leopard. Maybe this is a clue.
Thanks
Michael
If the Time Machine volume shows in the Startup Disk system preference it must have more than the Time Machine backups on it, all of which should be in a folder named "Backups.backupdb" at the root level of the volume. At the least, it should also have the same System & Library root level folders as does any volume that is capable of booting the Mac or it should not show up in the system preference. Note that these folders alone do not guarantee that the volume actually can boot the Mac.
As for the CCC volume, the same thing applies. If the CCC backup is in the form of an *image file* (.dmg extension) it will not boot a Mac, nor should that volume show up in the preference unless it also has the other root level folders mentioned above.
It would help if you explained exactly what you mean when you describe the CCC volume as an "Image partition" -- it is either a clone that should look in Finder exactly like the source it was made from with the same folder structures or a single file that has to be mounted as a virtual volume by double-clicking on it to reveal that structure.
Also let us know what the root level folder structure is on the Time Machine volume; IOW, if has anything besides a "Backups.backupdb" folder & if so, how the other items got there.
Similar Messages
-
Holding option on boot does not bring up boot selection screen
Holding option on boot does not bring up the boot selection screen, the machine just boots from the previously selected startup drive.
MBP 17 mid-2010.
SL 10.6.7
I created a three partition drive on a Seagate GoFlex 1.5 TB drive. GUID partition table.
Used SuperDuper to clone the drive. Drive is bootable. Booting from drive works using Startup Drive selector, so does not appear to be a drive issue.
I'm baffled. What can I do to fix/troubleshoot?
PeterAre you using a Bluetooth keyboard by any chance, I see that same behaviour at times if so ?
I tend to select the desired boot volume with System Preferences/Startup Disc these days although option should work ...
I have noticed that if you reboot right away the option key often works the second time round which is odd. -
Automatically show boot select screen at startup
Is there a way to force OSX to start with the boot selection screen at startup? I'd like to be able to power on my system and have it show me the boot select screen (i.e. Windows/OSX) so that I can choose which OS I wish to boot into. I currently have to hold down the Option key at startup in order to bring this screen up or do the same after a restart to change OSes. Is it possible to do? Would save having to babysit the Windows OS whenever it decides to update the OS with a restart and would allow me to quickly switch OSes merely by doing a restart from either OS.
My setup is two physical hard drives, one for OSX (Snow Leopard 10.6.8) and one for Windows (Windows 7 Pro 64-bit).rEFIt will basically do the same as holding the option key,I believe it's defaulted(?) to give the boot screen when you cold start showing any available boot drives, but it won't help with Windows auto restart after updating. There may be an option to do so as there's a lot more to rEFIt then I use so you may be able to have it show up at restarts also.
Sorry I can't help more.... -
Mac pro (2013) fails to see usb 3.0 connected drives in boot selection screen
Hi,
I am using the late MacPro and have three drives attached via an USB 3.0 hub (Anker Uspeed USB 3.0 7 Port Hub).
The hub has a VIA VL812 chipset with the latest firmware update (9081) - I have verified this.
My problem is, when I enter the boot device selection screen (by pressing the alt-key during startup) none of the drives is recognized.
When I plug any drive directly into one of the four USB 3.0 ports of the MacPro, thereby bypassing the hub, it becomes visible and I can use it to boot.
AFTER the boot process, when OS X has finished loading, everything works fine. I have used two of the drives to backup several GBs of data from my main drives (connected via Thunderbolt) with no issues.
Is anybody able to connect drives through a USB 3.0 hub and use them in the boot selection screen? Which USB hub do you have?
Thanks
MartinGot the latest firmware?
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0) -
0ORGUNIT short text displayed in variable selection screen
Hello experts,
I use the 0ORGUNIT as variable in the selection screen, when i use the selection button, the 0ORGUNIT is displayed as a hierarchy but the text are in short text.
In the query, the text are well displayed in Medium-Lenght text.
Where can i defined the parameter to obtain the same lenght for the selection screen?
Thanks,
Regards.Hello GALVAGNI,
Go to the administrator of your InfoProvider and go to the dimension of your InfoObject 0ORGUNIT, right-click over 0ORGUNIT there and select "Provider-Specific Properties" then change the option Display to "5 Medium-Length Text".
Assign points if helpfull.
Diogo. -
How to display image in selection-screen of a report
Dear all ,
i want to show my image from url or from desktop to the report selection-screen . i have searched sdn and found some code . after applying it i am not able to display image in the selection-screen although it is displaying the box in which the image should appear . here i am sending my code plz verify where is the mistake .
REPORT ZPIC2.
DATA: docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
PARAMETERS: A(4) DEFAULT '4' .
PARAMETERS: B(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
**& Form show_pic
FORM show_pic.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 100
left = 150
top = 58
width = 350.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'C:\abc.jpg' .
endif .
IF sy-subrc NE 0.
ENDIF.
ENDFORM.
CORECT ANSWERS WILL BE HIGHLY APPRECIATED AND SURELY REWARED .
