Bootcamp 5.1.5621 - power saving not working

I've this mac: iMac 27 - mid 2010 - 11.3 : S/N CK0390HUDNR - Boot Rom IM112.0057.B01 - EFI 1.8 SMC 1.59F2
With latest bootcamp, power saving not working !
I enable the display power off after 10 minuts
Display power off BUT there's no way to power on !
Apple... any help ?? (hoping some apple tech looking discussions..)
Regards
Mauro

look on the page
it list which macs the zip support
if yours in not on the list use
is it on the list? Boot Camp Support Software 5.1.5621
or is it on this list Boot Camp Support Software 5.1.5640

Similar Messages

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Power button not working

iPopd touch 4th generation sleep/power button not working.
Any ideas? how long is warranty?

The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
Apple - Support - Check Your Service and Support Coverage
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

HT4061 i left my ipad 3 as i will go to work when i came back from work and able to used my ipad power is not working and the ipad is warm i didnt left the ipad charging.... so i tried to again and outting it on its not working now. pls do the needful

I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful. thanks a lot

I bought new ipad3 last week yesterday I left it on bed as I will go to work. When I came back and able to used it power is not working and feel the ipad get warm and feel let it cool down and try it again its not working at all. Kindly pls do the needful. thanks a lot

Dv6 power led not working

Hi everybody!
Today, I changed the fan in my Pavilion dv6-6001eh (the original stop working). After I assembly, the power led not working anymore. I check the cable, but that's ok. Otherwise the power button working. The second power led in the right side next to USB, also not working.
Why? Maybe pressed hotkey?
Thank you.

Any advice?

HT1688 Power button not working

Power button not working on iPhone 5

This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
Other threads about this:
https://discussions.apple.com/message/23797113#23797113
https://discussions.apple.com/message/23258974#23258974

Power button not working - officejet pro 8600 +

Hi,
I just find this problem today (after 1 year of using my officejet pro 8600+) but maybe, it's normal ....
When the control panel is opened, the light on the power button is off and the power button stops working (not possible tu turn the printer on or off) but when the control panel is closed, the power button works as expected !! is this normal ?? I just find this issue today.
Thanks for any answer,
sincerly,
Domi.

Could you provide a few more details? Do you mean the control panel on your computer? How is the printer connected - Wireless LAN, LAN or USB?
I have never noticed this with mine, but I usually leave the printer on all the time and let the power saving put it to sleep automatically when not in use.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Bootcamp "no bootable device" Option key not working

Ok recently rebuilt 2 older "Intel Core Duo" Mac Mini's with SSD drives. They work great and have been flying, however on one of them I wanted to setup BootCamp so that I could run Win7 Pro on it as well.
So here is what I did...
- When I first built the Mini's I used a bootable Firewire drive with Snow Leopard installed
- I had the drive divided into 2 partitions at first
- when I tried to install BootCamp error message kept telling me it needed only one part, so I finally made Primary OSX part one big part, then I was able to get BootCamp going
- I choose "I have Mac OSX Install disc" because "Download the Windows support software" would not work
- Next it created the BOOTCAMP part and told me to put Win OS disk in drive
- I put in an OEM Win 7 CD I borrowed from work, so I could see how it worked.
- When it rebooted, it Did not recognize CD and all screen said was choose Option 1 or 2, (neither option had any text, and the keyboard would not take any input)
- Tried numerous times to get back to OSX, used every boot option I could find online but none would work.. Also Mini would not give back CD for nothing
- Next I opened up Mini to get to CD, I had a friend that was able to get one out by opening up the actual dvd drive but I was trying to avoid that. So what I ended up doing was using a putty knife to keep CD from spinning on bootup. After about 10 to 15 seconds of the CD not spinning, it finally kicked it out for me. (YAY!!)
- New problem, now I have the "No Bootable Device - - Insert Boot Disk And Press Any Key"
- I have tried the following. Removing the drive and plugging in a Sata to USB cable so I can access it from other Mini
- I thought that if I deleted the BOOTCAMP part it would allow me to boot back to OSX, I tried renaming Part to what it was before, I have tried putting in a Formatted drive with no OS on it, I have tried installing the contents of a Win 7 OEM CD onto Formatted drive as a single FAT part.
Nothing Works, I am either stuck at the "No Bootable Device" screen, or if I turn on Firewire drive with Snow Leopard I get a blinking cursor that never shows any text.
At this point, I don't want BootCamp on that Mini anymore, I just want my working OSX, but I cant get anything to work and I'm afraid to stick a CD in the Mini for fear it wont give it back to me and I end up damaging it getting it out. I even created a CD with rEFIt on it, but after I formatted a totally different drive and the Mini is still expecting to finish what it start with BootCamp, it leads me to believe that there is some BIOS or data stored somewhere that is not on the harddrive. If so, could I pull the RAM, or push some sort of master Reset button some where?
I'm also thinking that I need a non mac USB keyboard, perhaps maybe there or know Aluminum Keyboard drives in the memory where the Mini is trying to finish the BootCamp install.
As a side note, I sure wish Apple would have designed the Mini to fail Safe not fail broken.
Please Help.
Randy

