Bootcamp 2.1 with WIndows XP SP3 can't turn keyboard light off

Hi I've installed bootcamp 2.1 on my macbook pro 13 (june 2009 model) and the operation went smoothly.
After I install bootcamp drivers everything work like a dream eject button, screen brightness control apart from the keyboard light which I can't turn if off, the light set to the lowest and everything I boot into windows the light goes back to the maximum
Anyone know how to control/disable the keyboard light
I've tried macbook tray tools but doesnt work (freeze after lanuch)
Thank you

I found a quick fix solution.
if I kill the process kbdmgr.exe then the keyboard light will go off and leave the display brightness the same as your setting which is fine for me.
but the volumn controls and eject button will not work I will have to do it from the windows interface rather than the keyboard

Similar Messages

Pc with windows xl/sp3 can't connect / acquire ip address from airport extreme; meanwhile, my macbook in connecting fine. We have a wpa2 personal password

My husband's Dell with Windows xl (sp3) can't get an ip address from our new airport extreme. Nor can my daughter's Windows 7 computer. There are no firewalls in place. Both computers worked with my old Airport, though it was sssslllllllowwww. My Macbook works fine and is super fast compared to the old airport. We are using a wpa2 personal password.
Anyone out there have a cure for this problem so we can hook up those sad pcs?
Thanks a lot.
Elizabeth

First, make sure that the new Airport is configured exactly the same as the old one. Hopefully you saved the configuration settings in a file and can look at them to be sure.
If the Windows PC's can't connect with the same password, it's possible that the PC's were using an older wifi protocol like 802.11a or b. The new Airport is backwards compatible but has to be setup that way check to see what versions of 802.11a the windows computers support and make sure that the wireless mode of the airport is setup to accomodate them.
Can the PC's get an IP address if they are connected to the AirPort using an ethernet cable? If they can, that would help naorrow things down to a wireless issue and not some other configuration problem.

Which bootcamp version works with windows xp and can I download it?

which version of bootcamp do I use for windows XP, and where can Idownload it, all I can find is updaters.
I am using lion, which assmes windows 7, but I have windows XP

Lion does not support Windows XP. You must use Windows 7.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

With Boot Camp, you must install Windows onto in internal HDD (or SSD). If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not. I have heard varying levels of success with that. I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

