Bootcamp 64 bit for MacBook Pro 13" 2010?

When inserting my Snow Leo disk, it says 64 bit isn't supported for this device.
There is however a 64 bit update for the same device in the downloads section of Apple.com, but I can't install that.

It's now installing by using this little workaround:
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang= en
I find it weird that I have to use that workaround, because my Mac is on the list of supported devices.
Hoping it works.

Similar Messages

Need OS disk for macbook pro mid 2010

The hardest part of holding on is letting go. This is how I feel about my MacBook pro mid 2010 edition. I have been having issues with it so I neglected it for some time. I put in a new hard drive and then installed Yosemite. It runs a little slow but works great for Netflix and other non required uses. The problem I am having is that the processor pegs at 100% randomly. I don't see anything under the monitor using the cpu so I am wondering if I have a hardware issue. When I hold down the D key at bootup I thought it would start diagnostics but it doesn't. My research tells me I need to install the original os but I can't find the disk.
Thoughts?

Niel,
See if you can help this person: MacBook Pro late 2011 won't start up.

Buy new battery for MacBook Pro Mid 2010, and in-store installation?

I need to buy a new battery for my MacBook Pro Mid 2010. I was wondering if there was an Apple store where I can buy a new one and have it installed there. i tried Best Buy and they weren't really any help and suggested to go to an Apple store. However, I don't know if I could have them install right there.

its best to make an appointment at your local Apple store. If they are busy and you walk in without an appointment, they will turn you away.

I want to change my HDD to SSD for macbook pro 15 2010 need some help

i want to change my HDD to SSD what will work with my macbook pro 2.66GHz (15-inch Unibody w/Intel Core i7) - April 2010 and do it will make my macbook pro low timp and do my macbook pro will be more faster ?

Personally I am not a fan of SSDs because they are not cost effective for my personal requirements. However I do recognize that the days of the disk are numbered, but I suspect that day is still a few years off.
Crucial is a fine company and is one of the two I personally recommend for RAM (OWC being the other) so I suspect that would be a good choice to make. They are a consumer responsive company. Indeed the Amazon price is attractive but before you commit yourself, see if you can find test information and reviews on this product.
I personally cannot give you first hand information on SSDs because I have none of my own. But perhaps some one will read this post and chime in.
Ciao.

Windows 7 Pro or Home, 64 or 32 bits for MacBook Pro 13"

Windows 7 Pro or Home, 64 or 32 bits, for Boot Camp in a MacBook Pro 13" 2012?

In addition to 64 bit get Windows 7 Pro version as you can add XP mode free.
XP MODE/WIN 7
http://www.microsoft.com/windows/virtual-pc/download.aspx
http://windows.microsoft.com/is-IS/windows7/products/features/windows-xp-mode
http://windows.microsoft.com/is-IS/windows7/install-and-use-windows-xp-mode-in-w indows-7

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

TS4088 why is there a limit on 3 years? it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today :(

it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today

Hey Clintonfrombirmingham
I called Apple technical support in Denmark, but with no positive reply.
She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
What can i do now?
best regards Oskar

How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?

Hello everyone,
I am facing a problem with bootcamp on my Macbook pro 15" (Mid 2010, running Mos OS 10.6.6).
I have successfully installed windows 7 via Bootcamp, but I lost the Drivers DVD furnished by Apple.
I tried to download these using Bootcamp (v3.0.4), but bootcamp won't let me save it, i get this error :
"the windows support software could not be saved to the selected folder"
An Apple support article has been made for this problem ( http://support.apple.com/kb/TS3648 ), but it doesn't solve the problem in my case because I lost the furnished DVD.
So here I am, struck on this drivers issue...
So, my question is :
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Thank you for your help !
Regards

Aw, and I forgot, being in Thailand, they do not sell the installation DVD.

BootCamp 5.0 error on 13" MacBook Pro Mid-2010: "Installation Error. Boot Camp x64 is unsupported on this computer model"

Installing Boot Camp 5.0.5033 (downloadable at http://support.apple.com/kb/DL1638) on Windows 8 x64 on 13” MacBook Pro Mid-2010 using BootCamp\setup.exe, I get the following message: “Installation Error. Boot Camp x64 is unsupported on this computer model”.
According to http://support.apple.com/kb/HT5634, Windows 8 x64 is not supported by Boot Camp 5 on 13” MacBook Pro Mid-2010 .
Previous version, Boot Camp 4.0, causes bluescreens on Windows 8 (https://discussions.apple.com/message/20131524#20131524).
Fortunately, it might be still possible to employ updated Boot Camp by launching “msiexec /i BootCamp.msi” from BootCamp\Drivers\Apple folder using administrative command prompt (http://technet.microsoft.com/en-us/library/cc947813%28v=WS.10%29.aspx).
However, new Boot Camp 5.0.5033 does not contain all the drivers for 13” MacBook Pro Mid-2010. E.g. driver for NVIDIA nForce System Management Controller (labeled Other devices/Coprocessor in Control Panel) and NVIDIA nForce PCI Systems Management (labeled Other devices/SM Bus Controller in Control Panel) must be obtained at Drivers\NVidia\NVidiaChipset64 in older Boot Camp 4.0 (downloadable at http://support.apple.com/kb/DL1634)
According to Microsoft (http://windows.microsoft.com/en-US/windows-8/system-requirements), the MacBook Pro config (Intel Core 2 Duo P8600 2.4GHz, 4GB RAM) exceeds Windows 8 x64 hardware requirements. Windows Experience Index for this laptop is approx. 5.1 (http://windows.microsoft.com/en-US/windows-8/what-windows-experience-index).
Does anybody know, is there any technical reason why Windows 8 x64 is not supported by Boot Camp 5 on 13” MBP Mid-2010?
Is there a specific hardware/firmware deficiency in this MacBook model, incompatible with Win8? Maybe NVIDIA refused to provide Win8-compatible drivers for its chipset components (GeForce 320M graphics card though is still supported by latest notebook drivers available at www.geforce.com)?

