Bootcamp 2.2 instalation files corrupt

Please help, I've been trying to get the trackpad of my macbook pro to fully work. I read I needed the bootcamp update 2.2 (I'm currently running 2.1 on windows xp pro) And every time I download it (from apple website) and try to install it this annoying message shows:
Some instalation files are corrupt, please download a fresh copy and retry the installation.
What can I do?? where can I get an uncorrupted file if not from apple itself???? PLEASE HELP ME.

Hi and welcome to Discussions,
although stated otherwise, the BCUpdate is exactly that: an update which requires the BootCamp Drivers/Control Panel 2.0 to be installed.
I have yet to see someone, who was able to use it as a standalone Driver installer.
In VMWare Windows it can't find the BC 2.0 (not installed) nor can it find it on a Dell Windows.
And since it is a Windows program, it won't run in Mac OSX.
Also keep in mind, that the BCUpdate is from Aril 2008. So if your Mac is younger than that, you might not even need it for your BootCamp Windows, since your installed drivers are newer than the update.
Regards
Stefan

Similar Messages

Download of firefox and adobe flash will not install file corrupt message

cannot install firefox or adobe flash get file corrupt message:
cannot play videos

Try installing from the Offline Installer. It may be a temporary folder permissions error, so this may fix it. Here is a link to try to download from:
http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
If that doesn't work, try this one: http://www.filehippo.com/download_flashplayer_firefox/
Let me know if this works!

BootCamp 2.1 XP File corrupt

Hi,
I'm trying since several days to download and install the "Bootcamp Windows XP Drivers Update 2.1". The download seems fine, but on 2 computers in 3 different OS (VMWare Windows on MacBook Pro, Windows on Dell Laptop and OS X on MacBook Pro) I get the message the file would be corrupt or nothing happens if I run the "BCUpdateXP.exe" archive to extract.
Let me mention that I'm an Unix Specialist, I always thought I know what I do. Any ideas or is the file just broken?
Regards
null

Hi and welcome to Discussions,
although stated otherwise, the BCUpdate is exactly that: an update which requires the BootCamp Drivers/Control Panel 2.0 to be installed.
I have yet to see someone, who was able to use it as a standalone Driver installer.
In VMWare Windows it can't find the BC 2.0 (not installed) nor can it find it on a Dell Windows.
And since it is a Windows program, it won't run in Mac OSX.
Also keep in mind, that the BCUpdate is from Aril 2008. So if your Mac is younger than that, you might not even need it for your BootCamp Windows, since your installed drivers are newer than the update.
Regards
Stefan

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

HT201210 I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files. I also uninstalled iTunes. Now whenever I try to install iTunes, I ge a message that saya, "An Apple Application support is

I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files. I also uninstalled iTunes. Now whenever I try to install iTunes, I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
Tried it 2 times and no luck. Any advice for me?
Maureen

I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

N97 file corrupted when installing files

My N97 was working well untill yesterday when I tried to download something from ovi store. It asked if I wanted to install the newest version of the store which I tried to do but it keeps saying 'file corrupted' and cancels the installation.
This message is coming up with every file I try installing now, either by downloading it from the older version of ovi store, or by installing through ovi suite.
I've also noticed Ovi Maps no longer loads if you try starting it up. It does nothing!
I tried installing the newest version of Ovi Suite, but its asking to install sms ds plugin 1.14 to my phone which then says file corrupted.
Anyone have a solution, or have I got to do a full reset of the phone? (Hopefully I can still get a backup with ovi suite)

i have the same problem and it's been bothering me for a while now, how can i solve it ?

Can't install downloaded CR XI Developer from SAP - file corrupt?

The file is .zip file download that will not install. It gives me an error:
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.
I'm running as an domain admin on a w2k3 server... I have permission, I even double checked. Is this file corrupt?
Item is: 7008028-1T2 Crystal Reports 11 Dev Win NUL 1-2 Units

Try this link: http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
click on the link in the middle of the page and then filter on CR XI Release 2. Or Release 1 if you really need it. CR XI R2 is a free upgrade from XI R1.
Get Service Pack 4 full build and then SP 6 and use your keycode to install.
Or try a different browser to download it.
Thank you
Don

N79: "File Corrupted" error while installing .sis/...