The Formatted test drive did not have Any OS on it. I just thought that since that was how I installed it originally, that it would work.
I put in SSD straight out of package, connected Firewire drive with SnowLeopard install, and it booted to it and asked me for to install to which drive, I choose SSD and it took off..
So what your saying is, do the same thing but hang SSD from broken Mini onto working Mini and boot up with same Firewire drive, and have it install OS back onto Broken SSD drive.
Assuming all of this works correctly, why would plugging it back into broken Mini work? Wont the Broken Mini still be looking for BootCamp to finish what it started? (just seems that way from what I've experienced so far)

Power button not working like it should...

When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

Try a soft reset and see what happens.
If the power button is not working, here is a link for a program that remaps the power button on your TX so you can hard reset and power off.
There is a program called PowerBtn 2.0. This allows you to turn off the device when the power button does not work. (Thanks to Computerwiz for the info.)
Click on the following link for the website.
http://www.canuck-software.ca/
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

IPod touch 5th gen. Home button stuck and power button not working! Please help!

I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Power button not working in Ideapad Flex14

power button of Ideapad Flex14 is not working, i have to boot using the Novo button.
the Volume Buttons on the side of the laptop also doesnot work.
the Windows button the Screen (the windows hardware button on the display) also doesnt work.

hi bundela,
Welcome to the Lenovo Forums.
Just to verify, is the power / volume / Windows button sunk?
If not, it's possible that the Function Board / Win8 Button Board is malfunctioning and you may need to contact Lenovo for service.
- LInk to picture
- Link to picture
Toll Free No.: 1800-3000-5366 / 1800-419-7555
Hours of operation: 9AM - 9PM / Monday - Saturday
Hope you get the computer fixed soon.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Power button not working on iPhone 4s then starts to work

Power button stopped working for a while then started working again. Has not happened before...

OK, thanks for sharing.

Power button not working on iphone 5

Power button seems to be not working more than it is. I'd thought it was a poorly fitting case, then I thought it was just intermittent (talk about denial!) Do people think it's a trip to the Apple Shop or is there a quicker, house based solution?

Hey,
That is a hardware issue and needs to go to repair centre.
I had the same issue and when I finally had enough and decided to go to Repair Centre(that was today), i realised that my warranty is over by 6 days.
I would def get it looked at as soon as possible.

Power button not working on TV -DVD

Green power light stays lit, but power button does not work on TV with DVD player, model number 23HLV87. Set was purchased in 2008. Also, beeping sound soon after power comes on.

Try leaving it unplugged overnight. Then try it again. If the problem persists, it may require servicing.
- Peter

Bootcamp 5.1.5621 - power saving not working

Similar Messages

Maybe you are looking for