Windows XP SP3 can't authenticate in 802.1x

Hi all,
I'm trying to get working a fresh install with 802.1x in it. I have a serious issue with Windows XP SP3 not authenticating at all... I can see (with a Wireshark) EAPoL Start messages going out from the host, but nothing happens after. The switch is pretending that it has a timeout on dot1x exchanges. We don't have any issue with Windows 7 at all !!!!
I'm giving you details about the setup :
Switches : Cisco switching architecture (IOS IP Services K9 12.2(55)SE)
Authentication Server : Cisco Secure ACS 4.2
Directories : Microsoft Active Directory and OpenLDAP for the directories
PKI : External (opensource)
Clients : Windows XP SP3 and a very few Windows 7
EAP Method for the moment : PEAP MSCHAPv2
Concerning switches, typical config is the following (only necessary things appear) :
swi-test-802.1x#sh run
Building configuration...
Current configuration : 6481 bytes
aaa new-model
aaa group server radius ACS
server X.X.X.X auth-port 1645 acct-port 1646
deadtime 60
aaa authentication login ACS_RADIUS group ACS local
aaa authentication dot1x default group ACS local
aaa authorization exec ACS_RADIUS group ACS local
aaa authorization network default group ACS
aaa accounting dot1x default start-stop group ACS
aaa accounting exec ACS_RADIUS start-stop group ACS
aaa accounting network ACS_RADIUS start-stop group ACS
aaa session-id common
ip device tracking
dot1x system-auth-control
interface FastEthernet0/X
description Typical FlexAuth port 802.1x
switchport mode access
switchport voice vlan 160
ip access-group Acl_Default_Acl in
authentication event fail action next-method
authentication event server dead action authorize vlan 99
authentication event no-response action authorize vlan 99
authentication host-mode multi-domain
authentication order mab dot1x
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
ip access-list extended Acl_Default_Acl
permit ip any any
radius-server host X.X.X.X auth-port 1645 acct-port 1646 key XXX
radius-server vsa send accounting
radius-server vsa send authentication
end
If I'm using Windows 7, no problem...
I've tried to modify different registry keys concerning authMode, SupplicantMode (twice applicable but only right until XP SP2), BlockTime for reauth, following everytime Microsoft recommandations and the different published kb...
I've tried with GPO for a global change or modifying XML template of the interface, but nothing changes...
I'm giving you the debugs (radius authentication and dot1x events) :
swi-test-802.1x#
swi-test-802.1x#
*Mar 1 01:19:25.727: dot1x-ev(Fa0/1): Interface state changed to UP
*Mar 1 01:19:25.735: dot1x-ev:DOT1X Supplicant not enabled on FastEthernet0/1
*Mar 1 01:19:26.230: dot1x-ev(Fa0/1): Interface state changed to DOWN
*Mar 1 01:19:26.230: dot1x-ev:dot1x_supp_port_down: No DOT1X subblock found on FastEthernet0/1
*Mar 1 01:19:28.327: dot1x-ev(Fa0/1): Interface state changed to UP
*Mar 1 01:19:28.336: dot1x-ev:DOT1X Supplicant not enabled on FastEthernet0/1
*Mar 1 01:19:28.697: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
*Mar 1 01:19:29.510: %AUTHMGR-5-START: Starting 'mab' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.510: RADIUS/ENCODE(0000000B):Orig. component type = DOT1X
*Mar 1 01:19:29.510: RADIUS(0000000B): Config NAS IP: 0.0.0.0
*Mar 1 01:19:29.510: RADIUS/ENCODE(0000000B): acct_session_id: 11
*Mar 1 01:19:29.510: RADIUS(0000000B): sending
*Mar 1 01:19:29.510: RADIUS/ENCODE: Best Local IP-Address 10.248.2.21 for Radius-Server 10.248.64.20
*Mar 1 01:19:29.510: RADIUS(0000000B): Send Access-Request to 10.248.64.20:1645 id 1645/19, len 206
*Mar 1 01:19:29.510: RADIUS: authenticator 3C AE B6 01 13 26 4E 77 - 94 33 B1 40 B7 A6 06 F8
*Mar 1 01:19:29.510: RADIUS: User-Name           [1]   14 "60eb699a0e0f"
*Mar 1 01:19:29.510: RADIUS: User-Password       [2]   18 *
*Mar 1 01:19:29.510: RADIUS: Service-Type        [6]   6   Call Check                [10]
*Mar 1 01:19:29.510: RADIUS: Framed-MTU          [12] 6   1500
*Mar 1 01:19:29.510: RADIUS: Called-Station-Id   [30] 19 "00-1A-6D-FE-AA-83"
*Mar 1 01:19:29.510: RADIUS: Calling-Station-Id [31] 19 "60-EB-69-9A-0E-0F"
*Mar 1 01:19:29.510: RADIUS: Message-Authenticato[80] 18
*Mar 1 01:19:29.510: RADIUS:   2F C3 4E 65 14 AF D3 8E B9 E5 29 C3 28 13 C6 B8             [ /Ne)(]
*Mar 1 01:19:29.510: RADIUS: EAP-Key-Name        [102] 2   *
*Mar 1 01:19:29.510: RADIUS: Vendor, Cisco       [26] 49
*Mar 1 01:19:29.510: RADIUS:   Cisco AVpair       [1]   43 "audit-session-id=0AF80215000000030048C250"
*Mar 1 01:19:29.510: RADIUS: NAS-Port-Type       [61] 6   Ethernet                  [15]
*Mar 1 01:19:29.510: RADIUS: NAS-Port            [5]   6   50001
*Mar 1 01:19:29.510: RADIUS: NAS-Port-Id         [87] 17 "FastEthernet0/1"
*Mar 1 01:19:29.510: RADIUS: NAS-IP-Address      [4]   6   10.248.2.21
*Mar 1 01:19:29.519: RADIUS(0000000B): Started 5 sec timeout
*Mar 1 01:19:29.527: RADIUS: Received from id 1645/19 10.248.64.20:1645, Access-Reject, len 50
*Mar 1 01:19:29.527: RADIUS: authenticator B0 3B E5 8F 22 D1 C1 66 - F6 8F 1A 7E 88 49 AA BB
*Mar 1 01:19:29.527: RADIUS: Reply-Message       [18] 12
*Mar 1 01:19:29.527: RADIUS:   52 65 6A 65 63 74 65 64 0A 0D          [ Rejected]
*Mar 1 01:19:29.527: RADIUS: Message-Authenticato[80] 18
*Mar 1 01:19:29.527: RADIUS:   91 5F 64 12 73 8E 76 0C 31 DD 2B B7 2E EC 6E BA          [ _dsv1+.n]
*Mar 1 01:19:29.527: RADIUS(0000000B): Received from id 1645/19
*Mar 1 01:19:29.527: RADIUS/DECODE: Reply-Message fragments, 10, total 10 bytes
*Mar 1 01:19:29.527: %MAB-5-FAIL: Authentication failed for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.527: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'mab' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.527: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.527: dot1x-ev(Fa0/1): Couldn't find the supplicant in the list
*Mar 1 01:19:29.527: dot1x-ev(Fa0/1): Sending create new context event to EAP for 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Created a client entry (0x9E000002)
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Dot1x authentication started for 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:19:29.535: %AUTHMGR-5-START: Starting 'dot1x' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Sending EAPOL packet to 60eb.699a.0e0f
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Role determination not required
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 1 01:19:30.290: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
*Mar 1 01:19:39.828: dot1x-ev(Fa0/1): Sending EAPOL packet to 60eb.699a.0e0f
*Mar 1 01:19:39.828: dot1x-ev(Fa0/1): Role determination not required
*Mar 1 01:19:39.828: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 1 01:19:50.113: dot1x-ev(Fa0/1): Sending EAPOL packet to 60eb.699a.0e0f
*Mar 1 01:19:50.113: dot1x-ev(Fa0/1): Role determination not required
*Mar 1 01:19:50.113: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Received an EAP Timeout
*Mar 1 01:20:00.414: %DOT1X-5-FAIL: Authentication failed for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Sending event (2) to Auth Mgr for 60eb.699a.0e0f
*Mar 1 01:20:00.414: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Received Authz fail for the client 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Deleting client 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:20:00.414: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.414: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.414: %AUTHMGR-5-VLANASSIGN: VLAN 99 assigned to Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.422: dot1x-ev:Delete auth client (0x9E000002) message
*Mar 1 01:20:00.422: dot1x-ev:Auth client ctx destroyed
*Mar 1 01:20:00.422: dot1x-ev:Aborted posting message to authenticator state machine: Invalid client
*Mar 1 01:20:00.733: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (Unknown MAC) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.733: RADIUS/ENCODE(0000000B):Orig. component type = DOT1X
*Mar 1 01:20:00.733: RADIUS(0000000B): Config NAS IP: 0.0.0.0
*Mar 1 01:20:00.733: RADIUS/ENCODE: Best Local IP-Address 10.248.2.21 for Radius-Server 10.248.64.20
*Mar 1 01:20:00.733: RADIUS(0000000B): Started 5 sec timeout
*Mar 1 01:20:00.741: RADIUS: Received from id 1646/9 10.248.64.20:1646, Accounting-response, len 20
swi-test-802.1x#
swi-test-802.1x#
If anyone has an idea. Another thiong to mention, hosts have a Trend OfficeScan solution for Host protection, but the same on Windows 7 and everything is OK.
Thanks for your precious help.
Pierre-Louis