Hi:
I have been using Nokia N79 since Dec 15, 2008. I am facing problem while installing software with .sis/.sisx extension [for example fringe, putty and so many different softwares]. Everytime it's showing "File Corrupted" error, even if I download the software from Nokia Authorized sites. Please note My Application Manager settings are as follows: Software Installation: All, Online Certification Check: Off, Deafault Web Address: Nil. Installing files with other extensions [except .sis/.sisx] are ok with me.
Please help me in this regard, as it's becoming really painful for me day by day.
My System details:
Nokia N79
Software Version: 10.046
Date: 07-10-2008
Custom Version: 10.046.53.1
Date: 07-10-2008
Type: RM-348
Thanking you.
regards,
Shaheen

if you download things from sites like mosh etc, those files sometimes do get corrupted. it is best if you actually try to download them from the source and the ones that you can install via pc, install via pc maybe that will make a difference for you. you can go to fring site and fring will send you a text message, now once you open the link this app should download without any problems. and yes your are right it is highly unlikely that it is a hardware issues. try that and report back.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Windows install file shows as corrupt and will not download

Firefox stopped working, so I tried a clean install, but the install file will not download. I get an error message stating the file is corrupt.

Did you do the download from here?
'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}
What program is giving you the warning, and what does it say?

N8 "File corrupted" when installing apps

I recently made a reset on my Nokia N8, using *#7370# command.
After the reset I'm not able to install any application to the phone. When I start the installation (e.g.: Ovi Store), the "File corrupted" error message appears on the screen. I tried different applications but the same happens.
I tried re-installing the firmware, and doing Factory reset, but none of these helped.
Anybody having the same issue?

if i understand well you have install the firmware via pc 2 times and did not help
then try one more time with out hard reset, if still nothing you may need go at nokia care
dont know more detailed infos cos never involved so deep but seems the installing part or qt files or applicationswhich helps to install has been damage or missing (after hard reset) and updating the software not help because phone after update is restoring back (something like back up) the previous setting

N85 says file corrupted when installing whatsapp

Hey all i really need some help here!!
I tried to install whatsapp from http://www.whatsapp.com/nokia/ but failed -"file corrupted".
i don't know what happened because the website clearly states that the app supports N85.
Another thing, Nokia Suite made me download the service controllers (no idea what that is) but i couldn't install that either, ágain, "file corrupted".
Is there something wrong with my phone?
THANKS IN ADVANCE!!! )))
Device:
Software Version 31.002
4-11-09
Custom Version 31.002.208.4
24-12-09

Hi Crumpetgirl,
Welcome to Nokia Support Discussions!
Have you tried downloading Whatsapp directly from Nokia Store, you can find it here. You can download it directly on your mobile using the Store application or connect your phone to Nokia Suite and download it through there.
If the problem persists, try to re-install your phone software by selecting Tools > Software update on Nokia Suite.
Hope this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Bootcamp Windows 7 install with no Superdrive - Working Method

After lots of experimenting to get Windows 7 installed on my 2011 MBP with no Superdrive, I've finally found a solution.
Normally reserved for Macbook Airs, it's possible to enable the "Create Windows 7 Install Disk" option in Boot Camp Assistant 4 by following this method:
http://discussions.apple.com/message/17365855#17365855
This will allow usb creation to work, but without proper firmware version on your machine, you will reboot to a black screen that says "No bootable device found" when trying to use bootcamp assistant.
All of the workarounds that worked in 10.6 seem to be broken in 10.7. I tried:
-4 different USB media, as some reported certain USB media will work.
-mounting a VMware image of a windows 7 install, but VMDKMounter and MacFuse are broken in 10.7
-using winclone to restore a previous bootcamp image from my old MBP, which only got me to BSOD
-using my windows image to format a partition, which returns invalid argument errors in disk utility
I didn't try rEFIt, as I read lots of reports of its incompatibilities with Lion, and disk corruption.
The solution that finally worked was to create a 5gb FAT partition on my internal hard drive, and copy all of the files from the Bootcamp USB windows install.
Upon reboot, since it was still attempting the windows install, it found the partition, booted and worked flawlessly. This might also work by simply copying the files from your Windows 7 image, but I think there may be a little trickery done in Boot Camp Assistant to make sure the EFI recognizes it properly.
I've only tried this on my system, but after 2 days of messing around to get this working, I wanted to post my results as I'm sure I'm not the only one in this situation.

Ok thanks for pointing out that i need to use NTFS instead of FAT.. And the order of partitions..
I----------OSX----------I I------Windows----I I---Install---I
My only issue now.. ( atleast i think it is my only issue )
Im a noob at this, so please dont get mad.
But as i understand, you are using the information in this link
http://discussions.apple.com/message/17365855#17365855
to bypass (Or Un-grey) the "create a usb" option.
Now my only issue is that there is no "create a usb" option, i have
"download the latest windows support software from apple"
And
"install Windows 7"
I stuck... ive tried remote disk, rEFIt, installing from usb, installing from dvd.
Dont know where else to go.
Once again, thanks for your help.