Thanks for the detailed explanation! If MacBook supports AHCI/SATA only in native “UEFI mode”, while reverting back to PATA/IDE in legacy “BIOS mode”, then it could make perfect sense to use UEFI to make sure that technology like Native Command Queuing (NCQ) is employed, as it may give noticeable performance improvements for certain operations: www.happysysadm.com/2012/12/intel-g530-nas-performance-part-3.html. I wonder how do you get Windows 8 x64 with EFI bootloader installed on MacBook?
Simply choosing EFI Boot (“Some EFI platforms support both UEFI and BIOS firmware. On some of those systems, it is not always clear if the default DVD boot option is an EFI or BIOS boot option. On these systems, using the EFI shell command may be required. If you do not specifically start Windows Setup by using the EFI boot entry, the default firmware boot entry for BIOS may be used. If Windows Setup starts in BIOS mode on a combined EFI/BIOS system, the ESP and MSR partitions are not created.”) from Win8 x64 DVD when installing on blank HDD would yield “The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed" message. Also, if the hard drive was not in SATA mode during Windows installation, registry tweaking may be required before switching from PATA to SATA. Do you do registry tweaking and EFI bootloader configuration manually after a copy of Windows was installed in its dedicated partition in a regular way?

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Macbook pro late 2010 battery at 24 cycles for 15 weeks computer and capacity is already 93%, anything wrong?

macbook pro late 2010 battery at 24 cycles for 15 weeks computer and capacity is already 93%, anything wrong?

How many cycles depends on how often you drain the battery down low and then recharge it to maximum, ideally use it a little less on battery and a bit more on mains and the cycle count will slow down. Every couple of months you need to re-calibrate the Battery for best long term results.

MAXIMUM RAM for MacBook Pro Core 2 Duo Mid 2010

What is the MAXIMUM RAM for MacBook Pro, 2.4 GHz Intel Core 2 Duo, Mid 2010 - 24MC374LL/A, running OS X 10.8.2 (12C60)?
I tried to search for this but was unable to find anything.
Apple Specs say 8GB, but I was just told by someone I THINK would know, that you can actually go up to 16GB.
This would be an enormous improvement to my workflow if true.
Anyone out there know for certain?
Making sure before I buy (or NOT!)
Thanks.
Jerry G

I just found this post and I realize this is a late response but maybe it will help others.
Based on recent circumstances I just happened to have two 8GB DDR3 modules collecting dust. Having an old trusty MacMini as my media center, server among other things and whatnot, I was curious if I could bump this little thing to 16GB. In doing so I found this post and verified with OWC.
End result:
Booted with no issues, and is running nice and smooth. Should be noted that just adding 16GB of RAM to a Core 2 Duo will not make the machine lightning fast or become some amazing computing platform. It will just make the box run a bit quicker and give you the ability to have more applications open before you begin to note some lag.
However this is really nice to see:

How do I get more memory for my Macbook Pro Spring 2010 13-inch with 2.66GHz Intel Core 2 Duo?

How do I get more memory for my Macbook Pro spring 2010 13-inch with 2.66GHz Intel Core 2 Duo. Apple says no memory currently available for that model. I have 4 GB memory and 3.99 used. Help!

macette1976 wrote:
Now I'm confused. This is the one Crucial told me to get:
CT3309356 - 4GB DDR3 PC3-8500 Unbuffered NON-ECC 1.35V 512Meg x 64
$45.99
Also what do you mean that actual memory is 16GB but with Apple it's 8?
When I go to the "About this Mac" it says Memory 4G 1067 MHz DDR3, then when I go to System Report it says
Memory Slot
Bank 0/ DIMM0 2G DDR3 1067 MHZ OK
Bank 1/ DIMM0 2G DDR3 1067 MHZ OK
Sorry I'm clueless. Just don't want to buy something that messes up my machine more than it already is.
The Crucial site appears to have recommended the correct spec 4gB RAM stick for your model. Please note that you will need to remove the existing sticks of RAM to install new, so you will need 2x4gB to get to 8gB.
When your model of computer was designed/built, it was tested with readily available 2x4gB (8gB). After release RAM retailers have tested it with higher amounts, and Apple didn't update their quoted specs.

HT204347 Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this m

Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this model?

Click on the Apple and then on about this Mac. In the new window, click on the "version 10.9.2" until you see the serial number displayed.

Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen. Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%

Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen.
Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%& !!!!
Back again to mini display to hdmi cable.
could you help me????

It is stated that mirroring requires recent hardware (2011 or later)
http://support.apple.com/kb/ht5404
However you can still use 3rd party solutions like Airparrot which do it via software

Bootcamp 64 bit for MacBook Pro 13" 2010?

Similar Messages

Maybe you are looking for