Hi Pierre-Louis,
A couple of questions here:
-We have a voice vlan defined for the port and multi-domain config.During your tests, do you have the PC connected behind an IP Phone?
-Which authentication method do you want to go for PC/IP phone?
-Whats the IP Phone model/vendor ?
In the logs , we have an Access-Reject for the client MAB auth attempt and then failover to dot1x auth.However, I dont see a Phone MAC in the logs.
On the switch debug, we see several EAPOL packets to client 60eb.699a.0e0f, which seems a Quanta computer based on the MAC vendor.
However no EAPOL packets seen from client side.You did indicate seeing an EAPOL Start from the host PC on a sniffer trace.
-Are you sniffing on the client adapter itself or the switchport to which client is connected?
-If we have an IP phone inbetween, do you also see the EAPOL start packet from the client when sniffing on the switchport ?
Windows XP ,SP3 has some changes as compared to earlier SP versions:
http://support.microsoft.com/kb/949984
The following output would help to further isolate on problem.You will need to ensure that we have timesync between sniffer traces and debug logs for correlation.
On switch, save logging output of:
debug radius
debug dot1x all
debug authentication all
debug authentication feature mab_pm all
debug authentication feature mda all
debug authentication feature voice all
Simultaneously you can capture sniffer trace by spanning switch port interface to which Phone/PC is connected.Please don't use any filters during the sniffer capture.
After above steps please do a shut/no shut for tested port interface and replicate the problem with Win XP SP3.
Following the test, you can also obtain the output of "show auth sessions int
HTH,
Alex

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

TS3274 my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Skype 7.6 crashing at startup - netbook with windows xp sp3

i had the same problem since update skype to 7.6 version. please help to fix the problem to me communicate to my family in the philippines. i used netbook with windows xp sp3
Title edited as Separate Topic

Open Windows Event Viewer -> Application. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the description of the error text.