THANKS ,
AMIT RANJANHi,
Try this code. hope it will work.
DATA: DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
PICTURE_CONTROL_1 TYPE REF TO CL_GUI_PICTURE,
URL(256) TYPE C,
PIC_DATA TYPE TABLE OF W3MIME WITH HEADER LINE,
PIC_SIZE TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: A(4) DEFAULT '4' .
PARAMETERS: B(4) DEFAULT '5' .
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
PERFORM SHOW_PIC.
*& Form SHOW_PIC
FORM SHOW_PIC .
CREATE OBJECT PICTURE_CONTROL_1
EXPORTING PARENT = DOCKING.
CHECK SY-SUBRC = 0.
CALL METHOD PICTURE_CONTROL_1->SET_3D_BORDER
EXPORTING
BORDER = 5.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
CALL METHOD PICTURE_CONTROL_1->SET_POSITION
EXPORTING
HEIGHT = 200
LEFT = 100
TOP = 20
WIDTH = 400.
CHANGE POSITION AND SIZE ABOVE**************************
IF URL IS INITIAL.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
TYPE = 'image'
SUBTYPE = CNDP_SAP_TAB_UNKNOWN
SIZE = PIC_SIZE
LIFETIME = CNDP_LIFETIME_TRANSACTION
TABLES
DATA = PIC_DATA
CHANGING
URL = URL
EXCEPTIONS
OTHERS = 1.
ENDIF.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL
EXPORTING
URL = 'file://D:\img.jpg'.
ENDFORM. " SHOW_PIC -
Displaying Data Using Selection-screen in Module Pool
Hi All,
Currently I'm working on a module pool program.In that i'm having two screens 9000 and 9001.
I want to select a bookrefno using a selection screen and display header & table control data in 9001 screen when the bookrefno is validated.
can anyone help me sending sample code regarding this
Regards
Ravi SHi Ravi
Place "bookrefno." field on screen 9000.
Use validations on that particular field by using chain-endchain.
in PAI of 9000
case sy-ucomm
when 'display'
call screen 9001
write select statment to display data i.e header & table control in 9001 .
hope this would solve your problem.
reward points, if its helpful.
Thanks
RK Nimma -
TO display pop_up on selection screen And chosse that field in 'SELECT' sta
Hello,
I want a pop up on selection screen when user clicks the push button on selection screen pop up should come on selection screen and display the all field of YTLEA table. when user checks few or all field from pop up then data for that field is selected from the YTLEA table.DDIF_TABL_GET
-
Initially net value display zeros on selection screen
hi friends,
I created one modulepool program in that on the selection screen NTGEW(net wt)
field initially displays zero like 0.000, but the user wants it to be blank with out zeros. please sujjest me.
thank u,
with regards,
prasad.Hi,
For the NTGEW field make sure to populate the corresponding reference field also...
Let's say an example..
If your field name is MARA-NTGEW and the reference field is MARA-MEINS.
Make sure to have the field MARA-MEINS populated with the UOM value.
Thanks
Naren -
Want to display space in selection screen
hi,
I want to display some space between one select-option and ane checkbox.
my coding is like
SELECT-OPTIONS:
s_vstel FOR vekp-vstel.
PARAMETERS:
p_dimen AS CHECKBOX DEFAULT ' '.
any pointer.Hi,
Use the
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01.
Selection-Screen : Begin of Line.
SELECT-OPTIONS:
s_vstel FOR vekp-vstel.
SELECTION-SCREEN: Skip.
PARAMETERS:
p_dimen AS CHECKBOX DEFAULT ' '.
Selection-Screen : End of Line.
SELECTION-SCREEN END OF BLOCK b1.
Edited by: avinash kodarapu on Nov 20, 2008 3:17 PM -
How to Display Varient on selection screen?
Hi All,
the requirement is i need to display the varient on selection screen as Paramente.
Display Varient /STANDARD as a paramente on selection screen.
Please let me know how to do it.
Regards,
Kumar
Moderator message: very basic, please search for available information before asking.
locked by: Thomas Zloch on Aug 12, 2010 12:27 PMHi All,
the requirement is i need to display the varient on selection screen as Paramente.
Display Varient /STANDARD as a paramente on selection screen.
Please let me know how to do it.
Regards,
Kumar
Moderator message: very basic, please search for available information before asking.
locked by: Thomas Zloch on Aug 12, 2010 12:27 PM -
How to display icons on selection screen ,without using classes.
Hi Experts,
How can we display icons on the selection-screen ..?
one of the methods i heard frm my frnds was to use ->cl_gui_picture_viewer
but as a begginer i am not tht comfortable with classes .So is there a way around to display icons on my selection screen without using classes .
Thanx in Advance,
Regards ,
Rajesh .Hi,
here a short example:
REPORT Z_TEST2.
TABLES: SSCRFIELDS. "Felder auf Selektionsbildern
INCLUDE .
SELECTION-SCREEN: BEGIN OF BLOCK A01 WITH FRAME TITLE MELDUNG1.