Is there a cure for persistent file corruptions across the suite?

i am having terrible and consistent problems with file corruptions across the suite. for example…
1: i collected for output (indesign) – corrupted over 100 small images that were linked.
2: opened an indesign job and all linked files failed to update and could not be imported (simply would not import those files and were all corrupted).
3: had a hang in photoshop followed by a 150:30 error (would not open any of my applications). this prompted a clean install of system and adobe cs4 see below
4: most recently, had a hang in photoshop (photoshop will also no "force quit") whilst indesign was open. two of my image files corrupted and, most surprisingly, all my illustrator files that i had placed also corrupted (will not even open in illustrator any more). illustrator was not even running at the time, so, get this – a hang in photoshop destroys illustrator files simply because they are placed in indesign.
this last event has made me more certain than ever that there is a fundamental problem at the cs4 core.
can anyone help?
please note the following:
i am running a macintosh imac, 2.66 GHz Intel Core 2 Duo (latest imac), with 4 GB 1067 MHz DDR3 ram.
before this last disaster, i had reloaded the system software (archive and install), and updated it all the way to version 10.5.8
i then uninstalled the creative suite, ran the cleanscript from adobe, reloaded the creative suite, downloaded all the cs4 updates
(so, latest mac, latest system, latest cs4 – all clean installs).
is there something i can do? or is this just a very unstable and disappointing upgrade – i have had nothing but problems from day one!
many thanks if anyone has any advice.

Re: 150:30 error:
Please try this KB article's solutions, and report back on how it went for you. If you can provide details about any recent OS updates, backups, or migrations, that would help is nail down the root cause of the new rash of this error for Mac users recently:
http://kb2.adobe.com/cps/512/cpsid_51260.html

"FILE CORRUPTED" error message on N 78

My phone is a Nokia N78 and my problem is as followed:
Before updating the firmware from version 12 to version 20, I had google maps installed. After updating over the air, google maps (and also several other apps) got removed. When i tried to download and install google maps again and tried to install it again, it keeps saying "file corrupted". The same goes with other apps i try to download and install. But I have no trouble installing java apps.
I am wondering if anyone knows how to solve this problem?
Solved!
Go to Solution.

you are very welcome i am so glad that you got your issues sorted. i know how frustrating it can be to have a phone and potentially no 'way out'. been there and done that, that is why i joined this forum i wanted to learn more and find more answers to some questions. technology in general can be frustrating and its ever changing so we have to keep up or we will drown in frustration be well, rad.
ps. and you are correct, i am no expert, my solution is not expert either more of a been down this road solution. i am just another user on this forum that sometimes gets the right answer
Message Edited by radical24 on 19-Jan-2009 07:54 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

File corruption with a very large .ai file

A little background first:
I am a graphic designer/cartographer with 15+ years of experience. I started making maps in Illustrator with version 6 and have upgraded to every version since.
My machines:
2x Mac Pro 8-core 3.0GHz, 16GB RAM, 10.5.7
Mac Pro quad-core 2.66GHz, 8GB RAM, 10.5.7
MacBook Pro 2.0GHz, 2GB RAM, 10.5.7
Illustrator specs:
All machines have CS4 installed as well as Illustrator 10.
The 8-core MPs have the MAPublisher Plug-ins installed
The 4-core and MacBook Pro (MBP) does not have the MAPublisher Plug-ins
The problem I am having can be replicated on each of the machines. The MBP can't handle the file due to RAM. Since this occurs on machines that has MAPublisher installed and a machine that does not, I think we can rule out a plug-in issue.
File specs:
The original file: version 10, file size (uncompressed, no PDF support, and no font-embedding) is 36.4 MB. There are no raster effects or embedded/placed images. This is strictly a vector file. Artboard Dimensions: 85.288 in x 81.042 in
The original file, converted with CS4, and then saved as a CS4 file: file size (uncompressed, no PDF support, and no font-embedding) is 97.9 MB.
Brief Description of the problem:
I have tried to convert this file into every version of CS and it has failed every time. With each version, it has resulted in an unusable file for different reasons. CS-CS3, the file was completely unusable because of the opening/saving time. It could take as long as 3 hours to save the file. With CS4, this has been rectified and I once again tried to convert it. Upon re-opening of the 'converted' CS4 native file, the file is 'corrupted'.
The file corruption is not your regular "This file can't be opened because of: X" corruption. The file opens after a save/close just fine. It is just that parts of the file gets destroyed. To save space in this post, I have created a webpage that illustrates the problem that I am having:
http://newatlas.com/ai_problem/
I have tried everything possible to make the file smaller and it is as slimmed down as I can make it. (Using symbols, styles, etc.) I have also tried to eliminate this as a font problem by replacing every font with an Adobe supplied font, cleared caches, etc. This does not work, so I think we can rule out a font issue. I have also reduced this file to contain no pattern fills, no gradients, and just used simple fills and strokes. All to no avail. I have also tried piecing the file back together into a new document by copying/pasting a layer at a time. Saving, closing and re-opening after each paste cycle. I can get about 95% of it put back together and then it will manifest the problem. The only thing I haven't done is to convert all of the type to outlines. This would not solve my problem since this is a map that I continually work on year after year. I also can't remove objects or cut the overall area of the map because this file is used to produce an atlas book, a wall map and custom boundary wall maps. You can view the entire file at:
http://okc.cocpub.com
If I do not convert the legacy text, the file saves/closes/re-opens just fine. It just takes a very long time. So this leads me to think that the cause of the problem is the number of editable type objects that this file has. Ever since Adobe changed the Type Engine, I haven't been able to use this file in current versions of Illustrator.
If I could get this file to open, uncorrupted, I could finally get rid of Illustrator 10. Illustrator 10 does not have any problem with this file (and is still faster than CS4 in everything except selecting a lot of objects.)
I am posting this on the forums for any other opinions/ideas from the 'Illustrator Gurus' as a first step. I want to get in contact with someone at Adobe to see if we can address this problem and possibly get it fixed with CS5. I know that this is a user-to-user forum, but I'm not sure who, where and how to contact Adobe for this issue. Maybe someone on these forums can help with that as well.
Thank you for your patience for getting this far in my long post and I would really appreciate any response.
Dave