I have a dell computer with windows xp. i can not download itunes it is looking for itunes.msi and because it can not find it, i can not download itunes 10, and i can not delete itunes from my computer. HELP!!!!!!

i have a dell computer with windows xp. i can not download itunes it is looking for itunes.msi and because it can not find it, i can not download itunes 10, and i can not delete itunes from my computer. HELP!!!!!!
What else can I do ?

Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

TS1424 Just got a new computer with Windows 8. Can't get Itunes to download. Checked with clerk at Sam's Club who said that was her experience as well.

Just got a new computer with Windows 8. Can't get Itunes to install. Checked with a clerk at Sam's Club who said it wouldn't install for her either.
What do I need to do. Sent an email to Apple; but just got a computer generated response with no helpful advice.

Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

I have a problem with Incorrect payment Who Can I Turn to off this payment

I have a problem with Incorrect payment Who Can I Turn to off this payment
about receipt No.111032735561

These are the steps I performed on my own system many months ago. I could not view PDF files in Firefox with both Adobe Reader and Foxit installed.
#Close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#If you have not already done so, uninstall Adobe Reader 9.4.5 using Windows Start > Settings > Control Panel > Add or Remove Programs, click on the item, click Remove. You may need to restart your system.
#Open Foxit in your programs list Windows Start > Programs
#*on the Foxit menu, click Tools > Preferences
#*click File Associations and be sure "Display PDF in browser" is checked then click "Make Default PDF Viewer" then click OK
#*close Foxit Reader (File > Exit)
#Start Firefox
#*Open the Applications panel (Tools > Options > Applications '''''OR''''' Firefox button > Options > Options > Applications)
#*type '''pdf''' in the search box; you should see "Foxit Reader PDF document"
#*in Action column, click the down arrow at the far right end
#*choose "Use Foxit Reader plugin for Mozilla (in Firefox)'
#**if the full name does not display, place the cursor over the item to see the full name in a tooltip box
#Test on a pdf file from the internet
#*If there is no toolbar at the top of the PDF display in the tab (just a blue strip), tap the F8 key to get the Basic toolbar, or right-click the blue strip at the top to display/not display other toolbars by clicking on them (checked=display; un-checked=do not display)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How do I make PDF with layers that can be turned on and off?

I am creating a map in Indesign CS4 and I want to have different layers that can be turned on and off. Layers like different places and names that can be controled in Acrobat (and Reader). Im not sure how to go about this and if this is something created through Acrobat or through InDesign. I didnt see anything in ID when converting to a PDF that would save layers in that way so I assume its done in Acrobat Pro? Just need and idea of where to start

InDesign CS5 to Acrobat 9 Multimedia and Interactive Workflows by Dona Baker
Creating and Using Layers (OCGs) with Acrobat JavaScript by Thom Parker

While downloading the latest IOS update to my iPhone 4, my phone went into a frozen state with the update 2/3's complete. It's remained like this for the past 12 hours. I can't turn the phone off, and I can't connect it to iTunes. Anyone know what to do?

While downloading the latest IOS update to my iPhone 4S, my phone went into a frozen state with the update 2/3's complete. It's remained like this for the past 12 hours. I can't turn the phone off, and I can't connect it to iTunes. Anyone know what to do?

If the place of purchase does not have a 'Lemon' policy (three replacements = refund or complete exchange), sadly you are out of luck.
And Apple themselves do not have any power over what policy a reseller uses. You can call Apple Care and have them replace it, but the odds are you would probably get a standard replacement again like has previously happened. I'm pretty sure Apple holds their own sort of 'Lemon' polocy where if it's been replaced three times through them they'll swap it out for a brand new phone. Not 100% sure though, best bet is too call them again.
And it ***** getting a response like that from their support personel, but hey, they can't all be that bad can they? I'm sure if you plead your case they'll try and help out. I've dealt with them in the past and had one or two people that rubbed me the wrong way, but most of them have been a great help and kept me a happy customer, haha.
Regards,
ThatGuy

HT4623 can somebody help with my ipad i can't turn it on, there is a message on the screen says not enough storage ipad cannot be backed up because there is not enough icloud storage available.

i can't turn the ipad off or on a need help

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts, so you will be able to use the iPad again

Can not turn the passcode off on my iPhone4

Can not turn the passcode off? Please help to solve this problem, thanks!

If it's a personal iPhone rather than a corporate one. Go to settings, then general, then passcode. You will need to know your passcode and enter it, you will then be presented with the option to turn it off.

Bootcamp 2.1 with WIndows XP SP3 can't turn keyboard light off

Similar Messages

Maybe you are looking for