SELECTION-SCREEN: SKIP 2.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 10(04) T_ICON.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: SKIP.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 01(34) T_AUFSD.
PARAMETERS: P_AUFSD AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 01(34) T_AUFCO.
PARAMETERS: P_AUFCO AS CHECKBOX DEFAULT ' '.
SELECTION-SCREEN: PUSHBUTTON 45(04) PB01 USER-COMMAND SALL.
SELECTION-SCREEN: PUSHBUTTON 50(04) PB02 USER-COMMAND DALL.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 01(34) T_AUFCS.
PARAMETERS: P_AUFCS AS CHECKBOX DEFAULT ' '.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 01(34) T_AUFPP.
PARAMETERS: P_AUFPP AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN: PUSHBUTTON 45(15) PB03 USER-COMMAND INIT.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: SKIP 2.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON 45(15) PB04 USER-COMMAND ONLI.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: SKIP 2.
SELECTION-SCREEN: END OF BLOCK A01.
AT SELECTION-SCREEN.
IF SSCRFIELDS-UCOMM = 'SALL'. "alle selektieren
P_AUFSD = 'X'.
P_AUFCO = 'X'.
P_AUFCS = 'X'.
P_AUFPP = 'X'.
ENDIF.
IF SSCRFIELDS-UCOMM = 'DALL'. "alle deselektieren
P_AUFSD = ' '.
P_AUFCO = ' '.
P_AUFCS = ' '.
P_AUFPP = ' '.
ENDIF.
IF SSCRFIELDS-UCOMM = 'INIT'. "initialisiern
P_AUFSD = 'X'.
P_AUFCO = ' '.
P_AUFCS = ' '.
P_AUFPP = 'X'.
ENDIF.
INITIALIZATION.
MELDUNG1 = 'Datenbankselektion'.
T_ICON = ICON_PRINT.
T_AUFSD = 'Kundenauftrag'.
T_AUFCO = 'Innenauftrag'.
T_AUFCS = 'Serviceauftrag'.
T_AUFPP = 'Fertingungsauftrag'.
PB01 = ICON_SELECT_ALL.
PB02 = ICON_DESELECT_ALL.
CONCATENATE ICON_REFRESH 'Initial' INTO PB03.
CONCATENATE ICON_EXECUTE_OBJECT 'Ausführen' INTO PB04.
START-OF-SELECTION.
write: / 'Test'.
END-OF-SELECTION.
Regards, Dieter -
Display list on selection-screen
Hello everyone,
I've got a question concerning selection screen. I want to know, if there is a way to display list/table on selection screen after user input. Specifically, when user enters for example 30 invoice numbers into select-options, I need those 30 numbers displayed on the same selection screen.
Thanks in advanceinstead u can print selection screen....along with output.....
for this....
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = p_repid
TABLES
selection_table = it_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc EQ 0.
WRITE:1 'Selection Criteria'(i19),
/1 sy-uline(18),
/1 'Variant Name'(i21),
23 sy-slset.
*-- This function module lists the Selection Screen contents
CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
EXPORTING
report = p_repid
seltext = 'X'
newpage = space
TABLES
sel_tab = it_int_tab
EXCEPTIONS
sel_tab_empty = 1
OTHERS = 2. -
Hide display attributes in selection screen?
Hi @ All,
Does anybody knows how I can hide some display attributes of one characteristic in the selection screen in the portal?
For example, I have the characteristic 0plant with the display attribute 0ALTITUDE which I want to hide in the selection screen.
Any ideas?
Thanks!
StephanHi Abhijit,
yes we talking about BW report selection screen
0plant is my input variable in query designer. 0plant is also navigational in the infocube.
0ALTITUDE is an attribute of 0plant. It is not navigational and not input variable in query designer.
Any ideas how I only set some attributes of 0plant visible for the selection screen, and some not?
Thanks,
Stephan -
Can anyone advise on how to make the picture you select display on the main screen (Loupe view)?
Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Maybe you are looking for
-
Can I Open Indesign File In CorelDraw Without Losing The Applied Effects?
i have been using Indesign for quite some time now and i have considerable experience in Corel too. My problem is that if i export an indesign file as PDF and then open it in CorelDraw, the file loses the effects i applied. For example i apply blur e
-
Reservation should be created only within the mentioned cost center range.
Dear All, For IW31 t-code System should allow to create the Reservation of Insurance spares for the plant say "X" with cost center say 1 to 10. Means system should not allow to create the reservation other than these cost centers. is ter any standard
-
post updating and Ilife install some of my apps isn't working so well for example a flash application named "yousendit" doesn't open just show like it is open but nothing happens and adobe premiere CS5 stops accepting psd files and some other problem
-
Photos have disappeared from iphoto library
Hi, I am using iPhoto version 6.0.6 and I can't get some of the old photos to show up in the library. I had a lot of pictures, had to switch computers, and during the transfer, the old photos no longer show up in the library. I was using an older ver
-
How to set the home page in FF14.0 for Android?
Just installed FF14.0 for Android. Previous versions allowed users to set their own home page - how is this done in this version?