Thanks Wade for responding,
Did you try trashing your Adobe Illustrator CS4 Settings folder in your User's Preferences?
Yes, I've tried deleting prefs. Basically I've tried to rule out any problems with Illustrator as a whole. This issue has also occured on a clean install of OS X and Illustrator on a new User Account with the opening of this file being the first task that Illustrator has. There is no problem with Illustrator per se, but I think it is more of a limitation in Illustrator based on the number of type objects.
You could also try saving it out of 10 as a pdf or as postscript and distilling it then open that in ai or place it id a blank AI document.
Did you try to place instead of opening it?
I haven't tried any of these since the resulting file would be utterly unusable. Basically this would create a 'flat' file with 'broken' strings of text (type on a path especially) and type being uneditable. (Now that I think about it, CS4 does a much better job of opening pdfs without breaking type.) I still think this approach is not really a prudent course of action since, as of now, I can continue to maintain this map in Illy 10.
In my experimentation, the results are as follows:
1. Opening the file without updating the legacy type, saving the file as a new document, closing and then re-opening results in a file you would expect. Every object is where it is supposed to be. Downfall of this method: I absolutely need the type to be editable, especially the 'Street Type' since this type is actually used to create map indexes.
2. Opening the file with updating the legacy type, saving the file as a new document, closing and then re-opening results in a file that exhibits the exact behavior that has been posted in the thread-starter. This method results in the 'Bruce Gray' type being the duplicated item.
3. Opening the file without updating the legacy type, then splitting the file into layer groups and saving as separate files. Then opening the resulting CS4 files, updating the legacy type, copy & pasting (with layer structure) into a new document results in a usable file up to a point. I can get about 95% of it put back together and then the problem manifests. I have thought that it might be a "bad" object on one of the layers but I have ruled that out by: a.) All of the resulting sub-files (files that are portions of the larger) exhibit no problems at all. Usually our PS printers find issues that Illy does not and there is no problem in RIPing the sub-files. b.) If I change the paste order, meaning copying & pasting from the top-most layers to the bottom-most layers, vice-versa, and a completely random paste order, different objects (other than the 'Bruce Gray' type) will be duplicated. I've had one of my park screens, a zip code type object and a school district boundary be the duplicated object.
All of these experiments has lead me to believe that the Illustrator Type Engine is the main facilitor. I just don't think it can handle that many individual point type objects. I know CS4 can handle the number of objects, based on the fact that a legacy type (non-updated) file works.
I am almost entirely sure that Illustrator is working exactly as it is supposed to and that the vast majority of Illy users will never run into this issue. This file is by far the largest file that I work on. I would just like to be able to use an Intel native version of CS to continue maintaining this map.
On a side note: About three years ago, I tried working with this file in Freehand MX. Freehand initially would open the Illy file without a problem. I could work on it but when I would save it as a Freehand file, close it and re-open it, I would get your standard File Corruption. It would partially open, give me a corruption dialog, and open the file as a blank document. I alwa ys knew there was a reason to use Illustrator over Freehand for making maps.

Bootcamp 2.2 instalation files corrupt

Similar Messages

Maybe you are looking for